| Message ID | 20230413035541.62129-2-jack.zhu@starfivetech.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add StarFive Camera Subsystem driver | expand |
Hi Jack, Thank you for the patch. On Thu, Apr 13, 2023 at 11:55:34AM +0800, Jack Zhu wrote: > Convert DT bindings document for Cadence MIPI-CSI2 RX controller to > DT schema format. > > For compatible, new compatibles should not be messed with conversion, > but the original binding did not specify any SoC-specific compatible > string, so add the StarFive compatible string. > > Signed-off-by: Jack Zhu <jack.zhu@starfivetech.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > --- > .../devicetree/bindings/media/cdns,csi2rx.txt | 100 ---------- > .../bindings/media/cdns,csi2rx.yaml | 177 ++++++++++++++++++ > MAINTAINERS | 1 + > 3 files changed, 178 insertions(+), 100 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/media/cdns,csi2rx.txt > create mode 100644 Documentation/devicetree/bindings/media/cdns,csi2rx.yaml > > diff --git a/Documentation/devicetree/bindings/media/cdns,csi2rx.txt b/Documentation/devicetree/bindings/media/cdns,csi2rx.txt > deleted file mode 100644 > index 6b02a0657ad9..000000000000 > --- a/Documentation/devicetree/bindings/media/cdns,csi2rx.txt > +++ /dev/null > @@ -1,100 +0,0 @@ > -Cadence MIPI-CSI2 RX controller > -=============================== > - > -The Cadence MIPI-CSI2 RX controller is a CSI-2 bridge supporting up to 4 CSI > -lanes in input, and 4 different pixel streams in output. > - > -Required properties: > - - compatible: must be set to "cdns,csi2rx" and an SoC-specific compatible > - - reg: base address and size of the memory mapped region > - - clocks: phandles to the clocks driving the controller > - - clock-names: must contain: > - * sys_clk: main clock > - * p_clk: register bank clock > - * pixel_if[0-3]_clk: pixel stream output clock, one for each stream > - implemented in hardware, between 0 and 3 > - > -Optional properties: > - - phys: phandle to the external D-PHY, phy-names must be provided > - - phy-names: must contain "dphy", if the implementation uses an > - external D-PHY > - > -Required subnodes: > - - ports: A ports node with one port child node per device input and output > - port, in accordance with the video interface bindings defined in > - Documentation/devicetree/bindings/media/video-interfaces.txt. The > - port nodes are numbered as follows: > - > - Port Description > - ----------------------------- > - 0 CSI-2 input > - 1 Stream 0 output > - 2 Stream 1 output > - 3 Stream 2 output > - 4 Stream 3 output > - > - The stream output port nodes are optional if they are not > - connected to anything at the hardware level or implemented > - in the design.Since there is only one endpoint per port, > - the endpoints are not numbered. > - > - > -Example: > - > -csi2rx: csi-bridge@0d060000 { > - compatible = "cdns,csi2rx"; > - reg = <0x0d060000 0x1000>; > - clocks = <&byteclock>, <&byteclock> > - <&coreclock>, <&coreclock>, > - <&coreclock>, <&coreclock>; > - clock-names = "sys_clk", "p_clk", > - "pixel_if0_clk", "pixel_if1_clk", > - "pixel_if2_clk", "pixel_if3_clk"; > - > - ports { > - #address-cells = <1>; > - #size-cells = <0>; > - > - port@0 { > - reg = <0>; > - > - csi2rx_in_sensor: endpoint { > - remote-endpoint = <&sensor_out_csi2rx>; > - clock-lanes = <0>; > - data-lanes = <1 2>; > - }; > - }; > - > - port@1 { > - reg = <1>; > - > - csi2rx_out_grabber0: endpoint { > - remote-endpoint = <&grabber0_in_csi2rx>; > - }; > - }; > - > - port@2 { > - reg = <2>; > - > - csi2rx_out_grabber1: endpoint { > - remote-endpoint = <&grabber1_in_csi2rx>; > - }; > - }; > - > - port@3 { > - reg = <3>; > - > - csi2rx_out_grabber2: endpoint { > - remote-endpoint = <&grabber2_in_csi2rx>; > - }; > - }; > - > - port@4 { > - reg = <4>; > - > - csi2rx_out_grabber3: endpoint { > - remote-endpoint = <&grabber3_in_csi2rx>; > - }; > - }; > - }; > -}; > diff --git a/Documentation/devicetree/bindings/media/cdns,csi2rx.yaml b/Documentation/devicetree/bindings/media/cdns,csi2rx.yaml > new file mode 100644 > index 000000000000..aba1191b3e77 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/cdns,csi2rx.yaml > @@ -0,0 +1,177 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/media/cdns,csi2rx.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Cadence MIPI-CSI2 RX controller > + > +maintainers: > + - Maxime Ripard <mripard@kernel.org> > + > +description: > + The Cadence MIPI-CSI2 RX controller is a CSI-2 bridge supporting up to 4 CSI > + lanes in input, and 4 different pixel streams in output. > + > +properties: > + compatible: > + items: > + - enum: > + - starfive,jh7110-csi2rx > + - const: cdns,csi2rx > + > + reg: > + maxItems: 1 > + > + clocks: > + items: > + - description: CSI2Rx system clock > + - description: Gated Register bank clock for APB interface > + - description: pixel Clock for Stream interface 0 > + - description: pixel Clock for Stream interface 1 > + - description: pixel Clock for Stream interface 2 > + - description: pixel Clock for Stream interface 3 > + > + clock-names: > + items: > + - const: sys_clk > + - const: p_clk > + - const: pixel_if0_clk > + - const: pixel_if1_clk > + - const: pixel_if2_clk > + - const: pixel_if3_clk > + > + phys: > + maxItems: 1 > + description: MIPI D-PHY > + > + phy-names: > + items: > + - const: dphy > + > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + > + properties: > + port@0: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: > + Input port node, single endpoint describing the CSI-2 transmitter. > + > + properties: > + endpoint: > + $ref: video-interfaces.yaml# > + unevaluatedProperties: false > + > + properties: > + bus-type: > + const: 4 > + > + clock-lanes: > + const: 0 > + > + data-lanes: > + minItems: 1 > + maxItems: 4 > + items: > + maximum: 4 > + > + required: > + - data-lanes > + > + port@1: > + $ref: /schemas/graph.yaml#/properties/port > + description: > + Stream 0 Output port node > + > + port@2: > + $ref: /schemas/graph.yaml#/properties/port > + description: > + Stream 1 Output port node > + > + port@3: > + $ref: /schemas/graph.yaml#/properties/port > + description: > + Stream 2 Output port node > + > + port@4: > + $ref: /schemas/graph.yaml#/properties/port > + description: > + Stream 3 Output port node > + > + required: > + - port@0 > + > +required: > + - compatible > + - reg > + - clocks > + - clock-names > + - ports > + > +additionalProperties: false > + > +examples: > + - | > + csi@d060000 { > + compatible = "starfive,jh7110-csi2rx", "cdns,csi2rx"; > + reg = <0x0d060000 0x1000>; > + clocks = <&byteclock 7>, <&byteclock 6>, > + <&coreclock 8>, <&coreclock 9>, > + <&coreclock 10>, <&coreclock 11>; > + clock-names = "sys_clk", "p_clk", > + "pixel_if0_clk", "pixel_if1_clk", > + "pixel_if2_clk", "pixel_if3_clk"; > + phys = <&csi_phy>; > + phy-names = "dphy"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + > + csi2rx_in_sensor: endpoint { > + remote-endpoint = <&sensor_out_csi2rx>; > + clock-lanes = <0>; > + data-lanes = <1 2>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + > + csi2rx_out_grabber0: endpoint { > + remote-endpoint = <&grabber0_in_csi2rx>; > + }; > + }; > + > + port@2 { > + reg = <2>; > + > + csi2rx_out_grabber1: endpoint { > + remote-endpoint = <&grabber1_in_csi2rx>; > + }; > + }; > + > + port@3 { > + reg = <3>; > + > + csi2rx_out_grabber2: endpoint { > + remote-endpoint = <&grabber2_in_csi2rx>; > + }; > + }; > + > + port@4 { > + reg = <4>; > + > + csi2rx_out_grabber3: endpoint { > + remote-endpoint = <&grabber3_in_csi2rx>; > + }; > + }; > + }; > + }; > + > +... > diff --git a/MAINTAINERS b/MAINTAINERS > index b6c811326355..bbb8b5c0187b 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -4495,6 +4495,7 @@ M: Maxime Ripard <mripard@kernel.org> > L: linux-media@vger.kernel.org > S: Maintained > F: Documentation/devicetree/bindings/media/cdns,*.txt > +F: Documentation/devicetree/bindings/media/cdns,csi2rx.yaml > F: drivers/media/platform/cadence/cdns-csi2* > > CADENCE NAND DRIVER
diff --git a/Documentation/devicetree/bindings/media/cdns,csi2rx.txt b/Documentation/devicetree/bindings/media/cdns,csi2rx.txt deleted file mode 100644 index 6b02a0657ad9..000000000000 --- a/Documentation/devicetree/bindings/media/cdns,csi2rx.txt +++ /dev/null @@ -1,100 +0,0 @@ -Cadence MIPI-CSI2 RX controller -=============================== - -The Cadence MIPI-CSI2 RX controller is a CSI-2 bridge supporting up to 4 CSI -lanes in input, and 4 different pixel streams in output. - -Required properties: - - compatible: must be set to "cdns,csi2rx" and an SoC-specific compatible - - reg: base address and size of the memory mapped region - - clocks: phandles to the clocks driving the controller - - clock-names: must contain: - * sys_clk: main clock - * p_clk: register bank clock - * pixel_if[0-3]_clk: pixel stream output clock, one for each stream - implemented in hardware, between 0 and 3 - -Optional properties: - - phys: phandle to the external D-PHY, phy-names must be provided - - phy-names: must contain "dphy", if the implementation uses an - external D-PHY - -Required subnodes: - - ports: A ports node with one port child node per device input and output - port, in accordance with the video interface bindings defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. The - port nodes are numbered as follows: - - Port Description - ----------------------------- - 0 CSI-2 input - 1 Stream 0 output - 2 Stream 1 output - 3 Stream 2 output - 4 Stream 3 output - - The stream output port nodes are optional if they are not - connected to anything at the hardware level or implemented - in the design.Since there is only one endpoint per port, - the endpoints are not numbered. - - -Example: - -csi2rx: csi-bridge@0d060000 { - compatible = "cdns,csi2rx"; - reg = <0x0d060000 0x1000>; - clocks = <&byteclock>, <&byteclock> - <&coreclock>, <&coreclock>, - <&coreclock>, <&coreclock>; - clock-names = "sys_clk", "p_clk", - "pixel_if0_clk", "pixel_if1_clk", - "pixel_if2_clk", "pixel_if3_clk"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - csi2rx_in_sensor: endpoint { - remote-endpoint = <&sensor_out_csi2rx>; - clock-lanes = <0>; - data-lanes = <1 2>; - }; - }; - - port@1 { - reg = <1>; - - csi2rx_out_grabber0: endpoint { - remote-endpoint = <&grabber0_in_csi2rx>; - }; - }; - - port@2 { - reg = <2>; - - csi2rx_out_grabber1: endpoint { - remote-endpoint = <&grabber1_in_csi2rx>; - }; - }; - - port@3 { - reg = <3>; - - csi2rx_out_grabber2: endpoint { - remote-endpoint = <&grabber2_in_csi2rx>; - }; - }; - - port@4 { - reg = <4>; - - csi2rx_out_grabber3: endpoint { - remote-endpoint = <&grabber3_in_csi2rx>; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/media/cdns,csi2rx.yaml b/Documentation/devicetree/bindings/media/cdns,csi2rx.yaml new file mode 100644 index 000000000000..aba1191b3e77 --- /dev/null +++ b/Documentation/devicetree/bindings/media/cdns,csi2rx.yaml @@ -0,0 +1,177 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/cdns,csi2rx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cadence MIPI-CSI2 RX controller + +maintainers: + - Maxime Ripard <mripard@kernel.org> + +description: + The Cadence MIPI-CSI2 RX controller is a CSI-2 bridge supporting up to 4 CSI + lanes in input, and 4 different pixel streams in output. + +properties: + compatible: + items: + - enum: + - starfive,jh7110-csi2rx + - const: cdns,csi2rx + + reg: + maxItems: 1 + + clocks: + items: + - description: CSI2Rx system clock + - description: Gated Register bank clock for APB interface + - description: pixel Clock for Stream interface 0 + - description: pixel Clock for Stream interface 1 + - description: pixel Clock for Stream interface 2 + - description: pixel Clock for Stream interface 3 + + clock-names: + items: + - const: sys_clk + - const: p_clk + - const: pixel_if0_clk + - const: pixel_if1_clk + - const: pixel_if2_clk + - const: pixel_if3_clk + + phys: + maxItems: 1 + description: MIPI D-PHY + + phy-names: + items: + - const: dphy + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + Input port node, single endpoint describing the CSI-2 transmitter. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + bus-type: + const: 4 + + clock-lanes: + const: 0 + + data-lanes: + minItems: 1 + maxItems: 4 + items: + maximum: 4 + + required: + - data-lanes + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Stream 0 Output port node + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: + Stream 1 Output port node + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: + Stream 2 Output port node + + port@4: + $ref: /schemas/graph.yaml#/properties/port + description: + Stream 3 Output port node + + required: + - port@0 + +required: + - compatible + - reg + - clocks + - clock-names + - ports + +additionalProperties: false + +examples: + - | + csi@d060000 { + compatible = "starfive,jh7110-csi2rx", "cdns,csi2rx"; + reg = <0x0d060000 0x1000>; + clocks = <&byteclock 7>, <&byteclock 6>, + <&coreclock 8>, <&coreclock 9>, + <&coreclock 10>, <&coreclock 11>; + clock-names = "sys_clk", "p_clk", + "pixel_if0_clk", "pixel_if1_clk", + "pixel_if2_clk", "pixel_if3_clk"; + phys = <&csi_phy>; + phy-names = "dphy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + csi2rx_in_sensor: endpoint { + remote-endpoint = <&sensor_out_csi2rx>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + + port@1 { + reg = <1>; + + csi2rx_out_grabber0: endpoint { + remote-endpoint = <&grabber0_in_csi2rx>; + }; + }; + + port@2 { + reg = <2>; + + csi2rx_out_grabber1: endpoint { + remote-endpoint = <&grabber1_in_csi2rx>; + }; + }; + + port@3 { + reg = <3>; + + csi2rx_out_grabber2: endpoint { + remote-endpoint = <&grabber2_in_csi2rx>; + }; + }; + + port@4 { + reg = <4>; + + csi2rx_out_grabber3: endpoint { + remote-endpoint = <&grabber3_in_csi2rx>; + }; + }; + }; + }; + +... diff --git a/MAINTAINERS b/MAINTAINERS index b6c811326355..bbb8b5c0187b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4495,6 +4495,7 @@ M: Maxime Ripard <mripard@kernel.org> L: linux-media@vger.kernel.org S: Maintained F: Documentation/devicetree/bindings/media/cdns,*.txt +F: Documentation/devicetree/bindings/media/cdns,csi2rx.yaml F: drivers/media/platform/cadence/cdns-csi2* CADENCE NAND DRIVER
Convert DT bindings document for Cadence MIPI-CSI2 RX controller to DT schema format. For compatible, new compatibles should not be messed with conversion, but the original binding did not specify any SoC-specific compatible string, so add the StarFive compatible string. Signed-off-by: Jack Zhu <jack.zhu@starfivetech.com> --- .../devicetree/bindings/media/cdns,csi2rx.txt | 100 ---------- .../bindings/media/cdns,csi2rx.yaml | 177 ++++++++++++++++++ MAINTAINERS | 1 + 3 files changed, 178 insertions(+), 100 deletions(-) delete mode 100644 Documentation/devicetree/bindings/media/cdns,csi2rx.txt create mode 100644 Documentation/devicetree/bindings/media/cdns,csi2rx.yaml