diff mbox series

[v8,2/4] Bluetooth: hci_qca: Add support for QTI Bluetooth chip wcn6855

Message ID 20230326233812.28058-3-steev@kali.org
State Accepted
Commit 095327fede005f4b14d40b2183b2f7965c739dbd
Headers show
Series [v8,1/4] dt-bindings: net: Add WCN6855 Bluetooth | expand

Commit Message

Steev Klimaszewski March 26, 2023, 11:38 p.m. UTC
Add regulators, GPIOs and changes required to power on/off wcn6855.
Add support for firmware download for wcn6855 which is in the
linux-firmware repository as hpbtfw21.tlv and hpnv21.bin.

Based on the assumption that this is similar to the wcn6750

Tested-on: BTFW.HSP.2.1.0-00538-VER_PATCHZ-1

Signed-off-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Tested-by: Bjorn Andersson <andersson@kernel.org>
---
Changes since v7:
 * None

Changes since v6:
 * Update commit message.
 * Add Johan's R-b and T-b.

Changes since v5:
 * Revert Set qcadev->initspeed since 6855 doesn't use it, don't touch.
 * Convert get_fw_build_info to a switch statement
 * Add poweroff handling
 * Fix up line alignments
 * Drop from microsoft extensions check since I don't actually know if we need

Changes since v4:
 * Remove unused firmware check because we don't have mbn firmware.
 * Set qcadev->init_speed if it hasn't been set.

Changes since v3:
 * drop unused regulators

Changes since v2:
 * drop unnecessary commit info

Changes since v1:
 * None

 drivers/bluetooth/btqca.c   | 14 ++++++++-
 drivers/bluetooth/btqca.h   | 10 +++++++
 drivers/bluetooth/hci_qca.c | 57 ++++++++++++++++++++++++++++---------
 3 files changed, 66 insertions(+), 15 deletions(-)

Comments

Johan Hovold March 30, 2023, 10:10 a.m. UTC | #1
On Sun, Mar 26, 2023 at 06:38:10PM -0500, Steev Klimaszewski wrote:
> Add regulators, GPIOs and changes required to power on/off wcn6855.
> Add support for firmware download for wcn6855 which is in the
> linux-firmware repository as hpbtfw21.tlv and hpnv21.bin.
> 
> Based on the assumption that this is similar to the wcn6750
> 
> Tested-on: BTFW.HSP.2.1.0-00538-VER_PATCHZ-1
> 
> Signed-off-by: Steev Klimaszewski <steev@kali.org>
> Reviewed-by: Bjorn Andersson <andersson@kernel.org>
> Tested-by: Bjorn Andersson <andersson@kernel.org>
> ---
> Changes since v7:
>  * None

Only noticed now when Luiz applied the patches, but why did you drop my
reviewed-by and tested-by tags from this patch when submitting v8?

For the record:

Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
 
> Changes since v6:
>  * Update commit message.
>  * Add Johan's R-b and T-b.
> 
> Changes since v5:
>  * Revert Set qcadev->initspeed since 6855 doesn't use it, don't touch.
>  * Convert get_fw_build_info to a switch statement
>  * Add poweroff handling
>  * Fix up line alignments
>  * Drop from microsoft extensions check since I don't actually know if we need
> 
> Changes since v4:
>  * Remove unused firmware check because we don't have mbn firmware.
>  * Set qcadev->init_speed if it hasn't been set.
> 
> Changes since v3:
>  * drop unused regulators
> 
> Changes since v2:
>  * drop unnecessary commit info
> 
> Changes since v1:
>  * None

Johan
Steev Klimaszewski March 30, 2023, 4:35 p.m. UTC | #2
Hi Johan,

On Thu, Mar 30, 2023 at 5:10 AM Johan Hovold <johan@kernel.org> wrote:
>
> On Sun, Mar 26, 2023 at 06:38:10PM -0500, Steev Klimaszewski wrote:
> > Add regulators, GPIOs and changes required to power on/off wcn6855.
> > Add support for firmware download for wcn6855 which is in the
> > linux-firmware repository as hpbtfw21.tlv and hpnv21.bin.
> >
> > Based on the assumption that this is similar to the wcn6750
> >
> > Tested-on: BTFW.HSP.2.1.0-00538-VER_PATCHZ-1
> >
> > Signed-off-by: Steev Klimaszewski <steev@kali.org>
> > Reviewed-by: Bjorn Andersson <andersson@kernel.org>
> > Tested-by: Bjorn Andersson <andersson@kernel.org>
> > ---
> > Changes since v7:
> >  * None
>
> Only noticed now when Luiz applied the patches, but why did you drop my
> reviewed-by and tested-by tags from this patch when submitting v8?
>
> For the record:
>
> Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
> Tested-by: Johan Hovold <johan+linaro@kernel.org>
>
Oops, that wasn't intentional! I only meant to drop it on the dts bits
as that part I wanted to make sure I got right based on your comments,
my apologies!
--steev
Luiz Augusto von Dentz April 12, 2023, 8 p.m. UTC | #3
Hi Steev,

On Thu, Mar 30, 2023 at 9:35 AM Steev Klimaszewski <steev@kali.org> wrote:
>
> Hi Johan,
>
> On Thu, Mar 30, 2023 at 5:10 AM Johan Hovold <johan@kernel.org> wrote:
> >
> > On Sun, Mar 26, 2023 at 06:38:10PM -0500, Steev Klimaszewski wrote:
> > > Add regulators, GPIOs and changes required to power on/off wcn6855.
> > > Add support for firmware download for wcn6855 which is in the
> > > linux-firmware repository as hpbtfw21.tlv and hpnv21.bin.
> > >
> > > Based on the assumption that this is similar to the wcn6750
> > >
> > > Tested-on: BTFW.HSP.2.1.0-00538-VER_PATCHZ-1
> > >
> > > Signed-off-by: Steev Klimaszewski <steev@kali.org>
> > > Reviewed-by: Bjorn Andersson <andersson@kernel.org>
> > > Tested-by: Bjorn Andersson <andersson@kernel.org>
> > > ---
> > > Changes since v7:
> > >  * None
> >
> > Only noticed now when Luiz applied the patches, but why did you drop my
> > reviewed-by and tested-by tags from this patch when submitting v8?
> >
> > For the record:
> >
> > Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
> > Tested-by: Johan Hovold <johan+linaro@kernel.org>
> >
> Oops, that wasn't intentional! I only meant to drop it on the dts bits
> as that part I wanted to make sure I got right based on your comments,
> my apologies!
> --steev

This one seems to be causing a new warning:

drivers/bluetooth/hci_qca.c:18
94:37: warning: unused variable 'qca_soc_data_wcn6855' [-Wunused-const-variable]
Steev Klimaszewski April 12, 2023, 11:38 p.m. UTC | #4
Hi Luiz,

On Wed, Apr 12, 2023 at 3:00 PM Luiz Augusto von Dentz
<luiz.dentz@gmail.com> wrote:
>
> Hi Steev,
>
> On Thu, Mar 30, 2023 at 9:35 AM Steev Klimaszewski <steev@kali.org> wrote:
> >
> > Hi Johan,
> >
> > On Thu, Mar 30, 2023 at 5:10 AM Johan Hovold <johan@kernel.org> wrote:
> > >
> > > On Sun, Mar 26, 2023 at 06:38:10PM -0500, Steev Klimaszewski wrote:
> > > > Add regulators, GPIOs and changes required to power on/off wcn6855.
> > > > Add support for firmware download for wcn6855 which is in the
> > > > linux-firmware repository as hpbtfw21.tlv and hpnv21.bin.
> > > >
> > > > Based on the assumption that this is similar to the wcn6750
> > > >
> > > > Tested-on: BTFW.HSP.2.1.0-00538-VER_PATCHZ-1
> > > >
> > > > Signed-off-by: Steev Klimaszewski <steev@kali.org>
> > > > Reviewed-by: Bjorn Andersson <andersson@kernel.org>
> > > > Tested-by: Bjorn Andersson <andersson@kernel.org>
> > > > ---
> > > > Changes since v7:
> > > >  * None
> > >
> > > Only noticed now when Luiz applied the patches, but why did you drop my
> > > reviewed-by and tested-by tags from this patch when submitting v8?
> > >
> > > For the record:
> > >
> > > Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
> > > Tested-by: Johan Hovold <johan+linaro@kernel.org>
> > >
> > Oops, that wasn't intentional! I only meant to drop it on the dts bits
> > as that part I wanted to make sure I got right based on your comments,
> > my apologies!
> > --steev
>
> This one seems to be causing a new warning:
>
> drivers/bluetooth/hci_qca.c:18
> 94:37: warning: unused variable 'qca_soc_data_wcn6855' [-Wunused-const-variable]
>
I had seen this as well and I just noticed that the others were marked
as __maybe_unused and I forgot to.  Will send a fix up for that!


> --
> Luiz Augusto von Dentz
-- steev
diff mbox series

Patch

diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index c9064d34d830..fd0941fe8608 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -614,6 +614,9 @@  int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 		config.type = ELF_TYPE_PATCH;
 		snprintf(config.fwname, sizeof(config.fwname),
 			 "qca/msbtfw%02x.mbn", rom_ver);
+	} else if (soc_type == QCA_WCN6855) {
+		snprintf(config.fwname, sizeof(config.fwname),
+			 "qca/hpbtfw%02x.tlv", rom_ver);
 	} else {
 		snprintf(config.fwname, sizeof(config.fwname),
 			 "qca/rampatch_%08x.bin", soc_ver);
@@ -648,6 +651,9 @@  int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 	else if (soc_type == QCA_WCN6750)
 		snprintf(config.fwname, sizeof(config.fwname),
 			 "qca/msnv%02x.bin", rom_ver);
+	else if (soc_type == QCA_WCN6855)
+		snprintf(config.fwname, sizeof(config.fwname),
+			 "qca/hpnv%02x.bin", rom_ver);
 	else
 		snprintf(config.fwname, sizeof(config.fwname),
 			 "qca/nvm_%08x.bin", soc_ver);
@@ -685,11 +691,17 @@  int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 		return err;
 	}
 
-	if (soc_type == QCA_WCN3991 || soc_type == QCA_WCN6750) {
+	switch (soc_type) {
+	case QCA_WCN3991:
+	case QCA_WCN6750:
+	case QCA_WCN6855:
 		/* get fw build info */
 		err = qca_read_fw_build_info(hdev);
 		if (err < 0)
 			return err;
+		break;
+	default:
+		break;
 	}
 
 	bt_dev_info(hdev, "QCA setup on UART is completed");
diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
index 61e9a50e66ae..b884095bcd9d 100644
--- a/drivers/bluetooth/btqca.h
+++ b/drivers/bluetooth/btqca.h
@@ -147,6 +147,7 @@  enum qca_btsoc_type {
 	QCA_WCN3991,
 	QCA_QCA6390,
 	QCA_WCN6750,
+	QCA_WCN6855,
 };
 
 #if IS_ENABLED(CONFIG_BT_QCA)
@@ -168,6 +169,10 @@  static inline bool qca_is_wcn6750(enum qca_btsoc_type soc_type)
 {
 	return soc_type == QCA_WCN6750;
 }
+static inline bool qca_is_wcn6855(enum qca_btsoc_type soc_type)
+{
+	return soc_type == QCA_WCN6855;
+}
 
 #else
 
@@ -206,6 +211,11 @@  static inline bool qca_is_wcn6750(enum qca_btsoc_type soc_type)
 	return false;
 }
 
+static inline bool qca_is_wcn6855(enum qca_btsoc_type soc_type)
+{
+	return false;
+}
+
 static inline int qca_send_pre_shutdown_cmd(struct hci_dev *hdev)
 {
 	return -EOPNOTSUPP;
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 3df8c3606e93..38ff962662ff 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1317,7 +1317,8 @@  static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate)
 
 	/* Give the controller time to process the request */
 	if (qca_is_wcn399x(qca_soc_type(hu)) ||
-	    qca_is_wcn6750(qca_soc_type(hu)))
+	    qca_is_wcn6750(qca_soc_type(hu)) ||
+	    qca_is_wcn6855(qca_soc_type(hu)))
 		usleep_range(1000, 10000);
 	else
 		msleep(300);
@@ -1394,7 +1395,8 @@  static unsigned int qca_get_speed(struct hci_uart *hu,
 static int qca_check_speeds(struct hci_uart *hu)
 {
 	if (qca_is_wcn399x(qca_soc_type(hu)) ||
-	    qca_is_wcn6750(qca_soc_type(hu))) {
+	    qca_is_wcn6750(qca_soc_type(hu)) ||
+	    qca_is_wcn6855(qca_soc_type(hu))) {
 		if (!qca_get_speed(hu, QCA_INIT_SPEED) &&
 		    !qca_get_speed(hu, QCA_OPER_SPEED))
 			return -EINVAL;
@@ -1428,7 +1430,8 @@  static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
 		 * changing the baudrate of chip and host.
 		 */
 		if (qca_is_wcn399x(soc_type) ||
-		    qca_is_wcn6750(soc_type))
+		    qca_is_wcn6750(soc_type) ||
+		    qca_is_wcn6855(soc_type))
 			hci_uart_set_flow_control(hu, true);
 
 		if (soc_type == QCA_WCN3990) {
@@ -1446,7 +1449,8 @@  static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
 
 error:
 		if (qca_is_wcn399x(soc_type) ||
-		    qca_is_wcn6750(soc_type))
+		    qca_is_wcn6750(soc_type) ||
+		    qca_is_wcn6855(soc_type))
 			hci_uart_set_flow_control(hu, false);
 
 		if (soc_type == QCA_WCN3990) {
@@ -1682,7 +1686,8 @@  static int qca_power_on(struct hci_dev *hdev)
 		return 0;
 
 	if (qca_is_wcn399x(soc_type) ||
-	    qca_is_wcn6750(soc_type)) {
+	    qca_is_wcn6750(soc_type) ||
+	    qca_is_wcn6855(soc_type)) {
 		ret = qca_regulator_init(hu);
 	} else {
 		qcadev = serdev_device_get_drvdata(hu->serdev);
@@ -1723,7 +1728,8 @@  static int qca_setup(struct hci_uart *hu)
 
 	bt_dev_info(hdev, "setting up %s",
 		qca_is_wcn399x(soc_type) ? "wcn399x" :
-		(soc_type == QCA_WCN6750) ? "wcn6750" : "ROME/QCA6390");
+		(soc_type == QCA_WCN6750) ? "wcn6750" :
+		(soc_type == QCA_WCN6855) ? "wcn6855" : "ROME/QCA6390");
 
 	qca->memdump_state = QCA_MEMDUMP_IDLE;
 
@@ -1735,7 +1741,8 @@  static int qca_setup(struct hci_uart *hu)
 	clear_bit(QCA_SSR_TRIGGERED, &qca->flags);
 
 	if (qca_is_wcn399x(soc_type) ||
-	    qca_is_wcn6750(soc_type)) {
+	    qca_is_wcn6750(soc_type) ||
+	    qca_is_wcn6855(soc_type)) {
 		set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
 		hci_set_aosp_capable(hdev);
 
@@ -1757,7 +1764,8 @@  static int qca_setup(struct hci_uart *hu)
 	}
 
 	if (!(qca_is_wcn399x(soc_type) ||
-	     qca_is_wcn6750(soc_type))) {
+	      qca_is_wcn6750(soc_type) ||
+	      qca_is_wcn6855(soc_type))) {
 		/* Get QCA version information */
 		ret = qca_read_soc_version(hdev, &ver, soc_type);
 		if (ret)
@@ -1883,6 +1891,20 @@  static const struct qca_device_data qca_soc_data_wcn6750 = {
 	.capabilities = QCA_CAP_WIDEBAND_SPEECH | QCA_CAP_VALID_LE_STATES,
 };
 
+static const struct qca_device_data qca_soc_data_wcn6855 = {
+	.soc_type = QCA_WCN6855,
+	.vregs = (struct qca_vreg []) {
+		{ "vddio", 5000 },
+		{ "vddbtcxmx", 126000 },
+		{ "vddrfacmn", 12500 },
+		{ "vddrfa0p8", 102000 },
+		{ "vddrfa1p7", 302000 },
+		{ "vddrfa1p2", 257000 },
+	},
+	.num_vregs = 6,
+	.capabilities = QCA_CAP_WIDEBAND_SPEECH | QCA_CAP_VALID_LE_STATES,
+};
+
 static void qca_power_shutdown(struct hci_uart *hu)
 {
 	struct qca_serdev *qcadev;
@@ -1912,7 +1934,7 @@  static void qca_power_shutdown(struct hci_uart *hu)
 		host_set_baudrate(hu, 2400);
 		qca_send_power_pulse(hu, false);
 		qca_regulator_disable(qcadev);
-	} else if (soc_type == QCA_WCN6750) {
+	} else if (soc_type == QCA_WCN6750 || soc_type == QCA_WCN6855) {
 		gpiod_set_value_cansleep(qcadev->bt_en, 0);
 		msleep(100);
 		qca_regulator_disable(qcadev);
@@ -2047,7 +2069,8 @@  static int qca_serdev_probe(struct serdev_device *serdev)
 
 	if (data &&
 	    (qca_is_wcn399x(data->soc_type) ||
-	    qca_is_wcn6750(data->soc_type))) {
+	     qca_is_wcn6750(data->soc_type) ||
+	     qca_is_wcn6855(data->soc_type))) {
 		qcadev->btsoc_type = data->soc_type;
 		qcadev->bt_power = devm_kzalloc(&serdev->dev,
 						sizeof(struct qca_power),
@@ -2067,14 +2090,18 @@  static int qca_serdev_probe(struct serdev_device *serdev)
 
 		qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
 					       GPIOD_OUT_LOW);
-		if (IS_ERR_OR_NULL(qcadev->bt_en) && data->soc_type == QCA_WCN6750) {
+		if (IS_ERR_OR_NULL(qcadev->bt_en) &&
+		    (data->soc_type == QCA_WCN6750 ||
+		     data->soc_type == QCA_WCN6855)) {
 			dev_err(&serdev->dev, "failed to acquire BT_EN gpio\n");
 			power_ctrl_enabled = false;
 		}
 
 		qcadev->sw_ctrl = devm_gpiod_get_optional(&serdev->dev, "swctrl",
 					       GPIOD_IN);
-		if (IS_ERR_OR_NULL(qcadev->sw_ctrl) && data->soc_type == QCA_WCN6750)
+		if (IS_ERR_OR_NULL(qcadev->sw_ctrl) &&
+		    (data->soc_type == QCA_WCN6750 ||
+		     data->soc_type == QCA_WCN6855))
 			dev_warn(&serdev->dev, "failed to acquire SW_CTRL gpio\n");
 
 		qcadev->susclk = devm_clk_get_optional(&serdev->dev, NULL);
@@ -2150,8 +2177,9 @@  static void qca_serdev_remove(struct serdev_device *serdev)
 	struct qca_power *power = qcadev->bt_power;
 
 	if ((qca_is_wcn399x(qcadev->btsoc_type) ||
-	     qca_is_wcn6750(qcadev->btsoc_type)) &&
-	     power->vregs_on)
+	     qca_is_wcn6750(qcadev->btsoc_type) ||
+	     qca_is_wcn6855(qcadev->btsoc_type)) &&
+	    power->vregs_on)
 		qca_power_shutdown(&qcadev->serdev_hu);
 	else if (qcadev->susclk)
 		clk_disable_unprepare(qcadev->susclk);
@@ -2335,6 +2363,7 @@  static const struct of_device_id qca_bluetooth_of_match[] = {
 	{ .compatible = "qcom,wcn3991-bt", .data = &qca_soc_data_wcn3991},
 	{ .compatible = "qcom,wcn3998-bt", .data = &qca_soc_data_wcn3998},
 	{ .compatible = "qcom,wcn6750-bt", .data = &qca_soc_data_wcn6750},
+	{ .compatible = "qcom,wcn6855-bt", .data = &qca_soc_data_wcn6855},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, qca_bluetooth_of_match);