| Message ID | 20230321-topic-sagami_dp-v1-4-340c8bce4276@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | Enable DisplayPort over USB-C on SONY Sagami | expand |
Le 21/03/2023 à 23:12, Konrad Dybcio a écrit : > As we're heading towards getting the status property last everywhere, > take care of it for SM8350 SONY Sagami. > > Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> > --- > .../boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi | 30 ++++++++++------------ > 1 file changed, 14 insertions(+), 16 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi > index b2baa81baf5e..95b1ba4ce470 100644 > --- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi > @@ -189,8 +189,8 @@ vph_pwr: vph-pwr-regulator { > }; > > &adsp { > - status = "okay"; > firmware-name = "qcom/sm8350/Sony/sagami/adsp.mbn"; > + status = "okay"; > }; > > &apps_rsc { > @@ -542,27 +542,27 @@ pmr735a_l7: ldo7 { > }; > > &cdsp { > - status = "okay"; > firmware-name = "qcom/sm8350/Sony/sagami/cdsp.mbn"; > + status = "okay"; > }; > > &i2c1 { > - status = "okay"; > clock-frequency = <1000000>; > + status = "okay"; > > /* Some subset of SONY IMX663 camera sensor @ 38 */ > }; > > &i2c4 { > - status = "okay"; > clock-frequency = <400000>; > + status = "okay"; > > /* Samsung Touchscreen (needs I2C GPI DMA) @ 48 */ > }; > > &i2c11 { > - status = "okay"; > clock-frequency = <1000000>; > + status = "okay"; > > cs35l41_l: speaker-amp@40 { > compatible = "cirrus,cs35l41"; > @@ -596,31 +596,31 @@ cs35l41_r: speaker-amp@41 { > }; > > &i2c12 { > - status = "okay"; > /* Clock frequency was not specified downstream, let's park it to 100 KHz */ > clock-frequency = <100000>; > + status = "okay"; > > /* AMS TCS3490 RGB+IR color sensor @ 72 */ > }; > > &i2c13 { > - status = "okay"; > /* Clock frequency was not specified downstream, let's park it to 100 KHz */ > clock-frequency = <100000>; > + status = "okay"; > > /* Qualcomm PM8008i/PM8008j (?) @ 8, 9, c, d */ > }; > > &i2c15 { > - status = "okay"; > clock-frequency = <400000>; > + status = "okay"; > > /* NXP SN1X0 NFC @ 28 */ > }; > > &i2c17 { > - status = "okay"; > clock-frequency = <1000000>; > + status = "okay"; > > /* Cirrus Logic CS40L25A boosted haptics driver @ 40 */ > }; > @@ -652,8 +652,8 @@ mdss_dp_altmode: endpoint { > }; > > &mpss { > - status = "okay"; > firmware-name = "qcom/sm8350/Sony/sagami/modem.mbn"; > + status = "okay"; > }; > > &pm8350_gpios { > @@ -719,8 +719,8 @@ &pon_pwrkey { > }; > > &pon_resin { > - status = "okay"; > linux,code = <KEY_VOLUMEUP>; > + status = "okay"; > }; > > &qupv3_id_0 { > @@ -748,8 +748,8 @@ &sdhc_2 { > }; > > &slpi { > - status = "okay"; > firmware-name = "qcom/sm8350/Sony/sagami/slpi.mbn"; > + status = "okay"; > }; > > &spi14 { > @@ -1038,16 +1038,14 @@ usb_1_dwc3_ss: endpoint { > }; > > &usb_1_hsphy { > - status = "okay"; > - > vdda-pll-supply = <&pm8350_l5>; > vdda18-supply = <&pm8350c_l1>; > vdda33-supply = <&pm8350_l2>; > + status = "okay"; > }; > > &usb_1_qmpphy { > - status = "okay"; > - > vdda-phy-supply = <&pm8350_l6>; > vdda-pll-supply = <&pm8350_l1>; > + status = "okay"; > }; > Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
On 2.04.2023 17:19, Marijn Suijten wrote: > On 2023-03-21 23:12:31, Konrad Dybcio wrote: > > When you get to resending this, change sm8350-nagara in the title to > sm8350-sagami :) Even I confuse them, they just look too alike! ;) Konrad > > - Marijn > >> As we're heading towards getting the status property last everywhere, >> take care of it for SM8350 SONY Sagami. >> >> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> >> --- >> .../boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi | 30 ++++++++++------------ >> 1 file changed, 14 insertions(+), 16 deletions(-) >> >> diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi >> index b2baa81baf5e..95b1ba4ce470 100644 >> --- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi >> +++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi >> @@ -189,8 +189,8 @@ vph_pwr: vph-pwr-regulator { >> }; >> >> &adsp { >> - status = "okay"; >> firmware-name = "qcom/sm8350/Sony/sagami/adsp.mbn"; >> + status = "okay"; >> }; >> >> &apps_rsc { >> @@ -542,27 +542,27 @@ pmr735a_l7: ldo7 { >> }; >> >> &cdsp { >> - status = "okay"; >> firmware-name = "qcom/sm8350/Sony/sagami/cdsp.mbn"; >> + status = "okay"; >> }; >> >> &i2c1 { >> - status = "okay"; >> clock-frequency = <1000000>; >> + status = "okay"; >> >> /* Some subset of SONY IMX663 camera sensor @ 38 */ >> }; >> >> &i2c4 { >> - status = "okay"; >> clock-frequency = <400000>; >> + status = "okay"; >> >> /* Samsung Touchscreen (needs I2C GPI DMA) @ 48 */ >> }; >> >> &i2c11 { >> - status = "okay"; >> clock-frequency = <1000000>; >> + status = "okay"; >> >> cs35l41_l: speaker-amp@40 { >> compatible = "cirrus,cs35l41"; >> @@ -596,31 +596,31 @@ cs35l41_r: speaker-amp@41 { >> }; >> >> &i2c12 { >> - status = "okay"; >> /* Clock frequency was not specified downstream, let's park it to 100 KHz */ >> clock-frequency = <100000>; >> + status = "okay"; >> >> /* AMS TCS3490 RGB+IR color sensor @ 72 */ >> }; >> >> &i2c13 { >> - status = "okay"; >> /* Clock frequency was not specified downstream, let's park it to 100 KHz */ >> clock-frequency = <100000>; >> + status = "okay"; >> >> /* Qualcomm PM8008i/PM8008j (?) @ 8, 9, c, d */ >> }; >> >> &i2c15 { >> - status = "okay"; >> clock-frequency = <400000>; >> + status = "okay"; >> >> /* NXP SN1X0 NFC @ 28 */ >> }; >> >> &i2c17 { >> - status = "okay"; >> clock-frequency = <1000000>; >> + status = "okay"; >> >> /* Cirrus Logic CS40L25A boosted haptics driver @ 40 */ >> }; >> @@ -652,8 +652,8 @@ mdss_dp_altmode: endpoint { >> }; >> >> &mpss { >> - status = "okay"; >> firmware-name = "qcom/sm8350/Sony/sagami/modem.mbn"; >> + status = "okay"; >> }; >> >> &pm8350_gpios { >> @@ -719,8 +719,8 @@ &pon_pwrkey { >> }; >> >> &pon_resin { >> - status = "okay"; >> linux,code = <KEY_VOLUMEUP>; >> + status = "okay"; >> }; >> >> &qupv3_id_0 { >> @@ -748,8 +748,8 @@ &sdhc_2 { >> }; >> >> &slpi { >> - status = "okay"; >> firmware-name = "qcom/sm8350/Sony/sagami/slpi.mbn"; >> + status = "okay"; >> }; >> >> &spi14 { >> @@ -1038,16 +1038,14 @@ usb_1_dwc3_ss: endpoint { >> }; >> >> &usb_1_hsphy { >> - status = "okay"; >> - >> vdda-pll-supply = <&pm8350_l5>; >> vdda18-supply = <&pm8350c_l1>; >> vdda33-supply = <&pm8350_l2>; >> + status = "okay"; >> }; >> >> &usb_1_qmpphy { >> - status = "okay"; >> - >> vdda-phy-supply = <&pm8350_l6>; >> vdda-pll-supply = <&pm8350_l1>; >> + status = "okay"; >> }; >> >> -- >> 2.40.0 >>
diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi index b2baa81baf5e..95b1ba4ce470 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi @@ -189,8 +189,8 @@ vph_pwr: vph-pwr-regulator { }; &adsp { - status = "okay"; firmware-name = "qcom/sm8350/Sony/sagami/adsp.mbn"; + status = "okay"; }; &apps_rsc { @@ -542,27 +542,27 @@ pmr735a_l7: ldo7 { }; &cdsp { - status = "okay"; firmware-name = "qcom/sm8350/Sony/sagami/cdsp.mbn"; + status = "okay"; }; &i2c1 { - status = "okay"; clock-frequency = <1000000>; + status = "okay"; /* Some subset of SONY IMX663 camera sensor @ 38 */ }; &i2c4 { - status = "okay"; clock-frequency = <400000>; + status = "okay"; /* Samsung Touchscreen (needs I2C GPI DMA) @ 48 */ }; &i2c11 { - status = "okay"; clock-frequency = <1000000>; + status = "okay"; cs35l41_l: speaker-amp@40 { compatible = "cirrus,cs35l41"; @@ -596,31 +596,31 @@ cs35l41_r: speaker-amp@41 { }; &i2c12 { - status = "okay"; /* Clock frequency was not specified downstream, let's park it to 100 KHz */ clock-frequency = <100000>; + status = "okay"; /* AMS TCS3490 RGB+IR color sensor @ 72 */ }; &i2c13 { - status = "okay"; /* Clock frequency was not specified downstream, let's park it to 100 KHz */ clock-frequency = <100000>; + status = "okay"; /* Qualcomm PM8008i/PM8008j (?) @ 8, 9, c, d */ }; &i2c15 { - status = "okay"; clock-frequency = <400000>; + status = "okay"; /* NXP SN1X0 NFC @ 28 */ }; &i2c17 { - status = "okay"; clock-frequency = <1000000>; + status = "okay"; /* Cirrus Logic CS40L25A boosted haptics driver @ 40 */ }; @@ -652,8 +652,8 @@ mdss_dp_altmode: endpoint { }; &mpss { - status = "okay"; firmware-name = "qcom/sm8350/Sony/sagami/modem.mbn"; + status = "okay"; }; &pm8350_gpios { @@ -719,8 +719,8 @@ &pon_pwrkey { }; &pon_resin { - status = "okay"; linux,code = <KEY_VOLUMEUP>; + status = "okay"; }; &qupv3_id_0 { @@ -748,8 +748,8 @@ &sdhc_2 { }; &slpi { - status = "okay"; firmware-name = "qcom/sm8350/Sony/sagami/slpi.mbn"; + status = "okay"; }; &spi14 { @@ -1038,16 +1038,14 @@ usb_1_dwc3_ss: endpoint { }; &usb_1_hsphy { - status = "okay"; - vdda-pll-supply = <&pm8350_l5>; vdda18-supply = <&pm8350c_l1>; vdda33-supply = <&pm8350_l2>; + status = "okay"; }; &usb_1_qmpphy { - status = "okay"; - vdda-phy-supply = <&pm8350_l6>; vdda-pll-supply = <&pm8350_l1>; + status = "okay"; };
As we're heading towards getting the status property last everywhere, take care of it for SM8350 SONY Sagami. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> --- .../boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi | 30 ++++++++++------------ 1 file changed, 14 insertions(+), 16 deletions(-)