| Message ID | 20230331141032.3817866-1-niklas.soderlund+renesas@ragnatech.se |
|---|---|
| State | Superseded |
| Headers | show |
| Series | dt-bindings: i2c: maxim,max96712: Require setting bus-type property | expand |
Hi Niklas, On Fri, Mar 31, 2023 at 5:39 PM Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> wrote: > On 2023-03-31 17:14:42 +0200, Geert Uytterhoeven wrote: > > On Fri, Mar 31, 2023 at 4:15 PM Niklas Söderlund > > <niklas.soderlund+renesas@ragnatech.se> wrote: > > > The MAX96712 can support both CSI-2 C-PHY and D-PHY bus. Document the > > > supported bus-types and make the property mandatory. > > > > > > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> > > > > Thanks for your patch! > > > > > --- a/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml > > > +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml > > > @@ -65,9 +65,14 @@ properties: > > > > > > properties: > > > data-lanes: true > > > + bus-type: > > > + enum: > > > + - 1 # CSI-2 C-PHY > > > + - 4 # CSI-2 D-PHY > > > > Perhaps use/refer to the symbolic names, too? > > I tired that, but dt_binding_check complained. > > $ cat Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml > ... > bus-type: > enum: > - MEDIA_BUS_TYPE_CSI2_CPHY > - MEDIA_BUS_TYPE_CSI2_DPHY > ... > > $ make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml > ... > .../obj/Documentation/devicetree/bindings/media/i2c/maxim,max96712.example.dtb: > gmsl-deserializer@49: ports:port@4:endpoint:bus-type:0: [4] is not one of ['MEDIA_BUS_TYPE_CSI2_CPHY', 'MEDIA_BUS_TYPE_CSI2_DPHY'] > > Or did I misunderstand you? I checked other bindings and the numerical > values where used in all media/i2c bindings. Yeah, I don't think you can do it that way. But this should work: - 1 # MEDIA_BUS_TYPE_CSI2_CPHY - 4 # MEDIA_BUS_TYPE_CSI2_DPHY Gr{oetje,eeting}s, Geert
On 31/03/2023 16:10, Niklas Söderlund wrote: > The MAX96712 can support both CSI-2 C-PHY and D-PHY bus. Document the > supported bus-types and make the property mandatory. Why making it mandatory? Commit msg should focus on "why" because "what" is easy to see. > > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> > --- > Hi, > > This is done in conjunction with adding C-PHY support to the driver, > patches on list. The current driver only supports D-PHY so this was > assumed in the driver. > > There is a single user of this binding, r8a779a0-falcon-csi-dsi.dtsi. A > separate patch to update that binding with a bus-type property is be > submitted. > > Without the property present the driver fall-back to D-PHY (even with > the C-PHY work applied). So this change is backward compatible with old > versions of the only effected DTS file. > --- Please use scripts/get_maintainers.pl to get a list of necessary people and lists to CC. It might happen, that command when run on an older kernel, gives you outdated entries. Therefore please be sure you base your patches on recent Linux kernel. > .../devicetree/bindings/media/i2c/maxim,max96712.yaml | 7 +++++++ > 1 file changed, 7 insertions(+) Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml index 444f24838d3d..fccbf287ff79 100644 --- a/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml @@ -65,9 +65,14 @@ properties: properties: data-lanes: true + bus-type: + enum: + - 1 # CSI-2 C-PHY + - 4 # CSI-2 D-PHY required: - data-lanes + - bus-type required: - port@4 @@ -82,6 +87,7 @@ additionalProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/media/video-interfaces.h> i2c@e6508000 { #address-cells = <1>; @@ -101,6 +107,7 @@ examples: port@4 { reg = <4>; max96712_out0: endpoint { + bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>; clock-lanes = <0>; data-lanes = <1 2 3 4>; remote-endpoint = <&csi40_in>;
The MAX96712 can support both CSI-2 C-PHY and D-PHY bus. Document the supported bus-types and make the property mandatory. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> --- Hi, This is done in conjunction with adding C-PHY support to the driver, patches on list. The current driver only supports D-PHY so this was assumed in the driver. There is a single user of this binding, r8a779a0-falcon-csi-dsi.dtsi. A separate patch to update that binding with a bus-type property is be submitted. Without the property present the driver fall-back to D-PHY (even with the C-PHY work applied). So this change is backward compatible with old versions of the only effected DTS file. --- .../devicetree/bindings/media/i2c/maxim,max96712.yaml | 7 +++++++ 1 file changed, 7 insertions(+)