diff mbox series

ARM: dts: omap: align UART node name with bindings

Message ID 20230123151531.369419-1-krzysztof.kozlowski@linaro.org
State New
Headers show
Series ARM: dts: omap: align UART node name with bindings | expand

Commit Message

Krzysztof Kozlowski Jan. 23, 2023, 3:15 p.m. UTC 
Bindings expect UART/serial node names to be "serial".

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm/boot/dts/omap-zoom-common.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

Comments

Krzysztof Kozlowski March 12, 2023, 5:21 p.m. UTC | #1 
On Mon, 23 Jan 2023 16:15:31 +0100, Krzysztof Kozlowski wrote:
> Bindings expect UART/serial node names to be "serial".
> 
> 

Applied, thanks!
(Patch was waiting for quite a long on the lists, let me know if anyone wants
to pick it up instead)

[1/1] ARM: dts: omap: align UART node name with bindings
      https://git.kernel.org/krzk/linux-dt/c/f7ec6efef4560edeebdca10b73a92f37c6fb16cf

Best regards,
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/omap-zoom-common.dtsi b/arch/arm/boot/dts/omap-zoom-common.dtsi
index 1e96c865d41d..8adc0ef01f6c 100644
--- a/arch/arm/boot/dts/omap-zoom-common.dtsi
+++ b/arch/arm/boot/dts/omap-zoom-common.dtsi
@@ -14,7 +14,7 @@  &gpmc {
 	 * they probably share the same GPIO IRQ
 	 * REVISIT: Add timing support from slls644g.pdf
 	 */
-	uart@3,0 {
+	serial@3,0 {
 		compatible = "ns16550a";
 		reg = <3 0 8>;	/* CS3, offset 0, IO size 8 */
 		bank-width = <2>;
@@ -50,7 +50,7 @@  uart@3,0 {
 		gpmc,wr-data-mux-bus-ns = <45>;
 		gpmc,wr-access-ns = <145>;
 	};
-	uart@3,1 {
+	serial@3,1 {
 		compatible = "ns16550a";
 		reg = <3 0x100 8>;	/* CS3, offset 0x100, IO size 8 */
 		bank-width = <2>;
@@ -61,7 +61,7 @@  uart@3,1 {
 		clock-frequency = <1843200>;
 		current-speed = <115200>;
 	};
-	uart@3,2 {
+	serial@3,2 {
 		compatible = "ns16550a";
 		reg = <3 0x200 8>;	/* CS3, offset 0x200, IO size 8 */
 		bank-width = <2>;
@@ -72,7 +72,7 @@  uart@3,2 {
 		clock-frequency = <1843200>;
 		current-speed = <115200>;
 	};
-	uart@3,3 {
+	serial@3,3 {
 		compatible = "ns16550a";
 		reg = <3 0x300 8>;	/* CS3, offset 0x300, IO size 8 */
 		bank-width = <2>;