Message ID | 20230214120253.1098426-6-abel.vesa@linaro.org |
---|---|
State | New |
Headers | show |
Series | Add dedicated Qcom ICE driver | expand |
On 14/02/23 14:02, Abel Vesa wrote: > Now that there is a new dedicated ICE driver, drop the sdhci-msm ICE > implementation and use the new ICE api provided by the Qualcomm soc > driver qcom-ice. > > Signed-off-by: Abel Vesa <abel.vesa@linaro.org> > --- > drivers/mmc/host/sdhci-msm.c | 252 ++++------------------------------- > 1 file changed, 25 insertions(+), 227 deletions(-) > > diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c > index 8ac81d57a3df..ac174d60641a 100644 > --- a/drivers/mmc/host/sdhci-msm.c > +++ b/drivers/mmc/host/sdhci-msm.c > @@ -19,6 +19,8 @@ > #include <linux/pinctrl/consumer.h> > #include <linux/reset.h> > > +#include <soc/qcom/ice.h> > + > #include "sdhci-cqhci.h" > #include "sdhci-pltfm.h" > #include "cqhci.h" > @@ -258,12 +260,12 @@ struct sdhci_msm_variant_info { > struct sdhci_msm_host { > struct platform_device *pdev; > void __iomem *core_mem; /* MSM SDCC mapped address */ > - void __iomem *ice_mem; /* MSM ICE mapped address (if available) */ > int pwr_irq; /* power irq */ > struct clk *bus_clk; /* SDHC bus voter clock */ > struct clk *xo_clk; /* TCXO clk needed for FLL feature of cm_dll*/ > - /* core, iface, cal, sleep, and ice clocks */ > - struct clk_bulk_data bulk_clks[5]; > + /* core, iface, cal and sleep clocks */ > + struct clk_bulk_data bulk_clks[4]; > + struct qcom_ice *ice; > unsigned long clk_rate; > struct mmc_host *mmc; > bool use_14lpp_dll_reset; > @@ -1802,233 +1804,28 @@ static void sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock) > * * > \*****************************************************************************/ > > -#ifdef CONFIG_MMC_CRYPTO > - > -#define AES_256_XTS_KEY_SIZE 64 > - > -/* QCOM ICE registers */ > - > -#define QCOM_ICE_REG_VERSION 0x0008 > - > -#define QCOM_ICE_REG_FUSE_SETTING 0x0010 > -#define QCOM_ICE_FUSE_SETTING_MASK 0x1 > -#define QCOM_ICE_FORCE_HW_KEY0_SETTING_MASK 0x2 > -#define QCOM_ICE_FORCE_HW_KEY1_SETTING_MASK 0x4 > - > -#define QCOM_ICE_REG_BIST_STATUS 0x0070 > -#define QCOM_ICE_BIST_STATUS_MASK 0xF0000000 > - > -#define QCOM_ICE_REG_ADVANCED_CONTROL 0x1000 > - > -#define sdhci_msm_ice_writel(host, val, reg) \ > - writel((val), (host)->ice_mem + (reg)) > -#define sdhci_msm_ice_readl(host, reg) \ > - readl((host)->ice_mem + (reg)) > - > -static bool sdhci_msm_ice_supported(struct sdhci_msm_host *msm_host) > -{ > - struct device *dev = mmc_dev(msm_host->mmc); > - u32 regval = sdhci_msm_ice_readl(msm_host, QCOM_ICE_REG_VERSION); > - int major = regval >> 24; > - int minor = (regval >> 16) & 0xFF; > - int step = regval & 0xFFFF; > - > - /* For now this driver only supports ICE version 3. */ > - if (major != 3) { > - dev_warn(dev, "Unsupported ICE version: v%d.%d.%d\n", > - major, minor, step); > - return false; > - } > - > - dev_info(dev, "Found QC Inline Crypto Engine (ICE) v%d.%d.%d\n", > - major, minor, step); > - > - /* If fuses are blown, ICE might not work in the standard way. */ > - regval = sdhci_msm_ice_readl(msm_host, QCOM_ICE_REG_FUSE_SETTING); > - if (regval & (QCOM_ICE_FUSE_SETTING_MASK | > - QCOM_ICE_FORCE_HW_KEY0_SETTING_MASK | > - QCOM_ICE_FORCE_HW_KEY1_SETTING_MASK)) { > - dev_warn(dev, "Fuses are blown; ICE is unusable!\n"); > - return false; > - } > - return true; > -} > - > -static inline struct clk *sdhci_msm_ice_get_clk(struct device *dev) > -{ > - return devm_clk_get(dev, "ice"); > -} > - > -static int sdhci_msm_ice_init(struct sdhci_msm_host *msm_host, > - struct cqhci_host *cq_host) > -{ > - struct mmc_host *mmc = msm_host->mmc; > - struct device *dev = mmc_dev(mmc); > - struct resource *res; > - > - if (!(cqhci_readl(cq_host, CQHCI_CAP) & CQHCI_CAP_CS)) > - return 0; > - > - res = platform_get_resource_byname(msm_host->pdev, IORESOURCE_MEM, > - "ice"); > - if (!res) { > - dev_warn(dev, "ICE registers not found\n"); > - goto disable; > - } > - > - if (!qcom_scm_ice_available()) { > - dev_warn(dev, "ICE SCM interface not found\n"); > - goto disable; > - } > - > - msm_host->ice_mem = devm_ioremap_resource(dev, res); > - if (IS_ERR(msm_host->ice_mem)) > - return PTR_ERR(msm_host->ice_mem); > - > - if (!sdhci_msm_ice_supported(msm_host)) > - goto disable; > - > - mmc->caps2 |= MMC_CAP2_CRYPTO; > - return 0; > - > -disable: > - dev_warn(dev, "Disabling inline encryption support\n"); > - return 0; > -} > - > -static void sdhci_msm_ice_low_power_mode_enable(struct sdhci_msm_host *msm_host) > -{ > - u32 regval; > - > - regval = sdhci_msm_ice_readl(msm_host, QCOM_ICE_REG_ADVANCED_CONTROL); > - /* > - * Enable low power mode sequence > - * [0]-0, [1]-0, [2]-0, [3]-E, [4]-0, [5]-0, [6]-0, [7]-0 > - */ > - regval |= 0x7000; > - sdhci_msm_ice_writel(msm_host, regval, QCOM_ICE_REG_ADVANCED_CONTROL); > -} > - > -static void sdhci_msm_ice_optimization_enable(struct sdhci_msm_host *msm_host) > -{ > - u32 regval; > - > - /* ICE Optimizations Enable Sequence */ > - regval = sdhci_msm_ice_readl(msm_host, QCOM_ICE_REG_ADVANCED_CONTROL); > - regval |= 0xD807100; > - /* ICE HPG requires delay before writing */ > - udelay(5); > - sdhci_msm_ice_writel(msm_host, regval, QCOM_ICE_REG_ADVANCED_CONTROL); > - udelay(5); > -} > - > -/* > - * Wait until the ICE BIST (built-in self-test) has completed. > - * > - * This may be necessary before ICE can be used. > - * > - * Note that we don't really care whether the BIST passed or failed; we really > - * just want to make sure that it isn't still running. This is because (a) the > - * BIST is a FIPS compliance thing that never fails in practice, (b) ICE is > - * documented to reject crypto requests if the BIST fails, so we needn't do it > - * in software too, and (c) properly testing storage encryption requires testing > - * the full storage stack anyway, and not relying on hardware-level self-tests. > - */ > -static int sdhci_msm_ice_wait_bist_status(struct sdhci_msm_host *msm_host) > -{ > - u32 regval; > - int err; > - > - err = readl_poll_timeout(msm_host->ice_mem + QCOM_ICE_REG_BIST_STATUS, > - regval, !(regval & QCOM_ICE_BIST_STATUS_MASK), > - 50, 5000); > - if (err) > - dev_err(mmc_dev(msm_host->mmc), > - "Timed out waiting for ICE self-test to complete\n"); > - return err; > -} > - > -static void sdhci_msm_ice_enable(struct sdhci_msm_host *msm_host) > -{ > - if (!(msm_host->mmc->caps2 & MMC_CAP2_CRYPTO)) > - return; > - sdhci_msm_ice_low_power_mode_enable(msm_host); > - sdhci_msm_ice_optimization_enable(msm_host); > - sdhci_msm_ice_wait_bist_status(msm_host); > -} > - > -static int __maybe_unused sdhci_msm_ice_resume(struct sdhci_msm_host *msm_host) > -{ > - if (!(msm_host->mmc->caps2 & MMC_CAP2_CRYPTO)) > - return 0; > - return sdhci_msm_ice_wait_bist_status(msm_host); > -} > - > /* > * Program a key into a QC ICE keyslot, or evict a keyslot. QC ICE requires > * vendor-specific SCM calls for this; it doesn't support the standard way. > */ > +#ifdef CONFIG_MMC_CRYPTO > + > static int sdhci_msm_program_key(struct cqhci_host *cq_host, > const union cqhci_crypto_cfg_entry *cfg, > int slot) > { > - struct device *dev = mmc_dev(cq_host->mmc); > + struct sdhci_host *host = mmc_priv(cq_host->mmc); > + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); > + struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host); > union cqhci_crypto_cap_entry cap; > - union { > - u8 bytes[AES_256_XTS_KEY_SIZE]; > - u32 words[AES_256_XTS_KEY_SIZE / sizeof(u32)]; > - } key; > - int i; > - int err; > - > - if (!(cfg->config_enable & CQHCI_CRYPTO_CONFIGURATION_ENABLE)) > - return qcom_scm_ice_invalidate_key(slot); > + bool config_enable = cfg->config_enable & CQHCI_CRYPTO_CONFIGURATION_ENABLE; > > /* Only AES-256-XTS has been tested so far. */ > cap = cq_host->crypto_cap_array[cfg->crypto_cap_idx]; > - if (cap.algorithm_id != CQHCI_CRYPTO_ALG_AES_XTS || > - cap.key_size != CQHCI_CRYPTO_KEY_SIZE_256) { > - dev_err_ratelimited(dev, > - "Unhandled crypto capability; algorithm_id=%d, key_size=%d\n", > - cap.algorithm_id, cap.key_size); > - return -EINVAL; > - } > - > - memcpy(key.bytes, cfg->crypto_key, AES_256_XTS_KEY_SIZE); > > - /* > - * The SCM call byte-swaps the 32-bit words of the key. So we have to > - * do the same, in order for the final key be correct. > - */ > - for (i = 0; i < ARRAY_SIZE(key.words); i++) > - __cpu_to_be32s(&key.words[i]); > - > - err = qcom_scm_ice_set_key(slot, key.bytes, AES_256_XTS_KEY_SIZE, > - QCOM_SCM_ICE_CIPHER_AES_256_XTS, > - cfg->data_unit_size); > - memzero_explicit(&key, sizeof(key)); > - return err; > -} > -#else /* CONFIG_MMC_CRYPTO */ > -static inline struct clk *sdhci_msm_ice_get_clk(struct device *dev) > -{ > - return NULL; > -} > - > -static inline int sdhci_msm_ice_init(struct sdhci_msm_host *msm_host, > - struct cqhci_host *cq_host) > -{ > - return 0; > -} > - > -static inline void sdhci_msm_ice_enable(struct sdhci_msm_host *msm_host) > -{ > -} > - > -static inline int __maybe_unused > -sdhci_msm_ice_resume(struct sdhci_msm_host *msm_host) > -{ > - return 0; > + return qcom_ice_program_key(msm_host->ice, config_enable, > + cfg->crypto_cap_idx, cap.algorithm_id, > + cap.key_size, cfg->crypto_key, cfg->data_unit_size, slot); > } > #endif /* !CONFIG_MMC_CRYPTO */ > > @@ -2057,7 +1854,7 @@ static void sdhci_msm_cqe_enable(struct mmc_host *mmc) > struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host); > > sdhci_cqe_enable(mmc); > - sdhci_msm_ice_enable(msm_host); > + qcom_ice_enable(msm_host->ice); > } > > static void sdhci_msm_cqe_disable(struct mmc_host *mmc, bool recovery) > @@ -2149,9 +1946,13 @@ static int sdhci_msm_cqe_add_host(struct sdhci_host *host, > > dma64 = host->flags & SDHCI_USE_64_BIT_DMA; > > - ret = sdhci_msm_ice_init(msm_host, cq_host); > - if (ret) > - goto cleanup; > + if (cqhci_readl(cq_host, CQHCI_CAP) & CQHCI_CAP_CS) { > + msm_host->ice = of_qcom_ice_get(&pdev->dev); > + if (IS_ERR(msm_host->ice)) { This is not exactly equivalent to what was happening before because in the case !defined(CONFIG_MMC_CRYPTO) there would be no error here, but now there will be if !IS_ENABLED(CONFIG_QCOM_INLINE_CRYPTO_ENGINE). That may be what you want, but ideally this patch should only change over to the new API and other changes, if desired, should go on top as separate patches. > + ret = PTR_ERR(msm_host->ice); > + goto cleanup; > + } > + } > > ret = cqhci_init(cq_host, host->mmc, dma64); > if (ret) { > @@ -2630,11 +2431,6 @@ static int sdhci_msm_probe(struct platform_device *pdev) > clk = NULL; > msm_host->bulk_clks[3].clk = clk; > > - clk = sdhci_msm_ice_get_clk(&pdev->dev); > - if (IS_ERR(clk)) > - clk = NULL; > - msm_host->bulk_clks[4].clk = clk; > - > ret = clk_bulk_prepare_enable(ARRAY_SIZE(msm_host->bulk_clks), > msm_host->bulk_clks); > if (ret) > @@ -2853,7 +2649,9 @@ static __maybe_unused int sdhci_msm_runtime_resume(struct device *dev) > > dev_pm_opp_set_rate(dev, msm_host->clk_rate); > > - return sdhci_msm_ice_resume(msm_host); > + if (!(msm_host->mmc->caps2 & MMC_CAP2_CRYPTO)) > + return 0; > + return qcom_ice_resume(msm_host->ice); > } > > static const struct dev_pm_ops sdhci_msm_pm_ops = {
diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c index 8ac81d57a3df..ac174d60641a 100644 --- a/drivers/mmc/host/sdhci-msm.c +++ b/drivers/mmc/host/sdhci-msm.c @@ -19,6 +19,8 @@ #include <linux/pinctrl/consumer.h> #include <linux/reset.h> +#include <soc/qcom/ice.h> + #include "sdhci-cqhci.h" #include "sdhci-pltfm.h" #include "cqhci.h" @@ -258,12 +260,12 @@ struct sdhci_msm_variant_info { struct sdhci_msm_host { struct platform_device *pdev; void __iomem *core_mem; /* MSM SDCC mapped address */ - void __iomem *ice_mem; /* MSM ICE mapped address (if available) */ int pwr_irq; /* power irq */ struct clk *bus_clk; /* SDHC bus voter clock */ struct clk *xo_clk; /* TCXO clk needed for FLL feature of cm_dll*/ - /* core, iface, cal, sleep, and ice clocks */ - struct clk_bulk_data bulk_clks[5]; + /* core, iface, cal and sleep clocks */ + struct clk_bulk_data bulk_clks[4]; + struct qcom_ice *ice; unsigned long clk_rate; struct mmc_host *mmc; bool use_14lpp_dll_reset; @@ -1802,233 +1804,28 @@ static void sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock) * * \*****************************************************************************/ -#ifdef CONFIG_MMC_CRYPTO - -#define AES_256_XTS_KEY_SIZE 64 - -/* QCOM ICE registers */ - -#define QCOM_ICE_REG_VERSION 0x0008 - -#define QCOM_ICE_REG_FUSE_SETTING 0x0010 -#define QCOM_ICE_FUSE_SETTING_MASK 0x1 -#define QCOM_ICE_FORCE_HW_KEY0_SETTING_MASK 0x2 -#define QCOM_ICE_FORCE_HW_KEY1_SETTING_MASK 0x4 - -#define QCOM_ICE_REG_BIST_STATUS 0x0070 -#define QCOM_ICE_BIST_STATUS_MASK 0xF0000000 - -#define QCOM_ICE_REG_ADVANCED_CONTROL 0x1000 - -#define sdhci_msm_ice_writel(host, val, reg) \ - writel((val), (host)->ice_mem + (reg)) -#define sdhci_msm_ice_readl(host, reg) \ - readl((host)->ice_mem + (reg)) - -static bool sdhci_msm_ice_supported(struct sdhci_msm_host *msm_host) -{ - struct device *dev = mmc_dev(msm_host->mmc); - u32 regval = sdhci_msm_ice_readl(msm_host, QCOM_ICE_REG_VERSION); - int major = regval >> 24; - int minor = (regval >> 16) & 0xFF; - int step = regval & 0xFFFF; - - /* For now this driver only supports ICE version 3. */ - if (major != 3) { - dev_warn(dev, "Unsupported ICE version: v%d.%d.%d\n", - major, minor, step); - return false; - } - - dev_info(dev, "Found QC Inline Crypto Engine (ICE) v%d.%d.%d\n", - major, minor, step); - - /* If fuses are blown, ICE might not work in the standard way. */ - regval = sdhci_msm_ice_readl(msm_host, QCOM_ICE_REG_FUSE_SETTING); - if (regval & (QCOM_ICE_FUSE_SETTING_MASK | - QCOM_ICE_FORCE_HW_KEY0_SETTING_MASK | - QCOM_ICE_FORCE_HW_KEY1_SETTING_MASK)) { - dev_warn(dev, "Fuses are blown; ICE is unusable!\n"); - return false; - } - return true; -} - -static inline struct clk *sdhci_msm_ice_get_clk(struct device *dev) -{ - return devm_clk_get(dev, "ice"); -} - -static int sdhci_msm_ice_init(struct sdhci_msm_host *msm_host, - struct cqhci_host *cq_host) -{ - struct mmc_host *mmc = msm_host->mmc; - struct device *dev = mmc_dev(mmc); - struct resource *res; - - if (!(cqhci_readl(cq_host, CQHCI_CAP) & CQHCI_CAP_CS)) - return 0; - - res = platform_get_resource_byname(msm_host->pdev, IORESOURCE_MEM, - "ice"); - if (!res) { - dev_warn(dev, "ICE registers not found\n"); - goto disable; - } - - if (!qcom_scm_ice_available()) { - dev_warn(dev, "ICE SCM interface not found\n"); - goto disable; - } - - msm_host->ice_mem = devm_ioremap_resource(dev, res); - if (IS_ERR(msm_host->ice_mem)) - return PTR_ERR(msm_host->ice_mem); - - if (!sdhci_msm_ice_supported(msm_host)) - goto disable; - - mmc->caps2 |= MMC_CAP2_CRYPTO; - return 0; - -disable: - dev_warn(dev, "Disabling inline encryption support\n"); - return 0; -} - -static void sdhci_msm_ice_low_power_mode_enable(struct sdhci_msm_host *msm_host) -{ - u32 regval; - - regval = sdhci_msm_ice_readl(msm_host, QCOM_ICE_REG_ADVANCED_CONTROL); - /* - * Enable low power mode sequence - * [0]-0, [1]-0, [2]-0, [3]-E, [4]-0, [5]-0, [6]-0, [7]-0 - */ - regval |= 0x7000; - sdhci_msm_ice_writel(msm_host, regval, QCOM_ICE_REG_ADVANCED_CONTROL); -} - -static void sdhci_msm_ice_optimization_enable(struct sdhci_msm_host *msm_host) -{ - u32 regval; - - /* ICE Optimizations Enable Sequence */ - regval = sdhci_msm_ice_readl(msm_host, QCOM_ICE_REG_ADVANCED_CONTROL); - regval |= 0xD807100; - /* ICE HPG requires delay before writing */ - udelay(5); - sdhci_msm_ice_writel(msm_host, regval, QCOM_ICE_REG_ADVANCED_CONTROL); - udelay(5); -} - -/* - * Wait until the ICE BIST (built-in self-test) has completed. - * - * This may be necessary before ICE can be used. - * - * Note that we don't really care whether the BIST passed or failed; we really - * just want to make sure that it isn't still running. This is because (a) the - * BIST is a FIPS compliance thing that never fails in practice, (b) ICE is - * documented to reject crypto requests if the BIST fails, so we needn't do it - * in software too, and (c) properly testing storage encryption requires testing - * the full storage stack anyway, and not relying on hardware-level self-tests. - */ -static int sdhci_msm_ice_wait_bist_status(struct sdhci_msm_host *msm_host) -{ - u32 regval; - int err; - - err = readl_poll_timeout(msm_host->ice_mem + QCOM_ICE_REG_BIST_STATUS, - regval, !(regval & QCOM_ICE_BIST_STATUS_MASK), - 50, 5000); - if (err) - dev_err(mmc_dev(msm_host->mmc), - "Timed out waiting for ICE self-test to complete\n"); - return err; -} - -static void sdhci_msm_ice_enable(struct sdhci_msm_host *msm_host) -{ - if (!(msm_host->mmc->caps2 & MMC_CAP2_CRYPTO)) - return; - sdhci_msm_ice_low_power_mode_enable(msm_host); - sdhci_msm_ice_optimization_enable(msm_host); - sdhci_msm_ice_wait_bist_status(msm_host); -} - -static int __maybe_unused sdhci_msm_ice_resume(struct sdhci_msm_host *msm_host) -{ - if (!(msm_host->mmc->caps2 & MMC_CAP2_CRYPTO)) - return 0; - return sdhci_msm_ice_wait_bist_status(msm_host); -} - /* * Program a key into a QC ICE keyslot, or evict a keyslot. QC ICE requires * vendor-specific SCM calls for this; it doesn't support the standard way. */ +#ifdef CONFIG_MMC_CRYPTO + static int sdhci_msm_program_key(struct cqhci_host *cq_host, const union cqhci_crypto_cfg_entry *cfg, int slot) { - struct device *dev = mmc_dev(cq_host->mmc); + struct sdhci_host *host = mmc_priv(cq_host->mmc); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host); union cqhci_crypto_cap_entry cap; - union { - u8 bytes[AES_256_XTS_KEY_SIZE]; - u32 words[AES_256_XTS_KEY_SIZE / sizeof(u32)]; - } key; - int i; - int err; - - if (!(cfg->config_enable & CQHCI_CRYPTO_CONFIGURATION_ENABLE)) - return qcom_scm_ice_invalidate_key(slot); + bool config_enable = cfg->config_enable & CQHCI_CRYPTO_CONFIGURATION_ENABLE; /* Only AES-256-XTS has been tested so far. */ cap = cq_host->crypto_cap_array[cfg->crypto_cap_idx]; - if (cap.algorithm_id != CQHCI_CRYPTO_ALG_AES_XTS || - cap.key_size != CQHCI_CRYPTO_KEY_SIZE_256) { - dev_err_ratelimited(dev, - "Unhandled crypto capability; algorithm_id=%d, key_size=%d\n", - cap.algorithm_id, cap.key_size); - return -EINVAL; - } - - memcpy(key.bytes, cfg->crypto_key, AES_256_XTS_KEY_SIZE); - /* - * The SCM call byte-swaps the 32-bit words of the key. So we have to - * do the same, in order for the final key be correct. - */ - for (i = 0; i < ARRAY_SIZE(key.words); i++) - __cpu_to_be32s(&key.words[i]); - - err = qcom_scm_ice_set_key(slot, key.bytes, AES_256_XTS_KEY_SIZE, - QCOM_SCM_ICE_CIPHER_AES_256_XTS, - cfg->data_unit_size); - memzero_explicit(&key, sizeof(key)); - return err; -} -#else /* CONFIG_MMC_CRYPTO */ -static inline struct clk *sdhci_msm_ice_get_clk(struct device *dev) -{ - return NULL; -} - -static inline int sdhci_msm_ice_init(struct sdhci_msm_host *msm_host, - struct cqhci_host *cq_host) -{ - return 0; -} - -static inline void sdhci_msm_ice_enable(struct sdhci_msm_host *msm_host) -{ -} - -static inline int __maybe_unused -sdhci_msm_ice_resume(struct sdhci_msm_host *msm_host) -{ - return 0; + return qcom_ice_program_key(msm_host->ice, config_enable, + cfg->crypto_cap_idx, cap.algorithm_id, + cap.key_size, cfg->crypto_key, cfg->data_unit_size, slot); } #endif /* !CONFIG_MMC_CRYPTO */ @@ -2057,7 +1854,7 @@ static void sdhci_msm_cqe_enable(struct mmc_host *mmc) struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host); sdhci_cqe_enable(mmc); - sdhci_msm_ice_enable(msm_host); + qcom_ice_enable(msm_host->ice); } static void sdhci_msm_cqe_disable(struct mmc_host *mmc, bool recovery) @@ -2149,9 +1946,13 @@ static int sdhci_msm_cqe_add_host(struct sdhci_host *host, dma64 = host->flags & SDHCI_USE_64_BIT_DMA; - ret = sdhci_msm_ice_init(msm_host, cq_host); - if (ret) - goto cleanup; + if (cqhci_readl(cq_host, CQHCI_CAP) & CQHCI_CAP_CS) { + msm_host->ice = of_qcom_ice_get(&pdev->dev); + if (IS_ERR(msm_host->ice)) { + ret = PTR_ERR(msm_host->ice); + goto cleanup; + } + } ret = cqhci_init(cq_host, host->mmc, dma64); if (ret) { @@ -2630,11 +2431,6 @@ static int sdhci_msm_probe(struct platform_device *pdev) clk = NULL; msm_host->bulk_clks[3].clk = clk; - clk = sdhci_msm_ice_get_clk(&pdev->dev); - if (IS_ERR(clk)) - clk = NULL; - msm_host->bulk_clks[4].clk = clk; - ret = clk_bulk_prepare_enable(ARRAY_SIZE(msm_host->bulk_clks), msm_host->bulk_clks); if (ret) @@ -2853,7 +2649,9 @@ static __maybe_unused int sdhci_msm_runtime_resume(struct device *dev) dev_pm_opp_set_rate(dev, msm_host->clk_rate); - return sdhci_msm_ice_resume(msm_host); + if (!(msm_host->mmc->caps2 & MMC_CAP2_CRYPTO)) + return 0; + return qcom_ice_resume(msm_host->ice); } static const struct dev_pm_ops sdhci_msm_pm_ops = {
Now that there is a new dedicated ICE driver, drop the sdhci-msm ICE implementation and use the new ICE api provided by the Qualcomm soc driver qcom-ice. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> --- drivers/mmc/host/sdhci-msm.c | 252 ++++------------------------------- 1 file changed, 25 insertions(+), 227 deletions(-)