Message ID | 20230223180935.60546-1-otto.pflueger@abscue.de |
---|---|
Headers | show |
Series | clk: qcom: Add clocks for MSM8917 and QM215 | expand |
On 23.02.2023 19:09, Otto Pflüger wrote: > MSM8917 has mostly the same rpm clocks as MSM8953, but lacks RF_CLK3 and > IPA_CLK and additionally has the BIMC_GPU clock. > > Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad > Changes in v2: > - Rebased onto linux-next-20230223 > --- > drivers/clk/qcom/clk-smd-rpm.c | 35 ++++++++++++++++++++++++++++++++++ > 1 file changed, 35 insertions(+) > > diff --git a/drivers/clk/qcom/clk-smd-rpm.c b/drivers/clk/qcom/clk-smd-rpm.c > index 198886c1b6c8..ae6559c7efab 100644 > --- a/drivers/clk/qcom/clk-smd-rpm.c > +++ b/drivers/clk/qcom/clk-smd-rpm.c > @@ -573,6 +573,40 @@ static const struct rpm_smd_clk_desc rpm_clk_msm8916 = { > .num_clks = ARRAY_SIZE(msm8916_clks), > }; > > +static struct clk_smd_rpm *msm8917_clks[] = { > + [RPM_SMD_XO_CLK_SRC] = &clk_smd_rpm_branch_bi_tcxo, > + [RPM_SMD_XO_A_CLK_SRC] = &clk_smd_rpm_branch_bi_tcxo_a, > + [RPM_SMD_PNOC_CLK] = &clk_smd_rpm_bus_0_pcnoc_clk, > + [RPM_SMD_PNOC_A_CLK] = &clk_smd_rpm_bus_0_pcnoc_a_clk, > + [RPM_SMD_SNOC_CLK] = &clk_smd_rpm_bus_1_snoc_clk, > + [RPM_SMD_SNOC_A_CLK] = &clk_smd_rpm_bus_1_snoc_a_clk, > + [RPM_SMD_BIMC_CLK] = &clk_smd_rpm_bimc_clk, > + [RPM_SMD_BIMC_A_CLK] = &clk_smd_rpm_bimc_a_clk, > + [RPM_SMD_BIMC_GPU_CLK] = &clk_smd_rpm_bimc_gpu_clk, > + [RPM_SMD_BIMC_GPU_A_CLK] = &clk_smd_rpm_bimc_gpu_a_clk, > + [RPM_SMD_SYSMMNOC_CLK] = &clk_smd_rpm_bus_2_sysmmnoc_clk, > + [RPM_SMD_SYSMMNOC_A_CLK] = &clk_smd_rpm_bus_2_sysmmnoc_a_clk, > + [RPM_SMD_QDSS_CLK] = &clk_smd_rpm_qdss_clk, > + [RPM_SMD_QDSS_A_CLK] = &clk_smd_rpm_qdss_a_clk, > + [RPM_SMD_BB_CLK1] = &clk_smd_rpm_bb_clk1, > + [RPM_SMD_BB_CLK1_A] = &clk_smd_rpm_bb_clk1_a, > + [RPM_SMD_BB_CLK2] = &clk_smd_rpm_bb_clk2, > + [RPM_SMD_BB_CLK2_A] = &clk_smd_rpm_bb_clk2_a, > + [RPM_SMD_RF_CLK2] = &clk_smd_rpm_rf_clk2, > + [RPM_SMD_RF_CLK2_A] = &clk_smd_rpm_rf_clk2_a, > + [RPM_SMD_DIV_CLK2] = &clk_smd_rpm_div_clk2, > + [RPM_SMD_DIV_A_CLK2] = &clk_smd_rpm_div_clk2_a, > + [RPM_SMD_BB_CLK1_PIN] = &clk_smd_rpm_bb_clk1_pin, > + [RPM_SMD_BB_CLK1_A_PIN] = &clk_smd_rpm_bb_clk1_a_pin, > + [RPM_SMD_BB_CLK2_PIN] = &clk_smd_rpm_bb_clk2_pin, > + [RPM_SMD_BB_CLK2_A_PIN] = &clk_smd_rpm_bb_clk2_a_pin, > +}; > + > +static const struct rpm_smd_clk_desc rpm_clk_msm8917 = { > + .clks = msm8917_clks, > + .num_clks = ARRAY_SIZE(msm8917_clks), > +}; > + > static struct clk_smd_rpm *msm8936_clks[] = { > [RPM_SMD_XO_CLK_SRC] = &clk_smd_rpm_branch_bi_tcxo, > [RPM_SMD_XO_A_CLK_SRC] = &clk_smd_rpm_branch_bi_tcxo_a, > @@ -1228,6 +1262,7 @@ static const struct of_device_id rpm_smd_clk_match_table[] = { > { .compatible = "qcom,rpmcc-msm8226", .data = &rpm_clk_msm8974 }, > { .compatible = "qcom,rpmcc-msm8909", .data = &rpm_clk_msm8909 }, > { .compatible = "qcom,rpmcc-msm8916", .data = &rpm_clk_msm8916 }, > + { .compatible = "qcom,rpmcc-msm8917", .data = &rpm_clk_msm8917 }, > { .compatible = "qcom,rpmcc-msm8936", .data = &rpm_clk_msm8936 }, > { .compatible = "qcom,rpmcc-msm8953", .data = &rpm_clk_msm8953 }, > { .compatible = "qcom,rpmcc-msm8974", .data = &rpm_clk_msm8974 },
On Thu, 23 Feb 2023 19:09:31 +0100, Otto Pflüger wrote: > Add support for clocks, resets and power domains provided by the global > clock controller (GCC) and clocks controlled by the RPM firmware on > MSM8917/QM215 SoCs. > > The only clock configuration difference between QM215 and MSM8917 > is the source mapping of the GPU clock, so a single driver is used > for both SoCs. > > [...] Applied, thanks! [2/4] clk: qcom: Add global clock controller driver for MSM8917 commit: 33cc27a47d3ab6b598bf7f7dcd3a858458a4ec1d [4/4] clk: qcom: smd-rpm: Add clocks for MSM8917 commit: 134da70c6406184d815a491fc9535627a05e764b Best regards,