new file mode 100644
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/wlf,wm8960.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Wolfson WM8960 audio codec
+
+maintainers:
+ - patches@opensource.cirrus.com
+
+properties:
+ compatible:
+ const: wlf,wm8960
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: mclk
+
+ '#sound-dai-cells':
+ const: 0
+
+ wlf,capless:
+ type: boolean
+ description:
+ If present, OUT3 pin will be enabled and disabled together with HP_L and
+ HP_R pins in response to jack detect events.
+
+ wlf,gpio-cfg:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ maxItems: 2
+ description: |
+ A list of GPIO configuration register values.
+ - gpio-cfg[0]: ALRCGPIO of R9 (Audio interface)
+ - gpio-cfg[1]: {GPIOPOL:GPIOSEL[2:0]} of R48 (Additional Control 4).
+
+ wlf,hp-cfg:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ maxItems: 3
+ description: |
+ A list of headphone jack detect configuration register values:
+ - hp-cfg[0]: HPSEL[1:0] of R48 (Additional Control 4).
+ - hp-cfg[1]: {HPSWEN:HPSWPOL} of R24 (Additional Control 2).
+ - hp-cfg[2]: {TOCLKSEL:TOEN} of R23 (Additional Control 1).
+
+ wlf,shared-lrclk:
+ type: boolean
+ description:
+ If present, the LRCM bit of R24 (Additional control 2) gets set,
+ indicating that ADCLRC and DACLRC pins will be disabled only when ADC
+ (Left and Right) and DAC (Left and Right) are disabled.
+ When WM8960 works on synchronize mode and DACLRC pin is used to supply
+ frame clock, it will no frame clock for captrue unless enable DAC to
+ enable DACLRC pin. If shared-lrclk is present, no need to enable DAC for
+ captrue.
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - $ref: dai-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ audio-codec@1a {
+ compatible = "wlf,wm8960";
+ reg = <0x1a>;
+ clocks = <&clks 0>;
+ clock-names = "mclk";
+ #sound-dai-cells = <0>;
+ wlf,hp-cfg = <3 2 3>;
+ wlf,gpio-cfg = <1 3>;
+ wlf,shared-lrclk;
+ };
+ };
deleted file mode 100644
@@ -1,42 +0,0 @@
-WM8960 audio CODEC
-
-This device supports I2C only.
-
-Required properties:
-
- - compatible : "wlf,wm8960"
-
- - reg : the I2C address of the device.
-
-Optional properties:
- - wlf,shared-lrclk: This is a boolean property. If present, the LRCM bit of
- R24 (Additional control 2) gets set, indicating that ADCLRC and DACLRC pins
- will be disabled only when ADC (Left and Right) and DAC (Left and Right)
- are disabled.
- When wm8960 works on synchronize mode and DACLRC pin is used to supply
- frame clock, it will no frame clock for captrue unless enable DAC to enable
- DACLRC pin. If shared-lrclk is present, no need to enable DAC for captrue.
-
- - wlf,capless: This is a boolean property. If present, OUT3 pin will be
- enabled and disabled together with HP_L and HP_R pins in response to jack
- detect events.
-
- - wlf,hp-cfg: A list of headphone jack detect configuration register values.
- The list must be 3 entries long.
- hp-cfg[0]: HPSEL[1:0] of R48 (Additional Control 4).
- hp-cfg[1]: {HPSWEN:HPSWPOL} of R24 (Additional Control 2).
- hp-cfg[2]: {TOCLKSEL:TOEN} of R23 (Additional Control 1).
-
- - wlf,gpio-cfg: A list of GPIO configuration register values.
- The list must be 2 entries long.
- gpio-cfg[0]: ALRCGPIO of R9 (Audio interface)
- gpio-cfg[1]: {GPIOPOL:GPIOSEL[2:0]} of R48 (Additional Control 4).
-
-Example:
-
-wm8960: codec@1a {
- compatible = "wlf,wm8960";
- reg = <0x1a>;
-
- wlf,shared-lrclk;
-};
Convert the Wolfson WM8960 audio codecs bindings to DT schema. Changes against original binding: 1. Document clocks and clock-names - already present in DTS and used by Linux driver. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- One DTS warning still remains: uniphier-pxs2-gentil.dtb: wm8960@1a: Unevaluated properties are not allowed ('port@0' was unexpected) I am not sure if this is correct usage of endpoints. I would assume the codec should be used only as DAI. --- .../devicetree/bindings/sound/wlf,wm8960.yaml | 88 +++++++++++++++++++ .../devicetree/bindings/sound/wm8960.txt | 42 --------- 2 files changed, 88 insertions(+), 42 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/wlf,wm8960.yaml delete mode 100644 Documentation/devicetree/bindings/sound/wm8960.txt