| Message ID | 20230211165715.4024992-3-niklas.soderlund+renesas@ragnatech.se |
|---|---|
| State | New |
| Headers | show |
| Series | arm64: dts: renesas: draak: Make HDMI default video source | expand |
Hi Niklas, Thank you for the patch. On Sat, Feb 11, 2023 at 05:57:15PM +0100, Niklas Söderlund wrote: > From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > > The Draak board has an ADV7180 CVBS decoder and an ADV7612 HDMI decoder, > both connected to the same VIN input. DIP switches are used to select > one of the two devices, with the HDMI decoder being the default. Add an > overlay that selects the CVBS decoder. > > Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > [Niklas: Inverted it from HDMI to CVBS] > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > --- > arch/arm64/boot/dts/renesas/Makefile | 1 + > .../boot/dts/renesas/draak-cvbs-input.dtso | 33 +++++++++++++++++++ > 2 files changed, 34 insertions(+) > create mode 100644 arch/arm64/boot/dts/renesas/draak-cvbs-input.dtso > > diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile > index 0699b51c1247..f5df37253184 100644 > --- a/arch/arm64/boot/dts/renesas/Makefile > +++ b/arch/arm64/boot/dts/renesas/Makefile > @@ -87,5 +87,6 @@ dtb-$(CONFIG_ARCH_R9A07G054) += r9a07g054l2-smarc.dtb > > dtb-$(CONFIG_ARCH_R9A09G011) += r9a09g011-v2mevk2.dtb > > +dtb-$(CONFIG_ARCH_RCAR_GEN3) += draak-cvbs-input.dtbo > dtb-$(CONFIG_ARCH_RCAR_GEN3) += draak-ebisu-panel-aa104xd12.dtbo > dtb-$(CONFIG_ARCH_RCAR_GEN3) += salvator-panel-aa104xd12.dtbo > diff --git a/arch/arm64/boot/dts/renesas/draak-cvbs-input.dtso b/arch/arm64/boot/dts/renesas/draak-cvbs-input.dtso > new file mode 100644 > index 000000000000..b833c58c2029 > --- /dev/null > +++ b/arch/arm64/boot/dts/renesas/draak-cvbs-input.dtso > @@ -0,0 +1,33 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright 2023 Ideas on Board Oy > + * > + * Device tree overlay for the Draak board, to enable CVBS input. This requires > + * setting DIP switches SW49, SW50, SW51 and SW52 to OFF, and SW53 and SW54 to > + * ON. > + */ > + > +/dts-v1/; > +/plugin/; > + > +&adv7180_out { > + remote-endpoint = <&vin4_in>; > +}; > + > +&i2c0 { > + hdmi-decoder@4c { > + ports { > + port@2 { > + /delete-node/ endpoint; > + }; > + }; > + }; > +}; > + > +&vin4_in { > + remote-endpoint = <&adv7180_out>; > +}; > + > +&vin4_pins { > + groups = "vin4_data8", "vin4_sync", "vin4_clk"; > +};
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index 0699b51c1247..f5df37253184 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -87,5 +87,6 @@ dtb-$(CONFIG_ARCH_R9A07G054) += r9a07g054l2-smarc.dtb dtb-$(CONFIG_ARCH_R9A09G011) += r9a09g011-v2mevk2.dtb +dtb-$(CONFIG_ARCH_RCAR_GEN3) += draak-cvbs-input.dtbo dtb-$(CONFIG_ARCH_RCAR_GEN3) += draak-ebisu-panel-aa104xd12.dtbo dtb-$(CONFIG_ARCH_RCAR_GEN3) += salvator-panel-aa104xd12.dtbo diff --git a/arch/arm64/boot/dts/renesas/draak-cvbs-input.dtso b/arch/arm64/boot/dts/renesas/draak-cvbs-input.dtso new file mode 100644 index 000000000000..b833c58c2029 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/draak-cvbs-input.dtso @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2023 Ideas on Board Oy + * + * Device tree overlay for the Draak board, to enable CVBS input. This requires + * setting DIP switches SW49, SW50, SW51 and SW52 to OFF, and SW53 and SW54 to + * ON. + */ + +/dts-v1/; +/plugin/; + +&adv7180_out { + remote-endpoint = <&vin4_in>; +}; + +&i2c0 { + hdmi-decoder@4c { + ports { + port@2 { + /delete-node/ endpoint; + }; + }; + }; +}; + +&vin4_in { + remote-endpoint = <&adv7180_out>; +}; + +&vin4_pins { + groups = "vin4_data8", "vin4_sync", "vin4_clk"; +};