Message ID | 20230127211748.260718-1-krzysztof.kozlowski@linaro.org |
---|---|
State | New |
Headers | show |
Series | [v2] dt-bindings: usb: samsung,exynos-dwc3: allow unit address in DTS | expand |
On Fri, 27 Jan 2023 22:17:48 +0100, Krzysztof Kozlowski wrote: > The Samsung Exynos SoC USB 3.0 DWC3 Controller is a simple wrapper of > actual DWC3 Controller device node. It handles necessary Samsung > Exynos-specific resources (regulators, clocks), but does not have its > own MMIO address space. > > However neither simple-bus bindings nor dtc W=1 accept device nodes in > soc@ node which do not have unit address. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > --- > > Changes since v1: > 1. Use ranges with values and drop reg from usb-wrapper node. > 2. Keep "usb" as wrapper's node name. > > DTS fixes are here: > https://lore.kernel.org/linux-samsung-soc/20230127211527.260060-1-krzysztof.kozlowski@linaro.org/T/#t > --- > .../devicetree/bindings/usb/samsung,exynos-dwc3.yaml | 8 ++++---- > 1 file changed, 4 insertions(+), 4 deletions(-) > Reviewed-by: Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml b/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml index 6b9a3bcb3926..42ceaf13cd5d 100644 --- a/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml @@ -108,19 +108,19 @@ examples: #include <dt-bindings/clock/exynos5420.h> #include <dt-bindings/interrupt-controller/arm-gic.h> - usb { + usb@12000000 { compatible = "samsung,exynos5250-dwusb3"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0x0 0x12000000 0x10000>; clocks = <&clock CLK_USBD300>; clock-names = "usbdrd30"; vdd33-supply = <&ldo9_reg>; vdd10-supply = <&ldo11_reg>; - usb@12000000 { + usb@0 { compatible = "snps,dwc3"; - reg = <0x12000000 0x10000>; + reg = <0x0 0x10000>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>; phy-names = "usb2-phy", "usb3-phy";
The Samsung Exynos SoC USB 3.0 DWC3 Controller is a simple wrapper of actual DWC3 Controller device node. It handles necessary Samsung Exynos-specific resources (regulators, clocks), but does not have its own MMIO address space. However neither simple-bus bindings nor dtc W=1 accept device nodes in soc@ node which do not have unit address. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- Changes since v1: 1. Use ranges with values and drop reg from usb-wrapper node. 2. Keep "usb" as wrapper's node name. DTS fixes are here: https://lore.kernel.org/linux-samsung-soc/20230127211527.260060-1-krzysztof.kozlowski@linaro.org/T/#t --- .../devicetree/bindings/usb/samsung,exynos-dwc3.yaml | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)