| Message ID | 20230118184413.395820-3-krzysztof.kozlowski@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [1/5] dt-bindings: iio: drop unneeded quotes | expand |
On Wed, 18 Jan 2023 19:44:11 +0100 Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote: > Do not use underscores and unneeded suffixes (e.g. i2c0) in node name in > examples. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- > diff --git a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml > index 6c5ad426a016..12f75ddc4a70 100644 > --- a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml > +++ b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml > @@ -42,7 +42,7 @@ examples: > #address-cells = <1>; > #size-cells = <0>; > > - heart_mon@0 { > + heart-rate@0 { These are both heart-rate and pulse oximeters so measure more than just the rate (oxygen saturation in the blood). Reality is they actually measure light absorption over time, but you can calculate an estimate of both rate and oxygen saturation from that. I don't really mind simplifying that to heart-rate, but wanted to call this out for possible discussion. > compatible = "ti,afe4403"; > reg = <0>; > spi-max-frequency = <10000000>; > diff --git a/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml b/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml > index c0e815d9999e..b334f3e356ad 100644 > --- a/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml > +++ b/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml > @@ -39,7 +39,7 @@ examples: > #address-cells = <1>; > #size-cells = <0>; > > - heart_mon@58 { > + heart-rate@58 { > compatible = "ti,afe4404"; > reg = <0x58>; > tx-supply = <&vbat>; The rest are all fine. If no one comments I'll pick this up as it is in a few days. Jonathan
On 21/01/2023 18:17, Jonathan Cameron wrote: > On Wed, 18 Jan 2023 19:44:11 +0100 > Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote: > >> Do not use underscores and unneeded suffixes (e.g. i2c0) in node name in >> examples. >> >> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> >> --- > >> diff --git a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml >> index 6c5ad426a016..12f75ddc4a70 100644 >> --- a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml >> +++ b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml >> @@ -42,7 +42,7 @@ examples: >> #address-cells = <1>; >> #size-cells = <0>; >> >> - heart_mon@0 { >> + heart-rate@0 { > > These are both heart-rate and pulse oximeters so measure more than just > the rate (oxygen saturation in the blood). Reality is they actually > measure light absorption over time, but you can calculate an estimate > of both rate and oxygen saturation from that. > > I don't really mind simplifying that to heart-rate, but wanted to > call this out for possible discussion. They could be heart-mon. The fix is mostly around the underscore. I don't have any arguments for changing it to heart-rate, thus we can go with whatever you prefer. Best regards, Krzysztof
On Sat, 21 Jan 2023 19:31:23 +0100 Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote: > On 21/01/2023 18:17, Jonathan Cameron wrote: > > On Wed, 18 Jan 2023 19:44:11 +0100 > > Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote: > > > >> Do not use underscores and unneeded suffixes (e.g. i2c0) in node name in > >> examples. > >> > >> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > >> --- > > > >> diff --git a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml > >> index 6c5ad426a016..12f75ddc4a70 100644 > >> --- a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml > >> +++ b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml > >> @@ -42,7 +42,7 @@ examples: > >> #address-cells = <1>; > >> #size-cells = <0>; > >> > >> - heart_mon@0 { > >> + heart-rate@0 { > > > > These are both heart-rate and pulse oximeters so measure more than just > > the rate (oxygen saturation in the blood). Reality is they actually > > measure light absorption over time, but you can calculate an estimate > > of both rate and oxygen saturation from that. > > > > I don't really mind simplifying that to heart-rate, but wanted to > > call this out for possible discussion. > > They could be heart-mon. The fix is mostly around the underscore. I > don't have any arguments for changing it to heart-rate, thus we can go > with whatever you prefer. I'm fine with either and as we have a patch with heart-rate that wins currently. I'll just let this sit for a little longer than normal to see if we get any other responses! Thanks, Jonathan > > Best regards, > Krzysztof >
On Sun, Jan 22, 2023 at 05:01:05PM +0000, Jonathan Cameron wrote: > On Sat, 21 Jan 2023 19:31:23 +0100 > Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote: > > > On 21/01/2023 18:17, Jonathan Cameron wrote: > > > On Wed, 18 Jan 2023 19:44:11 +0100 > > > Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote: > > > > > >> Do not use underscores and unneeded suffixes (e.g. i2c0) in node name in > > >> examples. > > >> > > >> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > >> --- > > > > > >> diff --git a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml > > >> index 6c5ad426a016..12f75ddc4a70 100644 > > >> --- a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml > > >> +++ b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml > > >> @@ -42,7 +42,7 @@ examples: > > >> #address-cells = <1>; > > >> #size-cells = <0>; > > >> > > >> - heart_mon@0 { > > >> + heart-rate@0 { > > > > > > These are both heart-rate and pulse oximeters so measure more than just > > > the rate (oxygen saturation in the blood). Reality is they actually > > > measure light absorption over time, but you can calculate an estimate > > > of both rate and oxygen saturation from that. > > > > > > I don't really mind simplifying that to heart-rate, but wanted to > > > call this out for possible discussion. > > > > They could be heart-mon. The fix is mostly around the underscore. I > > don't have any arguments for changing it to heart-rate, thus we can go > > with whatever you prefer. > I'm fine with either and as we have a patch with heart-rate that wins > currently. I'll just let this sit for a little longer than > normal to see if we get any other responses! I don't care all that much until we've documented something. Otherwise, we may be just changing things twice. We have the list in the spec, but really I'd like that in schema form. We'd also need to figure out how to use that. There's always going to be odd things which we don't have any defined name. For now, I'd just do 's/_/-/'. Rob
On Wed, 18 Jan 2023 19:44:11 +0100, Krzysztof Kozlowski wrote: > Do not use underscores and unneeded suffixes (e.g. i2c0) in node name in > examples. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- > .../devicetree/bindings/iio/accel/adi,adis16201.yaml | 2 +- > .../devicetree/bindings/iio/accel/adi,adis16240.yaml | 2 +- > .../devicetree/bindings/iio/accel/adi,adxl313.yaml | 2 +- > .../devicetree/bindings/iio/accel/adi,adxl345.yaml | 4 ++-- > .../devicetree/bindings/iio/accel/bosch,bma220.yaml | 2 +- > .../devicetree/bindings/iio/accel/nxp,fxls8962af.yaml | 4 ++-- > Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml | 2 +- > Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml | 2 +- > Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml | 2 +- > .../devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml | 2 +- > .../devicetree/bindings/iio/adc/st,stmpe-adc.yaml | 8 +++----- > .../devicetree/bindings/iio/frequency/adf4371.yaml | 2 +- > .../devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml | 4 ++-- > .../devicetree/bindings/iio/health/ti,afe4403.yaml | 2 +- > .../devicetree/bindings/iio/health/ti,afe4404.yaml | 2 +- > Documentation/devicetree/bindings/iio/humidity/dht11.yaml | 2 +- > .../devicetree/bindings/iio/humidity/ti,hdc2010.yaml | 2 +- > .../devicetree/bindings/iio/imu/adi,adis16460.yaml | 2 +- > .../devicetree/bindings/iio/imu/invensense,icm42600.yaml | 4 ++-- > .../devicetree/bindings/iio/imu/nxp,fxos8700.yaml | 4 ++-- > .../devicetree/bindings/iio/pressure/asc,dlhl60d.yaml | 2 +- > .../devicetree/bindings/iio/pressure/bmp085.yaml | 2 +- > .../bindings/iio/temperature/maxim,max31865.yaml | 2 +- > 23 files changed, 30 insertions(+), 32 deletions(-) > Acked-by: Rob Herring <robh@kernel.org>
On 23/01/2023 21:33, Rob Herring wrote: until we've documented something. Otherwise, > we may be just changing things twice. We have the list in the spec, but > really I'd like that in schema form. We'd also need to figure out how to > use that. There's always going to be odd things which we don't have any > defined name. > > For now, I'd just do 's/_/-/'. I'll send a v2 with fixes. Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml index 7332442e5661..b6ba7ad1a8d5 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml @@ -41,7 +41,7 @@ unevaluatedProperties: false examples: - | #include <dt-bindings/interrupt-controller/irq.h> - spi0 { + spi { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml index f6f97164c2ca..5887021cc90f 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml @@ -39,7 +39,7 @@ examples: - | #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> - spi0 { + spi { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml index 185b68ffb536..0c5b64cae965 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml @@ -59,7 +59,7 @@ examples: - | #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml index 346abfb13a3a..07cacc3f6a97 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml @@ -49,7 +49,7 @@ examples: - | #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; @@ -64,7 +64,7 @@ examples: - | #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> - spi0 { + spi { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml index 5dd06f5905b4..ec643de031a3 100644 --- a/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml @@ -36,7 +36,7 @@ unevaluatedProperties: false examples: - | #include <dt-bindings/interrupt-controller/irq.h> - spi0 { + spi { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml index 65ce8ea14b52..783c7ddfcd90 100644 --- a/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml +++ b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml @@ -50,7 +50,7 @@ unevaluatedProperties: false examples: - | #include <dt-bindings/interrupt-controller/irq.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; @@ -65,7 +65,7 @@ examples: }; - | #include <dt-bindings/interrupt-controller/irq.h> - spi0 { + spi { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml index cc347dade4ef..1d965124c488 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml @@ -99,7 +99,7 @@ unevaluatedProperties: false examples: - | - spi0 { + spi { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml index ac5a47c8f070..b05652dfd4a2 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml @@ -112,7 +112,7 @@ examples: - | #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> - spi0 { + spi { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml index a67ba67dab51..5fcc8dd012f1 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml @@ -72,7 +72,7 @@ additionalProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> - spi0 { + spi { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml index 18aaf6df179d..73def67fbe01 100644 --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml @@ -50,7 +50,7 @@ additionalProperties: false examples: - | #include <dt-bindings/interrupt-controller/irq.h> - spmi_bus { + spmi { #address-cells = <1>; #size-cells = <0>; pmic_iadc: adc@3600 { diff --git a/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml index 333744a2159c..474e35c49348 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml @@ -35,10 +35,8 @@ additionalProperties: false examples: - | - stmpe { - stmpe_adc { - compatible = "st,stmpe-adc"; - st,norequest-mask = <0x0F>; /* dont use ADC CH3-0 */ - }; + adc { + compatible = "st,stmpe-adc"; + st,norequest-mask = <0x0f>; /* dont use ADC CH3-0 */ }; ... diff --git a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml index 0144f74a4768..a0a5e5919987 100644 --- a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml +++ b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml @@ -53,7 +53,7 @@ unevaluatedProperties: false examples: - | - spi0 { + spi { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml index 2c900e9dddc6..052dccbb5eea 100644 --- a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml +++ b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml @@ -65,7 +65,7 @@ examples: - | #include <dt-bindings/interrupt-controller/irq.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; @@ -81,7 +81,7 @@ examples: interrupt-names = "INT1"; }; }; - spi0 { + spi { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml index 6c5ad426a016..12f75ddc4a70 100644 --- a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml +++ b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml @@ -42,7 +42,7 @@ examples: #address-cells = <1>; #size-cells = <0>; - heart_mon@0 { + heart-rate@0 { compatible = "ti,afe4403"; reg = <0>; spi-max-frequency = <10000000>; diff --git a/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml b/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml index c0e815d9999e..b334f3e356ad 100644 --- a/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml +++ b/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml @@ -39,7 +39,7 @@ examples: #address-cells = <1>; #size-cells = <0>; - heart_mon@58 { + heart-rate@58 { compatible = "ti,afe4404"; reg = <0x58>; tx-supply = <&vbat>; diff --git a/Documentation/devicetree/bindings/iio/humidity/dht11.yaml b/Documentation/devicetree/bindings/iio/humidity/dht11.yaml index 2247481d0203..0103f4238942 100644 --- a/Documentation/devicetree/bindings/iio/humidity/dht11.yaml +++ b/Documentation/devicetree/bindings/iio/humidity/dht11.yaml @@ -34,7 +34,7 @@ additionalProperties: false examples: - | - humidity_sensor { + humidity-sensor { compatible = "dht11"; gpios = <&gpio0 6 0>; }; diff --git a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml index 88384b69f917..a36173b0c654 100644 --- a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml +++ b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml @@ -35,7 +35,7 @@ additionalProperties: false examples: - | - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml index d166dbca18c3..4e43c80e5119 100644 --- a/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml +++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml @@ -42,7 +42,7 @@ examples: - | #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> - spi0 { + spi { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml index 13c9abdd3131..3ecfb3f086bc 100644 --- a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml +++ b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml @@ -65,7 +65,7 @@ examples: - | #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; @@ -81,7 +81,7 @@ examples: - | #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> - spi0 { + spi { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml index 24416b59b782..db6a145840f7 100644 --- a/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml +++ b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml @@ -49,7 +49,7 @@ examples: - | #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; @@ -65,7 +65,7 @@ examples: - | #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> - spi0 { + spi { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml index 1f9fe15b4b3c..9fb8d773efa3 100644 --- a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml +++ b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml @@ -39,7 +39,7 @@ examples: - | #include <dt-bindings/interrupt-controller/irq.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml index 72cd2c2d3f17..256f537840e4 100644 --- a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml +++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml @@ -60,7 +60,7 @@ examples: - | #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; pressure@77 { diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml index a2823ed6867b..66394e17fcc8 100644 --- a/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml @@ -43,7 +43,7 @@ examples: #address-cells = <1>; #size-cells = <0>; - temp_sensor@0 { + temperature-sensor@0 { compatible = "maxim,max31865"; reg = <0>; spi-max-frequency = <400000>;
Do not use underscores and unneeded suffixes (e.g. i2c0) in node name in examples. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- .../devicetree/bindings/iio/accel/adi,adis16201.yaml | 2 +- .../devicetree/bindings/iio/accel/adi,adis16240.yaml | 2 +- .../devicetree/bindings/iio/accel/adi,adxl313.yaml | 2 +- .../devicetree/bindings/iio/accel/adi,adxl345.yaml | 4 ++-- .../devicetree/bindings/iio/accel/bosch,bma220.yaml | 2 +- .../devicetree/bindings/iio/accel/nxp,fxls8962af.yaml | 4 ++-- Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml | 2 +- Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml | 2 +- Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml | 2 +- .../devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml | 2 +- .../devicetree/bindings/iio/adc/st,stmpe-adc.yaml | 8 +++----- .../devicetree/bindings/iio/frequency/adf4371.yaml | 2 +- .../devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml | 4 ++-- .../devicetree/bindings/iio/health/ti,afe4403.yaml | 2 +- .../devicetree/bindings/iio/health/ti,afe4404.yaml | 2 +- Documentation/devicetree/bindings/iio/humidity/dht11.yaml | 2 +- .../devicetree/bindings/iio/humidity/ti,hdc2010.yaml | 2 +- .../devicetree/bindings/iio/imu/adi,adis16460.yaml | 2 +- .../devicetree/bindings/iio/imu/invensense,icm42600.yaml | 4 ++-- .../devicetree/bindings/iio/imu/nxp,fxos8700.yaml | 4 ++-- .../devicetree/bindings/iio/pressure/asc,dlhl60d.yaml | 2 +- .../devicetree/bindings/iio/pressure/bmp085.yaml | 2 +- .../bindings/iio/temperature/maxim,max31865.yaml | 2 +- 23 files changed, 30 insertions(+), 32 deletions(-)