| Message ID | a85c256af01f64389a078c2b37c3b72a27d97536.1668005062.git.geert+renesas@glider.be |
|---|---|
| State | Superseded |
| Headers | show |
| Series | dt-bindings: leds: Document Bluetooth and WLAN triggers | expand |
On 09/11/2022 15:46, Geert Uytterhoeven wrote: > Add the missing trigger patterns for Bluetooth and WLAN activity, which > are already in active use. > > While at it, move the mmc pattern comment where it belongs, and restore > alphabetical sort order. > > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> > --- > arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2.dtb: leds: bt_active_led:linux,default-trigger: 'oneOf' conditional failed, one must be fixed: > 'hci0-power' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern'] > 'hci0-power' does not match '^mmc[0-9]+$' > From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml > arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2.dtb: leds: wlan_active_led:linux,default-trigger: 'oneOf' conditional failed, one must be fixed: > 'phy0tx' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern'] > 'phy0tx' does not match '^mmc[0-9]+$' > From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml This patch got lost... Rob, Lee or Pavel, can you pick it up? It's with Rob's approval: https://lore.kernel.org/all/166861772609.231295.14812410099261417331.robh@kernel.org/ > --- > Documentation/devicetree/bindings/leds/common.yaml | 8 ++++++-- > 1 file changed, 6 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml > index f5c57a580078ea23..d34bb58c00371402 100644 > --- a/Documentation/devicetree/bindings/leds/common.yaml > +++ b/Documentation/devicetree/bindings/leds/common.yaml > @@ -98,9 +98,13 @@ properties: > # LED alters the brightness for the specified duration with one software > # timer (requires "led-pattern" property) > - pattern > - # LED is triggered by SD/MMC activity > - - pattern: "^mmc[0-9]+$" > - pattern: "^cpu[0-9]*$" > + - pattern: "^hci[0-9]+-power$" > + # LED is triggered by Bluetooth activity > + - pattern: "^mmc[0-9]+$" > + # LED is triggered by SD/MMC activity > + - pattern: "^phy[0-9]+tx$" > + # LED is triggered by WLAN activity > > led-pattern: > description: | Best regards, Krzysztof
Hi Krzysztof, On Fri, Jan 20, 2023 at 8:42 AM Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote: > > On 09/11/2022 15:46, Geert Uytterhoeven wrote: > > Add the missing trigger patterns for Bluetooth and WLAN activity, which > > are already in active use. > > > > While at it, move the mmc pattern comment where it belongs, and restore > > alphabetical sort order. > > > > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> > > --- > > arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2.dtb: leds: bt_active_led:linux,default-trigger: 'oneOf' conditional failed, one must be fixed: > > 'hci0-power' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern'] > > 'hci0-power' does not match '^mmc[0-9]+$' > > From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml > > arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2.dtb: leds: wlan_active_led:linux,default-trigger: 'oneOf' conditional failed, one must be fixed: > > 'phy0tx' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern'] > > 'phy0tx' does not match '^mmc[0-9]+$' > > From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml > > This patch got lost... Rob, Lee or Pavel, can you pick it up? > > It's with Rob's approval: > https://lore.kernel.org/all/166861772609.231295.14812410099261417331.robh@kernel.org/ If it is going to be applied via bluetooth-next make sure to resend it since last time our CI was not able to apply it thus why we didn't apply it in the first place. > > > --- > > Documentation/devicetree/bindings/leds/common.yaml | 8 ++++++-- > > 1 file changed, 6 insertions(+), 2 deletions(-) > > > > diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml > > index f5c57a580078ea23..d34bb58c00371402 100644 > > --- a/Documentation/devicetree/bindings/leds/common.yaml > > +++ b/Documentation/devicetree/bindings/leds/common.yaml > > @@ -98,9 +98,13 @@ properties: > > # LED alters the brightness for the specified duration with one software > > # timer (requires "led-pattern" property) > > - pattern > > - # LED is triggered by SD/MMC activity > > - - pattern: "^mmc[0-9]+$" > > - pattern: "^cpu[0-9]*$" > > + - pattern: "^hci[0-9]+-power$" > > + # LED is triggered by Bluetooth activity > > + - pattern: "^mmc[0-9]+$" > > + # LED is triggered by SD/MMC activity > > + - pattern: "^phy[0-9]+tx$" > > + # LED is triggered by WLAN activity > > > > led-pattern: > > description: | > > Best regards, > Krzysztof >
On Fri, Jan 20, 2023 at 10:42 PM Luiz Augusto von Dentz <luiz.dentz@gmail.com> wrote: > On Fri, Jan 20, 2023 at 8:42 AM Krzysztof Kozlowski > <krzysztof.kozlowski@linaro.org> wrote: > > > > On 09/11/2022 15:46, Geert Uytterhoeven wrote: > > > Add the missing trigger patterns for Bluetooth and WLAN activity, which > > > are already in active use. > > > > > > While at it, move the mmc pattern comment where it belongs, and restore > > > alphabetical sort order. > > > > > > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> > > > --- > > > arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2.dtb: leds: bt_active_led:linux,default-trigger: 'oneOf' conditional failed, one must be fixed: > > > 'hci0-power' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern'] > > > 'hci0-power' does not match '^mmc[0-9]+$' > > > From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml > > > arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2.dtb: leds: wlan_active_led:linux,default-trigger: 'oneOf' conditional failed, one must be fixed: > > > 'phy0tx' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern'] > > > 'phy0tx' does not match '^mmc[0-9]+$' > > > From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml > > > > This patch got lost... Rob, Lee or Pavel, can you pick it up? > > > > It's with Rob's approval: > > https://lore.kernel.org/all/166861772609.231295.14812410099261417331.robh@kernel.org/ > > If it is going to be applied via bluetooth-next make sure to resend it > since last time our CI was not able to apply it thus why we didn't > apply it in the first place. Resent as v2, https://lore.kernel.org/r/0d0de1bc949d24e08174205c13c0b59bd73c1ea8.1674384302.git.geert+renesas@glider.be Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
Hi Luiz, On Sun, Jan 22, 2023 at 11:48 AM Geert Uytterhoeven <geert@linux-m68k.org> wrote: > On Fri, Jan 20, 2023 at 10:42 PM Luiz Augusto von Dentz > <luiz.dentz@gmail.com> wrote: > > On Fri, Jan 20, 2023 at 8:42 AM Krzysztof Kozlowski > > <krzysztof.kozlowski@linaro.org> wrote: > > > On 09/11/2022 15:46, Geert Uytterhoeven wrote: > > > > Add the missing trigger patterns for Bluetooth and WLAN activity, which > > > > are already in active use. > > > > > > > > While at it, move the mmc pattern comment where it belongs, and restore > > > > alphabetical sort order. > > > > > > > > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> > > > > --- > > > > arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2.dtb: leds: bt_active_led:linux,default-trigger: 'oneOf' conditional failed, one must be fixed: > > > > 'hci0-power' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern'] > > > > 'hci0-power' does not match '^mmc[0-9]+$' > > > > From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml > > > > arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2.dtb: leds: wlan_active_led:linux,default-trigger: 'oneOf' conditional failed, one must be fixed: > > > > 'phy0tx' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern'] > > > > 'phy0tx' does not match '^mmc[0-9]+$' > > > > From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml > > > > > > This patch got lost... Rob, Lee or Pavel, can you pick it up? > > > > > > It's with Rob's approval: > > > https://lore.kernel.org/all/166861772609.231295.14812410099261417331.robh@kernel.org/ > > > > If it is going to be applied via bluetooth-next make sure to resend it > > since last time our CI was not able to apply it thus why we didn't > > apply it in the first place. > > Resent as v2, https://lore.kernel.org/r/0d0de1bc949d24e08174205c13c0b59bd73c1ea8.1674384302.git.geert+renesas@glider.be According to your CI, it still does not apply. However, there are no changes to Documentation/devicetree/bindings/leds/leds-gpio.yaml between v6.2-rc1 and next-20230120. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml index f5c57a580078ea23..d34bb58c00371402 100644 --- a/Documentation/devicetree/bindings/leds/common.yaml +++ b/Documentation/devicetree/bindings/leds/common.yaml @@ -98,9 +98,13 @@ properties: # LED alters the brightness for the specified duration with one software # timer (requires "led-pattern" property) - pattern - # LED is triggered by SD/MMC activity - - pattern: "^mmc[0-9]+$" - pattern: "^cpu[0-9]*$" + - pattern: "^hci[0-9]+-power$" + # LED is triggered by Bluetooth activity + - pattern: "^mmc[0-9]+$" + # LED is triggered by SD/MMC activity + - pattern: "^phy[0-9]+tx$" + # LED is triggered by WLAN activity led-pattern: description: |
Add the missing trigger patterns for Bluetooth and WLAN activity, which are already in active use. While at it, move the mmc pattern comment where it belongs, and restore alphabetical sort order. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2.dtb: leds: bt_active_led:linux,default-trigger: 'oneOf' conditional failed, one must be fixed: 'hci0-power' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern'] 'hci0-power' does not match '^mmc[0-9]+$' From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2.dtb: leds: wlan_active_led:linux,default-trigger: 'oneOf' conditional failed, one must be fixed: 'phy0tx' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'ide-disk', 'timer', 'pattern'] 'phy0tx' does not match '^mmc[0-9]+$' From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml --- Documentation/devicetree/bindings/leds/common.yaml | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)