diff mbox series

serial: exar: Add support for Sealevel 7xxxC serial cards

Message ID alpine.DEB.2.21.2301161242150.19090@tstest-VirtualBox
State Superseded
Headers show
Series serial: exar: Add support for Sealevel 7xxxC serial cards | expand

Commit Message

Matthew Howell Jan. 16, 2023, 8:49 p.m. UTC 
Add support for Sealevel 7xxxC serial cards.

Signed-off-by: Matthew Howell <matthew.howell@sealevel.com>

This patch:
* Adds IDs to recognize 7xxxC cards from Sealevel Systems.
* Updates exar_pci_probe() to set nr_ports to last two bytes of primary
dev ID for these cards.

Let me know if I need to make any changes.


@@ -864,6 +872,12 @@ static const struct pci_device_id exar_pci_tbl[] = {
 	EXAR_DEVICE(COMMTECH, 4224PCI335, pbn_fastcom335_4),
 	EXAR_DEVICE(COMMTECH, 2324PCI335, pbn_fastcom335_4),
 	EXAR_DEVICE(COMMTECH, 2328PCI335, pbn_fastcom335_8),
+
+	EXAR_DEVICE(SEALEVEL, 710xC, pbn_exar_XR17V35x),
+	EXAR_DEVICE(SEALEVEL, 720xC, pbn_exar_XR17V35x),
+	EXAR_DEVICE(SEALEVEL, 740xC, pbn_exar_XR17V35x),
+	EXAR_DEVICE(SEALEVEL, 780xC, pbn_exar_XR17V35x),
+	EXAR_DEVICE(SEALEVEL, 716xC, pbn_exar_XR17V35x),
 	{ 0, }
 };
 MODULE_DEVICE_TABLE(pci, exar_pci_tbl);

Comments

Greg Kroah-Hartman Jan. 19, 2023, 2:57 p.m. UTC | #1 
On Mon, Jan 16, 2023 at 03:49:08PM -0500, Matthew Howell wrote:
> Add support for Sealevel 7xxxC serial cards.
> 
> Signed-off-by: Matthew Howell <matthew.howell@sealevel.com>
> 
> This patch:
> * Adds IDs to recognize 7xxxC cards from Sealevel Systems.
> * Updates exar_pci_probe() to set nr_ports to last two bytes of primary
> dev ID for these cards.

This information needs to be above the signed-off-by line in the
changelog text.

Can you resend this as a v2 patch?

thanks,

greg k-h
diff mbox series

Patch

diff --git a/drivers/tty/serial/8250/8250_exar.c
b/drivers/tty/serial/8250/8250_exar.c
index 314a05e00..64770c62b 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -43,6 +43,12 @@ 
 #define PCI_DEVICE_ID_EXAR_XR17V4358		0x4358
 #define PCI_DEVICE_ID_EXAR_XR17V8358		0x8358

+#define PCI_DEVICE_ID_SEALEVEL_710xC		0x1001
+#define PCI_DEVICE_ID_SEALEVEL_720xC		0x1002
+#define PCI_DEVICE_ID_SEALEVEL_740xC		0x1004
+#define PCI_DEVICE_ID_SEALEVEL_780xC		0x1008
+#define PCI_DEVICE_ID_SEALEVEL_716xC		0x1010
+
 #define UART_EXAR_INT0		0x80
 #define UART_EXAR_8XMODE	0x88	/* 8X sampling rate select */
 #define UART_EXAR_SLEEP	0x8b	/* Sleep mode */
@@ -638,6 +644,8 @@  exar_pci_probe(struct pci_dev *pcidev, const struct
pci_device_id *ent)
 		nr_ports = BIT(((pcidev->device & 0x38) >> 3) - 1);
 	else if (board->num_ports)
 		nr_ports = board->num_ports;
+	else if (pcidev->vendor == PCI_VENDOR_ID_SEALEVEL)
+		nr_ports = pcidev->device & 0xff;
 	else
 		nr_ports = pcidev->device & 0x0f;