diff mbox series

[v5,1/6] riscv: asm: alternative-macros: Introduce ALTERNATIVE_3() macro

Message ID 20221212115505.36770-2-prabhakar.mahadev-lad.rj@bp.renesas.com
State New
Headers show
Series AX45MP: Add support to non-coherent DMA | expand

Commit Message

Lad, Prabhakar Dec. 12, 2022, 11:55 a.m. UTC
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Introduce ALTERNATIVE_3() macro.

A vendor wants to replace an old_content, but another vendor has used
ALTERNATIVE_2() to patch its customized content at the same location.
In this case, this vendor can use macro ALTERNATIVE_3() and then replace
ALTERNATIVE_2() with ALTERNATIVE_3() to append its customized content.

While at it update comment above ALTERNATIVE_2() macro and make it generic
so that the comment holds good for any new addition of ALTERNATIVE_X()
macros.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
v4->v5
* Rebased the patch on top of Andrew's series (now in Palmers for next-branch)
* Updated comment for ALTERNATIVE_x() as suggested by Heiko

RFC v3 -> v4
* New patch
---
 arch/riscv/include/asm/alternative-macros.h | 46 ++++++++++++++++++---
 1 file changed, 41 insertions(+), 5 deletions(-)

Comments

Geert Uytterhoeven Dec. 13, 2022, 5:21 p.m. UTC | #1
Hi Prabhakar,

On Mon, Dec 12, 2022 at 12:58 PM Prabhakar <prabhakar.csengg@gmail.com> wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
>
> Introduce ALTERNATIVE_3() macro.
>
> A vendor wants to replace an old_content, but another vendor has used
> ALTERNATIVE_2() to patch its customized content at the same location.
> In this case, this vendor can use macro ALTERNATIVE_3() and then replace
> ALTERNATIVE_2() with ALTERNATIVE_3() to append its customized content.
>
> While at it update comment above ALTERNATIVE_2() macro and make it generic
> so that the comment holds good for any new addition of ALTERNATIVE_X()
> macros.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
> v4->v5
> * Rebased the patch on top of Andrew's series (now in Palmers for next-branch)
> * Updated comment for ALTERNATIVE_x() as suggested by Heiko

Thanks for the update!

> --- a/arch/riscv/include/asm/alternative-macros.h
> +++ b/arch/riscv/include/asm/alternative-macros.h
> @@ -50,8 +50,17 @@
>         ALT_NEW_CONTENT \vendor_id_2, \errata_id_2, \enable_2, \new_c_2
>  .endm
>
> +.macro ALTERNATIVE_CFG_3 old_c, new_c_1, vendor_id_1, errata_id_1, enable_1,   \
> +                               new_c_2, vendor_id_2, errata_id_2, enable_2,    \
> +                               new_c_3, vendor_id_3, errata_id_3, enable_3
> +       ALTERNATIVE_CFG_2 \old_c, \new_c_1, \vendor_id_1, \errata_id_1, \enable_1,      \
> +                                 \new_c_2, \vendor_id_2, \errata_id_2, \enable_2
> +       ALT_NEW_CONTENT \vendor_id_3, \errata_id_3, \enable_3, \new_c_3
> +.endm
> +
>  #define __ALTERNATIVE_CFG(...)         ALTERNATIVE_CFG __VA_ARGS__
>  #define __ALTERNATIVE_CFG_2(...)       ALTERNATIVE_CFG_2 __VA_ARGS__
> +#define __ALTERNATIVE_CFG_3(...)       ALTERNATIVE_CFG_3 __VA_ARGS__
>
>  #else /* !__ASSEMBLY__ */
>
> @@ -98,6 +107,13 @@
>         __ALTERNATIVE_CFG(old_c, new_c_1, vendor_id_1, errata_id_1, enable_1)   \
>         ALT_NEW_CONTENT(vendor_id_2, errata_id_2, enable_2, new_c_2)
>
> +#define __ALTERNATIVE_CFG_3(old_c, new_c_1, vendor_id_1, errata_id_1, enable_1,        \
> +                                  new_c_2, vendor_id_2, errata_id_2, enable_2, \
> +                                  new_c_3, vendor_id_3, errata_id_3, enable_3) \
> +       __ALTERNATIVE_CFG_2(old_c, new_c_1, vendor_id_1, errata_id_1, enable_1, \
> +                                   new_c_2, vendor_id_2, errata_id_2, enable_2)        \
> +       ALT_NEW_CONTENT(vendor_id_3, errata_id_3, enable_3, new_c_3)
> +
>  #endif /* __ASSEMBLY__ */
>
>  #define _ALTERNATIVE_CFG(old_c, new_c, vendor_id, errata_id, CONFIG_k) \
> @@ -108,6 +124,13 @@
>         __ALTERNATIVE_CFG_2(old_c, new_c_1, vendor_id_1, errata_id_1, IS_ENABLED(CONFIG_k_1),   \
>                                    new_c_2, vendor_id_2, errata_id_2, IS_ENABLED(CONFIG_k_2))
>
> +#define _ALTERNATIVE_CFG_3(old_c, new_c_1, vendor_id_1, errata_id_1, CONFIG_k_1,               \
> +                                 new_c_2, vendor_id_2, errata_id_2, CONFIG_k_2,                \
> +                                 new_c_3, vendor_id_3, errata_id_3, CONFIG_k_3)                \
> +       __ALTERNATIVE_CFG_3(old_c, new_c_1, vendor_id_1, errata_id_1, IS_ENABLED(CONFIG_k_1),   \
> +                                  new_c_2, vendor_id_2, errata_id_2, IS_ENABLED(CONFIG_k_2),   \
> +                                  new_c_3, vendor_id_3, errata_id_3, IS_ENABLED(CONFIG_k_3))
> +
>  #else /* CONFIG_RISCV_ALTERNATIVE */

To avoid breaking the build for K210 (and VexRiscv), you need to provide
_ALTERNATIVE_CFG_3() for the !CONFIG_RISCV_ALTERNATIVE case, too:

@@ -144,6 +144,9 @@
 #define _ALTERNATIVE_CFG_2(old_c, ...) \
        ALTERNATIVE_CFG old_c

+#define _ALTERNATIVE_CFG_3(old_c, ...) \
+       ALTERNATIVE_CFG old_c
+
 #else /* !__ASSEMBLY__ */

 #define __ALTERNATIVE_CFG(old_c)       \
@@ -155,6 +158,9 @@
 #define _ALTERNATIVE_CFG_2(old_c, ...) \
        __ALTERNATIVE_CFG(old_c)

+#define _ALTERNATIVE_CFG_3(old_c, ...) \
+       __ALTERNATIVE_CFG(old_c)
+
 #endif /* __ASSEMBLY__ */
 #endif /* CONFIG_RISCV_ALTERNATIVE */

Else it fails (on riscv/for-next) with:

arch/riscv/mm/pmem.c: In function ‘arch_wb_cache_pmem’:
arch/riscv/include/asm/alternative-macros.h:198:8: error: expected
string literal before ‘_ALTERNATIVE_CFG_3’
  198 |        _ALTERNATIVE_CFG_3(old_content, new_content_1,
vendor_id_1, errata_id_1, CONFIG_k_1, \
      |        ^~~~~~~~~~~~~~~~~~
arch/riscv/include/asm/errata_list.h:128:14: note: in expansion of
macro ‘ALTERNATIVE_3’
  128 | asm volatile(ALTERNATIVE_3(      \
      |              ^~~~~~~~~~~~~
arch/riscv/mm/pmem.c:13:2: note: in expansion of macro ‘ALT_CMO_OP’
   13 |  ALT_CMO_OP(clean, addr, size, riscv_cbom_block_size, 0, 0);
      |  ^~~~~~~~~~

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
Conor Dooley Dec. 17, 2022, 9:41 p.m. UTC | #2
On Mon, Dec 12, 2022 at 11:55:00AM +0000, Prabhakar wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> 
> Introduce ALTERNATIVE_3() macro.
> 
> A vendor wants to replace an old_content, but another vendor has used
> ALTERNATIVE_2() to patch its customized content at the same location.
> In this case, this vendor can use macro ALTERNATIVE_3() and then replace
> ALTERNATIVE_2() with ALTERNATIVE_3() to append its customized content.
> 
> While at it update comment above ALTERNATIVE_2() macro and make it generic
> so that the comment holds good for any new addition of ALTERNATIVE_X()
> macros.
> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
> v4->v5
> * Rebased the patch on top of Andrew's series (now in Palmers for next-branch)
> * Updated comment for ALTERNATIVE_x() as suggested by Heiko
> 
> RFC v3 -> v4
> * New patch
> ---
>  arch/riscv/include/asm/alternative-macros.h | 46 ++++++++++++++++++---
>  1 file changed, 41 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/riscv/include/asm/alternative-macros.h b/arch/riscv/include/asm/alternative-macros.h
> index 7226e2462584..a5b4691520da 100644
> --- a/arch/riscv/include/asm/alternative-macros.h
> +++ b/arch/riscv/include/asm/alternative-macros.h
> @@ -50,8 +50,17 @@
>  	ALT_NEW_CONTENT \vendor_id_2, \errata_id_2, \enable_2, \new_c_2
>  .endm
>  
> +.macro ALTERNATIVE_CFG_3 old_c, new_c_1, vendor_id_1, errata_id_1, enable_1,	\
> +				new_c_2, vendor_id_2, errata_id_2, enable_2,	\
> +				new_c_3, vendor_id_3, errata_id_3, enable_3
> +       ALTERNATIVE_CFG_2 \old_c, \new_c_1, \vendor_id_1, \errata_id_1, \enable_1,	\
> +                                 \new_c_2, \vendor_id_2, \errata_id_2, \enable_2
> +       ALT_NEW_CONTENT \vendor_id_3, \errata_id_3, \enable_3, \new_c_3
> +.endm
> +
>  #define __ALTERNATIVE_CFG(...)		ALTERNATIVE_CFG __VA_ARGS__
>  #define __ALTERNATIVE_CFG_2(...)	ALTERNATIVE_CFG_2 __VA_ARGS__
> +#define __ALTERNATIVE_CFG_3(...)	ALTERNATIVE_CFG_3 __VA_ARGS__
>  
>  #else /* !__ASSEMBLY__ */
>  
> @@ -98,6 +107,13 @@
>  	__ALTERNATIVE_CFG(old_c, new_c_1, vendor_id_1, errata_id_1, enable_1)	\
>  	ALT_NEW_CONTENT(vendor_id_2, errata_id_2, enable_2, new_c_2)
>  
> +#define __ALTERNATIVE_CFG_3(old_c, new_c_1, vendor_id_1, errata_id_1, enable_1,	\
> +				   new_c_2, vendor_id_2, errata_id_2, enable_2,	\
> +				   new_c_3, vendor_id_3, errata_id_3, enable_3)	\
> +	__ALTERNATIVE_CFG_2(old_c, new_c_1, vendor_id_1, errata_id_1, enable_1,	\
> +                                   new_c_2, vendor_id_2, errata_id_2, enable_2)	\
> +	ALT_NEW_CONTENT(vendor_id_3, errata_id_3, enable_3, new_c_3)
> +
>  #endif /* __ASSEMBLY__ */
>  
>  #define _ALTERNATIVE_CFG(old_c, new_c, vendor_id, errata_id, CONFIG_k)	\
> @@ -108,6 +124,13 @@
>  	__ALTERNATIVE_CFG_2(old_c, new_c_1, vendor_id_1, errata_id_1, IS_ENABLED(CONFIG_k_1),	\
>  				   new_c_2, vendor_id_2, errata_id_2, IS_ENABLED(CONFIG_k_2))
>  
> +#define _ALTERNATIVE_CFG_3(old_c, new_c_1, vendor_id_1, errata_id_1, CONFIG_k_1,		\
> +				  new_c_2, vendor_id_2, errata_id_2, CONFIG_k_2,		\
> +				  new_c_3, vendor_id_3, errata_id_3, CONFIG_k_3)		\
> +	__ALTERNATIVE_CFG_3(old_c, new_c_1, vendor_id_1, errata_id_1, IS_ENABLED(CONFIG_k_1),	\
> +				   new_c_2, vendor_id_2, errata_id_2, IS_ENABLED(CONFIG_k_2),	\
> +				   new_c_3, vendor_id_3, errata_id_3, IS_ENABLED(CONFIG_k_3))
> +
>  #else /* CONFIG_RISCV_ALTERNATIVE */
>  #ifdef __ASSEMBLY__
>  
> @@ -152,15 +175,28 @@
>  	_ALTERNATIVE_CFG(old_content, new_content, vendor_id, errata_id, CONFIG_k)
>  
>  /*
> - * A vendor wants to replace an old_content, but another vendor has used
> - * ALTERNATIVE() to patch its customized content at the same location. In
> - * this case, this vendor can create a new macro ALTERNATIVE_2() based
> - * on the following sample code and then replace ALTERNATIVE() with
> - * ALTERNATIVE_2() to append its customized content.
> + * ALTERNATIVE_x macros allow providing multiple replacement options
> + * for an ALTERNATIVE code section. This is helpful if multiple
> + * implementation variants for the same functionality exist for
> + * different cpu cores.

I think this last sentence should be:
"This is helpful if multiple implementation variants exist for the same
functionality."
I don't think CPU cores is the right level of "granularity".

> + *
> + * Usage:
> + *   ALTERNATIVE_x(old_content,
> + *      new_content1, vendor_id1, errata_id1, CONFIG_k1,
> + *      new_content2, vendor_id2, errata_id2, CONFIG_k2,
> + *      ...
> + *      new_contentx, vendor_idx, errata_idx, CONFIG_kx)
>   */
>  #define ALTERNATIVE_2(old_content, new_content_1, vendor_id_1, errata_id_1, CONFIG_k_1,		\
>  				   new_content_2, vendor_id_2, errata_id_2, CONFIG_k_2)		\
>  	_ALTERNATIVE_CFG_2(old_content, new_content_1, vendor_id_1, errata_id_1, CONFIG_k_1,	\
>  					new_content_2, vendor_id_2, errata_id_2, CONFIG_k_2)
>  
> +#define ALTERNATIVE_3(old_content, new_content_1, vendor_id_1, errata_id_1, CONFIG_k_1,		\
> +				   new_content_2, vendor_id_2, errata_id_2, CONFIG_k_2,		\
> +				   new_content_3, vendor_id_3, errata_id_3, CONFIG_k_3)		\
> +       _ALTERNATIVE_CFG_3(old_content, new_content_1, vendor_id_1, errata_id_1, CONFIG_k_1,	\
> +                                       new_content_2, vendor_id_2, errata_id_2, CONFIG_k_2,	\
> +                                       new_content_3, vendor_id_3, errata_id_3, CONFIG_k_3)

btw, why is this indented with spaces when the line above it is indented
with tabs? (At least, that is how it appears in mutt).

With those minor bits & the suggested fixes from Drew/Geert:
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>

Thanks,
Conor.

> +
>  #endif
> -- 
> 2.25.1
>
diff mbox series

Patch

diff --git a/arch/riscv/include/asm/alternative-macros.h b/arch/riscv/include/asm/alternative-macros.h
index 7226e2462584..a5b4691520da 100644
--- a/arch/riscv/include/asm/alternative-macros.h
+++ b/arch/riscv/include/asm/alternative-macros.h
@@ -50,8 +50,17 @@ 
 	ALT_NEW_CONTENT \vendor_id_2, \errata_id_2, \enable_2, \new_c_2
 .endm
 
+.macro ALTERNATIVE_CFG_3 old_c, new_c_1, vendor_id_1, errata_id_1, enable_1,	\
+				new_c_2, vendor_id_2, errata_id_2, enable_2,	\
+				new_c_3, vendor_id_3, errata_id_3, enable_3
+       ALTERNATIVE_CFG_2 \old_c, \new_c_1, \vendor_id_1, \errata_id_1, \enable_1,	\
+                                 \new_c_2, \vendor_id_2, \errata_id_2, \enable_2
+       ALT_NEW_CONTENT \vendor_id_3, \errata_id_3, \enable_3, \new_c_3
+.endm
+
 #define __ALTERNATIVE_CFG(...)		ALTERNATIVE_CFG __VA_ARGS__
 #define __ALTERNATIVE_CFG_2(...)	ALTERNATIVE_CFG_2 __VA_ARGS__
+#define __ALTERNATIVE_CFG_3(...)	ALTERNATIVE_CFG_3 __VA_ARGS__
 
 #else /* !__ASSEMBLY__ */
 
@@ -98,6 +107,13 @@ 
 	__ALTERNATIVE_CFG(old_c, new_c_1, vendor_id_1, errata_id_1, enable_1)	\
 	ALT_NEW_CONTENT(vendor_id_2, errata_id_2, enable_2, new_c_2)
 
+#define __ALTERNATIVE_CFG_3(old_c, new_c_1, vendor_id_1, errata_id_1, enable_1,	\
+				   new_c_2, vendor_id_2, errata_id_2, enable_2,	\
+				   new_c_3, vendor_id_3, errata_id_3, enable_3)	\
+	__ALTERNATIVE_CFG_2(old_c, new_c_1, vendor_id_1, errata_id_1, enable_1,	\
+                                   new_c_2, vendor_id_2, errata_id_2, enable_2)	\
+	ALT_NEW_CONTENT(vendor_id_3, errata_id_3, enable_3, new_c_3)
+
 #endif /* __ASSEMBLY__ */
 
 #define _ALTERNATIVE_CFG(old_c, new_c, vendor_id, errata_id, CONFIG_k)	\
@@ -108,6 +124,13 @@ 
 	__ALTERNATIVE_CFG_2(old_c, new_c_1, vendor_id_1, errata_id_1, IS_ENABLED(CONFIG_k_1),	\
 				   new_c_2, vendor_id_2, errata_id_2, IS_ENABLED(CONFIG_k_2))
 
+#define _ALTERNATIVE_CFG_3(old_c, new_c_1, vendor_id_1, errata_id_1, CONFIG_k_1,		\
+				  new_c_2, vendor_id_2, errata_id_2, CONFIG_k_2,		\
+				  new_c_3, vendor_id_3, errata_id_3, CONFIG_k_3)		\
+	__ALTERNATIVE_CFG_3(old_c, new_c_1, vendor_id_1, errata_id_1, IS_ENABLED(CONFIG_k_1),	\
+				   new_c_2, vendor_id_2, errata_id_2, IS_ENABLED(CONFIG_k_2),	\
+				   new_c_3, vendor_id_3, errata_id_3, IS_ENABLED(CONFIG_k_3))
+
 #else /* CONFIG_RISCV_ALTERNATIVE */
 #ifdef __ASSEMBLY__
 
@@ -152,15 +175,28 @@ 
 	_ALTERNATIVE_CFG(old_content, new_content, vendor_id, errata_id, CONFIG_k)
 
 /*
- * A vendor wants to replace an old_content, but another vendor has used
- * ALTERNATIVE() to patch its customized content at the same location. In
- * this case, this vendor can create a new macro ALTERNATIVE_2() based
- * on the following sample code and then replace ALTERNATIVE() with
- * ALTERNATIVE_2() to append its customized content.
+ * ALTERNATIVE_x macros allow providing multiple replacement options
+ * for an ALTERNATIVE code section. This is helpful if multiple
+ * implementation variants for the same functionality exist for
+ * different cpu cores.
+ *
+ * Usage:
+ *   ALTERNATIVE_x(old_content,
+ *      new_content1, vendor_id1, errata_id1, CONFIG_k1,
+ *      new_content2, vendor_id2, errata_id2, CONFIG_k2,
+ *      ...
+ *      new_contentx, vendor_idx, errata_idx, CONFIG_kx)
  */
 #define ALTERNATIVE_2(old_content, new_content_1, vendor_id_1, errata_id_1, CONFIG_k_1,		\
 				   new_content_2, vendor_id_2, errata_id_2, CONFIG_k_2)		\
 	_ALTERNATIVE_CFG_2(old_content, new_content_1, vendor_id_1, errata_id_1, CONFIG_k_1,	\
 					new_content_2, vendor_id_2, errata_id_2, CONFIG_k_2)
 
+#define ALTERNATIVE_3(old_content, new_content_1, vendor_id_1, errata_id_1, CONFIG_k_1,		\
+				   new_content_2, vendor_id_2, errata_id_2, CONFIG_k_2,		\
+				   new_content_3, vendor_id_3, errata_id_3, CONFIG_k_3)		\
+       _ALTERNATIVE_CFG_3(old_content, new_content_1, vendor_id_1, errata_id_1, CONFIG_k_1,	\
+                                       new_content_2, vendor_id_2, errata_id_2, CONFIG_k_2,	\
+                                       new_content_3, vendor_id_3, errata_id_3, CONFIG_k_3)
+
 #endif