| Message ID | 20221214232049.703484-6-marijn.suijten@somainline.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [1/6] arm64: dts: qcom: pmi8950: Add USB vbus and id sensing nodes | expand |
On 2022-12-15 14:20:30, Konrad Dybcio wrote: > > > On 15.12.2022 00:20, Marijn Suijten wrote: > > Add the pinctrl states for SDC2 and use them on sdhc_2 to support SD > > Cards on the currently mainlined Sony Loire platform. > > > > Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> > > --- > > .../qcom/msm8956-sony-xperia-loire-kugo.dts | 6 +++ > > .../dts/qcom/msm8956-sony-xperia-loire.dtsi | 6 +++ > > arch/arm64/boot/dts/qcom/msm8976.dtsi | 45 +++++++++++++++++++ > > 3 files changed, 57 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-kugo.dts b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-kugo.dts > > index 3fb8e23e4330..9178943e2ee1 100644 > > --- a/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-kugo.dts > > +++ b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-kugo.dts > > @@ -33,3 +33,9 @@ &pm8950_l1 { > > regulator-min-microvolt = <1100000>; > > regulator-max-microvolt = <1300000>; > > }; > > + > > +&sdc2_on_state { > > + data-pins { > > + drive-strength = <8>; > > + }; > > +}; > You can add a label to the data-pins subnode. I prefer this simplicity as the sdc2_*_state labels are already available and will be extended later with sd-cd-pins regardless. I'll change this if others share the same opinion. However, you're also right this way of writing makes it unclear to the reader whether data-pins already exists or has to exist; that would not be the case when a label is explicitly assigned to data-pins. - Marijn
diff --git a/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-kugo.dts b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-kugo.dts index 3fb8e23e4330..9178943e2ee1 100644 --- a/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-kugo.dts +++ b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-kugo.dts @@ -33,3 +33,9 @@ &pm8950_l1 { regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1300000>; }; + +&sdc2_on_state { + data-pins { + drive-strength = <8>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi index 700583a56a0e..2253fb05f1c9 100644 --- a/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi @@ -264,6 +264,12 @@ &sdhc_1 { status = "okay"; }; +&sdc2_on_state { + clk-pins { + drive-strength = <10>; + }; +}; + &sdhc_2 { bus-width = <4>; cd-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm64/boot/dts/qcom/msm8976.dtsi b/arch/arm64/boot/dts/qcom/msm8976.dtsi index 7d4c7548882c..f3371eaa2940 100644 --- a/arch/arm64/boot/dts/qcom/msm8976.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8976.dtsi @@ -558,6 +558,46 @@ rclk-pins { }; }; + sdc2_off_state: sdc2-off-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + sdc2_on_state: sdc2-on-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <10>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + spi1_default: spi0-default-state { spi-pins { pins = "gpio0", "gpio1", "gpio3"; @@ -751,6 +791,11 @@ sdhc_2: mmc@7864000 { <&gcc GCC_SDCC2_APPS_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>; clock-names = "iface", "core", "xo"; + + pinctrl-0 = <&sdc2_on_state>; + pinctrl-1 = <&sdc2_off_state>; + pinctrl-names = "default", "sleep"; + status = "disabled"; };
Add the pinctrl states for SDC2 and use them on sdhc_2 to support SD Cards on the currently mainlined Sony Loire platform. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> --- .../qcom/msm8956-sony-xperia-loire-kugo.dts | 6 +++ .../dts/qcom/msm8956-sony-xperia-loire.dtsi | 6 +++ arch/arm64/boot/dts/qcom/msm8976.dtsi | 45 +++++++++++++++++++ 3 files changed, 57 insertions(+)