[v2] USB: gadget: dummy_hcd: switch char * to u8 *

The function handle_control_request() casts the urb buffer to a char *,
and then treats it like a unsigned char buffer when assigning data to
it.  On some architectures, "char" is really signed, so let's just
properly set this pointer to a u8 to take away any potential problems as
that's what is really wanted here.

Use put_unaligned_le16() to copy the full 16bits into the buffer,
it's not a problem just yet as only 7 bits are being used here, but this
protects us when/if the USB spec changes in the future to define more of
these bits.

Cc: Felipe Balbi <balbi@kernel.org>
Cc: Jakob Koschel <jakobkoschel@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
v2: - use put_unaligned_le16() on Linus's recommendation as a simpler and
      more obvious way to describe the data being copied here.
    - update device: comment based on Alan's review

 drivers/usb/gadget/udc/dummy_hcd.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

On Wed, Nov 09, 2022 at 10:03:52AM -0500, Alan Stern wrote:
> On Wed, Nov 09, 2022 at 09:44:50AM +0100, Greg Kroah-Hartman wrote:
> > The function handle_control_request() casts the urb buffer to a char *,
> > and then treats it like a unsigned char buffer when assigning data to
> > it.  On some architectures, "char" is really signed, so let's just
> > properly set this pointer to a u8 to take away any potential problems as
> > that's what is really wanted here.
> > 
> > Use put_unaligned_le16() to copy the full 16bits into the buffer,
> > it's not a problem just yet as only 7 bits are being used here, but this
> > protects us when/if the USB spec changes in the future to define more of
> > these bits.
> > 
> > Cc: Felipe Balbi <balbi@kernel.org>
> > Cc: Jakob Koschel <jakobkoschel@gmail.com>
> > Cc: Randy Dunlap <rdunlap@infradead.org>
> > Cc: Ira Weiny <ira.weiny@intel.com>
> > Cc: Alan Stern <stern@rowland.harvard.edu>
> > Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
> > Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > ---
> > v2: - use put_unaligned_le16() on Linus's recommendation as a simpler and
> >       more obvious way to describe the data being copied here.
> >     - update device: comment based on Alan's review
> > 
> >  drivers/usb/gadget/udc/dummy_hcd.c | 13 ++++++-------
> >  1 file changed, 6 insertions(+), 7 deletions(-)
> > 
> > diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c
> > index 899ac9f9c279..7c59c20c8623 100644
> > --- a/drivers/usb/gadget/udc/dummy_hcd.c
> > +++ b/drivers/usb/gadget/udc/dummy_hcd.c
> > @@ -1740,13 +1740,13 @@ static int handle_control_request(struct dummy_hcd *dum_hcd, struct urb *urb,
> >  		if (setup->bRequestType == Dev_InRequest
> >  				|| setup->bRequestType == Intf_InRequest
> >  				|| setup->bRequestType == Ep_InRequest) {
> > -			char *buf;
> > +			u8 *buf;
> >  			/*
> > -			 * device: remote wakeup, selfpowered
> > +			 * device: remote wakeup, selfpowered, LTM, U1, or U2
> >  			 * interface: nothing
> >  			 * endpoint: halt
> >  			 */
> > -			buf = (char *)urb->transfer_buffer;
> > +			buf = urb->transfer_buffer;
> >  			if (urb->transfer_buffer_length > 0) {
> >  				if (setup->bRequestType == Ep_InRequest) {
> >  					ep2 = find_endpoint(dum, w_index);
> > @@ -1755,10 +1755,9 @@ static int handle_control_request(struct dummy_hcd *dum_hcd, struct urb *urb,
> >  						break;
> >  					}
> >  					buf[0] = ep2->halted;
> > -				} else if (setup->bRequestType ==
> > -					   Dev_InRequest) {
> > -					buf[0] = (u8)dum->devstatus;
> > -				} else
> > +				} else if (setup->bRequestType == Dev_InRequest)
> > +					put_unaligned_le16(dum->devstatus, buf);
> 
> This is tempting but wrong.  At this point we haven't checked how big 
> the transfer_buffer is; if it is only one byte long then this call will 
> overflow the buffer.  Notice the "if" statement three lines below.

Ick, good catch.  I'll redo this again...

thanks,

greg k-h