diff mbox series

[v2] bus: mhi: host: pci_generic: Add macro for some VIDs

Message ID 20221107084826.8888-1-slark_xiao@163.com
State Accepted
Commit 5562c6a9657e1bffd4d66df841db142c596f411c
Headers show
Series [v2] bus: mhi: host: pci_generic: Add macro for some VIDs | expand

Commit Message

Slark Xiao Nov. 7, 2022, 8:48 a.m. UTC
To make code neat and for convenience purpose, use macro for
some VIDs. These macros are supposed to be added to pci_ids.h.
But until the macros are used in multiple places, it is not
recommended. So adding it locally for now.

Signed-off-by: Slark Xiao <slark_xiao@163.com>
---
v2: Update description and format issue
---
 drivers/bus/mhi/host/pci_generic.c | 18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

Comments

Slark Xiao Nov. 10, 2022, 11:14 a.m. UTC | #1
At 2022-11-07 20:07:52, "Greg KH" <gregkh@linuxfoundation.org> wrote:
>On Mon, Nov 07, 2022 at 06:26:16PM +0800, Slark Xiao wrote:
>Why all the blank lines?

163 mail automatically add it , and I forget remove it.

>
>> At 2022-11-07 17:53:57, "Greg KH" <gregkh@linuxfoundation.org> wrote:
>> >On Mon, Nov 07, 2022 at 05:30:56PM +0800, Slark Xiao wrote:
>> >As I said, this is just a define, not a macro at all.
>> >
>> >> And could you give your comments in previous patch, not the 'final' one?
>> >
>> >I do not understand, what previous patrch?  What "final" one?  What is
>> >the "latest" patch?
>> previous patch:
>> https://lore.kernel.org/lkml/20221027115123.5326-1-slark_xiao@163.com/
>> https://lore.kernel.org/lkml/20221028023711.4196-1-slark_xiao@163.com/
>> https://lore.kernel.org/lkml/20221102024437.15248-1-slark_xiao@163.com/
>> 
>> 'final' patch:
>> https://lore.kernel.org/lkml/20221107084826.8888-1-slark_xiao@163.com/
>> https://lore.kernel.org/lkml/20221101015858.6777-1-slark_xiao@163.com/
>
>That's 2 different versions, with a total of 3.
>
>> 
>> The 'final' patch was committed according to the advice of the feature
>> maintainer. 
>> >
>> >> In another pci_ids patch, you break it in v3 and break it here again in v2.
>> >
>> >I broke what?
>> You could have  voiced out such comment in V1, V2 before the 'final'. 
>
>We all review patches when we can.  There is no rule that people can not
>comment on newer patches, or older ones.
>
>In fact, it would be wonderful if you could take some time and review
>patches from others.  It would help your understanding of the code and
>how the kernel development process works.
>
>thanks,
>
>greg k-h
Agree with this.  But you know, 5 attempt   just for a little update  were rejected
It's so frustrating. Anyway, I re-submit another v3 patch for this change.
Please give your comment if you are free.

Thanks
diff mbox series

Patch

diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c
index c4259cb2d289..3a789bb2f631 100644
--- a/drivers/bus/mhi/host/pci_generic.c
+++ b/drivers/bus/mhi/host/pci_generic.c
@@ -24,6 +24,10 @@ 
 
 #define HEALTH_CHECK_PERIOD (HZ * 2)
 
+/* PCI VID definitions */
+#define PCI_VENDOR_ID_THALES	0x1269
+#define PCI_VENDOR_ID_QUECTEL	0x1eac
+
 /**
  * struct mhi_pci_dev_info - MHI PCI device specific information
  * @config: MHI controller configuration
@@ -557,11 +561,11 @@  static const struct pci_device_id mhi_pci_id_table[] = {
 		.driver_data = (kernel_ulong_t) &mhi_telit_fn990_info },
 	{ PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0308),
 		.driver_data = (kernel_ulong_t) &mhi_qcom_sdx65_info },
-	{ PCI_DEVICE(0x1eac, 0x1001), /* EM120R-GL (sdx24) */
+	{ PCI_DEVICE(PCI_VENDOR_ID_QUECTEL, 0x1001), /* EM120R-GL (sdx24) */
 		.driver_data = (kernel_ulong_t) &mhi_quectel_em1xx_info },
-	{ PCI_DEVICE(0x1eac, 0x1002), /* EM160R-GL (sdx24) */
+	{ PCI_DEVICE(PCI_VENDOR_ID_QUECTEL, 0x1002), /* EM160R-GL (sdx24) */
 		.driver_data = (kernel_ulong_t) &mhi_quectel_em1xx_info },
-	{ PCI_DEVICE(0x1eac, 0x2001), /* EM120R-GL for FCCL (sdx24) */
+	{ PCI_DEVICE(PCI_VENDOR_ID_QUECTEL, 0x2001), /* EM120R-GL for FCCL (sdx24) */
 		.driver_data = (kernel_ulong_t) &mhi_quectel_em1xx_info },
 	/* T99W175 (sdx55), Both for eSIM and Non-eSIM */
 	{ PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0ab),
@@ -585,16 +589,16 @@  static const struct pci_device_id mhi_pci_id_table[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0d9),
 		.driver_data = (kernel_ulong_t) &mhi_foxconn_sdx65_info },
 	/* MV31-W (Cinterion) */
-	{ PCI_DEVICE(0x1269, 0x00b3),
+	{ PCI_DEVICE(PCI_VENDOR_ID_THALES, 0x00b3),
 		.driver_data = (kernel_ulong_t) &mhi_mv31_info },
 	/* MV31-W (Cinterion), based on new baseline */
-	{ PCI_DEVICE(0x1269, 0x00b4),
+	{ PCI_DEVICE(PCI_VENDOR_ID_THALES, 0x00b4),
 		.driver_data = (kernel_ulong_t) &mhi_mv31_info },
 	/* MV32-WA (Cinterion) */
-	{ PCI_DEVICE(0x1269, 0x00ba),
+	{ PCI_DEVICE(PCI_VENDOR_ID_THALES, 0x00ba),
 		.driver_data = (kernel_ulong_t) &mhi_mv32_info },
 	/* MV32-WB (Cinterion) */
-	{ PCI_DEVICE(0x1269, 0x00bb),
+	{ PCI_DEVICE(PCI_VENDOR_ID_THALES, 0x00bb),
 		.driver_data = (kernel_ulong_t) &mhi_mv32_info },
 	{  }
 };