| Message ID | 20221026093710.449809-1-pawell@cadence.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | usb: cdnsp: Fix issue with Clear Feature Halt Endpoint | expand |
> >On 22-10-26 05:37:10, Pawel Laszczak wrote: >> During handling Clear Halt Endpoint Feature request driver invokes >> Reset Endpoint command. Because this command has some issue with > >What are issues? Would you please explain more? I don't know the internal behavior of controller. I know that there is the issue with resetting endpoint in running state, resulting in the controller after rearming start handling incorrect TRB. > >> transition endpoint from Running to Idle state the driver must stop >> the endpoint by using Stop Endpoint command. >> >> cc: <stable@vger.kernel.org> >> Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence >> USBSSP DRD Driver") >> Signed-off-by: Pawel Laszczak <pawell@cadence.com> >> --- >> drivers/usb/cdns3/cdnsp-gadget.c | 12 ++++-------- >> drivers/usb/cdns3/cdnsp-ring.c | 3 ++- >> 2 files changed, 6 insertions(+), 9 deletions(-) >> >> diff --git a/drivers/usb/cdns3/cdnsp-gadget.c >> b/drivers/usb/cdns3/cdnsp-gadget.c >> index e2e7d16f43f4..0576f9b0e4aa 100644 >> --- a/drivers/usb/cdns3/cdnsp-gadget.c >> +++ b/drivers/usb/cdns3/cdnsp-gadget.c >> @@ -600,11 +600,11 @@ int cdnsp_halt_endpoint(struct cdnsp_device >> *pdev, >> >> trace_cdnsp_ep_halt(value ? "Set" : "Clear"); >> >> - if (value) { >> - ret = cdnsp_cmd_stop_ep(pdev, pep); >> - if (ret) >> - return ret; >> + ret = cdnsp_cmd_stop_ep(pdev, pep); >> + if (ret) >> + return ret; >> > >In your change ,it call cdnsp_cmd_stop_ep unconditionally, no matter set or >clear halt? Is it your expectation? If it is, why? No exactly unconditionally. The below condition: if (ep_state == EP_STATE_STOPPED || ep_state == EP_STATE_DISABLED || ep_state == EP_STATE_HALTED) { goto ep_stopped; Will decide whether command will be called or not. It will be called only when endpoint is in RUNNING state. Pawel > >> + if (value) { >> if (GET_EP_CTX_STATE(pep->out_ctx) == >EP_STATE_STOPPED) { >> cdnsp_queue_halt_endpoint(pdev, pep->idx); >> cdnsp_ring_cmd_db(pdev); >> @@ -613,10 +613,6 @@ int cdnsp_halt_endpoint(struct cdnsp_device >> *pdev, >> >> pep->ep_state |= EP_HALTED; >> } else { >> - /* >> - * In device mode driver can call reset endpoint command >> - * from any endpoint state. >> - */ >> cdnsp_queue_reset_ep(pdev, pep->idx); >> cdnsp_ring_cmd_db(pdev); >> ret = cdnsp_wait_for_cmd_compl(pdev); diff --git >> a/drivers/usb/cdns3/cdnsp-ring.c b/drivers/usb/cdns3/cdnsp-ring.c >> index 25e5e51cf5a2..aa79bce89d8a 100644 >> --- a/drivers/usb/cdns3/cdnsp-ring.c >> +++ b/drivers/usb/cdns3/cdnsp-ring.c >> @@ -2081,7 +2081,8 @@ int cdnsp_cmd_stop_ep(struct cdnsp_device >*pdev, struct cdnsp_ep *pep) >> u32 ep_state = GET_EP_CTX_STATE(pep->out_ctx); >> int ret = 0; >> >> - if (ep_state == EP_STATE_STOPPED || ep_state == >EP_STATE_DISABLED) { >> + if (ep_state == EP_STATE_STOPPED || ep_state == >EP_STATE_DISABLED || >> + ep_state == EP_STATE_HALTED) { >> trace_cdnsp_ep_stopped_or_disabled(pep->out_ctx); >> goto ep_stopped; >> } >> -- >> 2.25.1 >> > >-- > >Thanks, >Peter Chen Regards, Pawel Laszczak
On Wed, Oct 26, 2022 at 5:37 PM Pawel Laszczak <pawell@cadence.com> wrote: > > During handling Clear Halt Endpoint Feature request driver invokes Add "," between request and driver. Otherwise, it is okay for me. Reviewed-by: Peter Chen <peter.chen@kernel.org> Peter > Reset Endpoint command. Because this command has some issue with > transition endpoint from Running to Idle state the driver must > stop the endpoint by using Stop Endpoint command. > > cc: <stable@vger.kernel.org> > Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") > Signed-off-by: Pawel Laszczak <pawell@cadence.com> > --- > drivers/usb/cdns3/cdnsp-gadget.c | 12 ++++-------- > drivers/usb/cdns3/cdnsp-ring.c | 3 ++- > 2 files changed, 6 insertions(+), 9 deletions(-) > > diff --git a/drivers/usb/cdns3/cdnsp-gadget.c b/drivers/usb/cdns3/cdnsp-gadget.c > index e2e7d16f43f4..0576f9b0e4aa 100644 > --- a/drivers/usb/cdns3/cdnsp-gadget.c > +++ b/drivers/usb/cdns3/cdnsp-gadget.c > @@ -600,11 +600,11 @@ int cdnsp_halt_endpoint(struct cdnsp_device *pdev, > > trace_cdnsp_ep_halt(value ? "Set" : "Clear"); > > - if (value) { > - ret = cdnsp_cmd_stop_ep(pdev, pep); > - if (ret) > - return ret; > + ret = cdnsp_cmd_stop_ep(pdev, pep); > + if (ret) > + return ret; > > + if (value) { > if (GET_EP_CTX_STATE(pep->out_ctx) == EP_STATE_STOPPED) { > cdnsp_queue_halt_endpoint(pdev, pep->idx); > cdnsp_ring_cmd_db(pdev); > @@ -613,10 +613,6 @@ int cdnsp_halt_endpoint(struct cdnsp_device *pdev, > > pep->ep_state |= EP_HALTED; > } else { > - /* > - * In device mode driver can call reset endpoint command > - * from any endpoint state. > - */ > cdnsp_queue_reset_ep(pdev, pep->idx); > cdnsp_ring_cmd_db(pdev); > ret = cdnsp_wait_for_cmd_compl(pdev); > diff --git a/drivers/usb/cdns3/cdnsp-ring.c b/drivers/usb/cdns3/cdnsp-ring.c > index 25e5e51cf5a2..aa79bce89d8a 100644 > --- a/drivers/usb/cdns3/cdnsp-ring.c > +++ b/drivers/usb/cdns3/cdnsp-ring.c > @@ -2081,7 +2081,8 @@ int cdnsp_cmd_stop_ep(struct cdnsp_device *pdev, struct cdnsp_ep *pep) > u32 ep_state = GET_EP_CTX_STATE(pep->out_ctx); > int ret = 0; > > - if (ep_state == EP_STATE_STOPPED || ep_state == EP_STATE_DISABLED) { > + if (ep_state == EP_STATE_STOPPED || ep_state == EP_STATE_DISABLED || > + ep_state == EP_STATE_HALTED) { > trace_cdnsp_ep_stopped_or_disabled(pep->out_ctx); > goto ep_stopped; > } > -- > 2.25.1 >
diff --git a/drivers/usb/cdns3/cdnsp-gadget.c b/drivers/usb/cdns3/cdnsp-gadget.c index e2e7d16f43f4..0576f9b0e4aa 100644 --- a/drivers/usb/cdns3/cdnsp-gadget.c +++ b/drivers/usb/cdns3/cdnsp-gadget.c @@ -600,11 +600,11 @@ int cdnsp_halt_endpoint(struct cdnsp_device *pdev, trace_cdnsp_ep_halt(value ? "Set" : "Clear"); - if (value) { - ret = cdnsp_cmd_stop_ep(pdev, pep); - if (ret) - return ret; + ret = cdnsp_cmd_stop_ep(pdev, pep); + if (ret) + return ret; + if (value) { if (GET_EP_CTX_STATE(pep->out_ctx) == EP_STATE_STOPPED) { cdnsp_queue_halt_endpoint(pdev, pep->idx); cdnsp_ring_cmd_db(pdev); @@ -613,10 +613,6 @@ int cdnsp_halt_endpoint(struct cdnsp_device *pdev, pep->ep_state |= EP_HALTED; } else { - /* - * In device mode driver can call reset endpoint command - * from any endpoint state. - */ cdnsp_queue_reset_ep(pdev, pep->idx); cdnsp_ring_cmd_db(pdev); ret = cdnsp_wait_for_cmd_compl(pdev); diff --git a/drivers/usb/cdns3/cdnsp-ring.c b/drivers/usb/cdns3/cdnsp-ring.c index 25e5e51cf5a2..aa79bce89d8a 100644 --- a/drivers/usb/cdns3/cdnsp-ring.c +++ b/drivers/usb/cdns3/cdnsp-ring.c @@ -2081,7 +2081,8 @@ int cdnsp_cmd_stop_ep(struct cdnsp_device *pdev, struct cdnsp_ep *pep) u32 ep_state = GET_EP_CTX_STATE(pep->out_ctx); int ret = 0; - if (ep_state == EP_STATE_STOPPED || ep_state == EP_STATE_DISABLED) { + if (ep_state == EP_STATE_STOPPED || ep_state == EP_STATE_DISABLED || + ep_state == EP_STATE_HALTED) { trace_cdnsp_ep_stopped_or_disabled(pep->out_ctx); goto ep_stopped; }
During handling Clear Halt Endpoint Feature request driver invokes Reset Endpoint command. Because this command has some issue with transition endpoint from Running to Idle state the driver must stop the endpoint by using Stop Endpoint command. cc: <stable@vger.kernel.org> Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Signed-off-by: Pawel Laszczak <pawell@cadence.com> --- drivers/usb/cdns3/cdnsp-gadget.c | 12 ++++-------- drivers/usb/cdns3/cdnsp-ring.c | 3 ++- 2 files changed, 6 insertions(+), 9 deletions(-)