diff mbox series

[v6,31/35] scsi: sd: Have scsi-ml retry read_capacity_10 errors

Message ID 20221104231927.9613-32-michael.christie@oracle.com
State New
Headers show
Series Allow scsi_execute users to control retries | expand

Commit Message

Mike Christie Nov. 4, 2022, 11:19 p.m. UTC 
This has read_capacity_10 have scsi-ml retry errors instead of driving
them itself.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
---
 drivers/scsi/sd.c | 76 ++++++++++++++++++++++++++++-------------------
 1 file changed, 45 insertions(+), 31 deletions(-)

Comments

Bart Van Assche Nov. 9, 2022, 6:55 p.m. UTC | #1 
On 11/4/22 16:19, Mike Christie wrote:
> This has read_capacity_10 have scsi-ml retry errors instead of driving
> them itself.

Reviewed-by: Bart Van Assche <bvanassche@acm.org>
diff mbox series

Patch

diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 0545fadde8c5..96cf5189dea3 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -2435,45 +2435,59 @@  static int read_capacity_16(struct scsi_disk *sdkp, struct scsi_device *sdp,
 static int read_capacity_10(struct scsi_disk *sdkp, struct scsi_device *sdp,
 						unsigned char *buffer)
 {
-	unsigned char cmd[16];
+	static const u8 cmd[10] = { READ_CAPACITY };
 	struct scsi_sense_hdr sshdr;
 	int sense_valid = 0;
 	int the_result;
-	int retries = 3, reset_retries = READ_CAPACITY_RETRIES_ON_RESET;
 	sector_t lba;
 	unsigned sector_size;
+	struct scsi_failure failures[] = {
+		/* Fail immediately for Medium Not Present */
+		{
+			.sense = UNIT_ATTENTION,
+			.asc = 0x3A,
+			.ascq = 0x0,
+			.allowed = 0,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		{
+			.sense = NOT_READY,
+			.asc = 0x3A,
+			.ascq = 0x0,
+			.allowed = 0,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		{
+			.sense = UNIT_ATTENTION,
+			.asc = 0x29,
+			.ascq = 0,
+			/* Device reset might occur several times */
+			.allowed = READ_CAPACITY_RETRIES_ON_RESET,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		/* Any other error not listed above retry */
+		{
+			.result = SCMD_FAILURE_RESULT_ANY,
+			.allowed = 3,
+		},
+		{},
+	};
 
-	do {
-		cmd[0] = READ_CAPACITY;
-		memset(&cmd[1], 0, 9);
-		memset(buffer, 0, 8);
-
-		the_result = scsi_exec_req(((struct scsi_exec_args) {
-						.sdev = sdp,
-						.cmd = cmd,
-						.data_dir = DMA_FROM_DEVICE,
-						.buf = buffer,
-						.buf_len = 8,
-						.sshdr = &sshdr,
-						.timeout = SD_TIMEOUT,
-						.retries = sdkp->max_retries }));
-
-		if (media_not_present(sdkp, &sshdr))
-			return -ENODEV;
+	memset(buffer, 0, 8);
 
-		if (the_result > 0) {
-			sense_valid = scsi_sense_valid(&sshdr);
-			if (sense_valid &&
-			    sshdr.sense_key == UNIT_ATTENTION &&
-			    sshdr.asc == 0x29 && sshdr.ascq == 0x00)
-				/* Device reset might occur several times,
-				 * give it one more chance */
-				if (--reset_retries > 0)
-					continue;
-		}
-		retries--;
+	the_result = scsi_exec_req(((struct scsi_exec_args) {
+					.sdev = sdp,
+					.cmd = cmd,
+					.data_dir = DMA_FROM_DEVICE,
+					.buf = buffer,
+					.buf_len = 8,
+					.sshdr = &sshdr,
+					.timeout = SD_TIMEOUT,
+					.retries = sdkp->max_retries,
+					.failures = failures }));
 
-	} while (the_result && retries);
+	if (media_not_present(sdkp, &sshdr))
+		return -ENODEV;
 
 	if (the_result) {
 		sd_print_result(sdkp, "Read Capacity(10) failed", the_result);