| Message ID | 20221105092500.12145-1-linux@fw-web.de |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v3] dt-bindings: pinctrl: update uart/mmc bindings for MT7986 SoC | expand |
On Sat, 05 Nov 2022 10:25:00 +0100, Frank Wunderlich wrote: > From: Frank Wunderlich <frank-w@public-files.de> > > Some pinmux pins of the mt7986 pinctrl driver is composed of multiple > pinctrl groups, the original binding only allows one pinctrl group > per dts node, this patch sets "maxItems" for these groups and add new > examples to the binding documentation. > > Fixes: 65916a1ca90a ("dt-bindings: pinctrl: update bindings for MT7986 SoC") > Signed-off-by: Sam Shih <sam.shih@mediatek.com> > Signed-off-by: Frank Wunderlich <frank-w@public-files.de> > --- > sorry, messed up email-list, so resend it > > v3: > - squashed version from sam > - v2 was ack'd by Krzysztof, but sams patch included updated emmc-names > and different structure for uart to allow 2 pingroups > v2: > - wrap on col 80 > --- > .../pinctrl/mediatek,mt7986-pinctrl.yaml | 46 +++++++++++++++++-- > 1 file changed, 41 insertions(+), 5 deletions(-) > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.example.dtb: pinctrl@1001f000: pcie-pins:mux:groups: ['pcie_clk', 'pcie_wake', 'pcie_pereset'] is too long From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.example.dtb: pinctrl@1001f000: pwm-pins:mux:groups: ['pwm0', 'pwm1_0'] is too long From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.example.dtb: pinctrl@1001f000: spi0-pins:mux:groups: ['spi0', 'spi0_wp_hold'] is too long From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/ This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
Hi > Gesendet: Samstag, 05. November 2022 um 15:52 Uhr > Von: "Rob Herring" <robh@kernel.org> > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' > on your patch (DT_CHECKER_FLAGS is new in v5.13): > > yamllint warnings/errors: > > dtschema/dtc warnings/errors: > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.example.dtb: pinctrl@1001f000: pcie-pins:mux:groups: ['pcie_clk', 'pcie_wake', 'pcie_pereset'] is too long > From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.example.dtb: pinctrl@1001f000: pwm-pins:mux:groups: ['pwm0', 'pwm1_0'] is too long > From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.example.dtb: pinctrl@1001f000: spi0-pins:mux:groups: ['spi0', 'spi0_wp_hold'] is too long > From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml these are handled by this Patch, sorry to not mention the depency https://patchwork.kernel.org/project/linux-mediatek/patch/20221024074349.7777-1-linux@fw-web.de/ regards Frank
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml index 75766956cfad..b2b9c01efd70 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml @@ -87,6 +87,8 @@ patternProperties: "wifi_led" "led" 1, 2 "i2c" "i2c" 3, 4 "uart1_0" "uart" 7, 8, 9, 10 + "uart1_rx_tx" "uart" 42, 43 + "uart1_cts_rts" "uart" 44, 45 "pcie_clk" "pcie" 9 "pcie_wake" "pcie" 10 "spi1_0" "spi" 11, 12, 13, 14 @@ -98,9 +100,11 @@ patternProperties: "emmc_45" "emmc" 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32 "spi1_1" "spi" 23, 24, 25, 26 - "uart1_2" "uart" 29, 30, 31, 32 + "uart1_2_rx_tx" "uart" 29, 30 + "uart1_2_cts_rts" "uart" 31, 32 "uart1_1" "uart" 23, 24, 25, 26 - "uart2_0" "uart" 29, 30, 31, 32 + "uart2_0_rx_tx" "uart" 29, 30 + "uart2_0_cts_rts" "uart" 31, 32 "spi0" "spi" 33, 34, 35, 36 "spi0_wp_hold" "spi" 37, 38 "uart1_3_rx_tx" "uart" 35, 36 @@ -157,7 +161,7 @@ patternProperties: then: properties: groups: - enum: [emmc, emmc_rst] + enum: [emmc_45, emmc_51] - if: properties: function: @@ -227,8 +231,12 @@ patternProperties: then: properties: groups: - enum: [uart1_0, uart1_1, uart1_2, uart1_3_rx_tx, - uart1_3_cts_rts, uart2_0, uart2_1, uart0, uart1, uart2] + items: + enum: [uart1_0, uart1_rx_tx, uart1_cts_rts, uart1_1, + uart1_2_rx_tx, uart1_2_cts_rts, uart1_3_rx_tx, + uart1_3_cts_rts, uart2_0_rx_tx, uart2_0_cts_rts, + uart2_1, uart0, uart1, uart2] + maxItems: 2 - if: properties: function: @@ -362,6 +370,27 @@ examples: interrupt-parent = <&gic>; #interrupt-cells = <2>; + pcie_pins: pcie-pins { + mux { + function = "pcie"; + groups = "pcie_clk", "pcie_wake", "pcie_pereset"; + }; + }; + + pwm_pins: pwm-pins { + mux { + function = "pwm"; + groups = "pwm0", "pwm1_0"; + }; + }; + + spi0_pins: spi0-pins { + mux { + function = "spi"; + groups = "spi0", "spi0_wp_hold"; + }; + }; + uart1_pins: uart1-pins { mux { function = "uart"; @@ -369,6 +398,13 @@ examples: }; }; + uart1_3_pins: uart1-3-pins { + mux { + function = "uart"; + groups = "uart1_3_rx_tx", "uart1_3_cts_rts"; + }; + }; + uart2_pins: uart2-pins { mux { function = "uart";