[v6,1/2] dt-bindings: input: document Qualcomm PMI8998 haptics driver

Add bindings for qcom PMIC PMI8998 haptics driver.

Signed-off-by: Caleb Connolly <caleb@connolly.tech>
---
 .../bindings/input/qcom,pmi8998-haptics.yaml  | 71 +++++++++++++++++++
 1 file changed, 71 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/qcom,pmi8998-haptics.yaml

--
2.38.0

On 10/10/2022 12:30, Caleb Connolly wrote:
> Add bindings for qcom PMIC PMI8998 haptics driver.
> 
> Signed-off-by: Caleb Connolly <caleb@connolly.tech>
> ---
>  .../bindings/input/qcom,pmi8998-haptics.yaml  | 71 +++++++++++++++++++
>  1 file changed, 71 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/input/qcom,pmi8998-haptics.yaml
> 
> diff --git a/Documentation/devicetree/bindings/input/qcom,pmi8998-haptics.yaml b/Documentation/devicetree/bindings/input/qcom,pmi8998-haptics.yaml
> new file mode 100644
> index 000000000000..9f51c527595c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/qcom,pmi8998-haptics.yaml
> @@ -0,0 +1,71 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright 2020 Unisoc Inc.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/input/qcom,pmi8998-haptics.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm PMI8998/PM660 Haptics
> +
> +maintainers:
> +  - Caleb Connolly <caleb@connolly.tech>
> +
> +description: |
> +  Qualcomm SPMI haptics is a peripheral on some QTI PMICs. It supports linear resonant
> +  actuators and eccentric rotating mass type haptics commonly found in mobile devices.
> +  It supports multiple sources of wave data such as an internal buffer, direct play
> +  (from kernel or userspace) as well as an audio output mode.
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - qcom,pmi8998-haptics
> +          - qcom,pm660-charger
> +          - qcom,pmi8996-haptics
> +          - qcom,pmi8941-haptics
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 2
> +
> +  interrupt-names:
> +    items:
> +      - const: short
> +      - const: play
> +
> +  qcom,wave-play-rate-us:

s/rate/duration/
?

> +    description: |
> +      Wave sample duration in microseconds, 1/f where f
> +      is the resonant frequency of the actuator.
> +    minimum: 0
> +    maximum: 20475
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - qcom,wave-play-rate-us
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +      #include <dt-bindings/interrupt-controller/irq.h>

Align it with -| above.

> +
> +      spmi {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        pmi8998_haptics: haptics@c000 {
> +          compatible = "qcom,pmi8998-haptics";
> +          reg = <0xc000>;
> +
> +          interrupts = <0x3 0xc0 0x0 IRQ_TYPE_EDGE_BOTH>,
> +                      <0x3 0xc0 0x1 IRQ_TYPE_EDGE_BOTH>;

Align with previous <

> +          interrupt-names = "short", "play";
> +
> +          qcom,wave-play-rate-us = <4255>;
> +        };
> +      };
> --
> 2.38.0
> 
> 

Best regards,
Krzysztof