mbox series

[v5,0/2] add device Xiaomi Mi 6 (codename sagit) and board binding

Message ID 20221003194315.943903-1-dsankouski@gmail.com
Headers show
Series add device Xiaomi Mi 6 (codename sagit) and board binding | expand

Message

Dzmitry Sankouski Oct. 3, 2022, 7:43 p.m. UTC
Add initial support for Xiaomi Mi 6 phone (codename sagit)


Dzmitry Sankouski (2):
  arm64: dts: qcom: sagit: add initial device tree for sagit
  dt-bindings: arm: add xiaomi,sagit board based on msm8998 chip

 .../devicetree/bindings/arm/qcom.yaml         |   1 +
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 .../boot/dts/qcom/msm8998-xiaomi-sagit.dts    | 687 ++++++++++++++++++
 arch/arm64/boot/dts/qcom/pm8998.dtsi          |   6 +
 4 files changed, 695 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts

Comments

Krzysztof Kozlowski Oct. 4, 2022, 11:13 a.m. UTC | #1
On 03/10/2022 21:43, Dzmitry Sankouski wrote:
> 
> add xiaomi,sagit board (Xiaomi Mi 6) binding

NAK, still wrong. Apply comments from v3 and do not send more than one
version per day.

Best regards,
Krzysztof