mbox series

[v3,00/34] pinctrl/arm64: qcom: continued - fix Qualcomm TLMM pinctrl schema warnings

Message ID 20220927173702.5200-1-krzysztof.kozlowski@linaro.org
Headers show
Series pinctrl/arm64: qcom: continued - fix Qualcomm TLMM pinctrl schema warnings | expand

Message

Krzysztof Kozlowski Sept. 27, 2022, 5:36 p.m. UTC 
Hi,

Changes since v2
================
1. ipq6018-cp01-c1: do not switch to blsp1 (Robert).
2. pinctrl: qcom,ipq6018: correct BLSP6->BLSP0 functions: new patch.
3. Drop quotes from $ref when not needed (Rob).
4. Add Rb tags. Few patches from v1 got review from Rob, but I changed them in
   v2 significantly, so I did not keep these Rb tags.

Changes since v1
================
v1: https://lore.kernel.org/linux-devicetree/20220924080459.13084-1-krzysztof.kozlowski@linaro.org/T/#t
1. As Stephan suggested, move check for function on non-GPIO pins to common
   TLMM schema.  This affects few commits in the set named:
   "use common TLMM schema"
   "do not require function on non-GPIOs"

Overview
========
This is the third, independent patchset around Qualcomm pinctrl in recent days:
1. First round of TLMM fixes: merged
2. LPASS fixes:
   https://lore.kernel.org/linux-devicetree/20220927153429.55365-1-krzysztof.kozlowski@linaro.org/T/#t
3. ARMv7 TLMM fixes: *THIS PATCHSET*
4. ARMv8 remaining TLMM fixes: v1 send:
   https://lore.kernel.org/linux-devicetree/20220925110608.145728-1-krzysztof.kozlowski@linaro.org/T/#t

Dependencies
============
1. No dependencies.
2. dt-bindings are independent of DTS patches.

Best regards,
Krzysztof

Krzysztof Kozlowski (34):
  arm64: dts: qcom: ipq6018-cp01-c1: use BLSPI1 pins
  arm64: dts: qcom: ipq6018: align TLMM pin configuration with DT schema
  ARM: dts: qcom: sdx55: add gpio-ranges to TLMM pinctrl
  ARM: dts: qcom: sdx55: align TLMM pin configuration with DT schema
  ARM: dts: qcom: msm8226: align TLMM pin configuration with DT schema
  ARM: dts: qcom: msm8974: align TLMM pin configuration with DT schema
  dt-bindings: pinctrl: qcom,tlmm-common: add common check for function
  dt-bindings: pinctrl: qcom,ipq6018: add qpic_pad function
  dt-bindings: pinctrl: qcom,ipq6018: correct BLSP6->BLSP0 functions
  dt-bindings: pinctrl: qcom,ipq6018: increase number of pins in pinmux
  dt-bindings: pinctrl: qcom,ipq6018: fix matching pin config
  dt-bindings: pinctrl: qcom,ipq6018: use common TLMM schema
  dt-bindings: pinctrl: qcom,ipq6018: fix indentation in example
  dt-bindings: pinctrl: qcom,msm8226: fix matching pin config
  dt-bindings: pinctrl: qcom,msm8226: use common TLMM schema
  dt-bindings: pinctrl: qcom,msm8226: add functions and input-enable
  dt-bindings: pinctrl: qcom,msm8226: fix indentation in example
  dt-bindings: pinctrl: qcom,msm8909-tlmm: fix matching pin config
  dt-bindings: pinctrl: qcom,msm8909-tlmm: do not require function on
    non-GPIOs
  dt-bindings: pinctrl: qcom,msm8909-tlmm: fix indentation in example
  dt-bindings: pinctrl: qcom,msm8953: fix matching pin config
  dt-bindings: pinctrl: qcom,msm8953: use common TLMM schema
  dt-bindings: pinctrl: qcom,msm8953: fix indentation in example
  dt-bindings: pinctrl: qcom,mdm9607: do not require function on
    non-GPIOs
  dt-bindings: pinctrl: qcom,mdm9607: fix indentation in example
  dt-bindings: pinctrl: qcom,qcm2290: fix matching pin config
  dt-bindings: pinctrl: qcom,qcm2290: use common TLMM schema
  dt-bindings: pinctrl: qcom,sdx55: fix matching pin config
  dt-bindings: pinctrl: qcom,sdx55: use common TLMM schema
  dt-bindings: pinctrl: qcom,sdx55: fix indentation in example
  dt-bindings: pinctrl: qcom,sdx65: fix matching pin config
  dt-bindings: pinctrl: qcom,sdx65: use common TLMM schema
  dt-bindings: pinctrl: qcom,sc7280: fix matching pin config
  dt-bindings: pinctrl: qcom,sc8280xp: fix indentation in example
    (remaining piece)

 .../pinctrl/qcom,ipq6018-pinctrl.yaml         | 66 ++++++++++---------
 .../pinctrl/qcom,mdm9607-pinctrl.yaml         | 23 ++++---
 .../pinctrl/qcom,msm8226-pinctrl.yaml         | 63 ++++++++++--------
 .../bindings/pinctrl/qcom,msm8909-tlmm.yaml   | 64 +++++++++---------
 .../pinctrl/qcom,msm8953-pinctrl.yaml         | 51 +++++++-------
 .../pinctrl/qcom,qcm2290-pinctrl.yaml         | 11 ++--
 .../bindings/pinctrl/qcom,sc7280-pinctrl.yaml | 14 +++-
 .../pinctrl/qcom,sc8280xp-pinctrl.yaml        |  4 +-
 .../bindings/pinctrl/qcom,sdx55-pinctrl.yaml  | 51 +++++++-------
 .../bindings/pinctrl/qcom,sdx65-pinctrl.yaml  | 12 ++--
 .../bindings/pinctrl/qcom,tlmm-common.yaml    | 20 ++++--
 arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts   |  6 +-
 arch/arm/boot/dts/qcom-msm8226.dtsi           | 24 +++----
 .../qcom-msm8974-lge-nexus5-hammerhead.dts    | 30 ++++-----
 .../boot/dts/qcom-sdx55-telit-fn980-tlb.dts   | 45 +++++--------
 arch/arm/boot/dts/qcom-sdx55.dtsi             |  1 +
 arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts  |  6 +-
 arch/arm64/boot/dts/qcom/ipq6018.dtsi         |  4 +-
 18 files changed, 266 insertions(+), 229 deletions(-)

Comments

Rob Herring (Arm) Sept. 28, 2022, 12:16 a.m. UTC | #1 
On Tue, 27 Sep 2022 19:36:38 +0200, Krzysztof Kozlowski wrote:
> One pinxmux node can have more than 4 pins to configure:
> 
>   ['gpio1', 'gpio3', 'gpio4', 'gpio5', 'gpio6', 'gpio7', 'gpio8', 'gpio10', 'gpio11', 'gpio12', 'gpio13', 'gpio14', 'gpio15', 'gpio17'] is too long
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Reviewed-by: Bjorn Andersson <andersson@kernel.org>
> ---
>  .../devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml       | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>
Rob Herring (Arm) Sept. 28, 2022, 12:19 a.m. UTC | #2 
On Tue, 27 Sep 2022 19:36:46 +0200, Krzysztof Kozlowski wrote:
> The TLMM pin controller follows generic pin-controller bindings, so
> should have subnodes with '-state' and '-pins'.  Otherwise the subnodes
> (level one and two) are not properly matched.  This method also unifies
> the bindings with other Qualcomm TLMM and LPASS pinctrl bindings.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Reviewed-by: Bjorn Andersson <andersson@kernel.org>
> ---
>  .../devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml     | 7 ++++---
>  1 file changed, 4 insertions(+), 3 deletions(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>
Rob Herring (Arm) Sept. 28, 2022, 12:20 a.m. UTC | #3 
On Tue, 27 Sep 2022 19:36:50 +0200, Krzysztof Kozlowski wrote:
> Reference common Qualcomm TLMM pin controller schema, to bring other
> regular schemas and additional checks, like function required only for
> GPIOs.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Reviewed-by: Bjorn Andersson <andersson@kernel.org>
> 
> ---
> 
> v1 was reviewed by Rob, but patch was changed since that time, so not
> adding Rob's tag.
> ---
>  .../devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml    | 5 ++---
>  1 file changed, 2 insertions(+), 3 deletions(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>
Rob Herring (Arm) Sept. 28, 2022, 12:21 a.m. UTC | #4 
On Tue, 27 Sep 2022 19:36:54 +0200, Krzysztof Kozlowski wrote:
> The TLMM pin controller follows generic pin-controller bindings, so
> should have subnodes with '-state' and '-pins'.  Otherwise the subnodes
> (level one and two) are not properly matched.  This method also unifies
> the bindings with other Qualcomm TLMM and LPASS pinctrl bindings.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Reviewed-by: Bjorn Andersson <andersson@kernel.org>
> ---
>  .../bindings/pinctrl/qcom,qcm2290-pinctrl.yaml           | 9 +++++----
>  1 file changed, 5 insertions(+), 4 deletions(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>
Rob Herring (Arm) Sept. 28, 2022, 12:22 a.m. UTC | #5 
On Tue, 27 Sep 2022 19:36:56 +0200, Krzysztof Kozlowski wrote:
> The TLMM pin controller follows generic pin-controller bindings, so
> should have subnodes with '-state' and '-pins'.  Otherwise the subnodes
> (level one and two) are not properly matched.
> 
>   qcom-sdx55-telit-fn980-tlb.dtb: pinctrl@f100000: 'pcie_ep_clkreq_default', 'pcie_ep_perst_default', 'pcie_ep_wake_default' do not match any of the regexes: '-pins$', 'pinctrl-[0-9]+'
> 
> This method also unifies the bindings with other Qualcomm TLMM and LPASS
> pinctrl bindings.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Reviewed-by: Bjorn Andersson <andersson@kernel.org>
> ---
>  .../bindings/pinctrl/qcom,sdx55-pinctrl.yaml       | 14 +++++++++++---
>  1 file changed, 11 insertions(+), 3 deletions(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>
Rob Herring (Arm) Sept. 28, 2022, 12:24 a.m. UTC | #6 
On Tue, 27 Sep 2022 19:37:02 +0200, Krzysztof Kozlowski wrote:
> Bindings example should be indented with 4-spaces.  Previous adjustment
> missefd one spot.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Reviewed-by: Bjorn Andersson <andersson@kernel.org>
> ---
>  .../devicetree/bindings/pinctrl/qcom,sc8280xp-pinctrl.yaml    | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>
Stephan Gerhold Sept. 28, 2022, 6:07 p.m. UTC | #7 
On Tue, Sep 27, 2022 at 07:36:46PM +0200, Krzysztof Kozlowski wrote:
> The TLMM pin controller follows generic pin-controller bindings, so
> should have subnodes with '-state' and '-pins'.  Otherwise the subnodes
> (level one and two) are not properly matched.  This method also unifies
> the bindings with other Qualcomm TLMM and LPASS pinctrl bindings.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Reviewed-by: Bjorn Andersson <andersson@kernel.org>

Reviewed-by: Stephan Gerhold <stephan@gerhold.net>

> ---
>  .../devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml     | 7 ++++---
>  1 file changed, 4 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml
> index e03530091478..b1735918fa90 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml
> @@ -43,8 +43,9 @@ patternProperties:
>      oneOf:
>        - $ref: "#/$defs/qcom-msm8909-tlmm-state"
>        - patternProperties:
> -          ".*":
> +          "-pins$":
>              $ref: "#/$defs/qcom-msm8909-tlmm-state"
> +        additionalProperties: false
>  
>  $defs:
>    qcom-msm8909-tlmm-state:
> @@ -136,13 +137,13 @@ examples:
>                  };
>  
>                  uart-w-subnodes-state {
> -                        rx {
> +                        rx-pins {
>                                  pins = "gpio4";
>                                  function = "blsp_uart1";
>                                  bias-pull-up;
>                          };
>  
> -                        tx {
> +                        tx-pins {
>                                  pins = "gpio5";
>                                  function = "blsp_uart1";
>                                  bias-disable;
> -- 
> 2.34.1
>