mbox series

[V2,0/9] Added Standard mode and SMBus support.

Message ID 1663836294-5698-1-git-send-email-manikanta.guntupalli@xilinx.com
Headers show
Series Added Standard mode and SMBus support. | expand

Message

Manikanta Guntupalli Sept. 22, 2022, 8:44 a.m. UTC 
-Added standard mode for AXI I2C controller.
-Added Smbus block read support to xiic driver.
-Added 'xlnx,axi-iic-2.1' new IP version support.
-Added dynamic SCL frequency configuration support.
-Removed 'local_irq_save/restore' calls as discussed
 here: https://www.spinics.net/lists/linux-i2c/msg46483.html.

Raviteja Narayanam (9):
  i2c: xiic: Add standard mode support for > 255 byte read transfers
  i2c: xiic: Fix Rx and Tx paths in standard mode repeated start
  i2c: xiic: Switch to Xiic standard mode for i2c-read
  i2c: xiic: Add wait for FIFO empty in send_tx
  i2c: xiic: Add smbus_block_read functionality
  i2c: xiic: Remove interrupt enable/disable in Rx path
  dt-bindings: i2c: xiic: Add 'xlnx,axi-iic-2.1' to compatible
  i2c: xiic: Update compatible with new IP version
  i2c: xiic: Add SCL frequency configuration support

 .../bindings/i2c/xlnx,xps-iic-2.00.a.yaml     |   7 +-
 drivers/i2c/busses/i2c-xiic.c                 | 582 ++++++++++++++++--
 2 files changed, 537 insertions(+), 52 deletions(-)

Comments

Michal Simek Sept. 26, 2022, 12:16 p.m. UTC | #1 
On 9/22/22 10:44, Manikanta Guntupalli wrote:
> -Added standard mode for AXI I2C controller.
> -Added Smbus block read support to xiic driver.
> -Added 'xlnx,axi-iic-2.1' new IP version support.
> -Added dynamic SCL frequency configuration support.
> -Removed 'local_irq_save/restore' calls as discussed
>   here: https://www.spinics.net/lists/linux-i2c/msg46483.html.
> 
> Raviteja Narayanam (9):
>    i2c: xiic: Add standard mode support for > 255 byte read transfers
>    i2c: xiic: Fix Rx and Tx paths in standard mode repeated start
>    i2c: xiic: Switch to Xiic standard mode for i2c-read
>    i2c: xiic: Add wait for FIFO empty in send_tx
>    i2c: xiic: Add smbus_block_read functionality
>    i2c: xiic: Remove interrupt enable/disable in Rx path
>    dt-bindings: i2c: xiic: Add 'xlnx,axi-iic-2.1' to compatible
>    i2c: xiic: Update compatible with new IP version
>    i2c: xiic: Add SCL frequency configuration support
> 
>   .../bindings/i2c/xlnx,xps-iic-2.00.a.yaml     |   7 +-
>   drivers/i2c/busses/i2c-xiic.c                 | 582 ++++++++++++++++--
>   2 files changed, 537 insertions(+), 52 deletions(-)
> 

I was reviewing this code internally that's why

Acked-by: Michal Simek <michal.simek@amd.com>

Thanks,
Michal