| Message ID | 20220921094244.606948-6-daniel.lezcano@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Rework the trip points creation | expand |
On Wed, 2022-09-21 at 11:42 +0200, Daniel Lezcano wrote: > The governors are using the ops->get_trip_* functions, Replace these > calls with thermal_zone_get_trip(). > > Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> > --- > drivers/thermal/gov_bang_bang.c | 23 +++++------- > drivers/thermal/gov_fair_share.c | 18 ++++------ > drivers/thermal/gov_power_allocator.c | 51 ++++++++++++------------- > -- > drivers/thermal/gov_step_wise.c | 22 ++++++------ > 4 files changed, 47 insertions(+), 67 deletions(-) > > diff --git a/drivers/thermal/gov_bang_bang.c > b/drivers/thermal/gov_bang_bang.c > index a08bbe33be96..09234f3d2fb9 100644 > --- a/drivers/thermal/gov_bang_bang.c > +++ b/drivers/thermal/gov_bang_bang.c > @@ -13,26 +13,19 @@ > > #include "thermal_core.h" > > -static void thermal_zone_trip_update(struct thermal_zone_device *tz, > int trip) > +static void thermal_zone_trip_update(struct thermal_zone_device *tz, > int trip_id) > { > - int trip_temp, trip_hyst; > + struct thermal_trip trip; > struct thermal_instance *instance; > > - tz->ops->get_trip_temp(tz, trip, &trip_temp); > - > - if (!tz->ops->get_trip_hyst) { > - pr_warn_once("Undefined get_trip_hyst for thermal zone > %s - " > - "running with default hysteresis > zero\n", tz->type); > - trip_hyst = 0; > - } else > - tz->ops->get_trip_hyst(tz, trip, &trip_hyst); > + thermal_zone_get_trip(tz, trip_id, &trip); > We lose the warning messages, but I don't know how important this warning message is. Other than that, Reviewed-by: Zhang Rui <rui.zhang@intel.com> thanks, rui > > dev_dbg(&tz->device, "Trip%d[temp=%d]:temp=%d:hyst=%d\n", > - trip, trip_temp, tz->temperature, > - trip_hyst); > + trip_id, trip.temperature, tz- > >temperature, > + trip.hysteresis); > > list_for_each_entry(instance, &tz->thermal_instances, tz_node) > { > - if (instance->trip != trip) > + if (instance->trip != trip_id) > continue; > > /* in case fan is in initial state, switch the fan off > */ > @@ -50,10 +43,10 @@ static void thermal_zone_trip_update(struct > thermal_zone_device *tz, int trip) > * enable fan when temperature exceeds trip_temp and > disable > * the fan in case it falls below trip_temp minus > hysteresis > */ > - if (instance->target == 0 && tz->temperature >= > trip_temp) > + if (instance->target == 0 && tz->temperature >= > trip.temperature) > instance->target = 1; > else if (instance->target == 1 && > - tz->temperature <= trip_temp - > trip_hyst) > + tz->temperature <= trip.temperature - > trip.hysteresis) > instance->target = 0; > > dev_dbg(&instance->cdev->device, "target=%d\n", > diff --git a/drivers/thermal/gov_fair_share.c > b/drivers/thermal/gov_fair_share.c > index a4ee4661e9cc..c515e7a52294 100644 > --- a/drivers/thermal/gov_fair_share.c > +++ b/drivers/thermal/gov_fair_share.c > @@ -21,16 +21,12 @@ > */ > static int get_trip_level(struct thermal_zone_device *tz) > { > - int count = 0; > - int trip_temp; > - enum thermal_trip_type trip_type; > - > - if (tz->num_trips == 0 || !tz->ops->get_trip_temp) > - return 0; > + struct thermal_trip trip; > + int count; > > for (count = 0; count < tz->num_trips; count++) { > - tz->ops->get_trip_temp(tz, count, &trip_temp); > - if (tz->temperature < trip_temp) > + thermal_zone_get_trip(tz, count, &trip); > + if (tz->temperature < trip.temperature) > break; > } > > @@ -38,10 +34,8 @@ static int get_trip_level(struct > thermal_zone_device *tz) > * count > 0 only if temperature is greater than first trip > * point, in which case, trip_point = count - 1 > */ > - if (count > 0) { > - tz->ops->get_trip_type(tz, count - 1, &trip_type); > - trace_thermal_zone_trip(tz, count - 1, trip_type); > - } > + if (count > 0) > + trace_thermal_zone_trip(tz, count - 1, trip.type); > > return count; > } > diff --git a/drivers/thermal/gov_power_allocator.c > b/drivers/thermal/gov_power_allocator.c > index 2d1aeaba38a8..2ef86ced4c7c 100644 > --- a/drivers/thermal/gov_power_allocator.c > +++ b/drivers/thermal/gov_power_allocator.c > @@ -125,16 +125,15 @@ static void estimate_pid_constants(struct > thermal_zone_device *tz, > u32 sustainable_power, int > trip_switch_on, > int control_temp) > { > + struct thermal_trip trip; > + u32 temperature_threshold = control_temp; > int ret; > - int switch_on_temp; > - u32 temperature_threshold; > s32 k_i; > > - ret = tz->ops->get_trip_temp(tz, trip_switch_on, > &switch_on_temp); > - if (ret) > - switch_on_temp = 0; > + ret = thermal_zone_get_trip(tz, trip_switch_on, &trip); > + if (!ret) > + temperature_threshold -= trip.temperature; > > - temperature_threshold = control_temp - switch_on_temp; > /* > * estimate_pid_constants() tries to find appropriate default > * values for thermal zones that don't provide them. If a > @@ -520,10 +519,10 @@ static void get_governor_trips(struct > thermal_zone_device *tz, > last_passive = INVALID_TRIP; > > for (i = 0; i < tz->num_trips; i++) { > - enum thermal_trip_type type; > + struct thermal_trip trip; > int ret; > > - ret = tz->ops->get_trip_type(tz, i, &type); > + ret = thermal_zone_get_trip(tz, i, &trip); > if (ret) { > dev_warn(&tz->device, > "Failed to get trip point %d type: > %d\n", i, > @@ -531,14 +530,14 @@ static void get_governor_trips(struct > thermal_zone_device *tz, > continue; > } > > - if (type == THERMAL_TRIP_PASSIVE) { > + if (trip.type == THERMAL_TRIP_PASSIVE) { > if (!found_first_passive) { > params->trip_switch_on = i; > found_first_passive = true; > } else { > last_passive = i; > } > - } else if (type == THERMAL_TRIP_ACTIVE) { > + } else if (trip.type == THERMAL_TRIP_ACTIVE) { > last_active = i; > } else { > break; > @@ -633,7 +632,7 @@ static int power_allocator_bind(struct > thermal_zone_device *tz) > { > int ret; > struct power_allocator_params *params; > - int control_temp; > + struct thermal_trip trip; > > ret = check_power_actors(tz); > if (ret) > @@ -659,13 +658,12 @@ static int power_allocator_bind(struct > thermal_zone_device *tz) > get_governor_trips(tz, params); > > if (tz->num_trips > 0) { > - ret = tz->ops->get_trip_temp(tz, > - params- > >trip_max_desired_temperature, > - &control_temp); > + ret = thermal_zone_get_trip(tz, params- > >trip_max_desired_temperature, > + &trip); > if (!ret) > estimate_pid_constants(tz, tz->tzp- > >sustainable_power, > params->trip_switch_on, > - control_temp); > + trip.temperature); > } > > reset_pid_controller(params); > @@ -695,11 +693,11 @@ static void power_allocator_unbind(struct > thermal_zone_device *tz) > tz->governor_data = NULL; > } > > -static int power_allocator_throttle(struct thermal_zone_device *tz, > int trip) > +static int power_allocator_throttle(struct thermal_zone_device *tz, > int trip_id) > { > - int ret; > - int switch_on_temp, control_temp; > struct power_allocator_params *params = tz->governor_data; > + struct thermal_trip trip; > + int ret; > bool update; > > lockdep_assert_held(&tz->lock); > @@ -708,13 +706,12 @@ static int power_allocator_throttle(struct > thermal_zone_device *tz, int trip) > * We get called for every trip point but we only need to do > * our calculations once > */ > - if (trip != params->trip_max_desired_temperature) > + if (trip_id != params->trip_max_desired_temperature) > return 0; > > - ret = tz->ops->get_trip_temp(tz, params->trip_switch_on, > - &switch_on_temp); > - if (!ret && (tz->temperature < switch_on_temp)) { > - update = (tz->last_temperature >= switch_on_temp); > + ret = thermal_zone_get_trip(tz, params->trip_switch_on, &trip); > + if (!ret && (tz->temperature < trip.temperature)) { > + update = (tz->last_temperature >= trip.temperature); > tz->passive = 0; > reset_pid_controller(params); > allow_maximum_power(tz, update); > @@ -723,16 +720,14 @@ static int power_allocator_throttle(struct > thermal_zone_device *tz, int trip) > > tz->passive = 1; > > - ret = tz->ops->get_trip_temp(tz, params- > >trip_max_desired_temperature, > - &control_temp); > + ret = thermal_zone_get_trip(tz, params- > >trip_max_desired_temperature, &trip); > if (ret) { > - dev_warn(&tz->device, > - "Failed to get the maximum desired > temperature: %d\n", > + dev_warn(&tz->device, "Failed to get the maximum > desired temperature: %d\n", > ret); > return ret; > } > > - return allocate_power(tz, control_temp); > + return allocate_power(tz, trip.temperature); > } > > static struct thermal_governor thermal_gov_power_allocator = { > diff --git a/drivers/thermal/gov_step_wise.c > b/drivers/thermal/gov_step_wise.c > index cdd3354bc27f..3cb16d7e65d1 100644 > --- a/drivers/thermal/gov_step_wise.c > +++ b/drivers/thermal/gov_step_wise.c > @@ -95,30 +95,28 @@ static void update_passive_instance(struct > thermal_zone_device *tz, > tz->passive += value; > } > > -static void thermal_zone_trip_update(struct thermal_zone_device *tz, > int trip) > +static void thermal_zone_trip_update(struct thermal_zone_device *tz, > int trip_id) > { > - int trip_temp; > - enum thermal_trip_type trip_type; > enum thermal_trend trend; > struct thermal_instance *instance; > + struct thermal_trip trip; > bool throttle = false; > int old_target; > > - tz->ops->get_trip_temp(tz, trip, &trip_temp); > - tz->ops->get_trip_type(tz, trip, &trip_type); > + thermal_zone_get_trip(tz, trip_id, &trip); > > - trend = get_tz_trend(tz, trip); > + trend = get_tz_trend(tz, trip_id); > > - if (tz->temperature >= trip_temp) { > + if (tz->temperature >= trip.temperature) { > throttle = true; > - trace_thermal_zone_trip(tz, trip, trip_type); > + trace_thermal_zone_trip(tz, trip_id, trip.type); > } > > dev_dbg(&tz->device, > "Trip%d[type=%d,temp=%d]:trend=%d,throttle=%d\n", > - trip, trip_type, trip_temp, trend, > throttle); > + trip_id, trip.type, trip.temperature, > trend, throttle); > > list_for_each_entry(instance, &tz->thermal_instances, tz_node) > { > - if (instance->trip != trip) > + if (instance->trip != trip_id) > continue; > > old_target = instance->target; > @@ -132,11 +130,11 @@ static void thermal_zone_trip_update(struct > thermal_zone_device *tz, int trip) > /* Activate a passive thermal instance */ > if (old_target == THERMAL_NO_TARGET && > instance->target != THERMAL_NO_TARGET) > - update_passive_instance(tz, trip_type, 1); > + update_passive_instance(tz, trip.type, 1); > /* Deactivate a passive thermal instance */ > else if (old_target != THERMAL_NO_TARGET && > instance->target == THERMAL_NO_TARGET) > - update_passive_instance(tz, trip_type, -1); > + update_passive_instance(tz, trip.type, -1); > > instance->initialized = true; > mutex_lock(&instance->cdev->lock);
Hi Daniel, On 9/21/22 10:42, Daniel Lezcano wrote: > The governors are using the ops->get_trip_* functions, Replace these > calls with thermal_zone_get_trip(). > > Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> > --- > drivers/thermal/gov_bang_bang.c | 23 +++++------- > drivers/thermal/gov_fair_share.c | 18 ++++------ > drivers/thermal/gov_power_allocator.c | 51 ++++++++++++--------------- > drivers/thermal/gov_step_wise.c | 22 ++++++------ > 4 files changed, 47 insertions(+), 67 deletions(-) > [snip] > diff --git a/drivers/thermal/gov_power_allocator.c b/drivers/thermal/gov_power_allocator.c > index 2d1aeaba38a8..2ef86ced4c7c 100644 > --- a/drivers/thermal/gov_power_allocator.c > +++ b/drivers/thermal/gov_power_allocator.c > @@ -125,16 +125,15 @@ static void estimate_pid_constants(struct thermal_zone_device *tz, > u32 sustainable_power, int trip_switch_on, > int control_temp) > { > + struct thermal_trip trip; > + u32 temperature_threshold = control_temp; > int ret; > - int switch_on_temp; > - u32 temperature_threshold; > s32 k_i; > > - ret = tz->ops->get_trip_temp(tz, trip_switch_on, &switch_on_temp); > - if (ret) > - switch_on_temp = 0; > + ret = thermal_zone_get_trip(tz, trip_switch_on, &trip); > + if (!ret) > + temperature_threshold -= trip.temperature; > > - temperature_threshold = control_temp - switch_on_temp; > /* > * estimate_pid_constants() tries to find appropriate default > * values for thermal zones that don't provide them. If a > @@ -520,10 +519,10 @@ static void get_governor_trips(struct thermal_zone_device *tz, > last_passive = INVALID_TRIP; > > for (i = 0; i < tz->num_trips; i++) { > - enum thermal_trip_type type; > + struct thermal_trip trip; > int ret; > > - ret = tz->ops->get_trip_type(tz, i, &type); > + ret = thermal_zone_get_trip(tz, i, &trip); > if (ret) { > dev_warn(&tz->device, > "Failed to get trip point %d type: %d\n", i, > @@ -531,14 +530,14 @@ static void get_governor_trips(struct thermal_zone_device *tz, > continue; > } > > - if (type == THERMAL_TRIP_PASSIVE) { > + if (trip.type == THERMAL_TRIP_PASSIVE) { > if (!found_first_passive) { > params->trip_switch_on = i; > found_first_passive = true; > } else { > last_passive = i; > } > - } else if (type == THERMAL_TRIP_ACTIVE) { > + } else if (trip.type == THERMAL_TRIP_ACTIVE) { > last_active = i; > } else { > break; > @@ -633,7 +632,7 @@ static int power_allocator_bind(struct thermal_zone_device *tz) > { > int ret; > struct power_allocator_params *params; > - int control_temp; > + struct thermal_trip trip; > > ret = check_power_actors(tz); > if (ret) > @@ -659,13 +658,12 @@ static int power_allocator_bind(struct thermal_zone_device *tz) > get_governor_trips(tz, params); > > if (tz->num_trips > 0) { > - ret = tz->ops->get_trip_temp(tz, > - params->trip_max_desired_temperature, > - &control_temp); > + ret = thermal_zone_get_trip(tz, params->trip_max_desired_temperature, > + &trip); > if (!ret) > estimate_pid_constants(tz, tz->tzp->sustainable_power, > params->trip_switch_on, > - control_temp); > + trip.temperature); > } > > reset_pid_controller(params); > @@ -695,11 +693,11 @@ static void power_allocator_unbind(struct thermal_zone_device *tz) > tz->governor_data = NULL; > } > > -static int power_allocator_throttle(struct thermal_zone_device *tz, int trip) > +static int power_allocator_throttle(struct thermal_zone_device *tz, int trip_id) > { > - int ret; > - int switch_on_temp, control_temp; > struct power_allocator_params *params = tz->governor_data; > + struct thermal_trip trip; > + int ret; > bool update; > > lockdep_assert_held(&tz->lock); > @@ -708,13 +706,12 @@ static int power_allocator_throttle(struct thermal_zone_device *tz, int trip) > * We get called for every trip point but we only need to do > * our calculations once > */ > - if (trip != params->trip_max_desired_temperature) > + if (trip_id != params->trip_max_desired_temperature) > return 0; > > - ret = tz->ops->get_trip_temp(tz, params->trip_switch_on, > - &switch_on_temp); > - if (!ret && (tz->temperature < switch_on_temp)) { > - update = (tz->last_temperature >= switch_on_temp); > + ret = thermal_zone_get_trip(tz, params->trip_switch_on, &trip); > + if (!ret && (tz->temperature < trip.temperature)) { > + update = (tz->last_temperature >= trip.temperature); > tz->passive = 0; > reset_pid_controller(params); > allow_maximum_power(tz, update); > @@ -723,16 +720,14 @@ static int power_allocator_throttle(struct thermal_zone_device *tz, int trip) > > tz->passive = 1; > > - ret = tz->ops->get_trip_temp(tz, params->trip_max_desired_temperature, > - &control_temp); > + ret = thermal_zone_get_trip(tz, params->trip_max_desired_temperature, &trip); > if (ret) { > - dev_warn(&tz->device, > - "Failed to get the maximum desired temperature: %d\n", > + dev_warn(&tz->device, "Failed to get the maximum desired temperature: %d\n", > ret); > return ret; > } > > - return allocate_power(tz, control_temp); > + return allocate_power(tz, trip.temperature); > } > > static struct thermal_governor thermal_gov_power_allocator = { this part of IPA LGTM Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
diff --git a/drivers/thermal/gov_bang_bang.c b/drivers/thermal/gov_bang_bang.c index a08bbe33be96..09234f3d2fb9 100644 --- a/drivers/thermal/gov_bang_bang.c +++ b/drivers/thermal/gov_bang_bang.c @@ -13,26 +13,19 @@ #include "thermal_core.h" -static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip) +static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip_id) { - int trip_temp, trip_hyst; + struct thermal_trip trip; struct thermal_instance *instance; - tz->ops->get_trip_temp(tz, trip, &trip_temp); - - if (!tz->ops->get_trip_hyst) { - pr_warn_once("Undefined get_trip_hyst for thermal zone %s - " - "running with default hysteresis zero\n", tz->type); - trip_hyst = 0; - } else - tz->ops->get_trip_hyst(tz, trip, &trip_hyst); + thermal_zone_get_trip(tz, trip_id, &trip); dev_dbg(&tz->device, "Trip%d[temp=%d]:temp=%d:hyst=%d\n", - trip, trip_temp, tz->temperature, - trip_hyst); + trip_id, trip.temperature, tz->temperature, + trip.hysteresis); list_for_each_entry(instance, &tz->thermal_instances, tz_node) { - if (instance->trip != trip) + if (instance->trip != trip_id) continue; /* in case fan is in initial state, switch the fan off */ @@ -50,10 +43,10 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip) * enable fan when temperature exceeds trip_temp and disable * the fan in case it falls below trip_temp minus hysteresis */ - if (instance->target == 0 && tz->temperature >= trip_temp) + if (instance->target == 0 && tz->temperature >= trip.temperature) instance->target = 1; else if (instance->target == 1 && - tz->temperature <= trip_temp - trip_hyst) + tz->temperature <= trip.temperature - trip.hysteresis) instance->target = 0; dev_dbg(&instance->cdev->device, "target=%d\n", diff --git a/drivers/thermal/gov_fair_share.c b/drivers/thermal/gov_fair_share.c index a4ee4661e9cc..c515e7a52294 100644 --- a/drivers/thermal/gov_fair_share.c +++ b/drivers/thermal/gov_fair_share.c @@ -21,16 +21,12 @@ */ static int get_trip_level(struct thermal_zone_device *tz) { - int count = 0; - int trip_temp; - enum thermal_trip_type trip_type; - - if (tz->num_trips == 0 || !tz->ops->get_trip_temp) - return 0; + struct thermal_trip trip; + int count; for (count = 0; count < tz->num_trips; count++) { - tz->ops->get_trip_temp(tz, count, &trip_temp); - if (tz->temperature < trip_temp) + thermal_zone_get_trip(tz, count, &trip); + if (tz->temperature < trip.temperature) break; } @@ -38,10 +34,8 @@ static int get_trip_level(struct thermal_zone_device *tz) * count > 0 only if temperature is greater than first trip * point, in which case, trip_point = count - 1 */ - if (count > 0) { - tz->ops->get_trip_type(tz, count - 1, &trip_type); - trace_thermal_zone_trip(tz, count - 1, trip_type); - } + if (count > 0) + trace_thermal_zone_trip(tz, count - 1, trip.type); return count; } diff --git a/drivers/thermal/gov_power_allocator.c b/drivers/thermal/gov_power_allocator.c index 2d1aeaba38a8..2ef86ced4c7c 100644 --- a/drivers/thermal/gov_power_allocator.c +++ b/drivers/thermal/gov_power_allocator.c @@ -125,16 +125,15 @@ static void estimate_pid_constants(struct thermal_zone_device *tz, u32 sustainable_power, int trip_switch_on, int control_temp) { + struct thermal_trip trip; + u32 temperature_threshold = control_temp; int ret; - int switch_on_temp; - u32 temperature_threshold; s32 k_i; - ret = tz->ops->get_trip_temp(tz, trip_switch_on, &switch_on_temp); - if (ret) - switch_on_temp = 0; + ret = thermal_zone_get_trip(tz, trip_switch_on, &trip); + if (!ret) + temperature_threshold -= trip.temperature; - temperature_threshold = control_temp - switch_on_temp; /* * estimate_pid_constants() tries to find appropriate default * values for thermal zones that don't provide them. If a @@ -520,10 +519,10 @@ static void get_governor_trips(struct thermal_zone_device *tz, last_passive = INVALID_TRIP; for (i = 0; i < tz->num_trips; i++) { - enum thermal_trip_type type; + struct thermal_trip trip; int ret; - ret = tz->ops->get_trip_type(tz, i, &type); + ret = thermal_zone_get_trip(tz, i, &trip); if (ret) { dev_warn(&tz->device, "Failed to get trip point %d type: %d\n", i, @@ -531,14 +530,14 @@ static void get_governor_trips(struct thermal_zone_device *tz, continue; } - if (type == THERMAL_TRIP_PASSIVE) { + if (trip.type == THERMAL_TRIP_PASSIVE) { if (!found_first_passive) { params->trip_switch_on = i; found_first_passive = true; } else { last_passive = i; } - } else if (type == THERMAL_TRIP_ACTIVE) { + } else if (trip.type == THERMAL_TRIP_ACTIVE) { last_active = i; } else { break; @@ -633,7 +632,7 @@ static int power_allocator_bind(struct thermal_zone_device *tz) { int ret; struct power_allocator_params *params; - int control_temp; + struct thermal_trip trip; ret = check_power_actors(tz); if (ret) @@ -659,13 +658,12 @@ static int power_allocator_bind(struct thermal_zone_device *tz) get_governor_trips(tz, params); if (tz->num_trips > 0) { - ret = tz->ops->get_trip_temp(tz, - params->trip_max_desired_temperature, - &control_temp); + ret = thermal_zone_get_trip(tz, params->trip_max_desired_temperature, + &trip); if (!ret) estimate_pid_constants(tz, tz->tzp->sustainable_power, params->trip_switch_on, - control_temp); + trip.temperature); } reset_pid_controller(params); @@ -695,11 +693,11 @@ static void power_allocator_unbind(struct thermal_zone_device *tz) tz->governor_data = NULL; } -static int power_allocator_throttle(struct thermal_zone_device *tz, int trip) +static int power_allocator_throttle(struct thermal_zone_device *tz, int trip_id) { - int ret; - int switch_on_temp, control_temp; struct power_allocator_params *params = tz->governor_data; + struct thermal_trip trip; + int ret; bool update; lockdep_assert_held(&tz->lock); @@ -708,13 +706,12 @@ static int power_allocator_throttle(struct thermal_zone_device *tz, int trip) * We get called for every trip point but we only need to do * our calculations once */ - if (trip != params->trip_max_desired_temperature) + if (trip_id != params->trip_max_desired_temperature) return 0; - ret = tz->ops->get_trip_temp(tz, params->trip_switch_on, - &switch_on_temp); - if (!ret && (tz->temperature < switch_on_temp)) { - update = (tz->last_temperature >= switch_on_temp); + ret = thermal_zone_get_trip(tz, params->trip_switch_on, &trip); + if (!ret && (tz->temperature < trip.temperature)) { + update = (tz->last_temperature >= trip.temperature); tz->passive = 0; reset_pid_controller(params); allow_maximum_power(tz, update); @@ -723,16 +720,14 @@ static int power_allocator_throttle(struct thermal_zone_device *tz, int trip) tz->passive = 1; - ret = tz->ops->get_trip_temp(tz, params->trip_max_desired_temperature, - &control_temp); + ret = thermal_zone_get_trip(tz, params->trip_max_desired_temperature, &trip); if (ret) { - dev_warn(&tz->device, - "Failed to get the maximum desired temperature: %d\n", + dev_warn(&tz->device, "Failed to get the maximum desired temperature: %d\n", ret); return ret; } - return allocate_power(tz, control_temp); + return allocate_power(tz, trip.temperature); } static struct thermal_governor thermal_gov_power_allocator = { diff --git a/drivers/thermal/gov_step_wise.c b/drivers/thermal/gov_step_wise.c index cdd3354bc27f..3cb16d7e65d1 100644 --- a/drivers/thermal/gov_step_wise.c +++ b/drivers/thermal/gov_step_wise.c @@ -95,30 +95,28 @@ static void update_passive_instance(struct thermal_zone_device *tz, tz->passive += value; } -static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip) +static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip_id) { - int trip_temp; - enum thermal_trip_type trip_type; enum thermal_trend trend; struct thermal_instance *instance; + struct thermal_trip trip; bool throttle = false; int old_target; - tz->ops->get_trip_temp(tz, trip, &trip_temp); - tz->ops->get_trip_type(tz, trip, &trip_type); + thermal_zone_get_trip(tz, trip_id, &trip); - trend = get_tz_trend(tz, trip); + trend = get_tz_trend(tz, trip_id); - if (tz->temperature >= trip_temp) { + if (tz->temperature >= trip.temperature) { throttle = true; - trace_thermal_zone_trip(tz, trip, trip_type); + trace_thermal_zone_trip(tz, trip_id, trip.type); } dev_dbg(&tz->device, "Trip%d[type=%d,temp=%d]:trend=%d,throttle=%d\n", - trip, trip_type, trip_temp, trend, throttle); + trip_id, trip.type, trip.temperature, trend, throttle); list_for_each_entry(instance, &tz->thermal_instances, tz_node) { - if (instance->trip != trip) + if (instance->trip != trip_id) continue; old_target = instance->target; @@ -132,11 +130,11 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip) /* Activate a passive thermal instance */ if (old_target == THERMAL_NO_TARGET && instance->target != THERMAL_NO_TARGET) - update_passive_instance(tz, trip_type, 1); + update_passive_instance(tz, trip.type, 1); /* Deactivate a passive thermal instance */ else if (old_target != THERMAL_NO_TARGET && instance->target == THERMAL_NO_TARGET) - update_passive_instance(tz, trip_type, -1); + update_passive_instance(tz, trip.type, -1); instance->initialized = true; mutex_lock(&instance->cdev->lock);
The governors are using the ops->get_trip_* functions, Replace these calls with thermal_zone_get_trip(). Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> --- drivers/thermal/gov_bang_bang.c | 23 +++++------- drivers/thermal/gov_fair_share.c | 18 ++++------ drivers/thermal/gov_power_allocator.c | 51 ++++++++++++--------------- drivers/thermal/gov_step_wise.c | 22 ++++++------ 4 files changed, 47 insertions(+), 67 deletions(-)