diff mbox series

[04/15] rt2x00: add RF self TXDC calibration for MT7620

Message ID YyUBN0F9t8GfTEQ3@makrotopia.org
State Superseded
Headers show
Series [RESEND,01/15] rt2x00: define RF5592 in init_eeprom routine | expand

Commit Message

Daniel Golle Sept. 16, 2022, 11:05 p.m. UTC 
From: Tomislav Požega <pozega.tomislav@gmail.com>

Add TX self calibration based on mtk driver.

Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
---
 .../net/wireless/ralink/rt2x00/rt2800lib.c    | 48 +++++++++++++++++++
 1 file changed, 48 insertions(+)

Comments

Stanislaw Gruszka Sept. 17, 2022, 12:34 p.m. UTC | #1 
On Sat, Sep 17, 2022 at 12:05:27AM +0100, Daniel Golle wrote:
> From: Tomislav Požega <pozega.tomislav@gmail.com>
> 
> Add TX self calibration based on mtk driver.
> 
> Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>

Daniel, this needs your Signed-off-by,

Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>

> +	rt2800_rfcsr_write_bank(rt2x00dev, 5, 1, 0x4);
> +	for (i = 0; i < 100; i = i + 1) {

Why not i++ ? :-) 
>
Daniel Golle Sept. 17, 2022, 12:37 p.m. UTC | #2 
On Sat, Sep 17, 2022 at 02:34:40PM +0200, Stanislaw Gruszka wrote:
> On Sat, Sep 17, 2022 at 12:05:27AM +0100, Daniel Golle wrote:
> > From: Tomislav Požega <pozega.tomislav@gmail.com>
> > 
> > Add TX self calibration based on mtk driver.
> > 
> > Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
> 
> Daniel, this needs your Signed-off-by,
> 
> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
> 
> > +	rt2800_rfcsr_write_bank(rt2x00dev, 5, 1, 0x4);
> > +	for (i = 0; i < 100; i = i + 1) {
> 
> Why not i++ ? :-) 

or even ++i. I'll fix that in v2.
diff mbox series

Patch

diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
index b34453bd87174f..d8b7f90c05c42b 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -8435,6 +8435,53 @@  static void rt2800_init_rfcsr_5592(struct rt2x00_dev *rt2x00dev)
 	rt2800_led_open_drain_enable(rt2x00dev);
 }
 
+static void rt2800_rf_self_txdc_cal(struct rt2x00_dev *rt2x00dev)
+{
+	u8 rfb5r1_org, rfb7r1_org, rfvalue;
+	u32 mac0518, mac051c, mac0528, mac052c;
+	u8 i;
+
+	mac0518 = rt2800_register_read(rt2x00dev, RF_CONTROL0);
+	mac051c = rt2800_register_read(rt2x00dev, RF_BYPASS0);
+	mac0528 = rt2800_register_read(rt2x00dev, RF_CONTROL2);
+	mac052c = rt2800_register_read(rt2x00dev, RF_BYPASS2);
+
+	rt2800_register_write(rt2x00dev, RF_BYPASS0, 0x0);
+	rt2800_register_write(rt2x00dev, RF_BYPASS2, 0x0);
+
+	rt2800_register_write(rt2x00dev, RF_CONTROL0, 0xC);
+	rt2800_register_write(rt2x00dev, RF_BYPASS0, 0x3306);
+	rt2800_register_write(rt2x00dev, RF_CONTROL2, 0x3330);
+	rt2800_register_write(rt2x00dev, RF_BYPASS2, 0xfffff);
+	rfb5r1_org = rt2800_rfcsr_read_bank(rt2x00dev, 5, 1);
+	rfb7r1_org = rt2800_rfcsr_read_bank(rt2x00dev, 7, 1);
+
+	rt2800_rfcsr_write_bank(rt2x00dev, 5, 1, 0x4);
+	for (i = 0; i < 100; i = i + 1) {
+		usleep_range(50, 100);
+		rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 5, 1);
+		if ((rfvalue & 0x04) != 0x4)
+			break;
+	}
+	rt2800_rfcsr_write_bank(rt2x00dev, 5, 1, rfb5r1_org);
+
+	rt2800_rfcsr_write_bank(rt2x00dev, 7, 1, 0x4);
+	for (i = 0; i < 100; i = i + 1) {
+		usleep_range(50, 100);
+		rfvalue = rt2800_rfcsr_read_bank(rt2x00dev, 7, 1);
+		if ((rfvalue & 0x04) != 0x4)
+			break;
+	}
+	rt2800_rfcsr_write_bank(rt2x00dev, 7, 1, rfb7r1_org);
+
+	rt2800_register_write(rt2x00dev, RF_BYPASS0, 0x0);
+	rt2800_register_write(rt2x00dev, RF_BYPASS2, 0x0);
+	rt2800_register_write(rt2x00dev, RF_CONTROL0, mac0518);
+	rt2800_register_write(rt2x00dev, RF_BYPASS0, mac051c);
+	rt2800_register_write(rt2x00dev, RF_CONTROL2, mac0528);
+	rt2800_register_write(rt2x00dev, RF_BYPASS2, mac052c);
+}
+
 static void rt2800_bbp_core_soft_reset(struct rt2x00_dev *rt2x00dev,
 				       bool set_bw, bool is_ht40)
 {
@@ -9042,6 +9089,7 @@  static void rt2800_init_rfcsr_6352(struct rt2x00_dev *rt2x00dev)
 	rt2800_rfcsr_write_dccal(rt2x00dev, 5, 0x00);
 	rt2800_rfcsr_write_dccal(rt2x00dev, 17, 0x7C);
 
+	rt2800_rf_self_txdc_cal(rt2x00dev);
 	rt2800_bw_filter_calibration(rt2x00dev, true);
 	rt2800_bw_filter_calibration(rt2x00dev, false);
 }