diff mbox series

[v5,1/3] dt-bindings: power: supply: Add Richtek RT9471 battery charger

Message ID 1663173015-7934-2-git-send-email-u0084500@gmail.com
State Superseded
Headers show
Series Add Richtek RT9471 3A battery charger support | expand

Commit Message

cy_huang Sept. 14, 2022, 4:30 p.m. UTC
From: ChiYuan Huang <cy_huang@richtek.com>

Add bindings for the Richtek RT9471 I2C controlled battery charger.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Co-developed-by: Alina Yu <alina_yu@richtek.com>
Signed-off-by: Alina Yu <alina_yu@richtek.com>
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
---
Since v3
- Move unevaluatedProperties line after $ref for binding patch.
- Add Reviewed-by tag for binding patch.

Since v2
- Remove the properties for interrupt controller things in the binding documentation.
- Fix dtc error for typo, it's 'regulator-name', not 'regulator-compatible'.
- Add regulator min/max microamp to allow otg vbus current adjustable in example.
- Specify the active-level for charge-enable-gpios in binding example.

---
 .../bindings/power/supply/richtek,rt9471.yaml      | 73 ++++++++++++++++++++++
 1 file changed, 73 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/supply/richtek,rt9471.yaml

Comments

Krzysztof Kozlowski Sept. 15, 2022, 9:51 a.m. UTC | #1
On Thu, 15 Sep 2022 00:30:13 +0800, cy_huang wrote:
> From: ChiYuan Huang <cy_huang@richtek.com>
> 
> Add bindings for the Richtek RT9471 I2C controlled battery charger.
> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Co-developed-by: Alina Yu <alina_yu@richtek.com>
> Signed-off-by: Alina Yu <alina_yu@richtek.com>
> Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
> ---
> Since v3
> - Move unevaluatedProperties line after $ref for binding patch.
> - Add Reviewed-by tag for binding patch.
> 
> Since v2
> - Remove the properties for interrupt controller things in the binding documentation.
> - Fix dtc error for typo, it's 'regulator-name', not 'regulator-compatible'.
> - Add regulator min/max microamp to allow otg vbus current adjustable in example.
> - Specify the active-level for charge-enable-gpios in binding example.
> 
> ---
>  .../bindings/power/supply/richtek,rt9471.yaml      | 73 ++++++++++++++++++++++
>  1 file changed, 73 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/power/supply/richtek,rt9471.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/renesas,rzn1-dmamux.example.dtb: dma-router@a0: dma-masters:0: [4294967295, 4294967295] is too long
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/renesas,rzn1-dmamux.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/renesas,rzn1-dmamux.example.dtb: dma-router@a0: dma-masters:0: [4294967295, 4294967295] is too long
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/dma-router.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/st,stm32-dmamux.example.dtb: dma-router@40020800: dma-masters:0: [4294967295, 4294967295] is too long
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/dma-router.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/st,stm32-dmamux.example.dtb: dma-router@40020800: dma-masters:0: [4294967295, 4294967295] is too long
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/st,stm32-dmamux.example.dtb: dma-router@40020800: Unevaluated properties are not allowed ('dma-channels', 'dma-masters', 'dma-requests' were unexpected)
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.
Rob Herring (Arm) Sept. 15, 2022, 11:59 a.m. UTC | #2
On Thu, Sep 15, 2022 at 10:51:21AM +0100, Krzysztof Kozlowski wrote:
> On Thu, 15 Sep 2022 00:30:13 +0800, cy_huang wrote:
> > From: ChiYuan Huang <cy_huang@richtek.com>
> > 
> > Add bindings for the Richtek RT9471 I2C controlled battery charger.
> > 
> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> > Co-developed-by: Alina Yu <alina_yu@richtek.com>
> > Signed-off-by: Alina Yu <alina_yu@richtek.com>
> > Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
> > ---
> > Since v3
> > - Move unevaluatedProperties line after $ref for binding patch.
> > - Add Reviewed-by tag for binding patch.
> > 
> > Since v2
> > - Remove the properties for interrupt controller things in the binding documentation.
> > - Fix dtc error for typo, it's 'regulator-name', not 'regulator-compatible'.
> > - Add regulator min/max microamp to allow otg vbus current adjustable in example.
> > - Specify the active-level for charge-enable-gpios in binding example.
> > 
> > ---
> >  .../bindings/power/supply/richtek,rt9471.yaml      | 73 ++++++++++++++++++++++
> >  1 file changed, 73 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/power/supply/richtek,rt9471.yaml
> > 
> 
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/renesas,rzn1-dmamux.example.dtb: dma-router@a0: dma-masters:0: [4294967295, 4294967295] is too long
> 	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/renesas,rzn1-dmamux.yaml
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/renesas,rzn1-dmamux.example.dtb: dma-router@a0: dma-masters:0: [4294967295, 4294967295] is too long
> 	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/dma-router.yaml
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/st,stm32-dmamux.example.dtb: dma-router@40020800: dma-masters:0: [4294967295, 4294967295] is too long
> 	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/dma-router.yaml
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/st,stm32-dmamux.example.dtb: dma-router@40020800: dma-masters:0: [4294967295, 4294967295] is too long
> 	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/st,stm32-dmamux.example.dtb: dma-router@40020800: Unevaluated properties are not allowed ('dma-channels', 'dma-masters', 'dma-requests' were unexpected)
> 	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml

Ignore this. Unrelated.

Rob
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt9471.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt9471.yaml
new file mode 100644
index 00000000..fbb54cf
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/richtek,rt9471.yaml
@@ -0,0 +1,73 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/richtek,rt9471.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT9471 3A Single Cell Switching Battery charger
+
+maintainers:
+  - Alina Yu <alina_yu@richtek.com>
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  RT9471 is a switch-mode single cell Li-Ion/Li-Polymer battery charger for
+  portable applications. It supports USB BC1.2 port detection, current and
+  voltage regulations in both charging and boost mode.
+
+  Datasheet is available at
+  https://www.richtek.com/assets/product_file/RT9471=RT9471D/DS9471D-02.pdf
+
+properties:
+  compatible:
+    const: richtek,rt9471
+
+  reg:
+    maxItems: 1
+
+  charge-enable-gpios:
+    description: GPIO used to turn on and off charging.
+    maxItems: 1
+
+  wakeup-source: true
+
+  interrupts:
+    maxItems: 1
+
+  usb-otg-vbus-regulator:
+    type: object
+    $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - wakeup-source
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      charger@53 {
+        compatible = "richtek,rt9471";
+        reg = <0x53>;
+        charge-enable-gpios = <&gpio26 1 GPIO_ACTIVE_LOW>;
+        wakeup-source;
+        interrupts-extended = <&gpio_intc 32 IRQ_TYPE_EDGE_FALLING>;
+
+        usb-otg-vbus-regulator {
+          regulator-name = "usb-otg-vbus";
+          regulator-min-microvolt = <4850000>;
+          regulator-max-microvolt = <5300000>;
+          regulator-min-microamp = <500000>;
+          regulator-max-microamp = <1200000>;
+        };
+      };
+    };