diff mbox series

[1/5] arm64: dts: qcom: pmi8994: add missing MPP compatible fallback

Message ID 20220908081050.29751-1-krzysztof.kozlowski@linaro.org
State Accepted
Commit 8cd012f75178c4dffe8df692aa991e829286a8d4
Headers show
Series [1/5] arm64: dts: qcom: pmi8994: add missing MPP compatible fallback | expand

Commit Message

Krzysztof Kozlowski Sept. 8, 2022, 8:10 a.m. UTC
Bindings require usage of generic MPP fallback in compatible:

  qcom/apq8094-sony-xperia-kitakami-karin_windy.dtb: pmic@2: mpps@a000:compatible: ['qcom,pmi8994-mpp'] is too short

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/pmi8994.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Bjorn Andersson Sept. 15, 2022, 3:36 a.m. UTC | #1
On Thu, 8 Sep 2022 10:10:46 +0200, Krzysztof Kozlowski wrote:
> Bindings require usage of generic MPP fallback in compatible:
> 
>   qcom/apq8094-sony-xperia-kitakami-karin_windy.dtb: pmic@2: mpps@a000:compatible: ['qcom,pmi8994-mpp'] is too short
> 
> 

Applied, thanks!

[1/5] arm64: dts: qcom: pmi8994: add missing MPP compatible fallback
      commit: 8cd012f75178c4dffe8df692aa991e829286a8d4
[2/5] arm64: dts: qcom: msm8994-msft-lumia-octagon: align resin node name with bindings
      commit: 308ff92e77aa2febec9b81b6917ebb0f38da8cb5
[3/5] arm64: dts: qcom: msm8996-xiaomi: align PMIC GPIO pin configuration with DT schema
      commit: b94d7c1fc7c6ac4e2ce83e9fc6a84fc3034b631c
[4/5] arm64: dts: qcom: sa8295p-adp: add fallback compatible to PMIC GPIOs
      commit: afa774bc17e607ef98cc660657cf5208a39591a2
[5/5] arm64: dts: qcom: sa8295p-adp: add missing gpio-ranges in PMIC GPIOs
      commit: aa510b0c1fa34338babbde366b2c98b9b39aa282

Best regards,
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/pmi8994.dtsi b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
index 92a139ca4482..a0af91698d49 100644
--- a/arch/arm64/boot/dts/qcom/pmi8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
@@ -21,7 +21,7 @@  pmi8994_gpios: gpio@c000 {
 		};
 
 		pmi8994_mpps: mpps@a000 {
-			compatible = "qcom,pmi8994-mpp";
+			compatible = "qcom,pmi8994-mpp", "qcom,spmi-mpp";
 			reg = <0xa000>;
 			gpio-controller;
 			gpio-ranges = <&pmi8994_mpps 0 0 4>;