| Message ID | 20220902160845.v5.2.I7dd7a79c4cc5fe91c3feb004473feb3b34b7b2d8@changeid |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add a new board device tree named 'evoker' for herobrine variant. | expand |
On 2.09.2022 10:09, Sheng-Liang Pan wrote: > Add a basic device tree for the herobrine evoker board. > > Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> > --- > > Changes in v5: > - Got the version number correct > > arch/arm64/boot/dts/qcom/Makefile | 1 + > .../dts/qcom/sc7280-herobrine-evoker-r0.dts | 333 ++++++++++++++++++ > 2 files changed, 334 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dts > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index 1d86a33de528c..dd18ae8cd81c2 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -101,6 +101,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dtb > dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1.dtb > dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb > dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-crd.dtb > +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-evoker-r0.dtb > dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-herobrine-r1.dtb > dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r0.dtb > dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb > diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dts > new file mode 100644 > index 0000000000000..ccbe50b6249ab > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dts > @@ -0,0 +1,333 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Google Evoker board device tree source > + * > + * Copyright 2022 Google LLC. > + */ > + > +/dts-v1/; > + > +#include "sc7280-herobrine.dtsi" > + > +/ { > + model = "Google Evoker"; > + compatible = "google,evoker", "qcom,sc7280"; > +}; > + > +/* > + * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES > + * > + * Sort order matches the order in the parent files (parents before children). > + */ > + > +&pp3300_codec { > + status = "okay"; > +}; > + > +/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ > + > +ap_tp_i2c: &i2c0 { > + status = "okay"; > + clock-frequency = <400000>; > + > + trackpad: trackpad@2c { > + compatible = "hid-over-i2c"; > + reg = <0x2c>; > + pinctrl-names = "default"; > + pinctrl-0 = <&tp_int_odl>; > + > + interrupt-parent = <&tlmm>; > + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; > + > + hid-descr-addr = <0x20>; > + vcc-supply = <&pp3300_z1>; > + > + wakeup-source; > + }; > +}; > + > +ts_i2c: &i2c13 { > + status = "okay"; > + clock-frequency = <400000>; > + > + ap_ts: touchscreen@10 { > + compatible = "elan,ekth6915"; > + reg = <0x10>; > + pinctrl-names = "default"; > + pinctrl-0 = <&ts_int_conn>, <&ts_rst_conn>; > + > + interrupt-parent = <&tlmm>; > + interrupts = <55 IRQ_TYPE_LEVEL_LOW>; > + > + reset-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>; > + > + vcc33-supply = <&ts_avdd>; > + }; > +}; > + > +&ap_sar_sensor_i2c { > + status = "okay"; > +}; > + > +&ap_sar_sensor0 { > + status = "okay"; > +}; > + > +&ap_sar_sensor1 { > + status = "okay"; > +}; > + > +&mdss_edp { > + status = "okay"; > +}; > + > +&mdss_edp_phy { > + status = "okay"; > +}; > + > +/* For nvme */ > +&pcie1 { > + status = "okay"; > +}; > + > +/* For nvme */ One "for nvme" comment seems enough, given the bus controller and phy are named almost identically, but that's rather a nit. Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Konrad > +&pcie1_phy { > + status = "okay"; > +}; > + > +&pwmleds { > + status = "okay"; > +}; > + > +/* For eMMC */ > +&sdhc_1 { > + status = "okay"; > +}; > + > +/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */ > + > +&ts_rst_conn { > + bias-disable; > +}; > + > +/* PINCTRL - BOARD-SPECIFIC */ > + > +/* > + * Methodology for gpio-line-names: > + * - If a pin goes to herobrine board and is named it gets that name. > + * - If a pin goes to herobrine board and is not named, it gets no name. > + * - If a pin is totally internal to Qcard then it gets Qcard name. > + * - If a pin is not hooked up on Qcard, it gets no name. > + */ > + > +&pm8350c_gpios { > + gpio-line-names = "FLASH_STROBE_1", /* 1 */ > + "AP_SUSPEND", > + "PM8008_1_RST_N", > + "", > + "", > + "", > + "PMIC_EDP_BL_EN", > + "PMIC_EDP_BL_PWM", > + ""; > +}; > + > +&tlmm { > + gpio-line-names = "AP_TP_I2C_SDA", /* 0 */ > + "AP_TP_I2C_SCL", > + "SSD_RST_L", > + "PE_WAKE_ODL", > + "AP_SAR_SDA", > + "AP_SAR_SCL", > + "PRB_SC_GPIO_6", > + "TP_INT_ODL", > + "HP_I2C_SDA", > + "HP_I2C_SCL", > + > + "GNSS_L1_EN", /* 10 */ > + "GNSS_L5_EN", > + "SPI_AP_MOSI", > + "SPI_AP_MISO", > + "SPI_AP_CLK", > + "SPI_AP_CS0_L", > + /* > + * AP_FLASH_WP is crossystem ABI. Schematics > + * call it BIOS_FLASH_WP_OD. > + */ > + "AP_FLASH_WP", > + "", > + "AP_EC_INT_L", > + "", > + > + "UF_CAM_RST_L", /* 20 */ > + "WF_CAM_RST_L", > + "UART_AP_TX_DBG_RX", > + "UART_DBG_TX_AP_RX", > + "", > + "PM8008_IRQ_1", > + "HOST2WLAN_SOL", > + "WLAN2HOST_SOL", > + "MOS_BT_UART_CTS", > + "MOS_BT_UART_RFR", > + > + "MOS_BT_UART_TX", /* 30 */ > + "MOS_BT_UART_RX", > + "PRB_SC_GPIO_32", > + "HUB_RST_L", > + "", > + "", > + "AP_SPI_FP_MISO", > + "AP_SPI_FP_MOSI", > + "AP_SPI_FP_CLK", > + "AP_SPI_FP_CS_L", > + > + "AP_EC_SPI_MISO", /* 40 */ > + "AP_EC_SPI_MOSI", > + "AP_EC_SPI_CLK", > + "AP_EC_SPI_CS_L", > + "LCM_RST_L", > + "EARLY_EUD_N", > + "", > + "DP_HOT_PLUG_DET", > + "IO_BRD_MLB_ID0", > + "IO_BRD_MLB_ID1", > + > + "IO_BRD_MLB_ID2", /* 50 */ > + "SSD_EN", > + "TS_I2C_SDA_CONN", > + "TS_I2C_CLK_CONN", > + "TS_RST_CONN", > + "TS_INT_CONN", > + "AP_I2C_TPM_SDA", > + "AP_I2C_TPM_SCL", > + "PRB_SC_GPIO_58", > + "PRB_SC_GPIO_59", > + > + "EDP_HOT_PLUG_DET_N", /* 60 */ > + "FP_TO_AP_IRQ_L", > + "", > + "AMP_EN", > + "CAM0_MCLK_GPIO_64", > + "CAM1_MCLK_GPIO_65", > + "WF_CAM_MCLK", > + "PRB_SC_GPIO_67", > + "FPMCU_BOOT0", > + "UF_CAM_SDA", > + > + "UF_CAM_SCL", /* 70 */ > + "", > + "", > + "WF_CAM_SDA", > + "WF_CAM_SCL", > + "", > + "", > + "EN_FP_RAILS", > + "FP_RST_L", > + "PCIE1_CLKREQ_ODL", > + > + "EN_PP3300_DX_EDP", /* 80 */ > + "SC_GPIO_81", > + "FORCED_USB_BOOT", > + "WCD_RESET_N", > + "MOS_WLAN_EN", > + "MOS_BT_EN", > + "MOS_SW_CTRL", > + "MOS_PCIE0_RST", > + "MOS_PCIE0_CLKREQ_N", > + "MOS_PCIE0_WAKE_N", > + > + "MOS_LAA_AS_EN", /* 90 */ > + "SD_CD_ODL", > + "", > + "", > + "MOS_BT_WLAN_SLIMBUS_CLK", > + "MOS_BT_WLAN_SLIMBUS_DAT0", > + "HP_MCLK", > + "HP_BCLK", > + "HP_DOUT", > + "HP_DIN", > + > + "HP_LRCLK", /* 100 */ > + "HP_IRQ", > + "", > + "", > + "GSC_AP_INT_ODL", > + "EN_PP3300_CODEC", > + "AMP_BCLK", > + "AMP_DIN", > + "AMP_LRCLK", > + "UIM1_DATA_GPIO_109", > + > + "UIM1_CLK_GPIO_110", /* 110 */ > + "UIM1_RESET_GPIO_111", > + "PRB_SC_GPIO_112", > + "UIM0_DATA", > + "UIM0_CLK", > + "UIM0_RST", > + "UIM0_PRESENT_ODL", > + "SDM_RFFE0_CLK", > + "SDM_RFFE0_DATA", > + "WF_CAM_EN", > + > + "FASTBOOT_SEL_0", /* 120 */ > + "SC_GPIO_121", > + "FASTBOOT_SEL_1", > + "SC_GPIO_123", > + "FASTBOOT_SEL_2", > + "SM_RFFE4_CLK_GRFC_8", > + "SM_RFFE4_DATA_GRFC_9", > + "WLAN_COEX_UART1_RX", > + "WLAN_COEX_UART1_TX", > + "PRB_SC_GPIO_129", > + > + "LCM_ID0", /* 130 */ > + "LCM_ID1", > + "", > + "SDR_QLINK_REQ", > + "SDR_QLINK_EN", > + "QLINK0_WMSS_RESET_N", > + "SMR526_QLINK1_REQ", > + "SMR526_QLINK1_EN", > + "SMR526_QLINK1_WMSS_RESET_N", > + "PRB_SC_GPIO_139", > + > + "SAR1_IRQ_ODL", /* 140 */ > + "SAR0_IRQ_ODL", > + "PRB_SC_GPIO_142", > + "", > + "WCD_SWR_TX_CLK", > + "WCD_SWR_TX_DATA0", > + "WCD_SWR_TX_DATA1", > + "WCD_SWR_RX_CLK", > + "WCD_SWR_RX_DATA0", > + "WCD_SWR_RX_DATA1", > + > + "DMIC01_CLK", /* 150 */ > + "DMIC01_DATA", > + "DMIC23_CLK", > + "DMIC23_DATA", > + "", > + "", > + "EC_IN_RW_ODL", > + "HUB_EN", > + "WCD_SWR_TX_DATA2", > + "", > + > + "", /* 160 */ > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + "", > + > + "", /* 170 */ > + "MOS_BLE_UART_TX", > + "MOS_BLE_UART_RX", > + "", > + "", > + ""; > +};
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 1d86a33de528c..dd18ae8cd81c2 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -101,6 +101,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-crd.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-evoker-r0.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-herobrine-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r0.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dts new file mode 100644 index 0000000000000..ccbe50b6249ab --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dts @@ -0,0 +1,333 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Evoker board device tree source + * + * Copyright 2022 Google LLC. + */ + +/dts-v1/; + +#include "sc7280-herobrine.dtsi" + +/ { + model = "Google Evoker"; + compatible = "google,evoker", "qcom,sc7280"; +}; + +/* + * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES + * + * Sort order matches the order in the parent files (parents before children). + */ + +&pp3300_codec { + status = "okay"; +}; + +/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ + +ap_tp_i2c: &i2c0 { + status = "okay"; + clock-frequency = <400000>; + + trackpad: trackpad@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + pinctrl-names = "default"; + pinctrl-0 = <&tp_int_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + + hid-descr-addr = <0x20>; + vcc-supply = <&pp3300_z1>; + + wakeup-source; + }; +}; + +ts_i2c: &i2c13 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@10 { + compatible = "elan,ekth6915"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_conn>, <&ts_rst_conn>; + + interrupt-parent = <&tlmm>; + interrupts = <55 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>; + + vcc33-supply = <&ts_avdd>; + }; +}; + +&ap_sar_sensor_i2c { + status = "okay"; +}; + +&ap_sar_sensor0 { + status = "okay"; +}; + +&ap_sar_sensor1 { + status = "okay"; +}; + +&mdss_edp { + status = "okay"; +}; + +&mdss_edp_phy { + status = "okay"; +}; + +/* For nvme */ +&pcie1 { + status = "okay"; +}; + +/* For nvme */ +&pcie1_phy { + status = "okay"; +}; + +&pwmleds { + status = "okay"; +}; + +/* For eMMC */ +&sdhc_1 { + status = "okay"; +}; + +/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */ + +&ts_rst_conn { + bias-disable; +}; + +/* PINCTRL - BOARD-SPECIFIC */ + +/* + * Methodology for gpio-line-names: + * - If a pin goes to herobrine board and is named it gets that name. + * - If a pin goes to herobrine board and is not named, it gets no name. + * - If a pin is totally internal to Qcard then it gets Qcard name. + * - If a pin is not hooked up on Qcard, it gets no name. + */ + +&pm8350c_gpios { + gpio-line-names = "FLASH_STROBE_1", /* 1 */ + "AP_SUSPEND", + "PM8008_1_RST_N", + "", + "", + "", + "PMIC_EDP_BL_EN", + "PMIC_EDP_BL_PWM", + ""; +}; + +&tlmm { + gpio-line-names = "AP_TP_I2C_SDA", /* 0 */ + "AP_TP_I2C_SCL", + "SSD_RST_L", + "PE_WAKE_ODL", + "AP_SAR_SDA", + "AP_SAR_SCL", + "PRB_SC_GPIO_6", + "TP_INT_ODL", + "HP_I2C_SDA", + "HP_I2C_SCL", + + "GNSS_L1_EN", /* 10 */ + "GNSS_L5_EN", + "SPI_AP_MOSI", + "SPI_AP_MISO", + "SPI_AP_CLK", + "SPI_AP_CS0_L", + /* + * AP_FLASH_WP is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_OD. + */ + "AP_FLASH_WP", + "", + "AP_EC_INT_L", + "", + + "UF_CAM_RST_L", /* 20 */ + "WF_CAM_RST_L", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "", + "PM8008_IRQ_1", + "HOST2WLAN_SOL", + "WLAN2HOST_SOL", + "MOS_BT_UART_CTS", + "MOS_BT_UART_RFR", + + "MOS_BT_UART_TX", /* 30 */ + "MOS_BT_UART_RX", + "PRB_SC_GPIO_32", + "HUB_RST_L", + "", + "", + "AP_SPI_FP_MISO", + "AP_SPI_FP_MOSI", + "AP_SPI_FP_CLK", + "AP_SPI_FP_CS_L", + + "AP_EC_SPI_MISO", /* 40 */ + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "LCM_RST_L", + "EARLY_EUD_N", + "", + "DP_HOT_PLUG_DET", + "IO_BRD_MLB_ID0", + "IO_BRD_MLB_ID1", + + "IO_BRD_MLB_ID2", /* 50 */ + "SSD_EN", + "TS_I2C_SDA_CONN", + "TS_I2C_CLK_CONN", + "TS_RST_CONN", + "TS_INT_CONN", + "AP_I2C_TPM_SDA", + "AP_I2C_TPM_SCL", + "PRB_SC_GPIO_58", + "PRB_SC_GPIO_59", + + "EDP_HOT_PLUG_DET_N", /* 60 */ + "FP_TO_AP_IRQ_L", + "", + "AMP_EN", + "CAM0_MCLK_GPIO_64", + "CAM1_MCLK_GPIO_65", + "WF_CAM_MCLK", + "PRB_SC_GPIO_67", + "FPMCU_BOOT0", + "UF_CAM_SDA", + + "UF_CAM_SCL", /* 70 */ + "", + "", + "WF_CAM_SDA", + "WF_CAM_SCL", + "", + "", + "EN_FP_RAILS", + "FP_RST_L", + "PCIE1_CLKREQ_ODL", + + "EN_PP3300_DX_EDP", /* 80 */ + "SC_GPIO_81", + "FORCED_USB_BOOT", + "WCD_RESET_N", + "MOS_WLAN_EN", + "MOS_BT_EN", + "MOS_SW_CTRL", + "MOS_PCIE0_RST", + "MOS_PCIE0_CLKREQ_N", + "MOS_PCIE0_WAKE_N", + + "MOS_LAA_AS_EN", /* 90 */ + "SD_CD_ODL", + "", + "", + "MOS_BT_WLAN_SLIMBUS_CLK", + "MOS_BT_WLAN_SLIMBUS_DAT0", + "HP_MCLK", + "HP_BCLK", + "HP_DOUT", + "HP_DIN", + + "HP_LRCLK", /* 100 */ + "HP_IRQ", + "", + "", + "GSC_AP_INT_ODL", + "EN_PP3300_CODEC", + "AMP_BCLK", + "AMP_DIN", + "AMP_LRCLK", + "UIM1_DATA_GPIO_109", + + "UIM1_CLK_GPIO_110", /* 110 */ + "UIM1_RESET_GPIO_111", + "PRB_SC_GPIO_112", + "UIM0_DATA", + "UIM0_CLK", + "UIM0_RST", + "UIM0_PRESENT_ODL", + "SDM_RFFE0_CLK", + "SDM_RFFE0_DATA", + "WF_CAM_EN", + + "FASTBOOT_SEL_0", /* 120 */ + "SC_GPIO_121", + "FASTBOOT_SEL_1", + "SC_GPIO_123", + "FASTBOOT_SEL_2", + "SM_RFFE4_CLK_GRFC_8", + "SM_RFFE4_DATA_GRFC_9", + "WLAN_COEX_UART1_RX", + "WLAN_COEX_UART1_TX", + "PRB_SC_GPIO_129", + + "LCM_ID0", /* 130 */ + "LCM_ID1", + "", + "SDR_QLINK_REQ", + "SDR_QLINK_EN", + "QLINK0_WMSS_RESET_N", + "SMR526_QLINK1_REQ", + "SMR526_QLINK1_EN", + "SMR526_QLINK1_WMSS_RESET_N", + "PRB_SC_GPIO_139", + + "SAR1_IRQ_ODL", /* 140 */ + "SAR0_IRQ_ODL", + "PRB_SC_GPIO_142", + "", + "WCD_SWR_TX_CLK", + "WCD_SWR_TX_DATA0", + "WCD_SWR_TX_DATA1", + "WCD_SWR_RX_CLK", + "WCD_SWR_RX_DATA0", + "WCD_SWR_RX_DATA1", + + "DMIC01_CLK", /* 150 */ + "DMIC01_DATA", + "DMIC23_CLK", + "DMIC23_DATA", + "", + "", + "EC_IN_RW_ODL", + "HUB_EN", + "WCD_SWR_TX_DATA2", + "", + + "", /* 160 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + + "", /* 170 */ + "MOS_BLE_UART_TX", + "MOS_BLE_UART_RX", + "", + "", + ""; +};
Add a basic device tree for the herobrine evoker board. Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> --- Changes in v5: - Got the version number correct arch/arm64/boot/dts/qcom/Makefile | 1 + .../dts/qcom/sc7280-herobrine-evoker-r0.dts | 333 ++++++++++++++++++ 2 files changed, 334 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dts