diff mbox series

usb: core: stop USB enumeration if too many retries

Message ID 20220826075839.292615-1-raychi@google.com
State New
Headers show
Series usb: core: stop USB enumeration if too many retries | expand

Commit Message

Ray Chi Aug. 26, 2022, 7:58 a.m. UTC
If a broken accessory connected to a USB host, usbcore might
keep doing enumeration retries and it will take a long time to
cause system unstable.

This patch provides a quirk to specific USB ports of the hub to
stop USB enumeration if needed.

Signed-off-by: Ray Chi <raychi@google.com>
---
 drivers/usb/core/hub.c | 33 +++++++++++++++++++++++++++++++++
 include/linux/usb.h    |  3 +++
 2 files changed, 36 insertions(+)

Comments

Ray Chi Sept. 2, 2022, 9:28 a.m. UTC | #1
On Tue, Aug 30, 2022 at 8:44 PM Greg KH <gregkh@linuxfoundation.org> wrote:
>
> On Fri, Aug 26, 2022 at 03:58:39PM +0800, Ray Chi wrote:
> > If a broken accessory connected to a USB host, usbcore might
> > keep doing enumeration retries and it will take a long time to
> > cause system unstable.
> >
> > This patch provides a quirk to specific USB ports of the hub to
> > stop USB enumeration if needed.
>
> Where does it ever allow the port to handle new devices in the future if
> the device is removed and then a new one is added back?  Or is the port
> just now dead for forever?
>

I modified the patch according to Alan's suggestion, so the port will
be working again
after clearing the quirk with the v2 patch.

> thanks,
>
> greg k-h

Thanks,
Ray
diff mbox series

Patch

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 2633acde7ac1..0f4097440ffb 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -3081,6 +3081,28 @@  static int hub_port_reset(struct usb_hub *hub, int port1,
 	return status;
 }
 
+/* Stop enumerate if the port met errors and quirk is set */
+static bool hub_port_stop_enumerate(struct usb_hub *hub, int port1, int retries)
+{
+	struct usb_port *port_dev = hub->ports[port1 - 1];
+	struct usb_device *hdev = hub->hdev;
+
+	if (retries < (PORT_INIT_TRIES - 1) / 2)
+		return false;
+
+	/*
+	 * Some USB hosts can't take a long time to keep doing enumeration
+	 * retry. After doing half of the retries, we would turn off the port
+	 * power to stop enumeration if the quirk is set.
+	 */
+	if (port_dev->quirks & USB_PORT_QUIRK_STOP_ENUM) {
+		usb_hub_set_port_power(hdev, hub, port1, false);
+		return true;
+	}
+
+	return false;
+}
+
 /* Check if a port is power on */
 int usb_port_is_power_on(struct usb_hub *hub, unsigned int portstatus)
 {
@@ -4855,6 +4877,9 @@  hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1,
 					buf->bMaxPacketSize0;
 			kfree(buf);
 
+			if (r < 0 && (port_dev->quirks & USB_PORT_QUIRK_STOP_ENUM))
+				goto fail;
+
 			retval = hub_port_reset(hub, port1, udev, delay, false);
 			if (retval < 0)		/* error or disconnect */
 				goto fail;
@@ -5387,6 +5412,9 @@  static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
 		if ((status == -ENOTCONN) || (status == -ENOTSUPP))
 			break;
 
+		if (hub_port_stop_enumerate(hub, port1, i))
+			break;
+
 		/* When halfway through our retry count, power-cycle the port */
 		if (i == (PORT_INIT_TRIES - 1) / 2) {
 			dev_info(&port_dev->dev, "attempt power cycle\n");
@@ -5934,6 +5962,9 @@  static int usb_reset_and_verify_device(struct usb_device *udev)
 		ret = hub_port_init(parent_hub, udev, port1, i);
 		if (ret >= 0 || ret == -ENOTCONN || ret == -ENODEV)
 			break;
+
+		if (hub_port_stop_enumerate(parent_hub, port1, i))
+			goto stop_enumerate;
 	}
 	mutex_unlock(hcd->address0_mutex);
 
@@ -6022,6 +6053,8 @@  static int usb_reset_and_verify_device(struct usb_device *udev)
 	udev->bos = bos;
 	return 0;
 
+stop_enumerate:
+	mutex_unlock(hcd->address0_mutex);
 re_enumerate:
 	usb_release_bos_descriptor(udev);
 	udev->bos = bos;
diff --git a/include/linux/usb.h b/include/linux/usb.h
index f7a9914fc97f..fc0fef58c706 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -490,6 +490,9 @@  enum usb_port_connect_type {
 /* Decrease TRSTRCY to 10ms during device enumeration. */
 #define USB_PORT_QUIRK_FAST_ENUM	BIT(1)
 
+/* Stop the enumeration for the given port if there are too many failures*/
+#define USB_PORT_QUIRK_STOP_ENUM	BIT(2)
+
 /*
  * USB 2.0 Link Power Management (LPM) parameters.
  */