| Message ID | 20220817075517.49575-5-sergiu.moga@microchip.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Make atmel serial driver aware of GCLK | expand |
On 17.08.2022 10:55, Sergiu Moga wrote: > Add the generic clocks for UART/USART in the sama5d2 driver to allow them > to be registered in the Common Clock Framework. > > Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> > --- > drivers/clk/at91/sama5d2.c | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/drivers/clk/at91/sama5d2.c b/drivers/clk/at91/sama5d2.c > index cfd0f5e23b99..84156dc52bff 100644 > --- a/drivers/clk/at91/sama5d2.c > +++ b/drivers/clk/at91/sama5d2.c > @@ -120,6 +120,16 @@ static const struct { > struct clk_range r; > int chg_pid; > } sama5d2_gck[] = { > + { .n = "flx0_gclk", .id = 19, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, > + { .n = "flx1_gclk", .id = 20, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, > + { .n = "flx2_gclk", .id = 21, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, > + { .n = "flx3_gclk", .id = 22, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, > + { .n = "flx4_gclk", .id = 23, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, > + { .n = "uart0_gclk", .id = 24, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, > + { .n = "uart1_gclk", .id = 25, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, > + { .n = "uart2_gclk", .id = 26, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, > + { .n = "uart3_gclk", .id = 27, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, > + { .n = "uart4_gclk", .id = 28, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, > { .n = "sdmmc0_gclk", .id = 31, .chg_pid = INT_MIN, }, > { .n = "sdmmc1_gclk", .id = 32, .chg_pid = INT_MIN, }, > { .n = "tcb0_gclk", .id = 35, .chg_pid = INT_MIN, .r = { .min = 0, .max = 83000000 }, },
Quoting Sergiu Moga (2022-08-17 00:55:17) > Add the generic clocks for UART/USART in the sama5d2 driver to allow them > to be registered in the Common Clock Framework. > > Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com> > --- Should I pick this up to clk-next or did you want to take it via another tree?
On 31.08.2022 01:23, Stephen Boyd wrote: > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe > > Quoting Sergiu Moga (2022-08-17 00:55:17) >> Add the generic clocks for UART/USART in the sama5d2 driver to allow them >> to be registered in the Common Clock Framework. >> >> Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com> >> --- > > Should I pick this up to clk-next or did you want to take it via another > tree? For me it's OK if it goes though clk-next. Thank you, Claudiu Beznea
diff --git a/drivers/clk/at91/sama5d2.c b/drivers/clk/at91/sama5d2.c index cfd0f5e23b99..84156dc52bff 100644 --- a/drivers/clk/at91/sama5d2.c +++ b/drivers/clk/at91/sama5d2.c @@ -120,6 +120,16 @@ static const struct { struct clk_range r; int chg_pid; } sama5d2_gck[] = { + { .n = "flx0_gclk", .id = 19, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, + { .n = "flx1_gclk", .id = 20, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, + { .n = "flx2_gclk", .id = 21, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, + { .n = "flx3_gclk", .id = 22, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, + { .n = "flx4_gclk", .id = 23, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, + { .n = "uart0_gclk", .id = 24, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, + { .n = "uart1_gclk", .id = 25, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, + { .n = "uart2_gclk", .id = 26, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, + { .n = "uart3_gclk", .id = 27, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, + { .n = "uart4_gclk", .id = 28, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, }, { .n = "sdmmc0_gclk", .id = 31, .chg_pid = INT_MIN, }, { .n = "sdmmc1_gclk", .id = 32, .chg_pid = INT_MIN, }, { .n = "tcb0_gclk", .id = 35, .chg_pid = INT_MIN, .r = { .min = 0, .max = 83000000 }, },
Add the generic clocks for UART/USART in the sama5d2 driver to allow them to be registered in the Common Clock Framework. Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com> --- drivers/clk/at91/sama5d2.c | 10 ++++++++++ 1 file changed, 10 insertions(+)