diff mbox series

[Bluez,v2] adapter: Reset pending settings when receiving MGMT error

Message ID 20220823121541.Bluez.v2.1.I541cbea9d6295f531c796bf3bda96b22db76bc19@changeid
State Superseded
Headers show
Series [Bluez,v2] adapter: Reset pending settings when receiving MGMT error | expand

Commit Message

Archie Pusaka Aug. 23, 2022, 4:15 a.m. UTC 
From: Archie Pusaka <apusaka@chromium.org>

We set the pending settings flag when sending MGMT_SETTING_*
commands to the MGMT layer and clear them when receiving a
successful reply, but we don't clear them when receiving an error
reply. This might cause a setting to be stuck in pending state.

Therefore, also clear the pending flag when receiving error.
Furthermore, this patch also postpones setting the pending flag
until we queue the MGMT command in order to avoid setting it too
soon but we return early.

This was caught during power off test, where MGMT_OP_SET_POWERED
returns Authentication Failed because disconnection takes too long.
Future attempts to switch power will then be ignored.

< HCI Command: Disconnect (0x01|0x0006) plen 3   #17916 [hci0] 12.502908
        Handle: 512
        Reason: Remote Device Terminated due to Power Off (0x15)
> HCI Event: Command Status (0x0f) plen 4        #17917 [hci0] 12.503185
      Disconnect (0x01|0x0006) ncmd 1
        Status: Success (0x00)
@ MGMT Event: Command Status (0x0002) plen 3   {0x0001} [hci0] 14.519491
      Set Powered (0x0005)
        Status: Authentication Failed (0x05)
= bluetoothd: Failed to set mode: Authentication Failed (0x05) 14.520042
= bluetoothd: adapter /org/bluez/hci0 set power to 0           14.813533
> HCI Event: Disconnect Complete (0x05) plen 4   #17918 [hci0] 16.509043
        Status: Success (0x00)
        Handle: 512
        Reason: Connection Timeout (0x08)

Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org>
---

Changes in v2:
* Update commit message with btsnoop log
* Fix memory leak

 src/adapter.c | 39 +++++++++++++++++++++++++++++++--------
 1 file changed, 31 insertions(+), 8 deletions(-)

Comments

patchwork-bot+bluetooth@kernel.org Aug. 24, 2022, 9:40 p.m. UTC | #1 
Hello:

This patch was applied to bluetooth/bluez.git (master)
by Luiz Augusto von Dentz <luiz.von.dentz@intel.com>:

On Tue, 23 Aug 2022 12:15:56 +0800 you wrote:
> From: Archie Pusaka <apusaka@chromium.org>
> 
> We set the pending settings flag when sending MGMT_SETTING_*
> commands to the MGMT layer and clear them when receiving a
> successful reply, but we don't clear them when receiving an error
> reply. This might cause a setting to be stuck in pending state.
> 
> [...]

Here is the summary with links:
  - [Bluez,v2] adapter: Reset pending settings when receiving MGMT error
    https://git.kernel.org/pub/scm/bluetooth/bluez.git/?id=ede7b915980f

You are awesome, thank you!
diff mbox series

Patch

diff --git a/src/adapter.c b/src/adapter.c
index ec26aab1a7..b453e86a03 100644
--- a/src/adapter.c
+++ b/src/adapter.c
@@ -640,14 +640,21 @@  static void new_settings_callback(uint16_t index, uint16_t length,
 	settings_changed(adapter, settings);
 }
 
+struct set_mode_data {
+	struct btd_adapter *adapter;
+	uint32_t setting;
+};
+
 static void set_mode_complete(uint8_t status, uint16_t length,
 					const void *param, void *user_data)
 {
-	struct btd_adapter *adapter = user_data;
+	struct set_mode_data *data = user_data;
+	struct btd_adapter *adapter = data->adapter;
 
 	if (status != MGMT_STATUS_SUCCESS) {
 		btd_error(adapter->dev_id, "Failed to set mode: %s (0x%02x)",
 						mgmt_errstr(status), status);
+		adapter->pending_settings &= ~data->setting;
 		return;
 	}
 
@@ -677,6 +684,7 @@  static bool set_mode(struct btd_adapter *adapter, uint16_t opcode,
 {
 	struct mgmt_mode cp;
 	uint32_t setting = 0;
+	struct set_mode_data *data;
 
 	memset(&cp, 0, sizeof(cp));
 	cp.val = mode;
@@ -699,15 +707,20 @@  static bool set_mode(struct btd_adapter *adapter, uint16_t opcode,
 		break;
 	}
 
-	adapter->pending_settings |= setting;
-
 	DBG("sending set mode command for index %u", adapter->dev_id);
 
+	data = g_new0(struct set_mode_data, 1);
+	data->adapter = adapter;
+	data->setting = setting;
+
 	if (mgmt_send(adapter->mgmt, opcode,
 				adapter->dev_id, sizeof(cp), &cp,
-				set_mode_complete, adapter, NULL) > 0)
+				set_mode_complete, data, g_free) > 0) {
+		adapter->pending_settings |= setting;
 		return true;
+	}
 
+	g_free(data);
 	btd_error(adapter->dev_id, "Failed to set mode for index %u",
 							adapter->dev_id);
 
@@ -718,6 +731,7 @@  static bool set_discoverable(struct btd_adapter *adapter, uint8_t mode,
 							uint16_t timeout)
 {
 	struct mgmt_cp_set_discoverable cp;
+	struct set_mode_data *data;
 
 	memset(&cp, 0, sizeof(cp));
 	cp.val = mode;
@@ -734,11 +748,16 @@  static bool set_discoverable(struct btd_adapter *adapter, uint8_t mode,
 									mode);
 	}
 
+	data = g_new0(struct set_mode_data, 1);
+	data->adapter = adapter;
+	data->setting = 0;
+
 	if (mgmt_send(adapter->mgmt, MGMT_OP_SET_DISCOVERABLE,
 				adapter->dev_id, sizeof(cp), &cp,
-				set_mode_complete, adapter, NULL) > 0)
+				set_mode_complete, data, g_free) > 0)
 		return true;
 
+	g_free(data);
 	btd_error(adapter->dev_id, "Failed to set mode for index %u",
 							adapter->dev_id);
 
@@ -2877,6 +2896,7 @@  static gboolean property_get_mode(struct btd_adapter *adapter,
 
 struct property_set_data {
 	struct btd_adapter *adapter;
+	uint32_t setting;
 	GDBusPendingPropertySet id;
 };
 
@@ -2901,6 +2921,8 @@  static void property_set_mode_complete(uint8_t status, uint16_t length,
 
 		g_dbus_pending_property_error(data->id, dbus_err,
 							mgmt_errstr(status));
+
+		adapter->pending_settings &= ~data->setting;
 		return;
 	}
 
@@ -2969,8 +2991,6 @@  static void property_set_mode(struct btd_adapter *adapter, uint32_t setting,
 
 	mode = (enable == TRUE) ? 0x01 : 0x00;
 
-	adapter->pending_settings |= setting;
-
 	switch (setting) {
 	case MGMT_SETTING_POWERED:
 		opcode = MGMT_OP_SET_POWERED;
@@ -3024,11 +3044,14 @@  static void property_set_mode(struct btd_adapter *adapter, uint32_t setting,
 		goto failed;
 
 	data->adapter = adapter;
+	data->setting = setting;
 	data->id = id;
 
 	if (mgmt_send(adapter->mgmt, opcode, adapter->dev_id, len, param,
-			property_set_mode_complete, data, g_free) > 0)
+			property_set_mode_complete, data, g_free) > 0) {
+		adapter->pending_settings |= setting;
 		return;
+	}
 
 	g_free(data);