| Message ID | 20220727164230.385614-1-krzysztof.kozlowski@linaro.org |
|---|---|
| State | Accepted |
| Commit | e4bb7fee188dab08b7e589fff7616716cdbd5c3b |
| Headers | show |
| Series | dt-bindings: input: ariel-pwrbutton: use spi-peripheral-props.yaml | expand |
On Wed, Jul 27, 2022 at 06:42:30PM +0200, Krzysztof Kozlowski wrote: > Instead of listing directly properties typical for SPI peripherals, > reference the spi-peripheral-props.yaml schema. This allows using all > properties typical for SPI-connected devices, even these which device > bindings author did not tried yet. > > Remove the spi-* properties which now come via spi-peripheral-props.yaml > schema, except for the cases when device schema adds some constraints > like maximum frequency. > > While changing additionalProperties->unevaluatedProperties, put it in > typical place, just before example DTS.a > > The binding references also input.yaml and lists explicitly allowed > properties, thus here reference only spi-peripheral-props.yaml for > purpose of documenting the SPI slave device and bringing > spi-max-frequency type validation. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > Applied, thank you.
On Thu, Jul 28, 2022 at 09:19:42AM -0600, Rob Herring wrote: > On Wed, 27 Jul 2022 18:42:30 +0200, Krzysztof Kozlowski wrote: > > Instead of listing directly properties typical for SPI peripherals, > > reference the spi-peripheral-props.yaml schema. This allows using all > > properties typical for SPI-connected devices, even these which device > > bindings author did not tried yet. > > > > Remove the spi-* properties which now come via spi-peripheral-props.yaml > > schema, except for the cases when device schema adds some constraints > > like maximum frequency. > > > > While changing additionalProperties->unevaluatedProperties, put it in > > typical place, just before example DTS.a > > > > The binding references also input.yaml and lists explicitly allowed > > properties, thus here reference only spi-peripheral-props.yaml for > > purpose of documenting the SPI slave device and bringing > > spi-max-frequency type validation. > > > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > > > --- > > > > Technically, this depends on [1] merged to SPI tree, if we want to > > preserve existing behavior of not allowing SPI CPHA and CPOL in each of > > schemas in this patch. Could we merge this through SPI tree as well? > > > > If this patch comes independently via different tree, the SPI CPHA and > > CPOL will be allowed for brief period of time, before [1] is merged. > > This will not have negative impact, just DT schema checks will be > > loosened for that period. > > > > [1] https://lore.kernel.org/all/20220722191539.90641-2-krzysztof.kozlowski@linaro.org/ > > --- > > Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml | 1 + > > 1 file changed, 1 insertion(+) > > > > Acked-by: Rob Herring <robh@kernel.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
On 11/08/2022 01:57, Dmitry Torokhov wrote: > On Thu, Jul 28, 2022 at 09:19:42AM -0600, Rob Herring wrote: >> On Wed, 27 Jul 2022 18:42:30 +0200, Krzysztof Kozlowski wrote: >>> Instead of listing directly properties typical for SPI peripherals, >>> reference the spi-peripheral-props.yaml schema. This allows using all >>> properties typical for SPI-connected devices, even these which device >>> bindings author did not tried yet. >>> >>> Remove the spi-* properties which now come via spi-peripheral-props.yaml >>> schema, except for the cases when device schema adds some constraints >>> like maximum frequency. >>> >>> While changing additionalProperties->unevaluatedProperties, put it in >>> typical place, just before example DTS.a >>> >>> The binding references also input.yaml and lists explicitly allowed >>> properties, thus here reference only spi-peripheral-props.yaml for >>> purpose of documenting the SPI slave device and bringing >>> spi-max-frequency type validation. >>> >>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> >>> >>> --- >>> >>> Technically, this depends on [1] merged to SPI tree, if we want to >>> preserve existing behavior of not allowing SPI CPHA and CPOL in each of >>> schemas in this patch. > > Could we merge this through SPI tree as well? > >>> >>> If this patch comes independently via different tree, the SPI CPHA and >>> CPOL will be allowed for brief period of time, before [1] is merged. >>> This will not have negative impact, just DT schema checks will be >>> loosened for that period. >>> >>> [1] https://lore.kernel.org/all/20220722191539.90641-2-krzysztof.kozlowski@linaro.org/ >>> --- >>> Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml | 1 + >>> 1 file changed, 1 insertion(+) >>> >> >> Acked-by: Rob Herring <robh@kernel.org> > > Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> > There is no dependency anymore (and actually that time it was not really dependency), so you can take it freely for next cycle. Best regards, Krzysztof
On Thu, Aug 11, 2022 at 09:21:35AM +0300, Krzysztof Kozlowski wrote: > On 11/08/2022 01:57, Dmitry Torokhov wrote: > > On Thu, Jul 28, 2022 at 09:19:42AM -0600, Rob Herring wrote: > >> On Wed, 27 Jul 2022 18:42:30 +0200, Krzysztof Kozlowski wrote: > >>> Instead of listing directly properties typical for SPI peripherals, > >>> reference the spi-peripheral-props.yaml schema. This allows using all > >>> properties typical for SPI-connected devices, even these which device > >>> bindings author did not tried yet. > >>> > >>> Remove the spi-* properties which now come via spi-peripheral-props.yaml > >>> schema, except for the cases when device schema adds some constraints > >>> like maximum frequency. > >>> > >>> While changing additionalProperties->unevaluatedProperties, put it in > >>> typical place, just before example DTS.a > >>> > >>> The binding references also input.yaml and lists explicitly allowed > >>> properties, thus here reference only spi-peripheral-props.yaml for > >>> purpose of documenting the SPI slave device and bringing > >>> spi-max-frequency type validation. > >>> > >>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > >>> > >>> --- > >>> > >>> Technically, this depends on [1] merged to SPI tree, if we want to > >>> preserve existing behavior of not allowing SPI CPHA and CPOL in each of > >>> schemas in this patch. > > > > Could we merge this through SPI tree as well? > > > >>> > >>> If this patch comes independently via different tree, the SPI CPHA and > >>> CPOL will be allowed for brief period of time, before [1] is merged. > >>> This will not have negative impact, just DT schema checks will be > >>> loosened for that period. > >>> > >>> [1] https://lore.kernel.org/all/20220722191539.90641-2-krzysztof.kozlowski@linaro.org/ > >>> --- > >>> Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml | 1 + > >>> 1 file changed, 1 insertion(+) > >>> > >> > >> Acked-by: Rob Herring <robh@kernel.org> > > > > Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> > > > > There is no dependency anymore (and actually that time it was not really > dependency), so you can take it freely for next cycle. Hm, it turns out I already applied it and even included in pull request for Linus. But for some reason my "applied" email was not bcc-ed to me and so I got terribly confused.
diff --git a/Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml b/Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml index b4ad829d7383..442f623bb294 100644 --- a/Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml +++ b/Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml @@ -17,6 +17,7 @@ description: | allOf: - $ref: input.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# properties: compatible:
Instead of listing directly properties typical for SPI peripherals, reference the spi-peripheral-props.yaml schema. This allows using all properties typical for SPI-connected devices, even these which device bindings author did not tried yet. Remove the spi-* properties which now come via spi-peripheral-props.yaml schema, except for the cases when device schema adds some constraints like maximum frequency. While changing additionalProperties->unevaluatedProperties, put it in typical place, just before example DTS.a The binding references also input.yaml and lists explicitly allowed properties, thus here reference only spi-peripheral-props.yaml for purpose of documenting the SPI slave device and bringing spi-max-frequency type validation. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- Technically, this depends on [1] merged to SPI tree, if we want to preserve existing behavior of not allowing SPI CPHA and CPOL in each of schemas in this patch. If this patch comes independently via different tree, the SPI CPHA and CPOL will be allowed for brief period of time, before [1] is merged. This will not have negative impact, just DT schema checks will be loosened for that period. [1] https://lore.kernel.org/all/20220722191539.90641-2-krzysztof.kozlowski@linaro.org/ --- Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml | 1 + 1 file changed, 1 insertion(+)