| Message ID | 20220804131226.16653-3-sreekanth.reddy@broadcom.com |
|---|---|
| State | New |
| Headers | show |
| Series | mpi3mr: Added Support for SAS Transport | expand |
> On Aug 4, 2022, at 6:12 AM, Sreekanth Reddy <sreekanth.reddy@broadcom.com> wrote: > > Added framework to issue config requests commands to > controller firmware. > > Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> > --- > drivers/scsi/mpi3mr/mpi3mr.h | 28 ++++ > drivers/scsi/mpi3mr/mpi3mr_fw.c | 253 ++++++++++++++++++++++++++++++++ > drivers/scsi/mpi3mr/mpi3mr_os.c | 1 + > 3 files changed, 282 insertions(+) > > diff --git a/drivers/scsi/mpi3mr/mpi3mr.h b/drivers/scsi/mpi3mr/mpi3mr.h > index 0935b2e..e15ad0e 100644 > --- a/drivers/scsi/mpi3mr/mpi3mr.h > +++ b/drivers/scsi/mpi3mr/mpi3mr.h > @@ -97,6 +97,7 @@ extern atomic64_t event_counter; > #define MPI3MR_HOSTTAG_PEL_ABORT 3 > #define MPI3MR_HOSTTAG_PEL_WAIT 4 > #define MPI3MR_HOSTTAG_BLK_TMS 5 > +#define MPI3MR_HOSTTAG_CFG_CMDS 6 > > #define MPI3MR_NUM_DEVRMCMD 16 > #define MPI3MR_HOSTTAG_DEVRMCMD_MIN (MPI3MR_HOSTTAG_BLK_TMS + 1) > @@ -126,6 +127,8 @@ extern atomic64_t event_counter; > > #define MPI3MR_WATCHDOG_INTERVAL 1000 /* in milli seconds */ > > +#define MPI3MR_DEFAULT_CFG_PAGE_SZ 1024 /* in bytes */ > + > #define MPI3MR_SCMD_TIMEOUT (60 * HZ) > #define MPI3MR_EH_SCMD_TIMEOUT (60 * HZ) > > @@ -274,6 +277,7 @@ enum mpi3mr_reset_reason { > MPI3MR_RESET_FROM_SYSFS = 23, > MPI3MR_RESET_FROM_SYSFS_TIMEOUT = 24, > MPI3MR_RESET_FROM_FIRMWARE = 27, > + MPI3MR_RESET_FROM_CFG_REQ_TIMEOUT = 29, > }; > > /* Queue type definitions */ > @@ -679,6 +683,21 @@ struct mpi3mr_drv_cmd { > struct mpi3mr_drv_cmd *drv_cmd); > }; > > +/** > + * struct dma_memory_desc - memory descriptor structure to store > + * virtual address, dma address and size for any generic dma > + * memory allocations in the driver. > + * > + * @size: buffer size > + * @addr: virtual address > + * @dma_addr: dma address > + */ > +struct dma_memory_desc { > + u32 size; > + void *addr; > + dma_addr_t dma_addr; > +}; > + > > /** > * struct chain_element - memory descriptor structure to store > @@ -756,6 +775,7 @@ struct scmd_priv { > * @num_op_reply_q: Number of operational reply queues > * @op_reply_qinfo: Operational reply queue info pointer > * @init_cmds: Command tracker for initialization commands > + * @cfg_cmds: Command tracker for configuration requests > * @facts: Cached IOC facts data > * @op_reply_desc_sz: Operational reply descriptor size > * @num_reply_bufs: Number of reply buffers allocated > @@ -854,6 +874,9 @@ struct scmd_priv { > * @io_throttle_low: I/O size to stop throttle in 512b blocks > * @num_io_throttle_group: Maximum number of throttle groups > * @throttle_groups: Pointer to throttle group info structures > + * @cfg_page: Default memory for configuration pages > + * @cfg_page_dma: Configuration page DMA address > + * @cfg_page_sz: Default configuration page memory size > */ > struct mpi3mr_ioc { > struct list_head list; > @@ -904,6 +927,7 @@ struct mpi3mr_ioc { > struct op_reply_qinfo *op_reply_qinfo; > > struct mpi3mr_drv_cmd init_cmds; > + struct mpi3mr_drv_cmd cfg_cmds; > struct mpi3mr_ioc_facts facts; > u16 op_reply_desc_sz; > > @@ -1025,6 +1049,10 @@ struct mpi3mr_ioc { > u32 io_throttle_low; > u16 num_io_throttle_group; > struct mpi3mr_throttle_group_info *throttle_groups; > + > + void *cfg_page; > + dma_addr_t cfg_page_dma; > + u16 cfg_page_sz; > }; > > /** > diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c > index 0866dfd..99d8df6 100644 > --- a/drivers/scsi/mpi3mr/mpi3mr_fw.c > +++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c > @@ -299,6 +299,8 @@ mpi3mr_get_drv_cmd(struct mpi3mr_ioc *mrioc, u16 host_tag, > switch (host_tag) { > case MPI3MR_HOSTTAG_INITCMDS: > return &mrioc->init_cmds; > + case MPI3MR_HOSTTAG_CFG_CMDS: > + return &mrioc->cfg_cmds; > case MPI3MR_HOSTTAG_BSG_CMDS: > return &mrioc->bsg_cmds; > case MPI3MR_HOSTTAG_BLK_TMS: > @@ -907,6 +909,7 @@ static const struct { > { MPI3MR_RESET_FROM_SYSFS, "sysfs invocation" }, > { MPI3MR_RESET_FROM_SYSFS_TIMEOUT, "sysfs TM timeout" }, > { MPI3MR_RESET_FROM_FIRMWARE, "firmware asynchronous reset" }, > + { MPI3MR_RESET_FROM_CFG_REQ_TIMEOUT, "configuration request timeout"}, > }; > > /** > @@ -3738,6 +3741,14 @@ retry_init: > > mpi3mr_print_ioc_info(mrioc); > > + dprint_init(mrioc, "allocating config page buffers\n"); > + mrioc->cfg_page = dma_alloc_coherent(&mrioc->pdev->dev, > + MPI3MR_DEFAULT_CFG_PAGE_SZ, &mrioc->cfg_page_dma, GFP_KERNEL); > + if (!mrioc->cfg_page) > + goto out_failed_noretry; > + > + mrioc->cfg_page_sz = MPI3MR_DEFAULT_CFG_PAGE_SZ; > + > retval = mpi3mr_alloc_reply_sense_bufs(mrioc); > if (retval) { > ioc_err(mrioc, > @@ -4362,6 +4373,10 @@ static void mpi3mr_flush_drv_cmds(struct mpi3mr_ioc *mrioc) > > cmdptr = &mrioc->init_cmds; > mpi3mr_drv_cmd_comp_reset(mrioc, cmdptr); > + > + cmdptr = &mrioc->cfg_cmds; > + mpi3mr_drv_cmd_comp_reset(mrioc, cmdptr); > + > cmdptr = &mrioc->bsg_cmds; > mpi3mr_drv_cmd_comp_reset(mrioc, cmdptr); > cmdptr = &mrioc->host_tm_cmds; > @@ -4786,3 +4801,241 @@ out: > ((retval == 0) ? "successful" : "failed")); > return retval; > } > + > + > +/** > + * mpi3mr_free_config_dma_memory - free memory for config page > + * @mrioc: Adapter instance reference > + * @mem_desc: memory descriptor structure > + * > + * Check whether the size of the buffer specified by the memory > + * descriptor is greater than the default page size if so then > + * free the memory pointed by the descriptor. > + * > + * Return: Nothing. > + */ > +static void mpi3mr_free_config_dma_memory(struct mpi3mr_ioc *mrioc, > + struct dma_memory_desc *mem_desc) > +{ > + if ((mem_desc->size > mrioc->cfg_page_sz) && mem_desc->addr) { > + dma_free_coherent(&mrioc->pdev->dev, mem_desc->size, > + mem_desc->addr, mem_desc->dma_addr); > + mem_desc->addr = NULL; > + } > +} > + > +/** > + * mpi3mr_alloc_config_dma_memory - Alloc memory for config page > + * @mrioc: Adapter instance reference > + * @mem_desc: Memory descriptor to hold dma memory info > + * > + * This function allocates new dmaable memory or provides the > + * default config page dmaable memory based on the memory size > + * described by the descriptor. > + * > + * Return: 0 on success, non-zero on failure. > + */ > +static int mpi3mr_alloc_config_dma_memory(struct mpi3mr_ioc *mrioc, > + struct dma_memory_desc *mem_desc) > +{ > + if (mem_desc->size > mrioc->cfg_page_sz) { > + mem_desc->addr = dma_alloc_coherent(&mrioc->pdev->dev, > + mem_desc->size, &mem_desc->dma_addr, GFP_KERNEL); > + if (!mem_desc->addr) > + return -ENOMEM; > + } else { > + mem_desc->addr = mrioc->cfg_page; > + mem_desc->dma_addr = mrioc->cfg_page_dma; > + memset(mem_desc->addr, 0, mrioc->cfg_page_sz); > + } > + return 0; > +} > + > +/** > + * mpi3mr_post_cfg_req - Issue config requests and wait > + * @mrioc: Adapter instance reference > + * @cfg_req: Configuration request > + * @timeout: Timeout in seconds > + * @ioc_status: Pointer to return ioc status > + * > + * A generic function for posting MPI3 configuration request to > + * the firmware. This blocks for the completion of request for > + * timeout seconds and if the request times out this function > + * faults the controller with proper reason code. > + * > + * On successful completion of the request this function returns > + * appropriate ioc status from the firmware back to the caller. > + * > + * Return: 0 on success, non-zero on failure. > + */ > +static int mpi3mr_post_cfg_req(struct mpi3mr_ioc *mrioc, > + struct mpi3_config_request *cfg_req, int timeout, u16 *ioc_status) > +{ > + int retval = 0; > + > + mutex_lock(&mrioc->cfg_cmds.mutex); > + if (mrioc->cfg_cmds.state & MPI3MR_CMD_PENDING) { > + retval = -1; > + ioc_err(mrioc, "sending config request failed due to command in use\n"); > + mutex_unlock(&mrioc->cfg_cmds.mutex); > + goto out; > + } > + mrioc->cfg_cmds.state = MPI3MR_CMD_PENDING; > + mrioc->cfg_cmds.is_waiting = 1; > + mrioc->cfg_cmds.callback = NULL; > + mrioc->cfg_cmds.ioc_status = 0; > + mrioc->cfg_cmds.ioc_loginfo = 0; > + > + cfg_req->host_tag = cpu_to_le16(MPI3MR_HOSTTAG_CFG_CMDS); > + cfg_req->function = MPI3_FUNCTION_CONFIG; > + > + init_completion(&mrioc->cfg_cmds.done); > + dprint_cfg_info(mrioc, "posting config request\n"); > + if (mrioc->logging_level & MPI3_DEBUG_CFG_INFO) > + dprint_dump(cfg_req, sizeof(struct mpi3_config_request), > + "mpi3_cfg_req"); > + retval = mpi3mr_admin_request_post(mrioc, cfg_req, sizeof(*cfg_req), 1); > + if (retval) { > + ioc_err(mrioc, "posting config request failed\n"); > + goto out_unlock; > + } > + wait_for_completion_timeout(&mrioc->cfg_cmds.done, (timeout * HZ)); > + if (!(mrioc->cfg_cmds.state & MPI3MR_CMD_COMPLETE)) { > + mpi3mr_check_rh_fault_ioc(mrioc, > + MPI3MR_RESET_FROM_CFG_REQ_TIMEOUT); > + ioc_err(mrioc, "config request timed out\n"); > + retval = -1; > + goto out_unlock; > + } > + *ioc_status = mrioc->cfg_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK; > + if ((*ioc_status) != MPI3_IOCSTATUS_SUCCESS) > + dprint_cfg_err(mrioc, > + "cfg_page request returned with ioc_status(0x%04x), log_info(0x%08x)\n", > + *ioc_status, mrioc->cfg_cmds.ioc_loginfo); > + > +out_unlock: > + mrioc->cfg_cmds.state = MPI3MR_CMD_NOTUSED; > + mutex_unlock(&mrioc->cfg_cmds.mutex); > + > +out: > + return retval; > +} > + > +/** > + * mpi3mr_process_cfg_req - config page request processor > + * @mrioc: Adapter instance reference > + * @cfg_req: Configuration request > + * @cfg_hdr: Configuration page header > + * @timeout: Timeout in seconds > + * @ioc_status: Pointer to return ioc status > + * @cfg_buf: Memory pointer to copy config page or header > + * @cfg_buf_sz: Size of the memory to get config page or header > + * > + * This is handler for config page read, write and config page > + * header read operations. > + * > + * This function expects the cfg_req to be populated with page > + * type, page number, action for the header read and with page > + * address for all other operations. > + * > + * The cfg_hdr can be passed as null for reading required header > + * details for read/write pages the cfg_hdr should point valid > + * configuration page header. > + * > + * This allocates dmaable memory based on the size of the config > + * buffer and set the SGE of the cfg_req. > + * > + * For write actions, the config page data has to be passed in > + * the cfg_buf and size of the data has to be mentioned in the > + * cfg_buf_sz. > + * > + * For read/header actions, on successful completion of the > + * request with successful ioc_status the data will be copied > + * into the cfg_buf limited to a minimum of actual page size and > + * cfg_buf_sz > + * > + * > + * Return: 0 on success, non-zero on failure. > + */ > +static int mpi3mr_process_cfg_req(struct mpi3mr_ioc *mrioc, > + struct mpi3_config_request *cfg_req, > + struct mpi3_config_page_header *cfg_hdr, int timeout, u16 *ioc_status, > + void *cfg_buf, u32 cfg_buf_sz) > +{ > + struct dma_memory_desc mem_desc; > + int retval = -1; > + u8 invalid_action = 0; > + u8 sgl_flags = MPI3MR_SGEFLAGS_SYSTEM_SIMPLE_END_OF_LIST; > + > + memset(&mem_desc, 0, sizeof(struct dma_memory_desc)); > + > + if (cfg_req->action == MPI3_CONFIG_ACTION_PAGE_HEADER) > + mem_desc.size = sizeof(struct mpi3_config_page_header); > + else { > + if (!cfg_hdr) { > + ioc_err(mrioc, "null config header passed for config action(%d), page_type(0x%02x), page_num(%d)\n", > + cfg_req->action, cfg_req->page_type, > + cfg_req->page_number); > + goto out; > + } > + switch (cfg_hdr->page_attribute & MPI3_CONFIG_PAGEATTR_MASK) { > + case MPI3_CONFIG_PAGEATTR_READ_ONLY: > + if (cfg_req->action > + != MPI3_CONFIG_ACTION_READ_CURRENT) > + invalid_action = 1; > + break; > + case MPI3_CONFIG_PAGEATTR_CHANGEABLE: > + if ((cfg_req->action == > + MPI3_CONFIG_ACTION_READ_PERSISTENT) || > + (cfg_req->action == > + MPI3_CONFIG_ACTION_WRITE_PERSISTENT)) > + invalid_action = 1; > + break; > + case MPI3_CONFIG_PAGEATTR_PERSISTENT: > + default: > + break; > + } > + if (invalid_action) { > + ioc_err(mrioc, > + "config action(%d) is not allowed for page_type(0x%02x), page_num(%d) with page_attribute(0x%02x)\n", > + cfg_req->action, cfg_req->page_type, > + cfg_req->page_number, cfg_hdr->page_attribute); > + goto out; > + } > + mem_desc.size = le16_to_cpu(cfg_hdr->page_length) * 4; > + cfg_req->page_length = cfg_hdr->page_length; > + cfg_req->page_version = cfg_hdr->page_version; > + } > + if (mpi3mr_alloc_config_dma_memory(mrioc, &mem_desc)) > + goto out; > + > + mpi3mr_add_sg_single(&cfg_req->sgl, sgl_flags, mem_desc.size, > + mem_desc.dma_addr); > + > + if ((cfg_req->action == MPI3_CONFIG_ACTION_WRITE_PERSISTENT) || > + (cfg_req->action == MPI3_CONFIG_ACTION_WRITE_CURRENT)) { > + memcpy(mem_desc.addr, cfg_buf, min_t(u16, mem_desc.size, > + cfg_buf_sz)); > + dprint_cfg_info(mrioc, "config buffer to be written\n"); > + if (mrioc->logging_level & MPI3_DEBUG_CFG_INFO) > + dprint_dump(mem_desc.addr, mem_desc.size, "cfg_buf"); > + } > + > + if (mpi3mr_post_cfg_req(mrioc, cfg_req, timeout, ioc_status)) > + goto out; > + > + retval = 0; > + if ((*ioc_status == MPI3_IOCSTATUS_SUCCESS) && > + (cfg_req->action != MPI3_CONFIG_ACTION_WRITE_PERSISTENT) && > + (cfg_req->action != MPI3_CONFIG_ACTION_WRITE_CURRENT)) { > + memcpy(cfg_buf, mem_desc.addr, min_t(u16, mem_desc.size, > + cfg_buf_sz)); > + dprint_cfg_info(mrioc, "config buffer read\n"); > + if (mrioc->logging_level & MPI3_DEBUG_CFG_INFO) > + dprint_dump(mem_desc.addr, mem_desc.size, "cfg_buf"); > + } > + > +out: > + mpi3mr_free_config_dma_memory(mrioc, &mem_desc); > + return retval; > +} > diff --git a/drivers/scsi/mpi3mr/mpi3mr_os.c b/drivers/scsi/mpi3mr/mpi3mr_os.c > index 8bdf927..40bed22 100644 > --- a/drivers/scsi/mpi3mr/mpi3mr_os.c > +++ b/drivers/scsi/mpi3mr/mpi3mr_os.c > @@ -4574,6 +4574,7 @@ mpi3mr_probe(struct pci_dev *pdev, const struct pci_device_id *id) > mpi3mr_init_drv_cmd(&mrioc->init_cmds, MPI3MR_HOSTTAG_INITCMDS); > mpi3mr_init_drv_cmd(&mrioc->host_tm_cmds, MPI3MR_HOSTTAG_BLK_TMS); > mpi3mr_init_drv_cmd(&mrioc->bsg_cmds, MPI3MR_HOSTTAG_BSG_CMDS); > + mpi3mr_init_drv_cmd(&mrioc->cfg_cmds, MPI3MR_HOSTTAG_CFG_CMDS); > > for (i = 0; i < MPI3MR_NUM_DEVRMCMD; i++) > mpi3mr_init_drv_cmd(&mrioc->dev_rmhs_cmds[i], > -- > 2.27.0 > Looks Good. Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> — Himanshu Madhani Oracle Linux Engineering
diff --git a/drivers/scsi/mpi3mr/mpi3mr.h b/drivers/scsi/mpi3mr/mpi3mr.h index 0935b2e..e15ad0e 100644 --- a/drivers/scsi/mpi3mr/mpi3mr.h +++ b/drivers/scsi/mpi3mr/mpi3mr.h @@ -97,6 +97,7 @@ extern atomic64_t event_counter; #define MPI3MR_HOSTTAG_PEL_ABORT 3 #define MPI3MR_HOSTTAG_PEL_WAIT 4 #define MPI3MR_HOSTTAG_BLK_TMS 5 +#define MPI3MR_HOSTTAG_CFG_CMDS 6 #define MPI3MR_NUM_DEVRMCMD 16 #define MPI3MR_HOSTTAG_DEVRMCMD_MIN (MPI3MR_HOSTTAG_BLK_TMS + 1) @@ -126,6 +127,8 @@ extern atomic64_t event_counter; #define MPI3MR_WATCHDOG_INTERVAL 1000 /* in milli seconds */ +#define MPI3MR_DEFAULT_CFG_PAGE_SZ 1024 /* in bytes */ + #define MPI3MR_SCMD_TIMEOUT (60 * HZ) #define MPI3MR_EH_SCMD_TIMEOUT (60 * HZ) @@ -274,6 +277,7 @@ enum mpi3mr_reset_reason { MPI3MR_RESET_FROM_SYSFS = 23, MPI3MR_RESET_FROM_SYSFS_TIMEOUT = 24, MPI3MR_RESET_FROM_FIRMWARE = 27, + MPI3MR_RESET_FROM_CFG_REQ_TIMEOUT = 29, }; /* Queue type definitions */ @@ -679,6 +683,21 @@ struct mpi3mr_drv_cmd { struct mpi3mr_drv_cmd *drv_cmd); }; +/** + * struct dma_memory_desc - memory descriptor structure to store + * virtual address, dma address and size for any generic dma + * memory allocations in the driver. + * + * @size: buffer size + * @addr: virtual address + * @dma_addr: dma address + */ +struct dma_memory_desc { + u32 size; + void *addr; + dma_addr_t dma_addr; +}; + /** * struct chain_element - memory descriptor structure to store @@ -756,6 +775,7 @@ struct scmd_priv { * @num_op_reply_q: Number of operational reply queues * @op_reply_qinfo: Operational reply queue info pointer * @init_cmds: Command tracker for initialization commands + * @cfg_cmds: Command tracker for configuration requests * @facts: Cached IOC facts data * @op_reply_desc_sz: Operational reply descriptor size * @num_reply_bufs: Number of reply buffers allocated @@ -854,6 +874,9 @@ struct scmd_priv { * @io_throttle_low: I/O size to stop throttle in 512b blocks * @num_io_throttle_group: Maximum number of throttle groups * @throttle_groups: Pointer to throttle group info structures + * @cfg_page: Default memory for configuration pages + * @cfg_page_dma: Configuration page DMA address + * @cfg_page_sz: Default configuration page memory size */ struct mpi3mr_ioc { struct list_head list; @@ -904,6 +927,7 @@ struct mpi3mr_ioc { struct op_reply_qinfo *op_reply_qinfo; struct mpi3mr_drv_cmd init_cmds; + struct mpi3mr_drv_cmd cfg_cmds; struct mpi3mr_ioc_facts facts; u16 op_reply_desc_sz; @@ -1025,6 +1049,10 @@ struct mpi3mr_ioc { u32 io_throttle_low; u16 num_io_throttle_group; struct mpi3mr_throttle_group_info *throttle_groups; + + void *cfg_page; + dma_addr_t cfg_page_dma; + u16 cfg_page_sz; }; /** diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c index 0866dfd..99d8df6 100644 --- a/drivers/scsi/mpi3mr/mpi3mr_fw.c +++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c @@ -299,6 +299,8 @@ mpi3mr_get_drv_cmd(struct mpi3mr_ioc *mrioc, u16 host_tag, switch (host_tag) { case MPI3MR_HOSTTAG_INITCMDS: return &mrioc->init_cmds; + case MPI3MR_HOSTTAG_CFG_CMDS: + return &mrioc->cfg_cmds; case MPI3MR_HOSTTAG_BSG_CMDS: return &mrioc->bsg_cmds; case MPI3MR_HOSTTAG_BLK_TMS: @@ -907,6 +909,7 @@ static const struct { { MPI3MR_RESET_FROM_SYSFS, "sysfs invocation" }, { MPI3MR_RESET_FROM_SYSFS_TIMEOUT, "sysfs TM timeout" }, { MPI3MR_RESET_FROM_FIRMWARE, "firmware asynchronous reset" }, + { MPI3MR_RESET_FROM_CFG_REQ_TIMEOUT, "configuration request timeout"}, }; /** @@ -3738,6 +3741,14 @@ retry_init: mpi3mr_print_ioc_info(mrioc); + dprint_init(mrioc, "allocating config page buffers\n"); + mrioc->cfg_page = dma_alloc_coherent(&mrioc->pdev->dev, + MPI3MR_DEFAULT_CFG_PAGE_SZ, &mrioc->cfg_page_dma, GFP_KERNEL); + if (!mrioc->cfg_page) + goto out_failed_noretry; + + mrioc->cfg_page_sz = MPI3MR_DEFAULT_CFG_PAGE_SZ; + retval = mpi3mr_alloc_reply_sense_bufs(mrioc); if (retval) { ioc_err(mrioc, @@ -4362,6 +4373,10 @@ static void mpi3mr_flush_drv_cmds(struct mpi3mr_ioc *mrioc) cmdptr = &mrioc->init_cmds; mpi3mr_drv_cmd_comp_reset(mrioc, cmdptr); + + cmdptr = &mrioc->cfg_cmds; + mpi3mr_drv_cmd_comp_reset(mrioc, cmdptr); + cmdptr = &mrioc->bsg_cmds; mpi3mr_drv_cmd_comp_reset(mrioc, cmdptr); cmdptr = &mrioc->host_tm_cmds; @@ -4786,3 +4801,241 @@ out: ((retval == 0) ? "successful" : "failed")); return retval; } + + +/** + * mpi3mr_free_config_dma_memory - free memory for config page + * @mrioc: Adapter instance reference + * @mem_desc: memory descriptor structure + * + * Check whether the size of the buffer specified by the memory + * descriptor is greater than the default page size if so then + * free the memory pointed by the descriptor. + * + * Return: Nothing. + */ +static void mpi3mr_free_config_dma_memory(struct mpi3mr_ioc *mrioc, + struct dma_memory_desc *mem_desc) +{ + if ((mem_desc->size > mrioc->cfg_page_sz) && mem_desc->addr) { + dma_free_coherent(&mrioc->pdev->dev, mem_desc->size, + mem_desc->addr, mem_desc->dma_addr); + mem_desc->addr = NULL; + } +} + +/** + * mpi3mr_alloc_config_dma_memory - Alloc memory for config page + * @mrioc: Adapter instance reference + * @mem_desc: Memory descriptor to hold dma memory info + * + * This function allocates new dmaable memory or provides the + * default config page dmaable memory based on the memory size + * described by the descriptor. + * + * Return: 0 on success, non-zero on failure. + */ +static int mpi3mr_alloc_config_dma_memory(struct mpi3mr_ioc *mrioc, + struct dma_memory_desc *mem_desc) +{ + if (mem_desc->size > mrioc->cfg_page_sz) { + mem_desc->addr = dma_alloc_coherent(&mrioc->pdev->dev, + mem_desc->size, &mem_desc->dma_addr, GFP_KERNEL); + if (!mem_desc->addr) + return -ENOMEM; + } else { + mem_desc->addr = mrioc->cfg_page; + mem_desc->dma_addr = mrioc->cfg_page_dma; + memset(mem_desc->addr, 0, mrioc->cfg_page_sz); + } + return 0; +} + +/** + * mpi3mr_post_cfg_req - Issue config requests and wait + * @mrioc: Adapter instance reference + * @cfg_req: Configuration request + * @timeout: Timeout in seconds + * @ioc_status: Pointer to return ioc status + * + * A generic function for posting MPI3 configuration request to + * the firmware. This blocks for the completion of request for + * timeout seconds and if the request times out this function + * faults the controller with proper reason code. + * + * On successful completion of the request this function returns + * appropriate ioc status from the firmware back to the caller. + * + * Return: 0 on success, non-zero on failure. + */ +static int mpi3mr_post_cfg_req(struct mpi3mr_ioc *mrioc, + struct mpi3_config_request *cfg_req, int timeout, u16 *ioc_status) +{ + int retval = 0; + + mutex_lock(&mrioc->cfg_cmds.mutex); + if (mrioc->cfg_cmds.state & MPI3MR_CMD_PENDING) { + retval = -1; + ioc_err(mrioc, "sending config request failed due to command in use\n"); + mutex_unlock(&mrioc->cfg_cmds.mutex); + goto out; + } + mrioc->cfg_cmds.state = MPI3MR_CMD_PENDING; + mrioc->cfg_cmds.is_waiting = 1; + mrioc->cfg_cmds.callback = NULL; + mrioc->cfg_cmds.ioc_status = 0; + mrioc->cfg_cmds.ioc_loginfo = 0; + + cfg_req->host_tag = cpu_to_le16(MPI3MR_HOSTTAG_CFG_CMDS); + cfg_req->function = MPI3_FUNCTION_CONFIG; + + init_completion(&mrioc->cfg_cmds.done); + dprint_cfg_info(mrioc, "posting config request\n"); + if (mrioc->logging_level & MPI3_DEBUG_CFG_INFO) + dprint_dump(cfg_req, sizeof(struct mpi3_config_request), + "mpi3_cfg_req"); + retval = mpi3mr_admin_request_post(mrioc, cfg_req, sizeof(*cfg_req), 1); + if (retval) { + ioc_err(mrioc, "posting config request failed\n"); + goto out_unlock; + } + wait_for_completion_timeout(&mrioc->cfg_cmds.done, (timeout * HZ)); + if (!(mrioc->cfg_cmds.state & MPI3MR_CMD_COMPLETE)) { + mpi3mr_check_rh_fault_ioc(mrioc, + MPI3MR_RESET_FROM_CFG_REQ_TIMEOUT); + ioc_err(mrioc, "config request timed out\n"); + retval = -1; + goto out_unlock; + } + *ioc_status = mrioc->cfg_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK; + if ((*ioc_status) != MPI3_IOCSTATUS_SUCCESS) + dprint_cfg_err(mrioc, + "cfg_page request returned with ioc_status(0x%04x), log_info(0x%08x)\n", + *ioc_status, mrioc->cfg_cmds.ioc_loginfo); + +out_unlock: + mrioc->cfg_cmds.state = MPI3MR_CMD_NOTUSED; + mutex_unlock(&mrioc->cfg_cmds.mutex); + +out: + return retval; +} + +/** + * mpi3mr_process_cfg_req - config page request processor + * @mrioc: Adapter instance reference + * @cfg_req: Configuration request + * @cfg_hdr: Configuration page header + * @timeout: Timeout in seconds + * @ioc_status: Pointer to return ioc status + * @cfg_buf: Memory pointer to copy config page or header + * @cfg_buf_sz: Size of the memory to get config page or header + * + * This is handler for config page read, write and config page + * header read operations. + * + * This function expects the cfg_req to be populated with page + * type, page number, action for the header read and with page + * address for all other operations. + * + * The cfg_hdr can be passed as null for reading required header + * details for read/write pages the cfg_hdr should point valid + * configuration page header. + * + * This allocates dmaable memory based on the size of the config + * buffer and set the SGE of the cfg_req. + * + * For write actions, the config page data has to be passed in + * the cfg_buf and size of the data has to be mentioned in the + * cfg_buf_sz. + * + * For read/header actions, on successful completion of the + * request with successful ioc_status the data will be copied + * into the cfg_buf limited to a minimum of actual page size and + * cfg_buf_sz + * + * + * Return: 0 on success, non-zero on failure. + */ +static int mpi3mr_process_cfg_req(struct mpi3mr_ioc *mrioc, + struct mpi3_config_request *cfg_req, + struct mpi3_config_page_header *cfg_hdr, int timeout, u16 *ioc_status, + void *cfg_buf, u32 cfg_buf_sz) +{ + struct dma_memory_desc mem_desc; + int retval = -1; + u8 invalid_action = 0; + u8 sgl_flags = MPI3MR_SGEFLAGS_SYSTEM_SIMPLE_END_OF_LIST; + + memset(&mem_desc, 0, sizeof(struct dma_memory_desc)); + + if (cfg_req->action == MPI3_CONFIG_ACTION_PAGE_HEADER) + mem_desc.size = sizeof(struct mpi3_config_page_header); + else { + if (!cfg_hdr) { + ioc_err(mrioc, "null config header passed for config action(%d), page_type(0x%02x), page_num(%d)\n", + cfg_req->action, cfg_req->page_type, + cfg_req->page_number); + goto out; + } + switch (cfg_hdr->page_attribute & MPI3_CONFIG_PAGEATTR_MASK) { + case MPI3_CONFIG_PAGEATTR_READ_ONLY: + if (cfg_req->action + != MPI3_CONFIG_ACTION_READ_CURRENT) + invalid_action = 1; + break; + case MPI3_CONFIG_PAGEATTR_CHANGEABLE: + if ((cfg_req->action == + MPI3_CONFIG_ACTION_READ_PERSISTENT) || + (cfg_req->action == + MPI3_CONFIG_ACTION_WRITE_PERSISTENT)) + invalid_action = 1; + break; + case MPI3_CONFIG_PAGEATTR_PERSISTENT: + default: + break; + } + if (invalid_action) { + ioc_err(mrioc, + "config action(%d) is not allowed for page_type(0x%02x), page_num(%d) with page_attribute(0x%02x)\n", + cfg_req->action, cfg_req->page_type, + cfg_req->page_number, cfg_hdr->page_attribute); + goto out; + } + mem_desc.size = le16_to_cpu(cfg_hdr->page_length) * 4; + cfg_req->page_length = cfg_hdr->page_length; + cfg_req->page_version = cfg_hdr->page_version; + } + if (mpi3mr_alloc_config_dma_memory(mrioc, &mem_desc)) + goto out; + + mpi3mr_add_sg_single(&cfg_req->sgl, sgl_flags, mem_desc.size, + mem_desc.dma_addr); + + if ((cfg_req->action == MPI3_CONFIG_ACTION_WRITE_PERSISTENT) || + (cfg_req->action == MPI3_CONFIG_ACTION_WRITE_CURRENT)) { + memcpy(mem_desc.addr, cfg_buf, min_t(u16, mem_desc.size, + cfg_buf_sz)); + dprint_cfg_info(mrioc, "config buffer to be written\n"); + if (mrioc->logging_level & MPI3_DEBUG_CFG_INFO) + dprint_dump(mem_desc.addr, mem_desc.size, "cfg_buf"); + } + + if (mpi3mr_post_cfg_req(mrioc, cfg_req, timeout, ioc_status)) + goto out; + + retval = 0; + if ((*ioc_status == MPI3_IOCSTATUS_SUCCESS) && + (cfg_req->action != MPI3_CONFIG_ACTION_WRITE_PERSISTENT) && + (cfg_req->action != MPI3_CONFIG_ACTION_WRITE_CURRENT)) { + memcpy(cfg_buf, mem_desc.addr, min_t(u16, mem_desc.size, + cfg_buf_sz)); + dprint_cfg_info(mrioc, "config buffer read\n"); + if (mrioc->logging_level & MPI3_DEBUG_CFG_INFO) + dprint_dump(mem_desc.addr, mem_desc.size, "cfg_buf"); + } + +out: + mpi3mr_free_config_dma_memory(mrioc, &mem_desc); + return retval; +} diff --git a/drivers/scsi/mpi3mr/mpi3mr_os.c b/drivers/scsi/mpi3mr/mpi3mr_os.c index 8bdf927..40bed22 100644 --- a/drivers/scsi/mpi3mr/mpi3mr_os.c +++ b/drivers/scsi/mpi3mr/mpi3mr_os.c @@ -4574,6 +4574,7 @@ mpi3mr_probe(struct pci_dev *pdev, const struct pci_device_id *id) mpi3mr_init_drv_cmd(&mrioc->init_cmds, MPI3MR_HOSTTAG_INITCMDS); mpi3mr_init_drv_cmd(&mrioc->host_tm_cmds, MPI3MR_HOSTTAG_BLK_TMS); mpi3mr_init_drv_cmd(&mrioc->bsg_cmds, MPI3MR_HOSTTAG_BSG_CMDS); + mpi3mr_init_drv_cmd(&mrioc->cfg_cmds, MPI3MR_HOSTTAG_CFG_CMDS); for (i = 0; i < MPI3MR_NUM_DEVRMCMD; i++) mpi3mr_init_drv_cmd(&mrioc->dev_rmhs_cmds[i],
Added framework to issue config requests commands to controller firmware. Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> --- drivers/scsi/mpi3mr/mpi3mr.h | 28 ++++ drivers/scsi/mpi3mr/mpi3mr_fw.c | 253 ++++++++++++++++++++++++++++++++ drivers/scsi/mpi3mr/mpi3mr_os.c | 1 + 3 files changed, 282 insertions(+)