diff mbox series

[10/62] target/arm: Use GetPhysAddrResult in get_phys_addr_lpae

Message ID 20220703082419.770989-11-richard.henderson@linaro.org
State Superseded
Headers show
Series target/arm: Implement FEAT_HAFDBS | expand

Commit Message

Richard Henderson July 3, 2022, 8:23 a.m. UTC
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
 target/arm/ptw.c | 69 ++++++++++++++++++------------------------------
 1 file changed, 26 insertions(+), 43 deletions(-)

Comments

Alex Bennée Aug. 10, 2022, 1:04 p.m. UTC | #1
Richard Henderson <richard.henderson@linaro.org> writes:

> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
diff mbox series

Patch

diff --git a/target/arm/ptw.c b/target/arm/ptw.c
index b78658161f..5e79c9be98 100644
--- a/target/arm/ptw.c
+++ b/target/arm/ptw.c
@@ -16,10 +16,8 @@ 
 
 static bool get_phys_addr_lpae(CPUARMState *env, uint64_t address,
                                MMUAccessType access_type, ARMMMUIdx mmu_idx,
-                               bool s1_is_el0, hwaddr *phys_ptr,
-                               MemTxAttrs *txattrs, int *prot,
-                               target_ulong *page_size_ptr,
-                               ARMMMUFaultInfo *fi, ARMCacheAttrs *cacheattrs)
+                               bool s1_is_el0, GetPhysAddrResult *result,
+                               ARMMMUFaultInfo *fi)
     __attribute__((nonnull));
 
 /* This mapping is common between ID_AA64MMFR0.PARANGE and TCR_ELx.{I}PS. */
@@ -204,18 +202,13 @@  static hwaddr S1_ptw_translate(CPUARMState *env, ARMMMUIdx mmu_idx,
 {
     if (arm_mmu_idx_is_stage1_of_2(mmu_idx) &&
         !regime_translation_disabled(env, ARMMMUIdx_Stage2)) {
-        target_ulong s2size;
-        hwaddr s2pa;
-        int s2prot;
-        int ret;
         ARMMMUIdx s2_mmu_idx = *is_secure ? ARMMMUIdx_Stage2_S
                                           : ARMMMUIdx_Stage2;
-        ARMCacheAttrs cacheattrs = {};
-        MemTxAttrs txattrs = {};
+        GetPhysAddrResult s2 = {};
+        int ret;
 
         ret = get_phys_addr_lpae(env, addr, MMU_DATA_LOAD, s2_mmu_idx, false,
-                                 &s2pa, &txattrs, &s2prot, &s2size, fi,
-                                 &cacheattrs);
+                                 &s2, fi);
         if (ret) {
             assert(fi->type != ARMFault_None);
             fi->s2addr = addr;
@@ -225,7 +218,7 @@  static hwaddr S1_ptw_translate(CPUARMState *env, ARMMMUIdx mmu_idx,
             return ~0;
         }
         if ((arm_hcr_el2_eff(env) & HCR_PTW) &&
-            ptw_attrs_are_device(env, cacheattrs)) {
+            ptw_attrs_are_device(env, s2.cacheattrs)) {
             /*
              * PTW set and S1 walk touched S2 Device memory:
              * generate Permission fault.
@@ -249,7 +242,7 @@  static hwaddr S1_ptw_translate(CPUARMState *env, ARMMMUIdx mmu_idx,
             assert(!*is_secure);
         }
 
-        addr = s2pa;
+        addr = s2.phys;
     }
     return addr;
 }
@@ -968,19 +961,13 @@  static bool check_s2_mmu_setup(ARMCPU *cpu, bool is_aa64, int level,
  *             table walk), must be true if this is stage 2 of a stage 1+2
  *             walk for an EL0 access. If @mmu_idx is anything else,
  *             @s1_is_el0 is ignored.
- * @phys_ptr: set to the physical address corresponding to the virtual address
- * @attrs: set to the memory transaction attributes to use
- * @prot: set to the permissions for the page containing phys_ptr
- * @page_size_ptr: set to the size of the page containing phys_ptr
+ * @result: set on translation success,
  * @fi: set to fault info if the translation fails
- * @cacheattrs: (if non-NULL) set to the cacheability/shareability attributes
  */
 static bool get_phys_addr_lpae(CPUARMState *env, uint64_t address,
                                MMUAccessType access_type, ARMMMUIdx mmu_idx,
-                               bool s1_is_el0, hwaddr *phys_ptr,
-                               MemTxAttrs *txattrs, int *prot,
-                               target_ulong *page_size_ptr,
-                               ARMMMUFaultInfo *fi, ARMCacheAttrs *cacheattrs)
+                               bool s1_is_el0, GetPhysAddrResult *result,
+                               ARMMMUFaultInfo *fi)
 {
     ARMCPU *cpu = env_archcpu(env);
     /* Read an LPAE long-descriptor translation table. */
@@ -1298,16 +1285,16 @@  static bool get_phys_addr_lpae(CPUARMState *env, uint64_t address,
     if (mmu_idx == ARMMMUIdx_Stage2 || mmu_idx == ARMMMUIdx_Stage2_S) {
         ns = mmu_idx == ARMMMUIdx_Stage2;
         xn = extract32(attrs, 11, 2);
-        *prot = get_S2prot(env, ap, xn, s1_is_el0);
+        result->prot = get_S2prot(env, ap, xn, s1_is_el0);
     } else {
         ns = extract32(attrs, 3, 1);
         xn = extract32(attrs, 12, 1);
         pxn = extract32(attrs, 11, 1);
-        *prot = get_S1prot(env, mmu_idx, aarch64, ap, ns, xn, pxn);
+        result->prot = get_S1prot(env, mmu_idx, aarch64, ap, ns, xn, pxn);
     }
 
     fault_type = ARMFault_Permission;
-    if (!(*prot & (1 << access_type))) {
+    if (!(result->prot & (1 << access_type))) {
         goto do_fault;
     }
 
@@ -1317,23 +1304,23 @@  static bool get_phys_addr_lpae(CPUARMState *env, uint64_t address,
          * the CPU doesn't support TZ or this is a non-secure translation
          * regime, because the attribute will already be non-secure.
          */
-        txattrs->secure = false;
+        result->attrs.secure = false;
     }
     /* When in aarch64 mode, and BTI is enabled, remember GP in the IOTLB.  */
     if (aarch64 && cpu_isar_feature(aa64_bti, cpu)) {
-        cacheattrs->guarded = guarded;
+        result->cacheattrs.guarded = guarded;
     }
 
     if (mmu_idx == ARMMMUIdx_Stage2 || mmu_idx == ARMMMUIdx_Stage2_S) {
-        cacheattrs->is_s2_format = true;
-        cacheattrs->attrs = extract32(attrs, 0, 4);
+        result->cacheattrs.is_s2_format = true;
+        result->cacheattrs.attrs = extract32(attrs, 0, 4);
     } else {
         /* Index into MAIR registers for cache attributes */
         uint8_t attrindx = extract32(attrs, 0, 3);
         uint64_t mair = env->cp15.mair_el[regime_el(env, mmu_idx)];
         assert(attrindx <= 7);
-        cacheattrs->is_s2_format = false;
-        cacheattrs->attrs = extract64(mair, attrindx * 8, 8);
+        result->cacheattrs.is_s2_format = false;
+        result->cacheattrs.attrs = extract64(mair, attrindx * 8, 8);
     }
 
     /*
@@ -1342,13 +1329,13 @@  static bool get_phys_addr_lpae(CPUARMState *env, uint64_t address,
      * that case comes from TCR_ELx, which we extracted earlier.
      */
     if (param.ds) {
-        cacheattrs->shareability = param.sh;
+        result->cacheattrs.shareability = param.sh;
     } else {
-        cacheattrs->shareability = extract32(attrs, 6, 2);
+        result->cacheattrs.shareability = extract32(attrs, 6, 2);
     }
 
-    *phys_ptr = descaddr;
-    *page_size_ptr = page_size;
+    result->phys = descaddr;
+    result->page_size = page_size;
     return false;
 
 do_fault:
@@ -2350,10 +2337,8 @@  bool get_phys_addr(CPUARMState *env, target_ulong address,
             cacheattrs1 = result->cacheattrs;
             memset(result, 0, sizeof(*result));
 
-            ret = get_phys_addr_lpae(env, ipa, access_type, s2_mmu_idx, is_el0,
-                                     &result->phys, &result->attrs,
-                                     &result->prot, &result->page_size,
-                                     fi, &result->cacheattrs);
+            ret = get_phys_addr_lpae(env, ipa, access_type, s2_mmu_idx,
+                                     is_el0, result, fi);
             fi->s2addr = ipa;
 
             /* Combine the S1 and S2 perms.  */
@@ -2524,9 +2509,7 @@  bool get_phys_addr(CPUARMState *env, target_ulong address,
 
     if (regime_using_lpae_format(env, mmu_idx)) {
         return get_phys_addr_lpae(env, address, access_type, mmu_idx, false,
-                                  &result->phys, &result->attrs,
-                                  &result->prot, &result->page_size,
-                                  fi, &result->cacheattrs);
+                                  result, fi);
     } else if (regime_sctlr(env, mmu_idx) & SCTLR_XP) {
         return get_phys_addr_v6(env, address, access_type, mmu_idx,
                                 &result->phys, &result->attrs,