diff mbox series

[5/8] remoteproc: qcom: Add efuse evb selection control

Message ID 1659536480-5176-6-git-send-email-quic_srivasam@quicinc.com
State Superseded
Headers show
Series [1/8] dt-bindings: remoteproc: qcom: adsp: Make ADSP pil loader as generic | expand

Commit Message

Srinivasa Rao Mandadapu Aug. 3, 2022, 2:21 p.m. UTC
Add efuse evb selection control and enable it for starting ADSP.

Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
---
 drivers/remoteproc/qcom_q6v5_adsp.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

Comments

Dmitry Baryshkov Aug. 6, 2022, 8:26 p.m. UTC | #1
On 03/08/2022 17:21, Srinivasa Rao Mandadapu wrote:
> Add efuse evb selection control and enable it for starting ADSP.
> 
> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>

Is the lpass_efuse region used solely by the ADSP or is it shared with 
anybody else (e.g. other sound-related devices)? If the latter is true, 
then please use syscon for the lpass_efuse region.

> ---
>   drivers/remoteproc/qcom_q6v5_adsp.c | 10 ++++++++++
>   1 file changed, 10 insertions(+)
> 
> diff --git a/drivers/remoteproc/qcom_q6v5_adsp.c b/drivers/remoteproc/qcom_q6v5_adsp.c
> index a9fcb5c..201cc21 100644
> --- a/drivers/remoteproc/qcom_q6v5_adsp.c
> +++ b/drivers/remoteproc/qcom_q6v5_adsp.c
> @@ -56,6 +56,7 @@
>   
>   #define LPASS_BOOT_CORE_START	BIT(0)
>   #define LPASS_BOOT_CMD_START	BIT(0)
> +#define LPASS_EFUSE_Q6SS_EVB_SEL 0x0
>   
>   struct adsp_pil_data {
>   	int crash_reason_smem;
> @@ -85,6 +86,7 @@ struct qcom_adsp {
>   	struct clk_bulk_data *clks;
>   
>   	void __iomem *qdsp6ss_base;
> +	void __iomem *lpass_efuse;
>   
>   	struct reset_control *pdc_sync_reset;
>   	struct reset_control *restart;
> @@ -366,6 +368,9 @@ static int adsp_start(struct rproc *rproc)
>   	/* Program boot address */
>   	writel(adsp->mem_phys >> 4, adsp->qdsp6ss_base + RST_EVB_REG);
>   
> +	if (adsp->lpass_efuse)
> +		writel(LPASS_EFUSE_Q6SS_EVB_SEL, adsp->lpass_efuse);
> +
>   	/* De-assert QDSP6 stop core. QDSP6 will execute after out of reset */
>   	writel(LPASS_BOOT_CORE_START, adsp->qdsp6ss_base + CORE_START_REG);
>   
> @@ -520,6 +525,11 @@ static int adsp_init_mmio(struct qcom_adsp *adsp,
>   		return PTR_ERR(adsp->qdsp6ss_base);
>   	}
>   
> +	adsp->lpass_efuse =  devm_platform_ioremap_resource_byname(pdev, "lpass_efuse");
> +	if (IS_ERR(adsp->lpass_efuse)) {
> +		adsp->lpass_efuse = NULL;
> +		dev_dbg(adsp->dev, "failed to map LPASS efuse registers\n");
> +	}
>   	syscon = of_parse_phandle(pdev->dev.of_node, "qcom,halt-regs", 0);
>   	if (!syscon) {
>   		dev_err(&pdev->dev, "failed to parse qcom,halt-regs\n");
diff mbox series

Patch

diff --git a/drivers/remoteproc/qcom_q6v5_adsp.c b/drivers/remoteproc/qcom_q6v5_adsp.c
index a9fcb5c..201cc21 100644
--- a/drivers/remoteproc/qcom_q6v5_adsp.c
+++ b/drivers/remoteproc/qcom_q6v5_adsp.c
@@ -56,6 +56,7 @@ 
 
 #define LPASS_BOOT_CORE_START	BIT(0)
 #define LPASS_BOOT_CMD_START	BIT(0)
+#define LPASS_EFUSE_Q6SS_EVB_SEL 0x0
 
 struct adsp_pil_data {
 	int crash_reason_smem;
@@ -85,6 +86,7 @@  struct qcom_adsp {
 	struct clk_bulk_data *clks;
 
 	void __iomem *qdsp6ss_base;
+	void __iomem *lpass_efuse;
 
 	struct reset_control *pdc_sync_reset;
 	struct reset_control *restart;
@@ -366,6 +368,9 @@  static int adsp_start(struct rproc *rproc)
 	/* Program boot address */
 	writel(adsp->mem_phys >> 4, adsp->qdsp6ss_base + RST_EVB_REG);
 
+	if (adsp->lpass_efuse)
+		writel(LPASS_EFUSE_Q6SS_EVB_SEL, adsp->lpass_efuse);
+
 	/* De-assert QDSP6 stop core. QDSP6 will execute after out of reset */
 	writel(LPASS_BOOT_CORE_START, adsp->qdsp6ss_base + CORE_START_REG);
 
@@ -520,6 +525,11 @@  static int adsp_init_mmio(struct qcom_adsp *adsp,
 		return PTR_ERR(adsp->qdsp6ss_base);
 	}
 
+	adsp->lpass_efuse =  devm_platform_ioremap_resource_byname(pdev, "lpass_efuse");
+	if (IS_ERR(adsp->lpass_efuse)) {
+		adsp->lpass_efuse = NULL;
+		dev_dbg(adsp->dev, "failed to map LPASS efuse registers\n");
+	}
 	syscon = of_parse_phandle(pdev->dev.of_node, "qcom,halt-regs", 0);
 	if (!syscon) {
 		dev_err(&pdev->dev, "failed to parse qcom,halt-regs\n");