| Message ID | 20220727045035.32225-7-rex-bc.chen@mediatek.com |
|---|---|
| State | New |
| Headers | show |
| Series | drm/mediatek: Add MT8195 DisplayPort driver | expand |
Hi, Bo-Chen: On Wed, 2022-07-27 at 12:50 +0800, Bo-Chen Chen wrote: > From: Guillaume Ranquet <granquet@baylibre.com> > > This patch adds External DisplayPort support to the mt8195 eDP > driver. > > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> > Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> > --- > drivers/gpu/drm/mediatek/mtk_dp.c | 181 +++++++++++++++++++++--- > -- > drivers/gpu/drm/mediatek/mtk_dp_reg.h | 1 + > 2 files changed, 146 insertions(+), 36 deletions(-) > > diff --git a/drivers/gpu/drm/mediatek/mtk_dp.c > b/drivers/gpu/drm/mediatek/mtk_dp.c > index 06eeecedd49e..ce817cb59445 100644 > --- a/drivers/gpu/drm/mediatek/mtk_dp.c > +++ b/drivers/gpu/drm/mediatek/mtk_dp.c > @@ -103,6 +103,11 @@ static struct regmap_config mtk_dp_regmap_config > = { > .name = "mtk-dp-registers", > }; > > +static bool mtk_dp_is_edp(struct mtk_dp *mtk_dp) > +{ > + return mtk_dp->next_bridge; For external DP, it could also connect to a bridge IC which transfer DP to HDMI or some interface else. Use the compatible to judge this edp or dp. > +} > + > static struct mtk_dp *mtk_dp_from_bridge(struct drm_bridge *b) > { > return container_of(b, struct mtk_dp, bridge); > @@ -341,6 +346,19 @@ static void mtk_dp_pg_enable(struct mtk_dp > *mtk_dp, bool enable) > 4 << PGEN_PATTERN_SEL_SHIFT, > PGEN_PATTERN_SEL_MASK); > } > > +static bool mtk_dp_plug_state(struct mtk_dp *mtk_dp) > +{ > + return mtk_dp->train_info.cable_plugged_in; > +} > + > +static bool mtk_dp_plug_state_avoid_pulse(struct mtk_dp *mtk_dp) > +{ > + bool ret; > + > + return !(readx_poll_timeout(mtk_dp_plug_state, mtk_dp, ret, > ret, > + 4000, 7 * 4000)); > +} > + > static void mtk_dp_aux_irq_clear(struct mtk_dp *mtk_dp) > { > mtk_dp_write(mtk_dp, MTK_DP_AUX_P0_3640, > @@ -778,35 +796,67 @@ static void mtk_dp_get_calibration_data(struct > mtk_dp *mtk_dp) > return; > } > > - cal_data->glb_bias_trim = > - check_cal_data_valid(mtk_dp, 1, 0x1e, > - (buf[3] >> 27) & 0x1f, 0xf); > - cal_data->clktx_impse = > - check_cal_data_valid(mtk_dp, 1, 0xe, > - (buf[0] >> 9) & 0xf, 0x8); > - cal_data->ln_tx_impsel_pmos[0] = > - check_cal_data_valid(mtk_dp, 1, 0xe, > - (buf[2] >> 28) & 0xf, 0x8); > - cal_data->ln_tx_impsel_nmos[0] = > - check_cal_data_valid(mtk_dp, 1, 0xe, > - (buf[2] >> 24) & 0xf, 0x8); > - cal_data->ln_tx_impsel_pmos[1] = > - check_cal_data_valid(mtk_dp, 1, 0xe, > - (buf[2] >> 20) & 0xf, 0x8); > - cal_data->ln_tx_impsel_nmos[1] = > - check_cal_data_valid(mtk_dp, 1, 0xe, > - (buf[2] >> 16) & 0xf, 0x8); > - cal_data->ln_tx_impsel_pmos[2] = > - check_cal_data_valid(mtk_dp, 1, 0xe, > - (buf[2] >> 12) & 0xf, 0x8); > - cal_data->ln_tx_impsel_nmos[2] = > - check_cal_data_valid(mtk_dp, 1, 0xe, > - (buf[2] >> 8) & 0xf, 0x8); > - cal_data->ln_tx_impsel_pmos[3] = > - check_cal_data_valid(mtk_dp, 1, 0xe, > - (buf[2] >> 4) & 0xf, 0x8); > - cal_data->ln_tx_impsel_nmos[3] = > - check_cal_data_valid(mtk_dp, 1, 0xe, buf[2] & 0xf, > 0x8); > + if (mtk_dp_is_edp(mtk_dp)) { > + cal_data->glb_bias_trim = > + check_cal_data_valid(mtk_dp, 1, 0x1e, > + (buf[3] >> 27) & 0x1f, > 0xf); > + cal_data->clktx_impse = > + check_cal_data_valid(mtk_dp, 1, 0xe, > + (buf[0] >> 9) & 0xf, 0x8); > + cal_data->ln_tx_impsel_pmos[0] = > + check_cal_data_valid(mtk_dp, 1, 0xe, > + (buf[2] >> 28) & 0xf, > 0x8); > + cal_data->ln_tx_impsel_nmos[0] = > + check_cal_data_valid(mtk_dp, 1, 0xe, > + (buf[2] >> 24) & 0xf, > 0x8); > + cal_data->ln_tx_impsel_pmos[1] = > + check_cal_data_valid(mtk_dp, 1, 0xe, > + (buf[2] >> 20) & 0xf, > 0x8); > + cal_data->ln_tx_impsel_nmos[1] = > + check_cal_data_valid(mtk_dp, 1, 0xe, > + (buf[2] >> 16) & 0xf, > 0x8); > + cal_data->ln_tx_impsel_pmos[2] = > + check_cal_data_valid(mtk_dp, 1, 0xe, > + (buf[2] >> 12) & 0xf, > 0x8); > + cal_data->ln_tx_impsel_nmos[2] = > + check_cal_data_valid(mtk_dp, 1, 0xe, > + (buf[2] >> 8) & 0xf, 0x8); > + cal_data->ln_tx_impsel_pmos[3] = > + check_cal_data_valid(mtk_dp, 1, 0xe, > + (buf[2] >> 4) & 0xf, 0x8); > + cal_data->ln_tx_impsel_nmos[3] = > + check_cal_data_valid(mtk_dp, 1, 0xe, buf[2] & > 0xf, 0x8); > + } else { > + cal_data->glb_bias_trim = > + check_cal_data_valid(mtk_dp, 1, 0x1e, > + (buf[0] >> 27) & 0x1f, > 0xf); Why not place glb_bias_trim value in nvmem buf[3] for both edp and dp case? Place in the same nvmem position, the driver code would be simple. > + cal_data->clktx_impse = > + check_cal_data_valid(mtk_dp, 1, 0xe, > + (buf[0] >> 13) & 0xf, > 0x8); > + cal_data->ln_tx_impsel_pmos[0] = > + check_cal_data_valid(mtk_dp, 1, 0xe, > + (buf[1] >> 28) & 0xf, > 0x8); > + cal_data->ln_tx_impsel_nmos[0] = > + check_cal_data_valid(mtk_dp, 1, 0xe, > + (buf[1] >> 24) & 0xf, > 0x8); > + cal_data->ln_tx_impsel_pmos[1] = > + check_cal_data_valid(mtk_dp, 1, 0xe, > + (buf[1] >> 20) & 0xf, > 0x8); > + cal_data->ln_tx_impsel_nmos[1] = > + check_cal_data_valid(mtk_dp, 1, 0xe, > + (buf[1] >> 16) & 0xf, > 0x8); > + cal_data->ln_tx_impsel_pmos[2] = > + check_cal_data_valid(mtk_dp, 1, 0xe, > + (buf[1] >> 12) & 0xf, > 0x8); > + cal_data->ln_tx_impsel_nmos[2] = > + check_cal_data_valid(mtk_dp, 1, 0xe, > + (buf[1] >> 8) & 0xf, 0x8); > + cal_data->ln_tx_impsel_pmos[3] = > + check_cal_data_valid(mtk_dp, 1, 0xe, > + (buf[1] >> 4) & 0xf, 0x8); > + cal_data->ln_tx_impsel_nmos[3] = > + check_cal_data_valid(mtk_dp, 1, 0xe, buf[1] & > 0xf, 0x8); Why not place ln_tx_impsel_nmos and ln_tx_impsel_pmos value in nvmem buf[2] for both edp and dp case? Place in the same nvmem position, the driver code would be simple. > + } > > kfree(buf); > } > @@ -926,7 +976,10 @@ static void mtk_dp_video_mute(struct mtk_dp > *mtk_dp, bool enable) > VIDEO_MUTE_SEL_DP_ENC0_P0_MASK | > VIDEO_MUTE_SW_DP_ENC0_P0_MASK); > > - mtk_dp_sip_atf_call(mtk_dp, MTK_DP_SIP_ATF_EDP_VIDEO_UNMUTE, > enable); > + mtk_dp_sip_atf_call(mtk_dp, > + mtk_dp_is_edp(mtk_dp) ? > + MTK_DP_SIP_ATF_EDP_VIDEO_UNMUTE : > + MTK_DP_SIP_ATF_VIDEO_UNMUTE, enable); Use of_device_get_match_data to select MTK_DP_SIP_ATF_EDP_VIDEO_UNMUTE or MTK_DP_SIP_ATF_VIDEO_UNMUTE. > } > > static void mtk_dp_power_enable(struct mtk_dp *mtk_dp) > @@ -1226,6 +1279,9 @@ static int mtk_dp_parse_capabilities(struct > mtk_dp *mtk_dp) > drm_dp_dpcd_writeb(&mtk_dp->aux, DP_SET_POWER, > DP_SET_POWER_D0); > usleep_range(2000, 5000); > > + if (!mtk_dp_plug_state(mtk_dp)) > + return -ENODEV; > + > drm_dp_read_dpcd_caps(&mtk_dp->aux, mtk_dp->rx_cap); > > train_info->link_rate = min_t(int, mtk_dp->max_linkrate, > @@ -1277,6 +1333,9 @@ static int mtk_dp_train_start(struct mtk_dp > *mtk_dp) > u8 train_limit; > u8 max_link_rate; > > + if (!mtk_dp_plug_state_avoid_pulse(mtk_dp)) > + return -ENODEV; > + > link_rate = mtk_dp->rx_cap[1]; > lane_count = mtk_dp->rx_cap[2] & 0x1F; > > @@ -1412,6 +1471,9 @@ static irqreturn_t mtk_dp_hpd_event_thread(int > hpd, void *dev) > { > struct mtk_dp *mtk_dp = dev; > > + dev_dbg(mtk_dp->dev, "drm_helper_hpd_irq_event\n"); > + drm_helper_hpd_irq_event(mtk_dp->bridge.dev); Because edp also have hpd interrupt, so I would like both edp and dp have the same control flow for hdp. So move this to edp patch. > + > if (mtk_dp->train_info.hpd_inerrupt) { > dev_dbg(mtk_dp->dev, "MTK_DP_HPD_INTERRUPT\n"); > mtk_dp->train_info.hpd_inerrupt = false; > @@ -1452,9 +1514,20 @@ static irqreturn_t mtk_dp_hpd_event(int hpd, > void *dev) > else > train_info->cable_plugged_in = false; > > - mtk_dp_update_bits(mtk_dp, MTK_DP_TOP_PWR_STATE, > - DP_PWR_STATE_BANDGAP_TPLL_LANE, > - DP_PWR_STATE_MASK); > + if (!train_info->cable_plugged_in) { > + mtk_dp_video_mute(mtk_dp, true); > + > + mtk_dp_initialize_priv_data(mtk_dp); > + mtk_dp_set_idle_pattern(mtk_dp, true); > + > + mtk_dp_update_bits(mtk_dp, > MTK_DP_TOP_PWR_STATE, > + DP_PWR_STATE_BANDGAP_TPLL, > + DP_PWR_STATE_MASK); > + } else { > + mtk_dp_update_bits(mtk_dp, > MTK_DP_TOP_PWR_STATE, > + DP_PWR_STATE_BANDGAP_TPLL_LA > NE, > + DP_PWR_STATE_MASK); > + } > } > > return IRQ_HANDLED; > @@ -1499,6 +1572,24 @@ static int mtk_dp_dt_parse(struct mtk_dp > *mtk_dp, > return 0; > } > > +static enum drm_connector_status mtk_dp_bdg_detect(struct drm_bridge > *bridge) > +{ > + struct mtk_dp *mtk_dp = mtk_dp_from_bridge(bridge); > + enum drm_connector_status ret = connector_status_disconnected; > + u8 sink_count = 0; > + > + if (mtk_dp_is_edp(mtk_dp)) > + return connector_status_connected; Because edp also have hpd interrupt, so I would like both edp and dp have the same control flow for hdp. So remove this. > + > + if (mtk_dp_plug_state_avoid_pulse(mtk_dp)) { > + drm_dp_dpcd_readb(&mtk_dp->aux, DP_SINK_COUNT, > &sink_count); > + if (DP_GET_SINK_COUNT(sink_count)) > + ret = connector_status_connected; > + } > + > + return ret; > +} > + > static struct edid *mtk_dp_get_edid(struct drm_bridge *bridge, > struct drm_connector *connector) > { > @@ -1512,7 +1603,8 @@ static struct edid *mtk_dp_get_edid(struct > drm_bridge *bridge, > drm_dp_dpcd_writeb(&mtk_dp->aux, DP_SET_POWER, > DP_SET_POWER_D0); > usleep_range(2000, 5000); > > - new_edid = drm_get_edid(connector, &mtk_dp->aux.ddc); > + if (mtk_dp_plug_state(mtk_dp)) > + new_edid = drm_get_edid(connector, &mtk_dp->aux.ddc); Please explain why only dp has this problem. If edp also has this problem, move this to edp patch. Regards, CK > > if (!enabled) > drm_bridge_chain_post_disable(bridge); > @@ -1852,6 +1944,7 @@ static const struct drm_bridge_funcs > mtk_dp_bridge_funcs = { > .atomic_disable = mtk_dp_bridge_atomic_disable, > .mode_valid = mtk_dp_bridge_mode_valid, > .get_edid = mtk_dp_get_edid, > + .detect = mtk_dp_bdg_detect, > }; > > static int mtk_dp_probe(struct platform_device *pdev) > @@ -1873,9 +1966,15 @@ static int mtk_dp_probe(struct platform_device > *pdev) > "failed to request dp irq > resource\n"); > > mtk_dp->next_bridge = devm_drm_of_get_bridge(dev, dev->of_node, > 1, 0); > - if (IS_ERR(mtk_dp->next_bridge)) > + if (IS_ERR(mtk_dp->next_bridge) && > + PTR_ERR(mtk_dp->next_bridge) == -ENODEV) { > + dev_info(dev, > + "No panel connected in devicetree, continue as > external DP\n"); > + mtk_dp->next_bridge = NULL; > + } else if (IS_ERR(mtk_dp->next_bridge)) { > return dev_err_probe(dev, PTR_ERR(mtk_dp->next_bridge), > "Failed to get bridge\n"); > + } > > ret = mtk_dp_dt_parse(mtk_dp, pdev); > if (ret) > @@ -1918,7 +2017,10 @@ static int mtk_dp_probe(struct platform_device > *pdev) > > mtk_dp->bridge.ops = > DRM_BRIDGE_OP_DETECT | DRM_BRIDGE_OP_EDID | > DRM_BRIDGE_OP_HPD; > - mtk_dp->bridge.type = DRM_MODE_CONNECTOR_eDP; > + if (mtk_dp_is_edp(mtk_dp)) > + mtk_dp->bridge.type = DRM_MODE_CONNECTOR_eDP; > + else > + mtk_dp->bridge.type = DRM_MODE_CONNECTOR_DisplayPort; > > drm_bridge_add(&mtk_dp->bridge); > > @@ -1945,6 +2047,12 @@ static int mtk_dp_suspend(struct device *dev) > { > struct mtk_dp *mtk_dp = dev_get_drvdata(dev); > > + if (mtk_dp_plug_state(mtk_dp)) { > + drm_dp_dpcd_writeb(&mtk_dp->aux, DP_SET_POWER, > DP_SET_POWER_D3); > + /* Ensure the sink is off before shutting down power */ > + usleep_range(2000, 3000); > + } > + > mtk_dp_power_disable(mtk_dp); > > mtk_dp_hwirq_enable(mtk_dp, false); > @@ -1978,6 +2086,7 @@ static SIMPLE_DEV_PM_OPS(mtk_dp_pm_ops, > mtk_dp_suspend, mtk_dp_resume); > > static const struct of_device_id mtk_dp_of_match[] = { > { .compatible = "mediatek,mt8195-edp-tx" }, > + { .compatible = "mediatek,mt8195-dp-tx" }, > {}, > }; > MODULE_DEVICE_TABLE(of, mtk_dp_of_match); > diff --git a/drivers/gpu/drm/mediatek/mtk_dp_reg.h > b/drivers/gpu/drm/mediatek/mtk_dp_reg.h > index 4ff8e9880dc9..59086eb82868 100644 > --- a/drivers/gpu/drm/mediatek/mtk_dp_reg.h > +++ b/drivers/gpu/drm/mediatek/mtk_dp_reg.h > @@ -14,6 +14,7 @@ > #define SEC_OFFSET 0x4000 > > #define MTK_DP_SIP_ATF_EDP_VIDEO_UNMUTE (BIT(0) | BIT(5)) > +#define MTK_DP_SIP_ATF_VIDEO_UNMUTE BIT(5) > > #define DP_PHY_GLB_BIAS_GEN_00 0 > #define RG_XTP_GLB_BIAS_INTR_CTRL GENMASK(20, 16)
On Tue, 2022-08-02 at 10:37 +0800, CK Hu wrote: > Hi, Bo-Chen: > > On Wed, 2022-07-27 at 12:50 +0800, Bo-Chen Chen wrote: > > From: Guillaume Ranquet <granquet@baylibre.com> > > > > This patch adds External DisplayPort support to the mt8195 eDP > > driver. > > > > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> > > Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> > > --- > > drivers/gpu/drm/mediatek/mtk_dp.c | 181 +++++++++++++++++++++- > > -- > > -- > > drivers/gpu/drm/mediatek/mtk_dp_reg.h | 1 + > > 2 files changed, 146 insertions(+), 36 deletions(-) > > > > diff --git a/drivers/gpu/drm/mediatek/mtk_dp.c > > b/drivers/gpu/drm/mediatek/mtk_dp.c > > index 06eeecedd49e..ce817cb59445 100644 > > --- a/drivers/gpu/drm/mediatek/mtk_dp.c > > +++ b/drivers/gpu/drm/mediatek/mtk_dp.c > > @@ -103,6 +103,11 @@ static struct regmap_config > > mtk_dp_regmap_config > > = { > > .name = "mtk-dp-registers", > > }; > > > > +static bool mtk_dp_is_edp(struct mtk_dp *mtk_dp) > > +{ > > + return mtk_dp->next_bridge; > > For external DP, it could also connect to a bridge IC which transfer > DP > to HDMI or some interface else. Use the compatible to judge this edp > or > dp. > Hello CK, ok, I will use of device data to do this. > > +} > > + > > static struct mtk_dp *mtk_dp_from_bridge(struct drm_bridge *b) > > { > > return container_of(b, struct mtk_dp, bridge); > > @@ -341,6 +346,19 @@ static void mtk_dp_pg_enable(struct mtk_dp > > *mtk_dp, bool enable) > > 4 << PGEN_PATTERN_SEL_SHIFT, > > PGEN_PATTERN_SEL_MASK); > > } > > > > +static bool mtk_dp_plug_state(struct mtk_dp *mtk_dp) > > +{ > > + return mtk_dp->train_info.cable_plugged_in; > > +} > > + > > +static bool mtk_dp_plug_state_avoid_pulse(struct mtk_dp *mtk_dp) > > +{ > > + bool ret; > > + > > + return !(readx_poll_timeout(mtk_dp_plug_state, mtk_dp, ret, > > ret, > > + 4000, 7 * 4000)); > > +} > > + > > static void mtk_dp_aux_irq_clear(struct mtk_dp *mtk_dp) > > { > > mtk_dp_write(mtk_dp, MTK_DP_AUX_P0_3640, > > @@ -778,35 +796,67 @@ static void > > mtk_dp_get_calibration_data(struct > > mtk_dp *mtk_dp) > > return; > > } > > > > - cal_data->glb_bias_trim = > > - check_cal_data_valid(mtk_dp, 1, 0x1e, > > - (buf[3] >> 27) & 0x1f, 0xf); > > - cal_data->clktx_impse = > > - check_cal_data_valid(mtk_dp, 1, 0xe, > > - (buf[0] >> 9) & 0xf, 0x8); > > - cal_data->ln_tx_impsel_pmos[0] = > > - check_cal_data_valid(mtk_dp, 1, 0xe, > > - (buf[2] >> 28) & 0xf, 0x8); > > - cal_data->ln_tx_impsel_nmos[0] = > > - check_cal_data_valid(mtk_dp, 1, 0xe, > > - (buf[2] >> 24) & 0xf, 0x8); > > - cal_data->ln_tx_impsel_pmos[1] = > > - check_cal_data_valid(mtk_dp, 1, 0xe, > > - (buf[2] >> 20) & 0xf, 0x8); > > - cal_data->ln_tx_impsel_nmos[1] = > > - check_cal_data_valid(mtk_dp, 1, 0xe, > > - (buf[2] >> 16) & 0xf, 0x8); > > - cal_data->ln_tx_impsel_pmos[2] = > > - check_cal_data_valid(mtk_dp, 1, 0xe, > > - (buf[2] >> 12) & 0xf, 0x8); > > - cal_data->ln_tx_impsel_nmos[2] = > > - check_cal_data_valid(mtk_dp, 1, 0xe, > > - (buf[2] >> 8) & 0xf, 0x8); > > - cal_data->ln_tx_impsel_pmos[3] = > > - check_cal_data_valid(mtk_dp, 1, 0xe, > > - (buf[2] >> 4) & 0xf, 0x8); > > - cal_data->ln_tx_impsel_nmos[3] = > > - check_cal_data_valid(mtk_dp, 1, 0xe, buf[2] & 0xf, > > 0x8); > > + if (mtk_dp_is_edp(mtk_dp)) { > > + cal_data->glb_bias_trim = > > + check_cal_data_valid(mtk_dp, 1, 0x1e, > > + (buf[3] >> 27) & 0x1f, > > 0xf); > > + cal_data->clktx_impse = > > + check_cal_data_valid(mtk_dp, 1, 0xe, > > + (buf[0] >> 9) & 0xf, 0x8); > > + cal_data->ln_tx_impsel_pmos[0] = > > + check_cal_data_valid(mtk_dp, 1, 0xe, > > + (buf[2] >> 28) & 0xf, > > 0x8); > > + cal_data->ln_tx_impsel_nmos[0] = > > + check_cal_data_valid(mtk_dp, 1, 0xe, > > + (buf[2] >> 24) & 0xf, > > 0x8); > > + cal_data->ln_tx_impsel_pmos[1] = > > + check_cal_data_valid(mtk_dp, 1, 0xe, > > + (buf[2] >> 20) & 0xf, > > 0x8); > > + cal_data->ln_tx_impsel_nmos[1] = > > + check_cal_data_valid(mtk_dp, 1, 0xe, > > + (buf[2] >> 16) & 0xf, > > 0x8); > > + cal_data->ln_tx_impsel_pmos[2] = > > + check_cal_data_valid(mtk_dp, 1, 0xe, > > + (buf[2] >> 12) & 0xf, > > 0x8); > > + cal_data->ln_tx_impsel_nmos[2] = > > + check_cal_data_valid(mtk_dp, 1, 0xe, > > + (buf[2] >> 8) & 0xf, 0x8); > > + cal_data->ln_tx_impsel_pmos[3] = > > + check_cal_data_valid(mtk_dp, 1, 0xe, > > + (buf[2] >> 4) & 0xf, 0x8); > > + cal_data->ln_tx_impsel_nmos[3] = > > + check_cal_data_valid(mtk_dp, 1, 0xe, buf[2] & > > 0xf, 0x8); > > + } else { > > + cal_data->glb_bias_trim = > > + check_cal_data_valid(mtk_dp, 1, 0x1e, > > + (buf[0] >> 27) & 0x1f, > > 0xf); > > Why not place glb_bias_trim value in nvmem buf[3] for both edp and dp > case? Place in the same nvmem position, the driver code would be > simple. > These value are read from efuse data. do you mean change the order in this dp driver? Is so, I think it's not appropriate. It will be hard to debug if any issue occurs. > > + cal_data->clktx_impse = > > + check_cal_data_valid(mtk_dp, 1, 0xe, > > + (buf[0] >> 13) & 0xf, > > 0x8); > > + cal_data->ln_tx_impsel_pmos[0] = > > + check_cal_data_valid(mtk_dp, 1, 0xe, > > + (buf[1] >> 28) & 0xf, > > 0x8); > > + cal_data->ln_tx_impsel_nmos[0] = > > + check_cal_data_valid(mtk_dp, 1, 0xe, > > + (buf[1] >> 24) & 0xf, > > 0x8); > > + cal_data->ln_tx_impsel_pmos[1] = > > + check_cal_data_valid(mtk_dp, 1, 0xe, > > + (buf[1] >> 20) & 0xf, > > 0x8); > > + cal_data->ln_tx_impsel_nmos[1] = > > + check_cal_data_valid(mtk_dp, 1, 0xe, > > + (buf[1] >> 16) & 0xf, > > 0x8); > > + cal_data->ln_tx_impsel_pmos[2] = > > + check_cal_data_valid(mtk_dp, 1, 0xe, > > + (buf[1] >> 12) & 0xf, > > 0x8); > > + cal_data->ln_tx_impsel_nmos[2] = > > + check_cal_data_valid(mtk_dp, 1, 0xe, > > + (buf[1] >> 8) & 0xf, 0x8); > > + cal_data->ln_tx_impsel_pmos[3] = > > + check_cal_data_valid(mtk_dp, 1, 0xe, > > + (buf[1] >> 4) & 0xf, 0x8); > > + cal_data->ln_tx_impsel_nmos[3] = > > + check_cal_data_valid(mtk_dp, 1, 0xe, buf[1] & > > 0xf, 0x8); > > Why not place ln_tx_impsel_nmos and ln_tx_impsel_pmos value in nvmem > buf[2] for both edp and dp case? Place in the same nvmem position, > the > driver code would be simple. > > > + } > > > > kfree(buf); > > } > > @@ -926,7 +976,10 @@ static void mtk_dp_video_mute(struct mtk_dp > > *mtk_dp, bool enable) > > VIDEO_MUTE_SEL_DP_ENC0_P0_MASK | > > VIDEO_MUTE_SW_DP_ENC0_P0_MASK); > > > > - mtk_dp_sip_atf_call(mtk_dp, MTK_DP_SIP_ATF_EDP_VIDEO_UNMUTE, > > enable); > > + mtk_dp_sip_atf_call(mtk_dp, > > + mtk_dp_is_edp(mtk_dp) ? > > + MTK_DP_SIP_ATF_EDP_VIDEO_UNMUTE : > > + MTK_DP_SIP_ATF_VIDEO_UNMUTE, enable); > > Use of_device_get_match_data to select > MTK_DP_SIP_ATF_EDP_VIDEO_UNMUTE > or MTK_DP_SIP_ATF_VIDEO_UNMUTE. > Do you mean add a new variable to control this in of device match data? BRs, Bo-Chen > > } > > > > static void mtk_dp_power_enable(struct mtk_dp *mtk_dp) > > @@ -1226,6 +1279,9 @@ static int mtk_dp_parse_capabilities(struct > > mtk_dp *mtk_dp) > > drm_dp_dpcd_writeb(&mtk_dp->aux, DP_SET_POWER, > > DP_SET_POWER_D0); > > usleep_range(2000, 5000); > > > > + if (!mtk_dp_plug_state(mtk_dp)) > > + return -ENODEV; > > + > > drm_dp_read_dpcd_caps(&mtk_dp->aux, mtk_dp->rx_cap); > > > > train_info->link_rate = min_t(int, mtk_dp->max_linkrate, > > @@ -1277,6 +1333,9 @@ static int mtk_dp_train_start(struct mtk_dp > > *mtk_dp) > > u8 train_limit; > > u8 max_link_rate; > > > > + if (!mtk_dp_plug_state_avoid_pulse(mtk_dp)) > > + return -ENODEV; > > + > > link_rate = mtk_dp->rx_cap[1]; > > lane_count = mtk_dp->rx_cap[2] & 0x1F; > > > > @@ -1412,6 +1471,9 @@ static irqreturn_t > > mtk_dp_hpd_event_thread(int > > hpd, void *dev) > > { > > struct mtk_dp *mtk_dp = dev; > > > > + dev_dbg(mtk_dp->dev, "drm_helper_hpd_irq_event\n"); > > + drm_helper_hpd_irq_event(mtk_dp->bridge.dev); > > Because edp also have hpd interrupt, so I would like both edp and dp > have the same control flow for hdp. So move this to edp patch. > > > + > > if (mtk_dp->train_info.hpd_inerrupt) { > > dev_dbg(mtk_dp->dev, "MTK_DP_HPD_INTERRUPT\n"); > > mtk_dp->train_info.hpd_inerrupt = false; > > @@ -1452,9 +1514,20 @@ static irqreturn_t mtk_dp_hpd_event(int hpd, > > void *dev) > > else > > train_info->cable_plugged_in = false; > > > > - mtk_dp_update_bits(mtk_dp, MTK_DP_TOP_PWR_STATE, > > - DP_PWR_STATE_BANDGAP_TPLL_LANE, > > - DP_PWR_STATE_MASK); > > + if (!train_info->cable_plugged_in) { > > + mtk_dp_video_mute(mtk_dp, true); > > + > > + mtk_dp_initialize_priv_data(mtk_dp); > > + mtk_dp_set_idle_pattern(mtk_dp, true); > > + > > + mtk_dp_update_bits(mtk_dp, > > MTK_DP_TOP_PWR_STATE, > > + DP_PWR_STATE_BANDGAP_TPLL, > > + DP_PWR_STATE_MASK); > > + } else { > > + mtk_dp_update_bits(mtk_dp, > > MTK_DP_TOP_PWR_STATE, > > + DP_PWR_STATE_BANDGAP_TPLL_LA > > NE, > > + DP_PWR_STATE_MASK); > > + } > > } > > > > return IRQ_HANDLED; > > @@ -1499,6 +1572,24 @@ static int mtk_dp_dt_parse(struct mtk_dp > > *mtk_dp, > > return 0; > > } > > > > +static enum drm_connector_status mtk_dp_bdg_detect(struct > > drm_bridge > > *bridge) > > +{ > > + struct mtk_dp *mtk_dp = mtk_dp_from_bridge(bridge); > > + enum drm_connector_status ret = connector_status_disconnected; > > + u8 sink_count = 0; > > + > > + if (mtk_dp_is_edp(mtk_dp)) > > + return connector_status_connected; > > Because edp also have hpd interrupt, so I would like both edp and dp > have the same control flow for hdp. So remove this. > > > + > > + if (mtk_dp_plug_state_avoid_pulse(mtk_dp)) { > > + drm_dp_dpcd_readb(&mtk_dp->aux, DP_SINK_COUNT, > > &sink_count); > > + if (DP_GET_SINK_COUNT(sink_count)) > > + ret = connector_status_connected; > > + } > > + > > + return ret; > > +} > > + > > static struct edid *mtk_dp_get_edid(struct drm_bridge *bridge, > > struct drm_connector *connector) > > { > > @@ -1512,7 +1603,8 @@ static struct edid *mtk_dp_get_edid(struct > > drm_bridge *bridge, > > drm_dp_dpcd_writeb(&mtk_dp->aux, DP_SET_POWER, > > DP_SET_POWER_D0); > > usleep_range(2000, 5000); > > > > - new_edid = drm_get_edid(connector, &mtk_dp->aux.ddc); > > + if (mtk_dp_plug_state(mtk_dp)) > > + new_edid = drm_get_edid(connector, &mtk_dp->aux.ddc); > > Please explain why only dp has this problem. If edp also has this > problem, move this to edp patch. > > Regards, > CK > > > > > if (!enabled) > > drm_bridge_chain_post_disable(bridge); > > @@ -1852,6 +1944,7 @@ static const struct drm_bridge_funcs > > mtk_dp_bridge_funcs = { > > .atomic_disable = mtk_dp_bridge_atomic_disable, > > .mode_valid = mtk_dp_bridge_mode_valid, > > .get_edid = mtk_dp_get_edid, > > + .detect = mtk_dp_bdg_detect, > > }; > > > > static int mtk_dp_probe(struct platform_device *pdev) > > @@ -1873,9 +1966,15 @@ static int mtk_dp_probe(struct > > platform_device > > *pdev) > > "failed to request dp irq > > resource\n"); > > > > mtk_dp->next_bridge = devm_drm_of_get_bridge(dev, dev- > > >of_node, > > 1, 0); > > - if (IS_ERR(mtk_dp->next_bridge)) > > + if (IS_ERR(mtk_dp->next_bridge) && > > + PTR_ERR(mtk_dp->next_bridge) == -ENODEV) { > > + dev_info(dev, > > + "No panel connected in devicetree, continue as > > external DP\n"); > > + mtk_dp->next_bridge = NULL; > > + } else if (IS_ERR(mtk_dp->next_bridge)) { > > return dev_err_probe(dev, PTR_ERR(mtk_dp->next_bridge), > > "Failed to get bridge\n"); > > + } > > > > ret = mtk_dp_dt_parse(mtk_dp, pdev); > > if (ret) > > @@ -1918,7 +2017,10 @@ static int mtk_dp_probe(struct > > platform_device > > *pdev) > > > > mtk_dp->bridge.ops = > > DRM_BRIDGE_OP_DETECT | DRM_BRIDGE_OP_EDID | > > DRM_BRIDGE_OP_HPD; > > - mtk_dp->bridge.type = DRM_MODE_CONNECTOR_eDP; > > + if (mtk_dp_is_edp(mtk_dp)) > > + mtk_dp->bridge.type = DRM_MODE_CONNECTOR_eDP; > > + else > > + mtk_dp->bridge.type = DRM_MODE_CONNECTOR_DisplayPort; > > > > drm_bridge_add(&mtk_dp->bridge); > > > > @@ -1945,6 +2047,12 @@ static int mtk_dp_suspend(struct device > > *dev) > > { > > struct mtk_dp *mtk_dp = dev_get_drvdata(dev); > > > > + if (mtk_dp_plug_state(mtk_dp)) { > > + drm_dp_dpcd_writeb(&mtk_dp->aux, DP_SET_POWER, > > DP_SET_POWER_D3); > > + /* Ensure the sink is off before shutting down power */ > > + usleep_range(2000, 3000); > > + } > > + > > mtk_dp_power_disable(mtk_dp); > > > > mtk_dp_hwirq_enable(mtk_dp, false); > > @@ -1978,6 +2086,7 @@ static SIMPLE_DEV_PM_OPS(mtk_dp_pm_ops, > > mtk_dp_suspend, mtk_dp_resume); > > > > static const struct of_device_id mtk_dp_of_match[] = { > > { .compatible = "mediatek,mt8195-edp-tx" }, > > + { .compatible = "mediatek,mt8195-dp-tx" }, > > {}, > > }; > > MODULE_DEVICE_TABLE(of, mtk_dp_of_match); > > diff --git a/drivers/gpu/drm/mediatek/mtk_dp_reg.h > > b/drivers/gpu/drm/mediatek/mtk_dp_reg.h > > index 4ff8e9880dc9..59086eb82868 100644 > > --- a/drivers/gpu/drm/mediatek/mtk_dp_reg.h > > +++ b/drivers/gpu/drm/mediatek/mtk_dp_reg.h > > @@ -14,6 +14,7 @@ > > #define SEC_OFFSET 0x4000 > > > > #define MTK_DP_SIP_ATF_EDP_VIDEO_UNMUTE (BIT(0) | BIT(5)) > > +#define MTK_DP_SIP_ATF_VIDEO_UNMUTE BIT(5) > > > > #define DP_PHY_GLB_BIAS_GEN_00 0 > > #define RG_XTP_GLB_BIAS_INTR_CTRL GENMASK(20, 16) > >
diff --git a/drivers/gpu/drm/mediatek/mtk_dp.c b/drivers/gpu/drm/mediatek/mtk_dp.c index 06eeecedd49e..ce817cb59445 100644 --- a/drivers/gpu/drm/mediatek/mtk_dp.c +++ b/drivers/gpu/drm/mediatek/mtk_dp.c @@ -103,6 +103,11 @@ static struct regmap_config mtk_dp_regmap_config = { .name = "mtk-dp-registers", }; +static bool mtk_dp_is_edp(struct mtk_dp *mtk_dp) +{ + return mtk_dp->next_bridge; +} + static struct mtk_dp *mtk_dp_from_bridge(struct drm_bridge *b) { return container_of(b, struct mtk_dp, bridge); @@ -341,6 +346,19 @@ static void mtk_dp_pg_enable(struct mtk_dp *mtk_dp, bool enable) 4 << PGEN_PATTERN_SEL_SHIFT, PGEN_PATTERN_SEL_MASK); } +static bool mtk_dp_plug_state(struct mtk_dp *mtk_dp) +{ + return mtk_dp->train_info.cable_plugged_in; +} + +static bool mtk_dp_plug_state_avoid_pulse(struct mtk_dp *mtk_dp) +{ + bool ret; + + return !(readx_poll_timeout(mtk_dp_plug_state, mtk_dp, ret, ret, + 4000, 7 * 4000)); +} + static void mtk_dp_aux_irq_clear(struct mtk_dp *mtk_dp) { mtk_dp_write(mtk_dp, MTK_DP_AUX_P0_3640, @@ -778,35 +796,67 @@ static void mtk_dp_get_calibration_data(struct mtk_dp *mtk_dp) return; } - cal_data->glb_bias_trim = - check_cal_data_valid(mtk_dp, 1, 0x1e, - (buf[3] >> 27) & 0x1f, 0xf); - cal_data->clktx_impse = - check_cal_data_valid(mtk_dp, 1, 0xe, - (buf[0] >> 9) & 0xf, 0x8); - cal_data->ln_tx_impsel_pmos[0] = - check_cal_data_valid(mtk_dp, 1, 0xe, - (buf[2] >> 28) & 0xf, 0x8); - cal_data->ln_tx_impsel_nmos[0] = - check_cal_data_valid(mtk_dp, 1, 0xe, - (buf[2] >> 24) & 0xf, 0x8); - cal_data->ln_tx_impsel_pmos[1] = - check_cal_data_valid(mtk_dp, 1, 0xe, - (buf[2] >> 20) & 0xf, 0x8); - cal_data->ln_tx_impsel_nmos[1] = - check_cal_data_valid(mtk_dp, 1, 0xe, - (buf[2] >> 16) & 0xf, 0x8); - cal_data->ln_tx_impsel_pmos[2] = - check_cal_data_valid(mtk_dp, 1, 0xe, - (buf[2] >> 12) & 0xf, 0x8); - cal_data->ln_tx_impsel_nmos[2] = - check_cal_data_valid(mtk_dp, 1, 0xe, - (buf[2] >> 8) & 0xf, 0x8); - cal_data->ln_tx_impsel_pmos[3] = - check_cal_data_valid(mtk_dp, 1, 0xe, - (buf[2] >> 4) & 0xf, 0x8); - cal_data->ln_tx_impsel_nmos[3] = - check_cal_data_valid(mtk_dp, 1, 0xe, buf[2] & 0xf, 0x8); + if (mtk_dp_is_edp(mtk_dp)) { + cal_data->glb_bias_trim = + check_cal_data_valid(mtk_dp, 1, 0x1e, + (buf[3] >> 27) & 0x1f, 0xf); + cal_data->clktx_impse = + check_cal_data_valid(mtk_dp, 1, 0xe, + (buf[0] >> 9) & 0xf, 0x8); + cal_data->ln_tx_impsel_pmos[0] = + check_cal_data_valid(mtk_dp, 1, 0xe, + (buf[2] >> 28) & 0xf, 0x8); + cal_data->ln_tx_impsel_nmos[0] = + check_cal_data_valid(mtk_dp, 1, 0xe, + (buf[2] >> 24) & 0xf, 0x8); + cal_data->ln_tx_impsel_pmos[1] = + check_cal_data_valid(mtk_dp, 1, 0xe, + (buf[2] >> 20) & 0xf, 0x8); + cal_data->ln_tx_impsel_nmos[1] = + check_cal_data_valid(mtk_dp, 1, 0xe, + (buf[2] >> 16) & 0xf, 0x8); + cal_data->ln_tx_impsel_pmos[2] = + check_cal_data_valid(mtk_dp, 1, 0xe, + (buf[2] >> 12) & 0xf, 0x8); + cal_data->ln_tx_impsel_nmos[2] = + check_cal_data_valid(mtk_dp, 1, 0xe, + (buf[2] >> 8) & 0xf, 0x8); + cal_data->ln_tx_impsel_pmos[3] = + check_cal_data_valid(mtk_dp, 1, 0xe, + (buf[2] >> 4) & 0xf, 0x8); + cal_data->ln_tx_impsel_nmos[3] = + check_cal_data_valid(mtk_dp, 1, 0xe, buf[2] & 0xf, 0x8); + } else { + cal_data->glb_bias_trim = + check_cal_data_valid(mtk_dp, 1, 0x1e, + (buf[0] >> 27) & 0x1f, 0xf); + cal_data->clktx_impse = + check_cal_data_valid(mtk_dp, 1, 0xe, + (buf[0] >> 13) & 0xf, 0x8); + cal_data->ln_tx_impsel_pmos[0] = + check_cal_data_valid(mtk_dp, 1, 0xe, + (buf[1] >> 28) & 0xf, 0x8); + cal_data->ln_tx_impsel_nmos[0] = + check_cal_data_valid(mtk_dp, 1, 0xe, + (buf[1] >> 24) & 0xf, 0x8); + cal_data->ln_tx_impsel_pmos[1] = + check_cal_data_valid(mtk_dp, 1, 0xe, + (buf[1] >> 20) & 0xf, 0x8); + cal_data->ln_tx_impsel_nmos[1] = + check_cal_data_valid(mtk_dp, 1, 0xe, + (buf[1] >> 16) & 0xf, 0x8); + cal_data->ln_tx_impsel_pmos[2] = + check_cal_data_valid(mtk_dp, 1, 0xe, + (buf[1] >> 12) & 0xf, 0x8); + cal_data->ln_tx_impsel_nmos[2] = + check_cal_data_valid(mtk_dp, 1, 0xe, + (buf[1] >> 8) & 0xf, 0x8); + cal_data->ln_tx_impsel_pmos[3] = + check_cal_data_valid(mtk_dp, 1, 0xe, + (buf[1] >> 4) & 0xf, 0x8); + cal_data->ln_tx_impsel_nmos[3] = + check_cal_data_valid(mtk_dp, 1, 0xe, buf[1] & 0xf, 0x8); + } kfree(buf); } @@ -926,7 +976,10 @@ static void mtk_dp_video_mute(struct mtk_dp *mtk_dp, bool enable) VIDEO_MUTE_SEL_DP_ENC0_P0_MASK | VIDEO_MUTE_SW_DP_ENC0_P0_MASK); - mtk_dp_sip_atf_call(mtk_dp, MTK_DP_SIP_ATF_EDP_VIDEO_UNMUTE, enable); + mtk_dp_sip_atf_call(mtk_dp, + mtk_dp_is_edp(mtk_dp) ? + MTK_DP_SIP_ATF_EDP_VIDEO_UNMUTE : + MTK_DP_SIP_ATF_VIDEO_UNMUTE, enable); } static void mtk_dp_power_enable(struct mtk_dp *mtk_dp) @@ -1226,6 +1279,9 @@ static int mtk_dp_parse_capabilities(struct mtk_dp *mtk_dp) drm_dp_dpcd_writeb(&mtk_dp->aux, DP_SET_POWER, DP_SET_POWER_D0); usleep_range(2000, 5000); + if (!mtk_dp_plug_state(mtk_dp)) + return -ENODEV; + drm_dp_read_dpcd_caps(&mtk_dp->aux, mtk_dp->rx_cap); train_info->link_rate = min_t(int, mtk_dp->max_linkrate, @@ -1277,6 +1333,9 @@ static int mtk_dp_train_start(struct mtk_dp *mtk_dp) u8 train_limit; u8 max_link_rate; + if (!mtk_dp_plug_state_avoid_pulse(mtk_dp)) + return -ENODEV; + link_rate = mtk_dp->rx_cap[1]; lane_count = mtk_dp->rx_cap[2] & 0x1F; @@ -1412,6 +1471,9 @@ static irqreturn_t mtk_dp_hpd_event_thread(int hpd, void *dev) { struct mtk_dp *mtk_dp = dev; + dev_dbg(mtk_dp->dev, "drm_helper_hpd_irq_event\n"); + drm_helper_hpd_irq_event(mtk_dp->bridge.dev); + if (mtk_dp->train_info.hpd_inerrupt) { dev_dbg(mtk_dp->dev, "MTK_DP_HPD_INTERRUPT\n"); mtk_dp->train_info.hpd_inerrupt = false; @@ -1452,9 +1514,20 @@ static irqreturn_t mtk_dp_hpd_event(int hpd, void *dev) else train_info->cable_plugged_in = false; - mtk_dp_update_bits(mtk_dp, MTK_DP_TOP_PWR_STATE, - DP_PWR_STATE_BANDGAP_TPLL_LANE, - DP_PWR_STATE_MASK); + if (!train_info->cable_plugged_in) { + mtk_dp_video_mute(mtk_dp, true); + + mtk_dp_initialize_priv_data(mtk_dp); + mtk_dp_set_idle_pattern(mtk_dp, true); + + mtk_dp_update_bits(mtk_dp, MTK_DP_TOP_PWR_STATE, + DP_PWR_STATE_BANDGAP_TPLL, + DP_PWR_STATE_MASK); + } else { + mtk_dp_update_bits(mtk_dp, MTK_DP_TOP_PWR_STATE, + DP_PWR_STATE_BANDGAP_TPLL_LANE, + DP_PWR_STATE_MASK); + } } return IRQ_HANDLED; @@ -1499,6 +1572,24 @@ static int mtk_dp_dt_parse(struct mtk_dp *mtk_dp, return 0; } +static enum drm_connector_status mtk_dp_bdg_detect(struct drm_bridge *bridge) +{ + struct mtk_dp *mtk_dp = mtk_dp_from_bridge(bridge); + enum drm_connector_status ret = connector_status_disconnected; + u8 sink_count = 0; + + if (mtk_dp_is_edp(mtk_dp)) + return connector_status_connected; + + if (mtk_dp_plug_state_avoid_pulse(mtk_dp)) { + drm_dp_dpcd_readb(&mtk_dp->aux, DP_SINK_COUNT, &sink_count); + if (DP_GET_SINK_COUNT(sink_count)) + ret = connector_status_connected; + } + + return ret; +} + static struct edid *mtk_dp_get_edid(struct drm_bridge *bridge, struct drm_connector *connector) { @@ -1512,7 +1603,8 @@ static struct edid *mtk_dp_get_edid(struct drm_bridge *bridge, drm_dp_dpcd_writeb(&mtk_dp->aux, DP_SET_POWER, DP_SET_POWER_D0); usleep_range(2000, 5000); - new_edid = drm_get_edid(connector, &mtk_dp->aux.ddc); + if (mtk_dp_plug_state(mtk_dp)) + new_edid = drm_get_edid(connector, &mtk_dp->aux.ddc); if (!enabled) drm_bridge_chain_post_disable(bridge); @@ -1852,6 +1944,7 @@ static const struct drm_bridge_funcs mtk_dp_bridge_funcs = { .atomic_disable = mtk_dp_bridge_atomic_disable, .mode_valid = mtk_dp_bridge_mode_valid, .get_edid = mtk_dp_get_edid, + .detect = mtk_dp_bdg_detect, }; static int mtk_dp_probe(struct platform_device *pdev) @@ -1873,9 +1966,15 @@ static int mtk_dp_probe(struct platform_device *pdev) "failed to request dp irq resource\n"); mtk_dp->next_bridge = devm_drm_of_get_bridge(dev, dev->of_node, 1, 0); - if (IS_ERR(mtk_dp->next_bridge)) + if (IS_ERR(mtk_dp->next_bridge) && + PTR_ERR(mtk_dp->next_bridge) == -ENODEV) { + dev_info(dev, + "No panel connected in devicetree, continue as external DP\n"); + mtk_dp->next_bridge = NULL; + } else if (IS_ERR(mtk_dp->next_bridge)) { return dev_err_probe(dev, PTR_ERR(mtk_dp->next_bridge), "Failed to get bridge\n"); + } ret = mtk_dp_dt_parse(mtk_dp, pdev); if (ret) @@ -1918,7 +2017,10 @@ static int mtk_dp_probe(struct platform_device *pdev) mtk_dp->bridge.ops = DRM_BRIDGE_OP_DETECT | DRM_BRIDGE_OP_EDID | DRM_BRIDGE_OP_HPD; - mtk_dp->bridge.type = DRM_MODE_CONNECTOR_eDP; + if (mtk_dp_is_edp(mtk_dp)) + mtk_dp->bridge.type = DRM_MODE_CONNECTOR_eDP; + else + mtk_dp->bridge.type = DRM_MODE_CONNECTOR_DisplayPort; drm_bridge_add(&mtk_dp->bridge); @@ -1945,6 +2047,12 @@ static int mtk_dp_suspend(struct device *dev) { struct mtk_dp *mtk_dp = dev_get_drvdata(dev); + if (mtk_dp_plug_state(mtk_dp)) { + drm_dp_dpcd_writeb(&mtk_dp->aux, DP_SET_POWER, DP_SET_POWER_D3); + /* Ensure the sink is off before shutting down power */ + usleep_range(2000, 3000); + } + mtk_dp_power_disable(mtk_dp); mtk_dp_hwirq_enable(mtk_dp, false); @@ -1978,6 +2086,7 @@ static SIMPLE_DEV_PM_OPS(mtk_dp_pm_ops, mtk_dp_suspend, mtk_dp_resume); static const struct of_device_id mtk_dp_of_match[] = { { .compatible = "mediatek,mt8195-edp-tx" }, + { .compatible = "mediatek,mt8195-dp-tx" }, {}, }; MODULE_DEVICE_TABLE(of, mtk_dp_of_match); diff --git a/drivers/gpu/drm/mediatek/mtk_dp_reg.h b/drivers/gpu/drm/mediatek/mtk_dp_reg.h index 4ff8e9880dc9..59086eb82868 100644 --- a/drivers/gpu/drm/mediatek/mtk_dp_reg.h +++ b/drivers/gpu/drm/mediatek/mtk_dp_reg.h @@ -14,6 +14,7 @@ #define SEC_OFFSET 0x4000 #define MTK_DP_SIP_ATF_EDP_VIDEO_UNMUTE (BIT(0) | BIT(5)) +#define MTK_DP_SIP_ATF_VIDEO_UNMUTE BIT(5) #define DP_PHY_GLB_BIAS_GEN_00 0 #define RG_XTP_GLB_BIAS_INTR_CTRL GENMASK(20, 16)