diff mbox series

[v2] usb: dwc3: qcom: Defer dwc3-qcom probe if dwc3 isn't probed properly

Message ID 1657891312-21748-1-git-send-email-quic_kriskura@quicinc.com
State Superseded
Headers show
Series [v2] usb: dwc3: qcom: Defer dwc3-qcom probe if dwc3 isn't probed properly | expand

Commit Message

Krishna Kurapati July 15, 2022, 1:21 p.m. UTC
On SC7180 devices, it is observed that dwc3 probing is deferred
because device_links_check_suppliers() finds that '88e3000.phy'
isn't ready yet.

As a part of its probe call, dwc3-qcom driver checks if dwc3 core
is wakeup capable or not. If the dwc3 core is wakeup capable, driver
configures dwc-qcom's power domain to be always ON. Also it configures
dp/dm interrupts accordingly to support wakeup from system suspend.

More info regarding the same can be found at:
commit d9be8d5c5b03 ("usb: dwc3: qcom: Keep power domain on to retain controller status")
commit 6895ea55c385 ("usb: dwc3: qcom: Configure wakeup interrupts during suspend")

In the event, dwc3 probe gets deferred and is processed after dwc3-qcom
probe, driver ends up reading the wakeup capability of dwc3 core as false
leading to instability in suspend/resume path.

To avoid this scenario, ensure dwc3_probe is successful by checking
if appropriate driver is assigned to it or not after the of_platform_populate
call. If it isn't then defer dwc3-qcom probe as well.

Fixes: 649f5c842ba3 ("usb: dwc3: core: Host wake up support from system suspend")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
---
v2: Set return value to EPROBE_DEFER to drop reference to dwc3 node

 drivers/usb/dwc3/dwc3-qcom.c | 3 +++
 1 file changed, 3 insertions(+)

Comments

Matthias Kaehlcke July 15, 2022, 8:41 p.m. UTC | #1
On Fri, Jul 15, 2022 at 06:51:52PM +0530, Krishna Kurapati wrote:

> Subject: usb: dwc3: qcom: Defer dwc3-qcom probe if dwc3 isn't probed properly

nit: "isn't probed properly" sounds like a bug or HW issue. In case
you re-spin maybe change it to "hasn't probed yet" or similar.

> On SC7180 devices, it is observed that dwc3 probing is deferred
> because device_links_check_suppliers() finds that '88e3000.phy'
> isn't ready yet.
> 
> As a part of its probe call, dwc3-qcom driver checks if dwc3 core
> is wakeup capable or not. If the dwc3 core is wakeup capable, driver
> configures dwc-qcom's power domain to be always ON. Also it configures
> dp/dm interrupts accordingly to support wakeup from system suspend.
> 
> More info regarding the same can be found at:
> commit d9be8d5c5b03 ("usb: dwc3: qcom: Keep power domain on to retain controller status")
> commit 6895ea55c385 ("usb: dwc3: qcom: Configure wakeup interrupts during suspend")
> 
> In the event, dwc3 probe gets deferred and is processed after dwc3-qcom
> probe, driver ends up reading the wakeup capability of dwc3 core as false
> leading to instability in suspend/resume path.
> 
> To avoid this scenario, ensure dwc3_probe is successful by checking
> if appropriate driver is assigned to it or not after the of_platform_populate
> call. If it isn't then defer dwc3-qcom probe as well.
> 
> Fixes: 649f5c842ba3 ("usb: dwc3: core: Host wake up support from system suspend")
> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>

Reported-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>

Please make sure to add reviewers of previous versions or other folks you
would like to review your patches in cc. I found v2 accidentally while
looking for something else.
Krishna Kurapati July 16, 2022, 4:13 a.m. UTC | #2
On 7/16/2022 2:11 AM, Matthias Kaehlcke wrote:
> On Fri, Jul 15, 2022 at 06:51:52PM +0530, Krishna Kurapati wrote:
>
>> Subject: usb: dwc3: qcom: Defer dwc3-qcom probe if dwc3 isn't probed properly
> nit: "isn't probed properly" sounds like a bug or HW issue. In case
> you re-spin maybe change it to "hasn't probed yet" or similar.
>
>> On SC7180 devices, it is observed that dwc3 probing is deferred
>> because device_links_check_suppliers() finds that '88e3000.phy'
>> isn't ready yet.
>>
>> As a part of its probe call, dwc3-qcom driver checks if dwc3 core
>> is wakeup capable or not. If the dwc3 core is wakeup capable, driver
>> configures dwc-qcom's power domain to be always ON. Also it configures
>> dp/dm interrupts accordingly to support wakeup from system suspend.
>>
>> More info regarding the same can be found at:
>> commit d9be8d5c5b03 ("usb: dwc3: qcom: Keep power domain on to retain controller status")
>> commit 6895ea55c385 ("usb: dwc3: qcom: Configure wakeup interrupts during suspend")
>>
>> In the event, dwc3 probe gets deferred and is processed after dwc3-qcom
>> probe, driver ends up reading the wakeup capability of dwc3 core as false
>> leading to instability in suspend/resume path.
>>
>> To avoid this scenario, ensure dwc3_probe is successful by checking
>> if appropriate driver is assigned to it or not after the of_platform_populate
>> call. If it isn't then defer dwc3-qcom probe as well.
>>
>> Fixes: 649f5c842ba3 ("usb: dwc3: core: Host wake up support from system suspend")
>> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
> Reported-by: Matthias Kaehlcke <mka@chromium.org>
> Tested-by: Matthias Kaehlcke <mka@chromium.org>
> Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
>
> Please make sure to add reviewers of previous versions or other folks you
> would like to review your patches in cc. I found v2 accidentally while
> looking for something else.
Hi Mathias,
     Sure, Thanks for the review.
Matthias Kaehlcke July 27, 2022, 5:31 p.m. UTC | #3
On Fri, Jul 15, 2022 at 01:41:57PM -0700, Matthias Kaehlcke wrote:
> On Fri, Jul 15, 2022 at 06:51:52PM +0530, Krishna Kurapati wrote:
> 
> > Subject: usb: dwc3: qcom: Defer dwc3-qcom probe if dwc3 isn't probed properly
> 
> nit: "isn't probed properly" sounds like a bug or HW issue. In case
> you re-spin maybe change it to "hasn't probed yet" or similar.
> 
> > On SC7180 devices, it is observed that dwc3 probing is deferred
> > because device_links_check_suppliers() finds that '88e3000.phy'
> > isn't ready yet.
> > 
> > As a part of its probe call, dwc3-qcom driver checks if dwc3 core
> > is wakeup capable or not. If the dwc3 core is wakeup capable, driver
> > configures dwc-qcom's power domain to be always ON. Also it configures
> > dp/dm interrupts accordingly to support wakeup from system suspend.
> > 
> > More info regarding the same can be found at:
> > commit d9be8d5c5b03 ("usb: dwc3: qcom: Keep power domain on to retain controller status")
> > commit 6895ea55c385 ("usb: dwc3: qcom: Configure wakeup interrupts during suspend")
> > 
> > In the event, dwc3 probe gets deferred and is processed after dwc3-qcom
> > probe, driver ends up reading the wakeup capability of dwc3 core as false
> > leading to instability in suspend/resume path.
> > 
> > To avoid this scenario, ensure dwc3_probe is successful by checking
> > if appropriate driver is assigned to it or not after the of_platform_populate
> > call. If it isn't then defer dwc3-qcom probe as well.
> > 
> > Fixes: 649f5c842ba3 ("usb: dwc3: core: Host wake up support from system suspend")
> > Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
> 
> Reported-by: Matthias Kaehlcke <mka@chromium.org>
> Tested-by: Matthias Kaehlcke <mka@chromium.org>
> Reviewed-by: Matthias Kaehlcke <mka@chromium.org>

(attempt to 'summarize' and move the discussion from v1 [1] to here)

gregkh> Why not limit this check to a device type like your changelog mentions?

mka> It is not an sc7180 specific issue. It can occur on any platform where the
mka> dwc3 core has supplies that aren't ready when the dwc3-qcom driver probes.
mka>
mka> It won't blow up right away since it requires 'wakeup-source' to be set for
mka> the dwc3 core, which currently is only the case for 'usb@a600000' of the
mka> sc7280 AFAIK (I set it for sc7180 in my tree for testing, which is when I
mka> found the issue this patch intends to address).

krishna> As Mathias pointed out, no issue was seen so far on present QC targets
krishna> as wakeup-source property was added recently and only for SC7180 and
krishna> SC7280. We ran into some issues like wakeup from system suspend in
krishna> host mode wasn't happening although we enabled wakeup-source in SC7180
krishna> that eventually led us to this bug. But, we tried to add debug prints
krishna> to follow the code flow and see that the issue is present on SM8350
krishna> as well : "supplier 88e9000.phy-wrapper not ready" and deferring dwc3
krishna> probe. This doesn't seem to be specific to SC7180.
krishna>
krishna> Since this is seen on multiple platforms, can we go ahead without
krishna> having any platforms specific checks in the code as in V2 version ?

[1] https://lore.kernel.org/all/YtAv1U1VYkhIY1GA@kroah.com/t/#m6714bf1f2309cfe8be92e6c270ef2a99a9b09ac6
Johan Hovold Aug. 2, 2022, 4:10 p.m. UTC | #4
On Fri, Jul 15, 2022 at 06:51:52PM +0530, Krishna Kurapati wrote:
> On SC7180 devices, it is observed that dwc3 probing is deferred
> because device_links_check_suppliers() finds that '88e3000.phy'
> isn't ready yet.
> 
> As a part of its probe call, dwc3-qcom driver checks if dwc3 core
> is wakeup capable or not. If the dwc3 core is wakeup capable, driver
> configures dwc-qcom's power domain to be always ON. Also it configures
> dp/dm interrupts accordingly to support wakeup from system suspend.
> 
> More info regarding the same can be found at:
> commit d9be8d5c5b03 ("usb: dwc3: qcom: Keep power domain on to retain controller status")
> commit 6895ea55c385 ("usb: dwc3: qcom: Configure wakeup interrupts during suspend")
> 
> In the event, dwc3 probe gets deferred and is processed after dwc3-qcom
> probe, driver ends up reading the wakeup capability of dwc3 core as false
> leading to instability in suspend/resume path.
> 
> To avoid this scenario, ensure dwc3_probe is successful by checking
> if appropriate driver is assigned to it or not after the of_platform_populate
> call. If it isn't then defer dwc3-qcom probe as well.
> 
> Fixes: 649f5c842ba3 ("usb: dwc3: core: Host wake up support from system suspend")
> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
> ---
> v2: Set return value to EPROBE_DEFER to drop reference to dwc3 node
> 
>  drivers/usb/dwc3/dwc3-qcom.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
> index 7703655..6676b39 100644
> --- a/drivers/usb/dwc3/dwc3-qcom.c
> +++ b/drivers/usb/dwc3/dwc3-qcom.c
> @@ -722,6 +722,9 @@ static int dwc3_qcom_of_register_core(struct platform_device *pdev)
>  		dev_err(dev, "failed to get dwc3 platform device\n");
>  	}
>  
> +	if (!qcom->dwc3->dev.driver)
> +		ret = -EPROBE_DEFER;
> +
>  node_put:
>  	of_node_put(dwc3_np);

NAK.

We should not be adding hacks like this to the driver.

There are other ways to avoid this, but please take a look at the
following series which makes the problem identified by this patch go
away first:

	https://lore.kernel.org/all/20220802151404.1797-1-johan+linaro@kernel.org

Johan
diff mbox series

Patch

diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index 7703655..6676b39 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -722,6 +722,9 @@  static int dwc3_qcom_of_register_core(struct platform_device *pdev)
 		dev_err(dev, "failed to get dwc3 platform device\n");
 	}
 
+	if (!qcom->dwc3->dev.driver)
+		ret = -EPROBE_DEFER;
+
 node_put:
 	of_node_put(dwc3_np);