diff mbox series

[01/14] ACPI: video: Add a native function parameter to acpi_video_get_backlight_type()

Message ID 20220517152331.16217-2-hdegoede@redhat.com
State New
Headers show
Series [01/14] ACPI: video: Add a native function parameter to acpi_video_get_backlight_type() | expand

Commit Message

Hans de Goede May 17, 2022, 3:23 p.m. UTC
ATM on x86 laptops where we want userspace to use the acpi_video backlight
device we often register both the GPU's native backlight device and
acpi_video's firmware acpi_video# backlight device. This relies on
userspace preferring firmware type backlight devices over native ones, but
registering 2 backlight devices for a single display really is undesirable.

On x86 laptops where the native GPU backlight device should be used,
the registering of other backlight devices is avoided by their drivers
using acpi_video_get_backlight_type() and only registering their backlight
if the return value matches their type.

acpi_video_get_backlight_type() uses
backlight_device_get_by_type(BACKLIGHT_RAW) to determine if a native
driver is available and will never return native if this returns
false. This means that the GPU's native backlight registering code
cannot just call acpi_video_get_backlight_type() to determine if it
should register its backlight, since acpi_video_get_backlight_type() will
never return native until the native backlight has already registered.

To fix this add a native function parameter to
acpi_video_get_backlight_type(), which when set to true will make
acpi_video_get_backlight_type() behave as if a native backlight has
already been registered.

Note that all current callers are updated to pass false for the new
parameter, so this change in itself causes no functional changes.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/acpi/acpi_video.c                     |  2 +-
 drivers/acpi/video_detect.c                   | 20 ++++++++++++-------
 drivers/gpu/drm/i915/display/intel_opregion.c |  2 +-
 drivers/platform/x86/acer-wmi.c               |  2 +-
 drivers/platform/x86/asus-laptop.c            |  2 +-
 drivers/platform/x86/asus-wmi.c               |  4 ++--
 drivers/platform/x86/compal-laptop.c          |  2 +-
 drivers/platform/x86/dell/dell-laptop.c       |  2 +-
 drivers/platform/x86/eeepc-laptop.c           |  2 +-
 drivers/platform/x86/fujitsu-laptop.c         |  4 ++--
 drivers/platform/x86/ideapad-laptop.c         |  2 +-
 drivers/platform/x86/intel/oaktrail.c         |  2 +-
 drivers/platform/x86/msi-laptop.c             |  2 +-
 drivers/platform/x86/msi-wmi.c                |  2 +-
 drivers/platform/x86/samsung-laptop.c         |  2 +-
 drivers/platform/x86/sony-laptop.c            |  2 +-
 drivers/platform/x86/thinkpad_acpi.c          |  4 ++--
 drivers/platform/x86/toshiba_acpi.c           |  2 +-
 include/acpi/video.h                          |  6 +++---
 19 files changed, 36 insertions(+), 30 deletions(-)

Comments

Jani Nikula May 18, 2022, 8:55 a.m. UTC | #1
On Tue, 17 May 2022, Hans de Goede <hdegoede@redhat.com> wrote:
> ATM on x86 laptops where we want userspace to use the acpi_video backlight
> device we often register both the GPU's native backlight device and
> acpi_video's firmware acpi_video# backlight device. This relies on
> userspace preferring firmware type backlight devices over native ones, but
> registering 2 backlight devices for a single display really is undesirable.
>
> On x86 laptops where the native GPU backlight device should be used,
> the registering of other backlight devices is avoided by their drivers
> using acpi_video_get_backlight_type() and only registering their backlight
> if the return value matches their type.
>
> acpi_video_get_backlight_type() uses
> backlight_device_get_by_type(BACKLIGHT_RAW) to determine if a native
> driver is available and will never return native if this returns
> false. This means that the GPU's native backlight registering code
> cannot just call acpi_video_get_backlight_type() to determine if it
> should register its backlight, since acpi_video_get_backlight_type() will
> never return native until the native backlight has already registered.
>
> To fix this add a native function parameter to
> acpi_video_get_backlight_type(), which when set to true will make
> acpi_video_get_backlight_type() behave as if a native backlight has
> already been registered.
>
> Note that all current callers are updated to pass false for the new
> parameter, so this change in itself causes no functional changes.


> diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
> index becc198e4c22..0a06f0edd298 100644
> --- a/drivers/acpi/video_detect.c
> +++ b/drivers/acpi/video_detect.c
> @@ -17,12 +17,14 @@
>   * Otherwise vendor specific drivers like thinkpad_acpi, asus-laptop,
>   * sony_acpi,... can take care about backlight brightness.
>   *
> - * Backlight drivers can use acpi_video_get_backlight_type() to determine
> - * which driver should handle the backlight.
> + * Backlight drivers can use acpi_video_get_backlight_type() to determine which
> + * driver should handle the backlight. RAW/GPU-driver backlight drivers must
> + * pass true for the native function argument, other drivers must pass false.
>   *
>   * If CONFIG_ACPI_VIDEO is neither set as "compiled in" (y) nor as a module (m)
>   * this file will not be compiled and acpi_video_get_backlight_type() will
> - * always return acpi_backlight_vendor.
> + * return acpi_backlight_native when its native argument is true and
> + * acpi_backlight_vendor when it is false.
>   */

Frankly, I think the boolean native parameter here, and at the call
sites, is confusing, and the slightly different explanations in the
commit message and comment here aren't helping.

I suggest adding a separate function that the native backlight drivers
should use. I think it's more obvious all around, and easier to document
too.


BR,
Jani.
Hans de Goede May 18, 2022, 10:06 a.m. UTC | #2
Hi,

On 5/18/22 10:55, Jani Nikula wrote:
> On Tue, 17 May 2022, Hans de Goede <hdegoede@redhat.com> wrote:
>> ATM on x86 laptops where we want userspace to use the acpi_video backlight
>> device we often register both the GPU's native backlight device and
>> acpi_video's firmware acpi_video# backlight device. This relies on
>> userspace preferring firmware type backlight devices over native ones, but
>> registering 2 backlight devices for a single display really is undesirable.
>>
>> On x86 laptops where the native GPU backlight device should be used,
>> the registering of other backlight devices is avoided by their drivers
>> using acpi_video_get_backlight_type() and only registering their backlight
>> if the return value matches their type.
>>
>> acpi_video_get_backlight_type() uses
>> backlight_device_get_by_type(BACKLIGHT_RAW) to determine if a native
>> driver is available and will never return native if this returns
>> false. This means that the GPU's native backlight registering code
>> cannot just call acpi_video_get_backlight_type() to determine if it
>> should register its backlight, since acpi_video_get_backlight_type() will
>> never return native until the native backlight has already registered.
>>
>> To fix this add a native function parameter to
>> acpi_video_get_backlight_type(), which when set to true will make
>> acpi_video_get_backlight_type() behave as if a native backlight has
>> already been registered.
>>
>> Note that all current callers are updated to pass false for the new
>> parameter, so this change in itself causes no functional changes.
> 
> 
>> diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
>> index becc198e4c22..0a06f0edd298 100644
>> --- a/drivers/acpi/video_detect.c
>> +++ b/drivers/acpi/video_detect.c
>> @@ -17,12 +17,14 @@
>>   * Otherwise vendor specific drivers like thinkpad_acpi, asus-laptop,
>>   * sony_acpi,... can take care about backlight brightness.
>>   *
>> - * Backlight drivers can use acpi_video_get_backlight_type() to determine
>> - * which driver should handle the backlight.
>> + * Backlight drivers can use acpi_video_get_backlight_type() to determine which
>> + * driver should handle the backlight. RAW/GPU-driver backlight drivers must
>> + * pass true for the native function argument, other drivers must pass false.
>>   *
>>   * If CONFIG_ACPI_VIDEO is neither set as "compiled in" (y) nor as a module (m)
>>   * this file will not be compiled and acpi_video_get_backlight_type() will
>> - * always return acpi_backlight_vendor.
>> + * return acpi_backlight_native when its native argument is true and
>> + * acpi_backlight_vendor when it is false.
>>   */
> 
> Frankly, I think the boolean native parameter here, and at the call
> sites, is confusing, and the slightly different explanations in the
> commit message and comment here aren't helping.

Can you elaborate the "slightly different explanations in the
commit message and comment" part a bit (so that I can fix this) ?

> I suggest adding a separate function that the native backlight drivers
> should use. I think it's more obvious all around, and easier to document
> too.

Code wise I think this would mean renaming the original and
then adding 2 wrappers, but that is fine with me. I've no real
preference either way and I'm happy with adding a new variant of
acpi_video_get_backlight_type() for the native backlight drivers
any suggestion for a name ?

Regards,

Hans
Jani Nikula May 19, 2022, 9:02 a.m. UTC | #3
On Wed, 18 May 2022, Hans de Goede <hdegoede@redhat.com> wrote:
> Hi,
>
> On 5/18/22 10:55, Jani Nikula wrote:
>> On Tue, 17 May 2022, Hans de Goede <hdegoede@redhat.com> wrote:
>>> ATM on x86 laptops where we want userspace to use the acpi_video backlight
>>> device we often register both the GPU's native backlight device and
>>> acpi_video's firmware acpi_video# backlight device. This relies on
>>> userspace preferring firmware type backlight devices over native ones, but
>>> registering 2 backlight devices for a single display really is undesirable.
>>>
>>> On x86 laptops where the native GPU backlight device should be used,
>>> the registering of other backlight devices is avoided by their drivers
>>> using acpi_video_get_backlight_type() and only registering their backlight
>>> if the return value matches their type.
>>>
>>> acpi_video_get_backlight_type() uses
>>> backlight_device_get_by_type(BACKLIGHT_RAW) to determine if a native
>>> driver is available and will never return native if this returns
>>> false. This means that the GPU's native backlight registering code
>>> cannot just call acpi_video_get_backlight_type() to determine if it
>>> should register its backlight, since acpi_video_get_backlight_type() will
>>> never return native until the native backlight has already registered.
>>>
>>> To fix this add a native function parameter to
>>> acpi_video_get_backlight_type(), which when set to true will make
>>> acpi_video_get_backlight_type() behave as if a native backlight has
>>> already been registered.

Regarding the question below, this is the part that throws me off.

>>>
>>> Note that all current callers are updated to pass false for the new
>>> parameter, so this change in itself causes no functional changes.
>> 
>> 
>>> diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
>>> index becc198e4c22..0a06f0edd298 100644
>>> --- a/drivers/acpi/video_detect.c
>>> +++ b/drivers/acpi/video_detect.c
>>> @@ -17,12 +17,14 @@
>>>   * Otherwise vendor specific drivers like thinkpad_acpi, asus-laptop,
>>>   * sony_acpi,... can take care about backlight brightness.
>>>   *
>>> - * Backlight drivers can use acpi_video_get_backlight_type() to determine
>>> - * which driver should handle the backlight.
>>> + * Backlight drivers can use acpi_video_get_backlight_type() to determine which
>>> + * driver should handle the backlight. RAW/GPU-driver backlight drivers must
>>> + * pass true for the native function argument, other drivers must pass false.
>>>   *
>>>   * If CONFIG_ACPI_VIDEO is neither set as "compiled in" (y) nor as a module (m)
>>>   * this file will not be compiled and acpi_video_get_backlight_type() will
>>> - * always return acpi_backlight_vendor.
>>> + * return acpi_backlight_native when its native argument is true and
>>> + * acpi_backlight_vendor when it is false.
>>>   */
>> 
>> Frankly, I think the boolean native parameter here, and at the call
>> sites, is confusing, and the slightly different explanations in the
>> commit message and comment here aren't helping.
>
> Can you elaborate the "slightly different explanations in the
> commit message and comment" part a bit (so that I can fix this) ?
>
>> I suggest adding a separate function that the native backlight drivers
>> should use. I think it's more obvious all around, and easier to document
>> too.
>
> Code wise I think this would mean renaming the original and
> then adding 2 wrappers, but that is fine with me. I've no real
> preference either way and I'm happy with adding a new variant of
> acpi_video_get_backlight_type() for the native backlight drivers
> any suggestion for a name ?

Alternatively, do the native backlight drivers have any need for the
actual backlight type information from acpi? They only need to be able
to ask if they should register themselves, right?

I understand this sounds like bikeshedding, but I'm trying to avoid
duplicating the conditions in the drivers where a single predicate
function call could be sufficient, and the complexity could be hidden in
acpi.

	if (!acpi_video_backlight_use_native())
		return;

Perhaps all the drivers/platform/x86/* backlight drivers could use:

	if (acpi_video_backlight_use_vendor())
		...

You can still use the native parameter etc. internally, but just hide
the details from everyone else, and, hopefully, make it harder for them
to do silly things?

BR,
Jani.


>
> Regards,
>
> Hans
>
Hans de Goede June 21, 2022, 10:06 a.m. UTC | #4
Hi,

On 5/19/22 11:02, Jani Nikula wrote:
> On Wed, 18 May 2022, Hans de Goede <hdegoede@redhat.com> wrote:
>> Hi,
>>
>> On 5/18/22 10:55, Jani Nikula wrote:
>>> On Tue, 17 May 2022, Hans de Goede <hdegoede@redhat.com> wrote:
>>>> ATM on x86 laptops where we want userspace to use the acpi_video backlight
>>>> device we often register both the GPU's native backlight device and
>>>> acpi_video's firmware acpi_video# backlight device. This relies on
>>>> userspace preferring firmware type backlight devices over native ones, but
>>>> registering 2 backlight devices for a single display really is undesirable.
>>>>
>>>> On x86 laptops where the native GPU backlight device should be used,
>>>> the registering of other backlight devices is avoided by their drivers
>>>> using acpi_video_get_backlight_type() and only registering their backlight
>>>> if the return value matches their type.
>>>>
>>>> acpi_video_get_backlight_type() uses
>>>> backlight_device_get_by_type(BACKLIGHT_RAW) to determine if a native
>>>> driver is available and will never return native if this returns
>>>> false. This means that the GPU's native backlight registering code
>>>> cannot just call acpi_video_get_backlight_type() to determine if it
>>>> should register its backlight, since acpi_video_get_backlight_type() will
>>>> never return native until the native backlight has already registered.
>>>>
>>>> To fix this add a native function parameter to
>>>> acpi_video_get_backlight_type(), which when set to true will make
>>>> acpi_video_get_backlight_type() behave as if a native backlight has
>>>> already been registered.
> 
> Regarding the question below, this is the part that throws me off.
> 
>>>>
>>>> Note that all current callers are updated to pass false for the new
>>>> parameter, so this change in itself causes no functional changes.
>>>
>>>
>>>> diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
>>>> index becc198e4c22..0a06f0edd298 100644
>>>> --- a/drivers/acpi/video_detect.c
>>>> +++ b/drivers/acpi/video_detect.c
>>>> @@ -17,12 +17,14 @@
>>>>   * Otherwise vendor specific drivers like thinkpad_acpi, asus-laptop,
>>>>   * sony_acpi,... can take care about backlight brightness.
>>>>   *
>>>> - * Backlight drivers can use acpi_video_get_backlight_type() to determine
>>>> - * which driver should handle the backlight.
>>>> + * Backlight drivers can use acpi_video_get_backlight_type() to determine which
>>>> + * driver should handle the backlight. RAW/GPU-driver backlight drivers must
>>>> + * pass true for the native function argument, other drivers must pass false.
>>>>   *
>>>>   * If CONFIG_ACPI_VIDEO is neither set as "compiled in" (y) nor as a module (m)
>>>>   * this file will not be compiled and acpi_video_get_backlight_type() will
>>>> - * always return acpi_backlight_vendor.
>>>> + * return acpi_backlight_native when its native argument is true and
>>>> + * acpi_backlight_vendor when it is false.
>>>>   */
>>>
>>> Frankly, I think the boolean native parameter here, and at the call
>>> sites, is confusing, and the slightly different explanations in the
>>> commit message and comment here aren't helping.
>>
>> Can you elaborate the "slightly different explanations in the
>> commit message and comment" part a bit (so that I can fix this) ?
>>
>>> I suggest adding a separate function that the native backlight drivers
>>> should use. I think it's more obvious all around, and easier to document
>>> too.
>>
>> Code wise I think this would mean renaming the original and
>> then adding 2 wrappers, but that is fine with me. I've no real
>> preference either way and I'm happy with adding a new variant of
>> acpi_video_get_backlight_type() for the native backlight drivers
>> any suggestion for a name ?
> 
> Alternatively, do the native backlight drivers have any need for the
> actual backlight type information from acpi? They only need to be able
> to ask if they should register themselves, right?
> 
> I understand this sounds like bikeshedding, but I'm trying to avoid
> duplicating the conditions in the drivers where a single predicate
> function call could be sufficient, and the complexity could be hidden in
> acpi.
> 
> 	if (!acpi_video_backlight_use_native())
> 		return;

acpi_video_backlight_use_native() sounds good, I like I will change
this for v2. This also removes churn in all the other
acpi_video_get_backlight_type() callers.

> Perhaps all the drivers/platform/x86/* backlight drivers could use:
> 
> 	if (acpi_video_backlight_use_vendor())
> 		...

Hmm, as part of the ractoring there also will be new apple_gmux
and nvidia_wmi_ec types. I'm not sure about adding seperate functions
for all of those vs get_type() != foo. I like get_type != foo because
it makes clear that there will also be another caller somewhere
where get_type == foo and that that one will rbe the one which
actually gets to register its backlight.

> You can still use the native parameter etc. internally, but just hide
> the details from everyone else, and, hopefully, make it harder for them
> to do silly things?

Ack.

Regards,

Hans
diff mbox series

Patch

diff --git a/drivers/acpi/acpi_video.c b/drivers/acpi/acpi_video.c
index 990ff5b0aeb8..cebef3403620 100644
--- a/drivers/acpi/acpi_video.c
+++ b/drivers/acpi/acpi_video.c
@@ -1864,7 +1864,7 @@  static int acpi_video_bus_register_backlight(struct acpi_video_bus *video)
 
 	acpi_video_run_bcl_for_osi(video);
 
-	if (acpi_video_get_backlight_type() != acpi_backlight_video)
+	if (acpi_video_get_backlight_type(false) != acpi_backlight_video)
 		return 0;
 
 	mutex_lock(&video->device_list_lock);
diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
index becc198e4c22..0a06f0edd298 100644
--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -17,12 +17,14 @@ 
  * Otherwise vendor specific drivers like thinkpad_acpi, asus-laptop,
  * sony_acpi,... can take care about backlight brightness.
  *
- * Backlight drivers can use acpi_video_get_backlight_type() to determine
- * which driver should handle the backlight.
+ * Backlight drivers can use acpi_video_get_backlight_type() to determine which
+ * driver should handle the backlight. RAW/GPU-driver backlight drivers must
+ * pass true for the native function argument, other drivers must pass false.
  *
  * If CONFIG_ACPI_VIDEO is neither set as "compiled in" (y) nor as a module (m)
  * this file will not be compiled and acpi_video_get_backlight_type() will
- * always return acpi_backlight_vendor.
+ * return acpi_backlight_native when its native argument is true and
+ * acpi_backlight_vendor when it is false.
  */
 
 #include <linux/export.h>
@@ -517,7 +519,7 @@  static const struct dmi_system_id video_detect_dmi_table[] = {
 /* This uses a workqueue to avoid various locking ordering issues */
 static void acpi_video_backlight_notify_work(struct work_struct *work)
 {
-	if (acpi_video_get_backlight_type() != acpi_backlight_video)
+	if (acpi_video_get_backlight_type(false) != acpi_backlight_video)
 		acpi_video_unregister_backlight();
 }
 
@@ -548,9 +550,10 @@  static int acpi_video_backlight_notify(struct notifier_block *nb,
  * Arguably the native on win8 check should be done first, but that would
  * be a behavior change, which may causes issues.
  */
-enum acpi_backlight_type acpi_video_get_backlight_type(void)
+enum acpi_backlight_type acpi_video_get_backlight_type(bool native)
 {
 	static DEFINE_MUTEX(init_mutex);
+	static bool native_available;
 	static bool init_done;
 	static long video_caps;
 
@@ -570,6 +573,8 @@  enum acpi_backlight_type acpi_video_get_backlight_type(void)
 			backlight_notifier_registered = true;
 		init_done = true;
 	}
+	if (native)
+		native_available = true;
 	mutex_unlock(&init_mutex);
 
 	if (acpi_backlight_cmdline != acpi_backlight_undef)
@@ -581,7 +586,8 @@  enum acpi_backlight_type acpi_video_get_backlight_type(void)
 	if (!(video_caps & ACPI_VIDEO_BACKLIGHT))
 		return acpi_backlight_vendor;
 
-	if (acpi_osi_is_win8() && backlight_device_get_by_type(BACKLIGHT_RAW))
+	if (acpi_osi_is_win8() &&
+	    (native_available || backlight_device_get_by_type(BACKLIGHT_RAW)))
 		return acpi_backlight_native;
 
 	return acpi_backlight_video;
@@ -597,7 +603,7 @@  void acpi_video_set_dmi_backlight_type(enum acpi_backlight_type type)
 {
 	acpi_backlight_dmi = type;
 	/* Remove acpi-video backlight interface if it is no longer desired */
-	if (acpi_video_get_backlight_type() != acpi_backlight_video)
+	if (acpi_video_get_backlight_type(false) != acpi_backlight_video)
 		acpi_video_unregister_backlight();
 }
 EXPORT_SYMBOL(acpi_video_set_dmi_backlight_type);
diff --git a/drivers/gpu/drm/i915/display/intel_opregion.c b/drivers/gpu/drm/i915/display/intel_opregion.c
index f31e8c3f8ce0..ed726a8af478 100644
--- a/drivers/gpu/drm/i915/display/intel_opregion.c
+++ b/drivers/gpu/drm/i915/display/intel_opregion.c
@@ -463,7 +463,7 @@  static u32 asle_set_backlight(struct drm_i915_private *dev_priv, u32 bclp)
 
 	drm_dbg(&dev_priv->drm, "bclp = 0x%08x\n", bclp);
 
-	if (acpi_video_get_backlight_type() == acpi_backlight_native) {
+	if (acpi_video_get_backlight_type(false) == acpi_backlight_native) {
 		drm_dbg_kms(&dev_priv->drm,
 			    "opregion backlight request ignored\n");
 		return 0;
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index 9c6943e401a6..0f665106692b 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -2485,7 +2485,7 @@  static int __init acer_wmi_init(void)
 	if (dmi_check_system(video_vendor_dmi_table))
 		acpi_video_set_dmi_backlight_type(acpi_backlight_vendor);
 
-	if (acpi_video_get_backlight_type() != acpi_backlight_vendor)
+	if (acpi_video_get_backlight_type(false) != acpi_backlight_vendor)
 		interface->capability &= ~ACER_CAP_BRIGHTNESS;
 
 	if (wmi_has_guid(WMID_GUID3))
diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c
index 4d2d32bfbe2a..eb78bbf79894 100644
--- a/drivers/platform/x86/asus-laptop.c
+++ b/drivers/platform/x86/asus-laptop.c
@@ -1854,7 +1854,7 @@  static int asus_acpi_add(struct acpi_device *device)
 	if (result)
 		goto fail_platform;
 
-	if (acpi_video_get_backlight_type() == acpi_backlight_vendor) {
+	if (acpi_video_get_backlight_type(false) == acpi_backlight_vendor) {
 		result = asus_backlight_init(asus);
 		if (result)
 			goto fail_backlight;
diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
index 62ce198a3463..30171ce9ba96 100644
--- a/drivers/platform/x86/asus-wmi.c
+++ b/drivers/platform/x86/asus-wmi.c
@@ -3055,7 +3055,7 @@  static void asus_wmi_handle_event_code(int code, struct asus_wmi *asus)
 		code = ASUS_WMI_BRN_DOWN;
 
 	if (code == ASUS_WMI_BRN_DOWN || code == ASUS_WMI_BRN_UP) {
-		if (acpi_video_get_backlight_type() == acpi_backlight_vendor) {
+		if (acpi_video_get_backlight_type(false) == acpi_backlight_vendor) {
 			asus_wmi_backlight_notify(asus, orig_code);
 			return;
 		}
@@ -3625,7 +3625,7 @@  static int asus_wmi_add(struct platform_device *pdev)
 	if (asus->driver->quirks->xusb2pr)
 		asus_wmi_set_xusb2pr(asus);
 
-	if (acpi_video_get_backlight_type() == acpi_backlight_vendor) {
+	if (acpi_video_get_backlight_type(false) == acpi_backlight_vendor) {
 		err = asus_wmi_backlight_init(asus);
 		if (err && err != -ENODEV)
 			goto fail_backlight;
diff --git a/drivers/platform/x86/compal-laptop.c b/drivers/platform/x86/compal-laptop.c
index ab610376fdad..252a5f83c778 100644
--- a/drivers/platform/x86/compal-laptop.c
+++ b/drivers/platform/x86/compal-laptop.c
@@ -981,7 +981,7 @@  static int __init compal_init(void)
 		return -ENODEV;
 	}
 
-	if (acpi_video_get_backlight_type() == acpi_backlight_vendor) {
+	if (acpi_video_get_backlight_type(false) == acpi_backlight_vendor) {
 		struct backlight_properties props;
 		memset(&props, 0, sizeof(struct backlight_properties));
 		props.type = BACKLIGHT_PLATFORM;
diff --git a/drivers/platform/x86/dell/dell-laptop.c b/drivers/platform/x86/dell/dell-laptop.c
index 1321687d923e..9c19248f45dd 100644
--- a/drivers/platform/x86/dell/dell-laptop.c
+++ b/drivers/platform/x86/dell/dell-laptop.c
@@ -2230,7 +2230,7 @@  static int __init dell_init(void)
 		micmute_led_registered = true;
 	}
 
-	if (acpi_video_get_backlight_type() != acpi_backlight_vendor)
+	if (acpi_video_get_backlight_type(false) != acpi_backlight_vendor)
 		return 0;
 
 	token = dell_smbios_find_token(BRIGHTNESS_TOKEN);
diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index ba08c9235f76..f534208798f7 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -1400,7 +1400,7 @@  static int eeepc_acpi_add(struct acpi_device *device)
 	if (result)
 		goto fail_platform;
 
-	if (acpi_video_get_backlight_type() == acpi_backlight_vendor) {
+	if (acpi_video_get_backlight_type(false) == acpi_backlight_vendor) {
 		result = eeepc_backlight_init(eeepc);
 		if (result)
 			goto fail_backlight;
diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c
index 80929380ec7e..04e85404760f 100644
--- a/drivers/platform/x86/fujitsu-laptop.c
+++ b/drivers/platform/x86/fujitsu-laptop.c
@@ -387,7 +387,7 @@  static int acpi_fujitsu_bl_add(struct acpi_device *device)
 	struct fujitsu_bl *priv;
 	int ret;
 
-	if (acpi_video_get_backlight_type() != acpi_backlight_vendor)
+	if (acpi_video_get_backlight_type(false) != acpi_backlight_vendor)
 		return -ENODEV;
 
 	priv = devm_kzalloc(&device->dev, sizeof(*priv), GFP_KERNEL);
@@ -819,7 +819,7 @@  static int acpi_fujitsu_laptop_add(struct acpi_device *device)
 
 	/* Sync backlight power status */
 	if (fujitsu_bl && fujitsu_bl->bl_device &&
-	    acpi_video_get_backlight_type() == acpi_backlight_vendor) {
+	    acpi_video_get_backlight_type(false) == acpi_backlight_vendor) {
 		if (call_fext_func(fext, FUNC_BACKLIGHT, 0x2,
 				   BACKLIGHT_PARAM_POWER, 0x0) == BACKLIGHT_OFF)
 			fujitsu_bl->bl_device->props.power = FB_BLANK_POWERDOWN;
diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c
index 3ccb7b71dfb1..deb123e7f88f 100644
--- a/drivers/platform/x86/ideapad-laptop.c
+++ b/drivers/platform/x86/ideapad-laptop.c
@@ -1620,7 +1620,7 @@  static int ideapad_acpi_add(struct platform_device *pdev)
 			dev_info(&pdev->dev, "DYTC interface is not available\n");
 	}
 
-	if (acpi_video_get_backlight_type() == acpi_backlight_vendor) {
+	if (acpi_video_get_backlight_type(false) == acpi_backlight_vendor) {
 		err = ideapad_backlight_init(priv);
 		if (err && err != -ENODEV)
 			goto backlight_failed;
diff --git a/drivers/platform/x86/intel/oaktrail.c b/drivers/platform/x86/intel/oaktrail.c
index 1a09a75bd16d..631ae393e52e 100644
--- a/drivers/platform/x86/intel/oaktrail.c
+++ b/drivers/platform/x86/intel/oaktrail.c
@@ -330,7 +330,7 @@  static int __init oaktrail_init(void)
 		goto err_device_add;
 	}
 
-	if (acpi_video_get_backlight_type() == acpi_backlight_vendor) {
+	if (acpi_video_get_backlight_type(false) == acpi_backlight_vendor) {
 		ret = oaktrail_backlight_init();
 		if (ret)
 			goto err_backlight;
diff --git a/drivers/platform/x86/msi-laptop.c b/drivers/platform/x86/msi-laptop.c
index 24ffc8e2d2d1..8c8cb814ae09 100644
--- a/drivers/platform/x86/msi-laptop.c
+++ b/drivers/platform/x86/msi-laptop.c
@@ -1050,7 +1050,7 @@  static int __init msi_init(void)
 	/* Register backlight stuff */
 
 	if (quirks->old_ec_model ||
-	    acpi_video_get_backlight_type() == acpi_backlight_vendor) {
+	    acpi_video_get_backlight_type(false) == acpi_backlight_vendor) {
 		struct backlight_properties props;
 		memset(&props, 0, sizeof(struct backlight_properties));
 		props.type = BACKLIGHT_PLATFORM;
diff --git a/drivers/platform/x86/msi-wmi.c b/drivers/platform/x86/msi-wmi.c
index fd318cdfe313..3e6f291ba14e 100644
--- a/drivers/platform/x86/msi-wmi.c
+++ b/drivers/platform/x86/msi-wmi.c
@@ -309,7 +309,7 @@  static int __init msi_wmi_init(void)
 	}
 
 	if (wmi_has_guid(MSIWMI_BIOS_GUID) &&
-	    acpi_video_get_backlight_type() == acpi_backlight_vendor) {
+	    acpi_video_get_backlight_type(false) == acpi_backlight_vendor) {
 		err = msi_wmi_backlight_setup();
 		if (err) {
 			pr_err("Unable to setup backlight device\n");
diff --git a/drivers/platform/x86/samsung-laptop.c b/drivers/platform/x86/samsung-laptop.c
index c187dcdf82f0..985e6ea0fabf 100644
--- a/drivers/platform/x86/samsung-laptop.c
+++ b/drivers/platform/x86/samsung-laptop.c
@@ -1660,7 +1660,7 @@  static int __init samsung_init(void)
 	if (samsung->quirks->use_native_backlight)
 		acpi_video_set_dmi_backlight_type(acpi_backlight_native);
 
-	if (acpi_video_get_backlight_type() != acpi_backlight_vendor)
+	if (acpi_video_get_backlight_type(false) != acpi_backlight_vendor)
 		samsung->handle_backlight = false;
 #endif
 
diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c
index d8d0c0bed5e9..ebd7738c2c44 100644
--- a/drivers/platform/x86/sony-laptop.c
+++ b/drivers/platform/x86/sony-laptop.c
@@ -3201,7 +3201,7 @@  static int sony_nc_add(struct acpi_device *device)
 			sony_nc_function_setup(device, sony_pf_device);
 	}
 
-	if (acpi_video_get_backlight_type() == acpi_backlight_vendor)
+	if (acpi_video_get_backlight_type(false) == acpi_backlight_vendor)
 		sony_nc_backlight_setup();
 
 	/* create sony_pf sysfs attributes related to the SNC device */
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index e6cb4a14cdd4..411679d86308 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -3547,7 +3547,7 @@  static int __init hotkey_init(struct ibm_init_struct *iibm)
 	/* Do not issue duplicate brightness change events to
 	 * userspace. tpacpi_detect_brightness_capabilities() must have
 	 * been called before this point  */
-	if (acpi_video_get_backlight_type() != acpi_backlight_vendor) {
+	if (acpi_video_get_backlight_type(false) != acpi_backlight_vendor) {
 		pr_info("This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver\n");
 		pr_notice("Disabling thinkpad-acpi brightness events by default...\n");
 
@@ -6989,7 +6989,7 @@  static int __init brightness_init(struct ibm_init_struct *iibm)
 		return -ENODEV;
 	}
 
-	if (acpi_video_get_backlight_type() != acpi_backlight_vendor) {
+	if (acpi_video_get_backlight_type(false) != acpi_backlight_vendor) {
 		if (brightness_enable > 1) {
 			pr_info("Standard ACPI backlight interface available, not loading native one\n");
 			return -ENODEV;
diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index 0fc9e8b8827b..3ea6a1286f0c 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -2889,7 +2889,7 @@  static int toshiba_acpi_setup_backlight(struct toshiba_acpi_dev *dev)
 	    dmi_check_system(toshiba_vendor_backlight_dmi))
 		acpi_video_set_dmi_backlight_type(acpi_backlight_vendor);
 
-	if (acpi_video_get_backlight_type() != acpi_backlight_vendor)
+	if (acpi_video_get_backlight_type(false) != acpi_backlight_vendor)
 		return 0;
 
 	memset(&props, 0, sizeof(props));
diff --git a/include/acpi/video.h b/include/acpi/video.h
index db8548ff03ce..e31afb93379a 100644
--- a/include/acpi/video.h
+++ b/include/acpi/video.h
@@ -55,7 +55,7 @@  extern int acpi_video_register(void);
 extern void acpi_video_unregister(void);
 extern int acpi_video_get_edid(struct acpi_device *device, int type,
 			       int device_id, void **edid);
-extern enum acpi_backlight_type acpi_video_get_backlight_type(void);
+extern enum acpi_backlight_type acpi_video_get_backlight_type(bool native);
 extern void acpi_video_set_dmi_backlight_type(enum acpi_backlight_type type);
 /*
  * Note: The value returned by acpi_video_handles_brightness_key_presses()
@@ -73,9 +73,9 @@  static inline int acpi_video_get_edid(struct acpi_device *device, int type,
 {
 	return -ENODEV;
 }
-static inline enum acpi_backlight_type acpi_video_get_backlight_type(void)
+static inline enum acpi_backlight_type acpi_video_get_backlight_type(bool native)
 {
-	return acpi_backlight_vendor;
+	return native ? acpi_backlight_native : acpi_backlight_vendor;
 }
 static inline void acpi_video_set_dmi_backlight_type(enum acpi_backlight_type type)
 {