| Message ID | 20220620105405.145959-5-alain.volmat@foss.st.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | i2c: stm32: addition of STM32MP13 support | expand |
Hi All Look good to me. Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com> Regards On 6/20/22 12:54, Alain Volmat wrote: > Add a new compatible for the stm32mp13. Fast Mode Plus control > register address differ from the one for STM32MP15. > > Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> > --- > drivers/i2c/busses/i2c-stm32f7.c | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c > index b29d8e476342..9946b330ddce 100644 > --- a/drivers/i2c/busses/i2c-stm32f7.c > +++ b/drivers/i2c/busses/i2c-stm32f7.c > @@ -410,6 +410,12 @@ static const struct stm32f7_i2c_setup stm32mp15_setup = { > .fmp_clr_offset = 0x40, > }; > > +static const struct stm32f7_i2c_setup stm32mp13_setup = { > + .rise_time = STM32F7_I2C_RISE_TIME_DEFAULT, > + .fall_time = STM32F7_I2C_FALL_TIME_DEFAULT, > + .fmp_clr_offset = 0x4, > +}; > + > static inline void stm32f7_i2c_set_bits(void __iomem *reg, u32 mask) > { > writel_relaxed(readl_relaxed(reg) | mask, reg); > @@ -2469,6 +2475,7 @@ static const struct dev_pm_ops stm32f7_i2c_pm_ops = { > static const struct of_device_id stm32f7_i2c_match[] = { > { .compatible = "st,stm32f7-i2c", .data = &stm32f7_setup}, > { .compatible = "st,stm32mp15-i2c", .data = &stm32mp15_setup}, > + { .compatible = "st,stm32mp13-i2c", .data = &stm32mp13_setup}, > {}, > }; > MODULE_DEVICE_TABLE(of, stm32f7_i2c_match);
diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c index b29d8e476342..9946b330ddce 100644 --- a/drivers/i2c/busses/i2c-stm32f7.c +++ b/drivers/i2c/busses/i2c-stm32f7.c @@ -410,6 +410,12 @@ static const struct stm32f7_i2c_setup stm32mp15_setup = { .fmp_clr_offset = 0x40, }; +static const struct stm32f7_i2c_setup stm32mp13_setup = { + .rise_time = STM32F7_I2C_RISE_TIME_DEFAULT, + .fall_time = STM32F7_I2C_FALL_TIME_DEFAULT, + .fmp_clr_offset = 0x4, +}; + static inline void stm32f7_i2c_set_bits(void __iomem *reg, u32 mask) { writel_relaxed(readl_relaxed(reg) | mask, reg); @@ -2469,6 +2475,7 @@ static const struct dev_pm_ops stm32f7_i2c_pm_ops = { static const struct of_device_id stm32f7_i2c_match[] = { { .compatible = "st,stm32f7-i2c", .data = &stm32f7_setup}, { .compatible = "st,stm32mp15-i2c", .data = &stm32mp15_setup}, + { .compatible = "st,stm32mp13-i2c", .data = &stm32mp13_setup}, {}, }; MODULE_DEVICE_TABLE(of, stm32f7_i2c_match);
Add a new compatible for the stm32mp13. Fast Mode Plus control register address differ from the one for STM32MP15. Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> --- drivers/i2c/busses/i2c-stm32f7.c | 7 +++++++ 1 file changed, 7 insertions(+)