| Message ID | 20220610200500.6727-1-wsa+renesas@sang-engineering.com |
|---|---|
| State | Accepted |
| Commit | 404dd7dfb13028d315514f63ed3cf9da46307a39 |
| Headers | show |
| Series | [v3] thermal: rcar_gen3_thermal: improve logging during probe | expand |
On Fri, Jun 10, 2022 at 10:08 PM Wolfram Sang <wsa+renesas@sang-engineering.com> wrote: > When setting up a new board, a plain "Can't register thermal zone" > didn't help me much because the thermal zones in DT were all fine. I > just had a sensor entry too much in the parent TSC node. Reword the > failure/success messages to contain the sensor number to make it easier > to understand which sensor is affected. Example output now: > > rcar_gen3_thermal e6198000.thermal: Sensor 0: Loaded 1 trip points > rcar_gen3_thermal e6198000.thermal: Sensor 1: Loaded 1 trip points > rcar_gen3_thermal e6198000.thermal: Sensor 2: Loaded 1 trip points > rcar_gen3_thermal e6198000.thermal: Sensor 3: Can't register thermal zone > > Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> > --- > > Change since v2: > > * don't add plural-'s' at runtime to allow for a greppable string > (Thanks, Niklas!) Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
diff --git a/drivers/thermal/rcar_gen3_thermal.c b/drivers/thermal/rcar_gen3_thermal.c index ccdf8a24ddc7..cda7c52f2319 100644 --- a/drivers/thermal/rcar_gen3_thermal.c +++ b/drivers/thermal/rcar_gen3_thermal.c @@ -511,7 +511,7 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev) zone = devm_thermal_zone_of_sensor_register(dev, i, tsc, &rcar_gen3_tz_of_ops); if (IS_ERR(zone)) { - dev_err(dev, "Can't register thermal zone\n"); + dev_err(dev, "Sensor %u: Can't register thermal zone\n", i); ret = PTR_ERR(zone); goto error_unregister; } @@ -533,7 +533,7 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev) if (ret < 0) goto error_unregister; - dev_info(dev, "TSC%u: Loaded %d trip points\n", i, ret); + dev_info(dev, "Sensor %u: Loaded %d trip points\n", i, ret); } if (!priv->num_tscs) {
When setting up a new board, a plain "Can't register thermal zone" didn't help me much because the thermal zones in DT were all fine. I just had a sensor entry too much in the parent TSC node. Reword the failure/success messages to contain the sensor number to make it easier to understand which sensor is affected. Example output now: rcar_gen3_thermal e6198000.thermal: Sensor 0: Loaded 1 trip points rcar_gen3_thermal e6198000.thermal: Sensor 1: Loaded 1 trip points rcar_gen3_thermal e6198000.thermal: Sensor 2: Loaded 1 trip points rcar_gen3_thermal e6198000.thermal: Sensor 3: Can't register thermal zone Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> --- Change since v2: * don't add plural-'s' at runtime to allow for a greppable string (Thanks, Niklas!) drivers/thermal/rcar_gen3_thermal.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)