| Message ID | 20220603135714.12007-6-aidanmacdonald.0x0@gmail.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add support for AXP192 PMIC | expand |
On Fri, Jun 03, 2022 at 02:57:09PM +0100, Aidan MacDonald wrote: > The AXP192 PMIC is different enough from the PMICs supported by > the AXP20x GPIO driver to warrant a separate driver. The AXP192 > driver also supports interrupts and pinconf settings. > > Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> > --- > .../bindings/gpio/x-powers,axp192-gpio.yaml | 59 +++++++++++++++++++ > 1 file changed, 59 insertions(+) > create mode 100644 Documentation/devicetree/bindings/gpio/x-powers,axp192-gpio.yaml > > diff --git a/Documentation/devicetree/bindings/gpio/x-powers,axp192-gpio.yaml b/Documentation/devicetree/bindings/gpio/x-powers,axp192-gpio.yaml > new file mode 100644 > index 000000000000..7a985640ade8 > --- /dev/null > +++ b/Documentation/devicetree/bindings/gpio/x-powers,axp192-gpio.yaml > @@ -0,0 +1,59 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: "http://devicetree.org/schemas/gpio/x-powers,axp192-gpio.yaml#" > +$schema: "http://devicetree.org/meta-schemas/core.yaml#" > + > +title: X-Powers AXP192 GPIO Device Tree Bindings > + > +maintainers: > + - Chen-Yu Tsai <wens@csie.org> > + > +properties: > + "#gpio-cells": > + const: 2 > + description: > > + The first cell is the pin number and the second is the GPIO flags. > + > + compatible: > + oneOf: > + - enum: No need for 'oneOf' with only 1 entry. > + - x-powers,axp192-gpio > + > + gpio-controller: true > + > +patternProperties: > + "^.*-pins?$": You can omit '^.*' Why does 's' need to be optional? > + $ref: /schemas/pinctrl/pinmux-node.yaml# > + > + properties: > + pins: > + items: > + enum: > + - GPIO0 > + - GPIO1 > + - GPIO2 > + - GPIO3 > + - GPIO4 > + - N_RSTO > + > + function: > + enum: > + - output > + - input > + - ldo > + - pwm > + - adc > + - low_output > + - floating > + - ext_chg_ctl > + - ldo_status > + > +required: > + - compatible > + - "#gpio-cells" > + - gpio-controller > + > +additionalProperties: false > + > +... > -- > 2.35.1 > >
Rob Herring <robh@kernel.org> writes: > On Fri, Jun 03, 2022 at 02:57:09PM +0100, Aidan MacDonald wrote: >> The AXP192 PMIC is different enough from the PMICs supported by >> the AXP20x GPIO driver to warrant a separate driver. The AXP192 >> driver also supports interrupts and pinconf settings. >> >> Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> >> --- >> .../bindings/gpio/x-powers,axp192-gpio.yaml | 59 +++++++++++++++++++ >> 1 file changed, 59 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/gpio/x-powers,axp192-gpio.yaml >> >> diff --git a/Documentation/devicetree/bindings/gpio/x-powers,axp192-gpio.yaml b/Documentation/devicetree/bindings/gpio/x-powers,axp192-gpio.yaml >> new file mode 100644 >> index 000000000000..7a985640ade8 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/gpio/x-powers,axp192-gpio.yaml >> @@ -0,0 +1,59 @@ >> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause >> +%YAML 1.2 >> +--- >> +$id: "http://devicetree.org/schemas/gpio/x-powers,axp192-gpio.yaml#" >> +$schema: "http://devicetree.org/meta-schemas/core.yaml#" >> + >> +title: X-Powers AXP192 GPIO Device Tree Bindings >> + >> +maintainers: >> + - Chen-Yu Tsai <wens@csie.org> >> + >> +properties: >> + "#gpio-cells": >> + const: 2 >> + description: > >> + The first cell is the pin number and the second is the GPIO flags. >> + >> + compatible: >> + oneOf: >> + - enum: > > No need for 'oneOf' with only 1 entry. > Got it. >> + - x-powers,axp192-gpio >> + >> + gpio-controller: true >> + >> +patternProperties: >> + "^.*-pins?$": > > You can omit '^.*' > > Why does 's' need to be optional? > TBH I just copied this from x-powers,axp209-gpio.yaml. A similar pattern is used in a few other bindings, eg. allwinner,sun4i-a10-pinctrl.yaml. I guess it's to allow the node names to sound more natural when there's only one pin. I am going to send a v2 with '-pins?$' but if you would prefer to have '-pins$' that's fine. I don't mind either way. Regards, Aidan >> + $ref: /schemas/pinctrl/pinmux-node.yaml# >> + >> + properties: >> + pins: >> + items: >> + enum: >> + - GPIO0 >> + - GPIO1 >> + - GPIO2 >> + - GPIO3 >> + - GPIO4 >> + - N_RSTO >> + >> + function: >> + enum: >> + - output >> + - input >> + - ldo >> + - pwm >> + - adc >> + - low_output >> + - floating >> + - ext_chg_ctl >> + - ldo_status >> + >> +required: >> + - compatible >> + - "#gpio-cells" >> + - gpio-controller >> + >> +additionalProperties: false >> + >> +... >> -- >> 2.35.1 >> >>
On Tue, Jun 07, 2022 at 11:34:19AM +0100, Aidan MacDonald wrote: > > Rob Herring <robh@kernel.org> writes: > > > On Fri, Jun 03, 2022 at 02:57:09PM +0100, Aidan MacDonald wrote: > >> The AXP192 PMIC is different enough from the PMICs supported by > >> the AXP20x GPIO driver to warrant a separate driver. The AXP192 > >> driver also supports interrupts and pinconf settings. > >> > >> Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> > >> --- > >> .../bindings/gpio/x-powers,axp192-gpio.yaml | 59 +++++++++++++++++++ > >> 1 file changed, 59 insertions(+) > >> create mode 100644 Documentation/devicetree/bindings/gpio/x-powers,axp192-gpio.yaml > >> > >> diff --git a/Documentation/devicetree/bindings/gpio/x-powers,axp192-gpio.yaml b/Documentation/devicetree/bindings/gpio/x-powers,axp192-gpio.yaml > >> new file mode 100644 > >> index 000000000000..7a985640ade8 > >> --- /dev/null > >> +++ b/Documentation/devicetree/bindings/gpio/x-powers,axp192-gpio.yaml > >> @@ -0,0 +1,59 @@ > >> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > >> +%YAML 1.2 > >> +--- > >> +$id: "http://devicetree.org/schemas/gpio/x-powers,axp192-gpio.yaml#" > >> +$schema: "http://devicetree.org/meta-schemas/core.yaml#" > >> + > >> +title: X-Powers AXP192 GPIO Device Tree Bindings > >> + > >> +maintainers: > >> + - Chen-Yu Tsai <wens@csie.org> > >> + > >> +properties: > >> + "#gpio-cells": > >> + const: 2 > >> + description: > > >> + The first cell is the pin number and the second is the GPIO flags. > >> + > >> + compatible: > >> + oneOf: > >> + - enum: > > > > No need for 'oneOf' with only 1 entry. > > > > Got it. > > >> + - x-powers,axp192-gpio > >> + > >> + gpio-controller: true > >> + > >> +patternProperties: > >> + "^.*-pins?$": > > > > You can omit '^.*' > > > > Why does 's' need to be optional? > > > > TBH I just copied this from x-powers,axp209-gpio.yaml. A similar pattern > is used in a few other bindings, eg. allwinner,sun4i-a10-pinctrl.yaml. > I guess it's to allow the node names to sound more natural when there's > only one pin. Those cases were for compatibility with existing users. That shouldn't be the case here. Rob
Rob Herring <robh@kernel.org> writes: > On Tue, Jun 07, 2022 at 11:34:19AM +0100, Aidan MacDonald wrote: >> >> Rob Herring <robh@kernel.org> writes: >> >> > On Fri, Jun 03, 2022 at 02:57:09PM +0100, Aidan MacDonald wrote: >> >> The AXP192 PMIC is different enough from the PMICs supported by >> >> the AXP20x GPIO driver to warrant a separate driver. The AXP192 >> >> driver also supports interrupts and pinconf settings. >> >> >> >> Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> >> >> --- >> >> .../bindings/gpio/x-powers,axp192-gpio.yaml | 59 +++++++++++++++++++ >> >> 1 file changed, 59 insertions(+) >> >> create mode 100644 Documentation/devicetree/bindings/gpio/x-powers,axp192-gpio.yaml >> >> >> >> diff --git >> >> a/Documentation/devicetree/bindings/gpio/x-powers,axp192-gpio.yaml >> >> b/Documentation/devicetree/bindings/gpio/x-powers,axp192-gpio.yaml >> >> new file mode 100644 >> >> index 000000000000..7a985640ade8 >> >> --- /dev/null >> >> +++ b/Documentation/devicetree/bindings/gpio/x-powers,axp192-gpio.yaml >> >> @@ -0,0 +1,59 @@ >> >> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause >> >> +%YAML 1.2 >> >> +--- >> >> +$id: "http://devicetree.org/schemas/gpio/x-powers,axp192-gpio.yaml#" >> >> +$schema: "http://devicetree.org/meta-schemas/core.yaml#" >> >> + >> >> +title: X-Powers AXP192 GPIO Device Tree Bindings >> >> + >> >> +maintainers: >> >> + - Chen-Yu Tsai <wens@csie.org> >> >> + >> >> +properties: >> >> + "#gpio-cells": >> >> + const: 2 >> >> + description: > >> >> + The first cell is the pin number and the second is the GPIO flags. >> >> + >> >> + compatible: >> >> + oneOf: >> >> + - enum: >> > >> > No need for 'oneOf' with only 1 entry. >> > >> >> Got it. >> >> >> + - x-powers,axp192-gpio >> >> + >> >> + gpio-controller: true >> >> + >> >> +patternProperties: >> >> + "^.*-pins?$": >> > >> > You can omit '^.*' >> > >> > Why does 's' need to be optional? >> > >> >> TBH I just copied this from x-powers,axp209-gpio.yaml. A similar pattern >> is used in a few other bindings, eg. allwinner,sun4i-a10-pinctrl.yaml. >> I guess it's to allow the node names to sound more natural when there's >> only one pin. > > Those cases were for compatibility with existing users. That shouldn't > be the case here. > > Rob OK, thanks for the clarification. I will use '-pins$' then.
diff --git a/Documentation/devicetree/bindings/gpio/x-powers,axp192-gpio.yaml b/Documentation/devicetree/bindings/gpio/x-powers,axp192-gpio.yaml new file mode 100644 index 000000000000..7a985640ade8 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/x-powers,axp192-gpio.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/gpio/x-powers,axp192-gpio.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: X-Powers AXP192 GPIO Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + +properties: + "#gpio-cells": + const: 2 + description: > + The first cell is the pin number and the second is the GPIO flags. + + compatible: + oneOf: + - enum: + - x-powers,axp192-gpio + + gpio-controller: true + +patternProperties: + "^.*-pins?$": + $ref: /schemas/pinctrl/pinmux-node.yaml# + + properties: + pins: + items: + enum: + - GPIO0 + - GPIO1 + - GPIO2 + - GPIO3 + - GPIO4 + - N_RSTO + + function: + enum: + - output + - input + - ldo + - pwm + - adc + - low_output + - floating + - ext_chg_ctl + - ldo_status + +required: + - compatible + - "#gpio-cells" + - gpio-controller + +additionalProperties: false + +...
The AXP192 PMIC is different enough from the PMICs supported by the AXP20x GPIO driver to warrant a separate driver. The AXP192 driver also supports interrupts and pinconf settings. Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> --- .../bindings/gpio/x-powers,axp192-gpio.yaml | 59 +++++++++++++++++++ 1 file changed, 59 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/x-powers,axp192-gpio.yaml