| Message ID | 20220217184254.4141705-1-mka@chromium.org |
|---|---|
| Headers | show |
| Series | usb: misc: Add onboard_usb_hub driver | expand |
Hi, On Thu, Feb 17, 2022 at 10:43 AM Matthias Kaehlcke <mka@chromium.org> wrote: > > This series adds: > - the onboard_usb_hub_driver > - glue in the generic HCD code to create and destroy the > onboard_usb_hub platform devices if needed > - device tree changes that add RTS5411 entries for the QCA SC7180 > based boards trogdor and lazor > - a couple of stubs for platform device functions to avoid > unresolved symbols with certain kernel configs > > The main issue the driver addresses is that a USB hub needs to be > powered before it can be discovered. For discrete onboard hubs (an > example for such a hub is the Realtek RTS5411) this is often solved > by supplying the hub with an 'always-on' regulator, which is kind > of a hack. Some onboard hubs may require further initialization > steps, like changing the state of a GPIO or enabling a clock, which > requires even more hacks. This driver creates a platform device > representing the hub which performs the necessary initialization. > Currently it only supports switching on a single regulator, support > for multiple regulators or other actions can be added as needed. > Different initialization sequences can be supported based on the > compatible string. > > Besides performing the initialization the driver can be configured > to power the hub off during system suspend. This can help to extend > battery life on battery powered devices which have no requirements > to keep the hub powered during suspend. The driver can also be > configured to leave the hub powered when a wakeup capable USB device > is connected when suspending, and power it off otherwise. > > Changes in v21: > - dropped patch 'driver core: Export device_is_bound()' > - refactored _find_onboard_hub() > - removed 'onboard_hub_dev' symlinks from USB devices > - dropped patch 'arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub' > (will be sent separately) > - rebased series on v5.17-rc4 > > Changes in v20: > - addressed review comments from Stephen > - changed DT node names for hubs > > Changes in v19: > - added VID:PID pairs and compatible strings for RTS5414 hub > - updated comments with RTS5411 USB versions to reflect those > reported/supported by the hub > - rebased series on v5.16 > > Changes in v18: > - introduced hidden Kconfig option to align module vs. builtin > choice with CONFIG_USB (thanks Doug!) > - added patch 'driver core: Export device_is_bound()' > - also adjust device tree of pompom rev1 > - dropped the following patches, which aren't needed anymore by this > series (though they might still be useful on their own): > - usb: Specify dependencies on USB_XHCI_PLATFORM with 'depends on' > - arm64: defconfig: Explicitly enable USB_XHCI_PLATFORM > - ARM: configs: Explicitly enable USB_XHCI_PLATFORM where needed > > Changes in v17: > - rebased on top of v5.16-rc1 > - moved creation of onboard_hub platform devices from xhci_platform > to the generic HCD code > - addressed review comments for the onboard_hub driver > - moved Kconfig/defconfig changes to the end of the series. The > onboard_hub driver doesn't depend on XHCI_PLATFORM anymore, > hence these changes aren't really required for the driver, but > they still seem to be a worthwhile improvement > > Changes in v16: > - added patch 'ARM: configs: Explicitly enable USB_XHCI_PLATFORM > where needed' to keep arm32 defconfigs effectively unchanged > > Changes in v15: > - adjusted dependencies of USB_DWC3_CORE to make sure it can only > be enabled when at least one of USB_DWC3_HOST, USB_DWC3_GADGET > or USB_DWC3_DUAL_ROLE is selectable > > Changes in v14: > - rebased on top of v5.14-rc1 > - dropped DT binding patch which landed in v5.13 > > Changes in v13: > - added patch "usb: Specify dependency on USB_XHCI_PLATFORM with > 'depends on'" to the series to avoid Kconfig conflicts > - added patch "arm64: defconfig: Explicitly enable USB_XHCI_PLATFORM" > to the series to keep effective defconfig unchanged > > Changes in v12: > - onboard_hub driver: use IS_ENABLED(CONFIG_USB_ONBOARD_HUB_MODULE) > in onboard_hub.h to also check for the driver built as module > - onboard_hub_driver: include onboard_hub.h again to make sure there > are prototype declarations for the public functions > > Changes in v11: > - support multiple onboard hubs connected to the same parent > - don't include ‘onboard_hub.h’ from the onboard hub driver > > Changes in v10: > - always use of_is_onboard_usb_hub() stub unless ONBOARD_USB_HUB=y/m > - keep 'regulator-boot-on' property for pp3300_hub > > Changes in v9: > - added dependency on ONBOARD_USB_HUB (or !ONBOARD_USB_HUB) to > USB_PLATFORM_XHCI > > Changes in v7: > - updated DT binding > - series rebased on qcom/arm64-for-5.13 > > Changes in v6: > - updated summary > > Changes in v5: > - cover letter added > > Matthias Kaehlcke (3): > of/platform: Add stubs for of_platform_device_create/destroy() > usb: misc: Add onboard_usb_hub driver > usb: core: hcd: Create platform devices for onboard hubs in probe() > > .../sysfs-bus-platform-onboard-usb-hub | 8 + > MAINTAINERS | 7 + > drivers/usb/core/hcd.c | 6 + > drivers/usb/misc/Kconfig | 23 + > drivers/usb/misc/Makefile | 1 + > drivers/usb/misc/onboard_usb_hub.c | 510 ++++++++++++++++++ > include/linux/of_platform.h | 22 +- > include/linux/usb/hcd.h | 1 + > include/linux/usb/onboard_hub.h | 18 + > 9 files changed, 592 insertions(+), 4 deletions(-) > create mode 100644 Documentation/ABI/testing/sysfs-bus-platform-onboard-usb-hub > create mode 100644 drivers/usb/misc/onboard_usb_hub.c > create mode 100644 include/linux/usb/onboard_hub.h With v5.18-rc1 out the door, I wonder if it's a good time to look at this series again. Are there any hidden blockers that it's waiting for? -Doug
Hi, On Thu, Apr 07, 2022 at 12:41:22PM -0700, Doug Anderson wrote: > Hi, > > On Thu, Feb 17, 2022 at 10:43 AM Matthias Kaehlcke <mka@chromium.org> wrote: > > > > This series adds: > > - the onboard_usb_hub_driver > > - glue in the generic HCD code to create and destroy the > > onboard_usb_hub platform devices if needed > > - device tree changes that add RTS5411 entries for the QCA SC7180 > > based boards trogdor and lazor > > - a couple of stubs for platform device functions to avoid > > unresolved symbols with certain kernel configs > > > > The main issue the driver addresses is that a USB hub needs to be > > powered before it can be discovered. For discrete onboard hubs (an > > example for such a hub is the Realtek RTS5411) this is often solved > > by supplying the hub with an 'always-on' regulator, which is kind > > of a hack. Some onboard hubs may require further initialization > > steps, like changing the state of a GPIO or enabling a clock, which > > requires even more hacks. This driver creates a platform device > > representing the hub which performs the necessary initialization. > > Currently it only supports switching on a single regulator, support > > for multiple regulators or other actions can be added as needed. > > Different initialization sequences can be supported based on the > > compatible string. > > > > Besides performing the initialization the driver can be configured > > to power the hub off during system suspend. This can help to extend > > battery life on battery powered devices which have no requirements > > to keep the hub powered during suspend. The driver can also be > > configured to leave the hub powered when a wakeup capable USB device > > is connected when suspending, and power it off otherwise. > > > > Changes in v21: > > - dropped patch 'driver core: Export device_is_bound()' > > - refactored _find_onboard_hub() > > - removed 'onboard_hub_dev' symlinks from USB devices > > - dropped patch 'arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub' > > (will be sent separately) > > - rebased series on v5.17-rc4 > > > > Changes in v20: > > - addressed review comments from Stephen > > - changed DT node names for hubs > > > > Changes in v19: > > - added VID:PID pairs and compatible strings for RTS5414 hub > > - updated comments with RTS5411 USB versions to reflect those > > reported/supported by the hub > > - rebased series on v5.16 > > > > Changes in v18: > > - introduced hidden Kconfig option to align module vs. builtin > > choice with CONFIG_USB (thanks Doug!) > > - added patch 'driver core: Export device_is_bound()' > > - also adjust device tree of pompom rev1 > > - dropped the following patches, which aren't needed anymore by this > > series (though they might still be useful on their own): > > - usb: Specify dependencies on USB_XHCI_PLATFORM with 'depends on' > > - arm64: defconfig: Explicitly enable USB_XHCI_PLATFORM > > - ARM: configs: Explicitly enable USB_XHCI_PLATFORM where needed > > > > Changes in v17: > > - rebased on top of v5.16-rc1 > > - moved creation of onboard_hub platform devices from xhci_platform > > to the generic HCD code > > - addressed review comments for the onboard_hub driver > > - moved Kconfig/defconfig changes to the end of the series. The > > onboard_hub driver doesn't depend on XHCI_PLATFORM anymore, > > hence these changes aren't really required for the driver, but > > they still seem to be a worthwhile improvement > > > > Changes in v16: > > - added patch 'ARM: configs: Explicitly enable USB_XHCI_PLATFORM > > where needed' to keep arm32 defconfigs effectively unchanged > > > > Changes in v15: > > - adjusted dependencies of USB_DWC3_CORE to make sure it can only > > be enabled when at least one of USB_DWC3_HOST, USB_DWC3_GADGET > > or USB_DWC3_DUAL_ROLE is selectable > > > > Changes in v14: > > - rebased on top of v5.14-rc1 > > - dropped DT binding patch which landed in v5.13 > > > > Changes in v13: > > - added patch "usb: Specify dependency on USB_XHCI_PLATFORM with > > 'depends on'" to the series to avoid Kconfig conflicts > > - added patch "arm64: defconfig: Explicitly enable USB_XHCI_PLATFORM" > > to the series to keep effective defconfig unchanged > > > > Changes in v12: > > - onboard_hub driver: use IS_ENABLED(CONFIG_USB_ONBOARD_HUB_MODULE) > > in onboard_hub.h to also check for the driver built as module > > - onboard_hub_driver: include onboard_hub.h again to make sure there > > are prototype declarations for the public functions > > > > Changes in v11: > > - support multiple onboard hubs connected to the same parent > > - don't include ‘onboard_hub.h’ from the onboard hub driver > > > > Changes in v10: > > - always use of_is_onboard_usb_hub() stub unless ONBOARD_USB_HUB=y/m > > - keep 'regulator-boot-on' property for pp3300_hub > > > > Changes in v9: > > - added dependency on ONBOARD_USB_HUB (or !ONBOARD_USB_HUB) to > > USB_PLATFORM_XHCI > > > > Changes in v7: > > - updated DT binding > > - series rebased on qcom/arm64-for-5.13 > > > > Changes in v6: > > - updated summary > > > > Changes in v5: > > - cover letter added > > > > Matthias Kaehlcke (3): > > of/platform: Add stubs for of_platform_device_create/destroy() > > usb: misc: Add onboard_usb_hub driver > > usb: core: hcd: Create platform devices for onboard hubs in probe() > > > > .../sysfs-bus-platform-onboard-usb-hub | 8 + > > MAINTAINERS | 7 + > > drivers/usb/core/hcd.c | 6 + > > drivers/usb/misc/Kconfig | 23 + > > drivers/usb/misc/Makefile | 1 + > > drivers/usb/misc/onboard_usb_hub.c | 510 ++++++++++++++++++ > > include/linux/of_platform.h | 22 +- > > include/linux/usb/hcd.h | 1 + > > include/linux/usb/onboard_hub.h | 18 + > > 9 files changed, 592 insertions(+), 4 deletions(-) > > create mode 100644 Documentation/ABI/testing/sysfs-bus-platform-onboard-usb-hub > > create mode 100644 drivers/usb/misc/onboard_usb_hub.c > > create mode 100644 include/linux/usb/onboard_hub.h > > With v5.18-rc1 out the door, I wonder if it's a good time to look at > this series again. Are there any hidden blockers that it's waiting > for? Greg, please let me know if any further changes are needed or if this series can be landed.
Hi Greg, On 4/26/22 14:01, Greg Kroah-Hartman wrote: > On Thu, Apr 21, 2022 at 11:13:08AM -0700, Matthias Kaehlcke wrote: >> Hi, >> >> On Thu, Apr 07, 2022 at 12:41:22PM -0700, Doug Anderson wrote: >>> Hi, >>> >>> On Thu, Feb 17, 2022 at 10:43 AM Matthias Kaehlcke <mka@chromium.org> wrote: >>>> >>>> This series adds: >>>> - the onboard_usb_hub_driver >>>> - glue in the generic HCD code to create and destroy the >>>> onboard_usb_hub platform devices if needed >>>> - device tree changes that add RTS5411 entries for the QCA SC7180 >>>> based boards trogdor and lazor >>>> - a couple of stubs for platform device functions to avoid >>>> unresolved symbols with certain kernel configs >>>> >>>> The main issue the driver addresses is that a USB hub needs to be >>>> powered before it can be discovered. For discrete onboard hubs (an >>>> example for such a hub is the Realtek RTS5411) this is often solved >>>> by supplying the hub with an 'always-on' regulator, which is kind >>>> of a hack. Some onboard hubs may require further initialization >>>> steps, like changing the state of a GPIO or enabling a clock, which >>>> requires even more hacks. This driver creates a platform device >>>> representing the hub which performs the necessary initialization. >>>> Currently it only supports switching on a single regulator, support >>>> for multiple regulators or other actions can be added as needed. >>>> Different initialization sequences can be supported based on the >>>> compatible string. >>>> >>>> Besides performing the initialization the driver can be configured >>>> to power the hub off during system suspend. This can help to extend >>>> battery life on battery powered devices which have no requirements >>>> to keep the hub powered during suspend. The driver can also be >>>> configured to leave the hub powered when a wakeup capable USB device >>>> is connected when suspending, and power it off otherwise. >>>> >>>> Changes in v21: >>>> - dropped patch 'driver core: Export device_is_bound()' >>>> - refactored _find_onboard_hub() >>>> - removed 'onboard_hub_dev' symlinks from USB devices >>>> - dropped patch 'arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub' >>>> (will be sent separately) >>>> - rebased series on v5.17-rc4 >>>> >>>> Changes in v20: >>>> - addressed review comments from Stephen >>>> - changed DT node names for hubs >>>> >>>> Changes in v19: >>>> - added VID:PID pairs and compatible strings for RTS5414 hub >>>> - updated comments with RTS5411 USB versions to reflect those >>>> reported/supported by the hub >>>> - rebased series on v5.16 >>>> >>>> Changes in v18: >>>> - introduced hidden Kconfig option to align module vs. builtin >>>> choice with CONFIG_USB (thanks Doug!) >>>> - added patch 'driver core: Export device_is_bound()' >>>> - also adjust device tree of pompom rev1 >>>> - dropped the following patches, which aren't needed anymore by this >>>> series (though they might still be useful on their own): >>>> - usb: Specify dependencies on USB_XHCI_PLATFORM with 'depends on' >>>> - arm64: defconfig: Explicitly enable USB_XHCI_PLATFORM >>>> - ARM: configs: Explicitly enable USB_XHCI_PLATFORM where needed >>>> >>>> Changes in v17: >>>> - rebased on top of v5.16-rc1 >>>> - moved creation of onboard_hub platform devices from xhci_platform >>>> to the generic HCD code >>>> - addressed review comments for the onboard_hub driver >>>> - moved Kconfig/defconfig changes to the end of the series. The >>>> onboard_hub driver doesn't depend on XHCI_PLATFORM anymore, >>>> hence these changes aren't really required for the driver, but >>>> they still seem to be a worthwhile improvement >>>> >>>> Changes in v16: >>>> - added patch 'ARM: configs: Explicitly enable USB_XHCI_PLATFORM >>>> where needed' to keep arm32 defconfigs effectively unchanged >>>> >>>> Changes in v15: >>>> - adjusted dependencies of USB_DWC3_CORE to make sure it can only >>>> be enabled when at least one of USB_DWC3_HOST, USB_DWC3_GADGET >>>> or USB_DWC3_DUAL_ROLE is selectable >>>> >>>> Changes in v14: >>>> - rebased on top of v5.14-rc1 >>>> - dropped DT binding patch which landed in v5.13 >>>> >>>> Changes in v13: >>>> - added patch "usb: Specify dependency on USB_XHCI_PLATFORM with >>>> 'depends on'" to the series to avoid Kconfig conflicts >>>> - added patch "arm64: defconfig: Explicitly enable USB_XHCI_PLATFORM" >>>> to the series to keep effective defconfig unchanged >>>> >>>> Changes in v12: >>>> - onboard_hub driver: use IS_ENABLED(CONFIG_USB_ONBOARD_HUB_MODULE) >>>> in onboard_hub.h to also check for the driver built as module >>>> - onboard_hub_driver: include onboard_hub.h again to make sure there >>>> are prototype declarations for the public functions >>>> >>>> Changes in v11: >>>> - support multiple onboard hubs connected to the same parent >>>> - don't include ‘onboard_hub.h’ from the onboard hub driver >>>> >>>> Changes in v10: >>>> - always use of_is_onboard_usb_hub() stub unless ONBOARD_USB_HUB=y/m >>>> - keep 'regulator-boot-on' property for pp3300_hub >>>> >>>> Changes in v9: >>>> - added dependency on ONBOARD_USB_HUB (or !ONBOARD_USB_HUB) to >>>> USB_PLATFORM_XHCI >>>> >>>> Changes in v7: >>>> - updated DT binding >>>> - series rebased on qcom/arm64-for-5.13 >>>> >>>> Changes in v6: >>>> - updated summary >>>> >>>> Changes in v5: >>>> - cover letter added >>>> >>>> Matthias Kaehlcke (3): >>>> of/platform: Add stubs for of_platform_device_create/destroy() >>>> usb: misc: Add onboard_usb_hub driver >>>> usb: core: hcd: Create platform devices for onboard hubs in probe() >>>> >>>> .../sysfs-bus-platform-onboard-usb-hub | 8 + >>>> MAINTAINERS | 7 + >>>> drivers/usb/core/hcd.c | 6 + >>>> drivers/usb/misc/Kconfig | 23 + >>>> drivers/usb/misc/Makefile | 1 + >>>> drivers/usb/misc/onboard_usb_hub.c | 510 ++++++++++++++++++ >>>> include/linux/of_platform.h | 22 +- >>>> include/linux/usb/hcd.h | 1 + >>>> include/linux/usb/onboard_hub.h | 18 + >>>> 9 files changed, 592 insertions(+), 4 deletions(-) >>>> create mode 100644 Documentation/ABI/testing/sysfs-bus-platform-onboard-usb-hub >>>> create mode 100644 drivers/usb/misc/onboard_usb_hub.c >>>> create mode 100644 include/linux/usb/onboard_hub.h >>> >>> With v5.18-rc1 out the door, I wonder if it's a good time to look at >>> this series again. Are there any hidden blockers that it's waiting >>> for? >> >> Greg, please let me know if any further changes are needed or if this >> series can be landed. > > After 21 different versions, there's nothing left for me to object to, > so I'll go queue it up. Thanks for sticking with it. I just checked linux-next and this series is still not there. Are you going to merge it or are you waiting for v22? Thanks, Michal
On Tue, May 17, 2022 at 12:36:03PM +0200, Michal Simek wrote: > Hi Greg, > > On 4/26/22 14:01, Greg Kroah-Hartman wrote: > > On Thu, Apr 21, 2022 at 11:13:08AM -0700, Matthias Kaehlcke wrote: > > > Hi, > > > > > > On Thu, Apr 07, 2022 at 12:41:22PM -0700, Doug Anderson wrote: > > > > Hi, > > > > > > > > On Thu, Feb 17, 2022 at 10:43 AM Matthias Kaehlcke <mka@chromium.org> wrote: > > > > > > > > > > This series adds: > > > > > - the onboard_usb_hub_driver > > > > > - glue in the generic HCD code to create and destroy the > > > > > onboard_usb_hub platform devices if needed > > > > > - device tree changes that add RTS5411 entries for the QCA SC7180 > > > > > based boards trogdor and lazor > > > > > - a couple of stubs for platform device functions to avoid > > > > > unresolved symbols with certain kernel configs > > > > > > > > > > The main issue the driver addresses is that a USB hub needs to be > > > > > powered before it can be discovered. For discrete onboard hubs (an > > > > > example for such a hub is the Realtek RTS5411) this is often solved > > > > > by supplying the hub with an 'always-on' regulator, which is kind > > > > > of a hack. Some onboard hubs may require further initialization > > > > > steps, like changing the state of a GPIO or enabling a clock, which > > > > > requires even more hacks. This driver creates a platform device > > > > > representing the hub which performs the necessary initialization. > > > > > Currently it only supports switching on a single regulator, support > > > > > for multiple regulators or other actions can be added as needed. > > > > > Different initialization sequences can be supported based on the > > > > > compatible string. > > > > > > > > > > Besides performing the initialization the driver can be configured > > > > > to power the hub off during system suspend. This can help to extend > > > > > battery life on battery powered devices which have no requirements > > > > > to keep the hub powered during suspend. The driver can also be > > > > > configured to leave the hub powered when a wakeup capable USB device > > > > > is connected when suspending, and power it off otherwise. > > > > > > > > > > Changes in v21: > > > > > - dropped patch 'driver core: Export device_is_bound()' > > > > > - refactored _find_onboard_hub() > > > > > - removed 'onboard_hub_dev' symlinks from USB devices > > > > > - dropped patch 'arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub' > > > > > (will be sent separately) > > > > > - rebased series on v5.17-rc4 > > > > > > > > > > Changes in v20: > > > > > - addressed review comments from Stephen > > > > > - changed DT node names for hubs > > > > > > > > > > Changes in v19: > > > > > - added VID:PID pairs and compatible strings for RTS5414 hub > > > > > - updated comments with RTS5411 USB versions to reflect those > > > > > reported/supported by the hub > > > > > - rebased series on v5.16 > > > > > > > > > > Changes in v18: > > > > > - introduced hidden Kconfig option to align module vs. builtin > > > > > choice with CONFIG_USB (thanks Doug!) > > > > > - added patch 'driver core: Export device_is_bound()' > > > > > - also adjust device tree of pompom rev1 > > > > > - dropped the following patches, which aren't needed anymore by this > > > > > series (though they might still be useful on their own): > > > > > - usb: Specify dependencies on USB_XHCI_PLATFORM with 'depends on' > > > > > - arm64: defconfig: Explicitly enable USB_XHCI_PLATFORM > > > > > - ARM: configs: Explicitly enable USB_XHCI_PLATFORM where needed > > > > > > > > > > Changes in v17: > > > > > - rebased on top of v5.16-rc1 > > > > > - moved creation of onboard_hub platform devices from xhci_platform > > > > > to the generic HCD code > > > > > - addressed review comments for the onboard_hub driver > > > > > - moved Kconfig/defconfig changes to the end of the series. The > > > > > onboard_hub driver doesn't depend on XHCI_PLATFORM anymore, > > > > > hence these changes aren't really required for the driver, but > > > > > they still seem to be a worthwhile improvement > > > > > > > > > > Changes in v16: > > > > > - added patch 'ARM: configs: Explicitly enable USB_XHCI_PLATFORM > > > > > where needed' to keep arm32 defconfigs effectively unchanged > > > > > > > > > > Changes in v15: > > > > > - adjusted dependencies of USB_DWC3_CORE to make sure it can only > > > > > be enabled when at least one of USB_DWC3_HOST, USB_DWC3_GADGET > > > > > or USB_DWC3_DUAL_ROLE is selectable > > > > > > > > > > Changes in v14: > > > > > - rebased on top of v5.14-rc1 > > > > > - dropped DT binding patch which landed in v5.13 > > > > > > > > > > Changes in v13: > > > > > - added patch "usb: Specify dependency on USB_XHCI_PLATFORM with > > > > > 'depends on'" to the series to avoid Kconfig conflicts > > > > > - added patch "arm64: defconfig: Explicitly enable USB_XHCI_PLATFORM" > > > > > to the series to keep effective defconfig unchanged > > > > > > > > > > Changes in v12: > > > > > - onboard_hub driver: use IS_ENABLED(CONFIG_USB_ONBOARD_HUB_MODULE) > > > > > in onboard_hub.h to also check for the driver built as module > > > > > - onboard_hub_driver: include onboard_hub.h again to make sure there > > > > > are prototype declarations for the public functions > > > > > > > > > > Changes in v11: > > > > > - support multiple onboard hubs connected to the same parent > > > > > - don't include ‘onboard_hub.h’ from the onboard hub driver > > > > > > > > > > Changes in v10: > > > > > - always use of_is_onboard_usb_hub() stub unless ONBOARD_USB_HUB=y/m > > > > > - keep 'regulator-boot-on' property for pp3300_hub > > > > > > > > > > Changes in v9: > > > > > - added dependency on ONBOARD_USB_HUB (or !ONBOARD_USB_HUB) to > > > > > USB_PLATFORM_XHCI > > > > > > > > > > Changes in v7: > > > > > - updated DT binding > > > > > - series rebased on qcom/arm64-for-5.13 > > > > > > > > > > Changes in v6: > > > > > - updated summary > > > > > > > > > > Changes in v5: > > > > > - cover letter added > > > > > > > > > > Matthias Kaehlcke (3): > > > > > of/platform: Add stubs for of_platform_device_create/destroy() > > > > > usb: misc: Add onboard_usb_hub driver > > > > > usb: core: hcd: Create platform devices for onboard hubs in probe() > > > > > > > > > > .../sysfs-bus-platform-onboard-usb-hub | 8 + > > > > > MAINTAINERS | 7 + > > > > > drivers/usb/core/hcd.c | 6 + > > > > > drivers/usb/misc/Kconfig | 23 + > > > > > drivers/usb/misc/Makefile | 1 + > > > > > drivers/usb/misc/onboard_usb_hub.c | 510 ++++++++++++++++++ > > > > > include/linux/of_platform.h | 22 +- > > > > > include/linux/usb/hcd.h | 1 + > > > > > include/linux/usb/onboard_hub.h | 18 + > > > > > 9 files changed, 592 insertions(+), 4 deletions(-) > > > > > create mode 100644 Documentation/ABI/testing/sysfs-bus-platform-onboard-usb-hub > > > > > create mode 100644 drivers/usb/misc/onboard_usb_hub.c > > > > > create mode 100644 include/linux/usb/onboard_hub.h > > > > > > > > With v5.18-rc1 out the door, I wonder if it's a good time to look at > > > > this series again. Are there any hidden blockers that it's waiting > > > > for? > > > > > > Greg, please let me know if any further changes are needed or if this > > > series can be landed. > > > > After 21 different versions, there's nothing left for me to object to, > > so I'll go queue it up. Thanks for sticking with it. > > I just checked linux-next and this series is still not there. Are you going > to merge it or are you waiting for v22? It was merged, and I had to revert it based on reports of problems with it. See the thread here: https://lore.kernel.org/r/20220502210728.0b36f3cd@canb.auug.org.au for details. thanks, greg k-h
On 5/17/22 12:43, Greg Kroah-Hartman wrote: > On Tue, May 17, 2022 at 12:36:03PM +0200, Michal Simek wrote: >> Hi Greg, >> >> On 4/26/22 14:01, Greg Kroah-Hartman wrote: >>> On Thu, Apr 21, 2022 at 11:13:08AM -0700, Matthias Kaehlcke wrote: >>>> Hi, >>>> >>>> On Thu, Apr 07, 2022 at 12:41:22PM -0700, Doug Anderson wrote: >>>>> Hi, >>>>> >>>>> On Thu, Feb 17, 2022 at 10:43 AM Matthias Kaehlcke <mka@chromium.org> wrote: >>>>>> >>>>>> This series adds: >>>>>> - the onboard_usb_hub_driver >>>>>> - glue in the generic HCD code to create and destroy the >>>>>> onboard_usb_hub platform devices if needed >>>>>> - device tree changes that add RTS5411 entries for the QCA SC7180 >>>>>> based boards trogdor and lazor >>>>>> - a couple of stubs for platform device functions to avoid >>>>>> unresolved symbols with certain kernel configs >>>>>> >>>>>> The main issue the driver addresses is that a USB hub needs to be >>>>>> powered before it can be discovered. For discrete onboard hubs (an >>>>>> example for such a hub is the Realtek RTS5411) this is often solved >>>>>> by supplying the hub with an 'always-on' regulator, which is kind >>>>>> of a hack. Some onboard hubs may require further initialization >>>>>> steps, like changing the state of a GPIO or enabling a clock, which >>>>>> requires even more hacks. This driver creates a platform device >>>>>> representing the hub which performs the necessary initialization. >>>>>> Currently it only supports switching on a single regulator, support >>>>>> for multiple regulators or other actions can be added as needed. >>>>>> Different initialization sequences can be supported based on the >>>>>> compatible string. >>>>>> >>>>>> Besides performing the initialization the driver can be configured >>>>>> to power the hub off during system suspend. This can help to extend >>>>>> battery life on battery powered devices which have no requirements >>>>>> to keep the hub powered during suspend. The driver can also be >>>>>> configured to leave the hub powered when a wakeup capable USB device >>>>>> is connected when suspending, and power it off otherwise. >>>>>> >>>>>> Changes in v21: >>>>>> - dropped patch 'driver core: Export device_is_bound()' >>>>>> - refactored _find_onboard_hub() >>>>>> - removed 'onboard_hub_dev' symlinks from USB devices >>>>>> - dropped patch 'arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub' >>>>>> (will be sent separately) >>>>>> - rebased series on v5.17-rc4 >>>>>> >>>>>> Changes in v20: >>>>>> - addressed review comments from Stephen >>>>>> - changed DT node names for hubs >>>>>> >>>>>> Changes in v19: >>>>>> - added VID:PID pairs and compatible strings for RTS5414 hub >>>>>> - updated comments with RTS5411 USB versions to reflect those >>>>>> reported/supported by the hub >>>>>> - rebased series on v5.16 >>>>>> >>>>>> Changes in v18: >>>>>> - introduced hidden Kconfig option to align module vs. builtin >>>>>> choice with CONFIG_USB (thanks Doug!) >>>>>> - added patch 'driver core: Export device_is_bound()' >>>>>> - also adjust device tree of pompom rev1 >>>>>> - dropped the following patches, which aren't needed anymore by this >>>>>> series (though they might still be useful on their own): >>>>>> - usb: Specify dependencies on USB_XHCI_PLATFORM with 'depends on' >>>>>> - arm64: defconfig: Explicitly enable USB_XHCI_PLATFORM >>>>>> - ARM: configs: Explicitly enable USB_XHCI_PLATFORM where needed >>>>>> >>>>>> Changes in v17: >>>>>> - rebased on top of v5.16-rc1 >>>>>> - moved creation of onboard_hub platform devices from xhci_platform >>>>>> to the generic HCD code >>>>>> - addressed review comments for the onboard_hub driver >>>>>> - moved Kconfig/defconfig changes to the end of the series. The >>>>>> onboard_hub driver doesn't depend on XHCI_PLATFORM anymore, >>>>>> hence these changes aren't really required for the driver, but >>>>>> they still seem to be a worthwhile improvement >>>>>> >>>>>> Changes in v16: >>>>>> - added patch 'ARM: configs: Explicitly enable USB_XHCI_PLATFORM >>>>>> where needed' to keep arm32 defconfigs effectively unchanged >>>>>> >>>>>> Changes in v15: >>>>>> - adjusted dependencies of USB_DWC3_CORE to make sure it can only >>>>>> be enabled when at least one of USB_DWC3_HOST, USB_DWC3_GADGET >>>>>> or USB_DWC3_DUAL_ROLE is selectable >>>>>> >>>>>> Changes in v14: >>>>>> - rebased on top of v5.14-rc1 >>>>>> - dropped DT binding patch which landed in v5.13 >>>>>> >>>>>> Changes in v13: >>>>>> - added patch "usb: Specify dependency on USB_XHCI_PLATFORM with >>>>>> 'depends on'" to the series to avoid Kconfig conflicts >>>>>> - added patch "arm64: defconfig: Explicitly enable USB_XHCI_PLATFORM" >>>>>> to the series to keep effective defconfig unchanged >>>>>> >>>>>> Changes in v12: >>>>>> - onboard_hub driver: use IS_ENABLED(CONFIG_USB_ONBOARD_HUB_MODULE) >>>>>> in onboard_hub.h to also check for the driver built as module >>>>>> - onboard_hub_driver: include onboard_hub.h again to make sure there >>>>>> are prototype declarations for the public functions >>>>>> >>>>>> Changes in v11: >>>>>> - support multiple onboard hubs connected to the same parent >>>>>> - don't include ‘onboard_hub.h’ from the onboard hub driver >>>>>> >>>>>> Changes in v10: >>>>>> - always use of_is_onboard_usb_hub() stub unless ONBOARD_USB_HUB=y/m >>>>>> - keep 'regulator-boot-on' property for pp3300_hub >>>>>> >>>>>> Changes in v9: >>>>>> - added dependency on ONBOARD_USB_HUB (or !ONBOARD_USB_HUB) to >>>>>> USB_PLATFORM_XHCI >>>>>> >>>>>> Changes in v7: >>>>>> - updated DT binding >>>>>> - series rebased on qcom/arm64-for-5.13 >>>>>> >>>>>> Changes in v6: >>>>>> - updated summary >>>>>> >>>>>> Changes in v5: >>>>>> - cover letter added >>>>>> >>>>>> Matthias Kaehlcke (3): >>>>>> of/platform: Add stubs for of_platform_device_create/destroy() >>>>>> usb: misc: Add onboard_usb_hub driver >>>>>> usb: core: hcd: Create platform devices for onboard hubs in probe() >>>>>> >>>>>> .../sysfs-bus-platform-onboard-usb-hub | 8 + >>>>>> MAINTAINERS | 7 + >>>>>> drivers/usb/core/hcd.c | 6 + >>>>>> drivers/usb/misc/Kconfig | 23 + >>>>>> drivers/usb/misc/Makefile | 1 + >>>>>> drivers/usb/misc/onboard_usb_hub.c | 510 ++++++++++++++++++ >>>>>> include/linux/of_platform.h | 22 +- >>>>>> include/linux/usb/hcd.h | 1 + >>>>>> include/linux/usb/onboard_hub.h | 18 + >>>>>> 9 files changed, 592 insertions(+), 4 deletions(-) >>>>>> create mode 100644 Documentation/ABI/testing/sysfs-bus-platform-onboard-usb-hub >>>>>> create mode 100644 drivers/usb/misc/onboard_usb_hub.c >>>>>> create mode 100644 include/linux/usb/onboard_hub.h >>>>> >>>>> With v5.18-rc1 out the door, I wonder if it's a good time to look at >>>>> this series again. Are there any hidden blockers that it's waiting >>>>> for? >>>> >>>> Greg, please let me know if any further changes are needed or if this >>>> series can be landed. >>> >>> After 21 different versions, there's nothing left for me to object to, >>> so I'll go queue it up. Thanks for sticking with it. >> >> I just checked linux-next and this series is still not there. Are you going >> to merge it or are you waiting for v22? > > It was merged, and I had to revert it based on reports of problems with > it. See the thread here: > https://lore.kernel.org/r/20220502210728.0b36f3cd@canb.auug.org.au > for details. Matthias: Are you going to send v22 version? Thanks, Michal
On Tue, May 17, 2022 at 01:06:29PM +0200, Michal Simek wrote: > > > On 5/17/22 12:43, Greg Kroah-Hartman wrote: > > On Tue, May 17, 2022 at 12:36:03PM +0200, Michal Simek wrote: > > > Hi Greg, > > > > > > On 4/26/22 14:01, Greg Kroah-Hartman wrote: > > > > On Thu, Apr 21, 2022 at 11:13:08AM -0700, Matthias Kaehlcke wrote: > > > > > Hi, > > > > > > > > > > On Thu, Apr 07, 2022 at 12:41:22PM -0700, Doug Anderson wrote: > > > > > > Hi, > > > > > > > > > > > > On Thu, Feb 17, 2022 at 10:43 AM Matthias Kaehlcke <mka@chromium.org> wrote: > > > > > > > > > > > > > > This series adds: > > > > > > > - the onboard_usb_hub_driver > > > > > > > - glue in the generic HCD code to create and destroy the > > > > > > > onboard_usb_hub platform devices if needed > > > > > > > - device tree changes that add RTS5411 entries for the QCA SC7180 > > > > > > > based boards trogdor and lazor > > > > > > > - a couple of stubs for platform device functions to avoid > > > > > > > unresolved symbols with certain kernel configs > > > > > > > > > > > > > > The main issue the driver addresses is that a USB hub needs to be > > > > > > > powered before it can be discovered. For discrete onboard hubs (an > > > > > > > example for such a hub is the Realtek RTS5411) this is often solved > > > > > > > by supplying the hub with an 'always-on' regulator, which is kind > > > > > > > of a hack. Some onboard hubs may require further initialization > > > > > > > steps, like changing the state of a GPIO or enabling a clock, which > > > > > > > requires even more hacks. This driver creates a platform device > > > > > > > representing the hub which performs the necessary initialization. > > > > > > > Currently it only supports switching on a single regulator, support > > > > > > > for multiple regulators or other actions can be added as needed. > > > > > > > Different initialization sequences can be supported based on the > > > > > > > compatible string. > > > > > > > > > > > > > > Besides performing the initialization the driver can be configured > > > > > > > to power the hub off during system suspend. This can help to extend > > > > > > > battery life on battery powered devices which have no requirements > > > > > > > to keep the hub powered during suspend. The driver can also be > > > > > > > configured to leave the hub powered when a wakeup capable USB device > > > > > > > is connected when suspending, and power it off otherwise. > > > > > > > > > > > > > > Changes in v21: > > > > > > > - dropped patch 'driver core: Export device_is_bound()' > > > > > > > - refactored _find_onboard_hub() > > > > > > > - removed 'onboard_hub_dev' symlinks from USB devices > > > > > > > - dropped patch 'arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub' > > > > > > > (will be sent separately) > > > > > > > - rebased series on v5.17-rc4 > > > > > > > > > > > > > > Changes in v20: > > > > > > > - addressed review comments from Stephen > > > > > > > - changed DT node names for hubs > > > > > > > > > > > > > > Changes in v19: > > > > > > > - added VID:PID pairs and compatible strings for RTS5414 hub > > > > > > > - updated comments with RTS5411 USB versions to reflect those > > > > > > > reported/supported by the hub > > > > > > > - rebased series on v5.16 > > > > > > > > > > > > > > Changes in v18: > > > > > > > - introduced hidden Kconfig option to align module vs. builtin > > > > > > > choice with CONFIG_USB (thanks Doug!) > > > > > > > - added patch 'driver core: Export device_is_bound()' > > > > > > > - also adjust device tree of pompom rev1 > > > > > > > - dropped the following patches, which aren't needed anymore by this > > > > > > > series (though they might still be useful on their own): > > > > > > > - usb: Specify dependencies on USB_XHCI_PLATFORM with 'depends on' > > > > > > > - arm64: defconfig: Explicitly enable USB_XHCI_PLATFORM > > > > > > > - ARM: configs: Explicitly enable USB_XHCI_PLATFORM where needed > > > > > > > > > > > > > > Changes in v17: > > > > > > > - rebased on top of v5.16-rc1 > > > > > > > - moved creation of onboard_hub platform devices from xhci_platform > > > > > > > to the generic HCD code > > > > > > > - addressed review comments for the onboard_hub driver > > > > > > > - moved Kconfig/defconfig changes to the end of the series. The > > > > > > > onboard_hub driver doesn't depend on XHCI_PLATFORM anymore, > > > > > > > hence these changes aren't really required for the driver, but > > > > > > > they still seem to be a worthwhile improvement > > > > > > > > > > > > > > Changes in v16: > > > > > > > - added patch 'ARM: configs: Explicitly enable USB_XHCI_PLATFORM > > > > > > > where needed' to keep arm32 defconfigs effectively unchanged > > > > > > > > > > > > > > Changes in v15: > > > > > > > - adjusted dependencies of USB_DWC3_CORE to make sure it can only > > > > > > > be enabled when at least one of USB_DWC3_HOST, USB_DWC3_GADGET > > > > > > > or USB_DWC3_DUAL_ROLE is selectable > > > > > > > > > > > > > > Changes in v14: > > > > > > > - rebased on top of v5.14-rc1 > > > > > > > - dropped DT binding patch which landed in v5.13 > > > > > > > > > > > > > > Changes in v13: > > > > > > > - added patch "usb: Specify dependency on USB_XHCI_PLATFORM with > > > > > > > 'depends on'" to the series to avoid Kconfig conflicts > > > > > > > - added patch "arm64: defconfig: Explicitly enable USB_XHCI_PLATFORM" > > > > > > > to the series to keep effective defconfig unchanged > > > > > > > > > > > > > > Changes in v12: > > > > > > > - onboard_hub driver: use IS_ENABLED(CONFIG_USB_ONBOARD_HUB_MODULE) > > > > > > > in onboard_hub.h to also check for the driver built as module > > > > > > > - onboard_hub_driver: include onboard_hub.h again to make sure there > > > > > > > are prototype declarations for the public functions > > > > > > > > > > > > > > Changes in v11: > > > > > > > - support multiple onboard hubs connected to the same parent > > > > > > > - don't include ‘onboard_hub.h’ from the onboard hub driver > > > > > > > > > > > > > > Changes in v10: > > > > > > > - always use of_is_onboard_usb_hub() stub unless ONBOARD_USB_HUB=y/m > > > > > > > - keep 'regulator-boot-on' property for pp3300_hub > > > > > > > > > > > > > > Changes in v9: > > > > > > > - added dependency on ONBOARD_USB_HUB (or !ONBOARD_USB_HUB) to > > > > > > > USB_PLATFORM_XHCI > > > > > > > > > > > > > > Changes in v7: > > > > > > > - updated DT binding > > > > > > > - series rebased on qcom/arm64-for-5.13 > > > > > > > > > > > > > > Changes in v6: > > > > > > > - updated summary > > > > > > > > > > > > > > Changes in v5: > > > > > > > - cover letter added > > > > > > > > > > > > > > Matthias Kaehlcke (3): > > > > > > > of/platform: Add stubs for of_platform_device_create/destroy() > > > > > > > usb: misc: Add onboard_usb_hub driver > > > > > > > usb: core: hcd: Create platform devices for onboard hubs in probe() > > > > > > > > > > > > > > .../sysfs-bus-platform-onboard-usb-hub | 8 + > > > > > > > MAINTAINERS | 7 + > > > > > > > drivers/usb/core/hcd.c | 6 + > > > > > > > drivers/usb/misc/Kconfig | 23 + > > > > > > > drivers/usb/misc/Makefile | 1 + > > > > > > > drivers/usb/misc/onboard_usb_hub.c | 510 ++++++++++++++++++ > > > > > > > include/linux/of_platform.h | 22 +- > > > > > > > include/linux/usb/hcd.h | 1 + > > > > > > > include/linux/usb/onboard_hub.h | 18 + > > > > > > > 9 files changed, 592 insertions(+), 4 deletions(-) > > > > > > > create mode 100644 Documentation/ABI/testing/sysfs-bus-platform-onboard-usb-hub > > > > > > > create mode 100644 drivers/usb/misc/onboard_usb_hub.c > > > > > > > create mode 100644 include/linux/usb/onboard_hub.h > > > > > > > > > > > > With v5.18-rc1 out the door, I wonder if it's a good time to look at > > > > > > this series again. Are there any hidden blockers that it's waiting > > > > > > for? > > > > > > > > > > Greg, please let me know if any further changes are needed or if this > > > > > series can be landed. > > > > > > > > After 21 different versions, there's nothing left for me to object to, > > > > so I'll go queue it up. Thanks for sticking with it. > > > > > > I just checked linux-next and this series is still not there. Are you going > > > to merge it or are you waiting for v22? > > > > It was merged, and I had to revert it based on reports of problems with > > it. See the thread here: > > https://lore.kernel.org/r/20220502210728.0b36f3cd@canb.auug.org.au > > for details. > > Matthias: Are you going to send v22 version? Greg wasn't too convinced [1] about the solution I had in mind (linking onboard_hub_create/destroy_pdevs() into the USB core module) and offered to look into it. It seems he hasn't found time for that yet. I plan to send out v22 with the above solution in the next days if Greg doesn't propose something better in the meantime. [1] https://lore.kernel.org/all/YnAVxtQNOOhtz3lO@kroah.com/
On Tue, May 17, 2022 at 08:20:14AM -0700, Matthias Kaehlcke wrote: > On Tue, May 17, 2022 at 01:06:29PM +0200, Michal Simek wrote: > > > > > > On 5/17/22 12:43, Greg Kroah-Hartman wrote: > > > On Tue, May 17, 2022 at 12:36:03PM +0200, Michal Simek wrote: > > > > Hi Greg, > > > > > > > > On 4/26/22 14:01, Greg Kroah-Hartman wrote: > > > > > On Thu, Apr 21, 2022 at 11:13:08AM -0700, Matthias Kaehlcke wrote: > > > > > > Hi, > > > > > > > > > > > > On Thu, Apr 07, 2022 at 12:41:22PM -0700, Doug Anderson wrote: > > > > > > > Hi, > > > > > > > > > > > > > > On Thu, Feb 17, 2022 at 10:43 AM Matthias Kaehlcke <mka@chromium.org> wrote: > > > > > > > > > > > > > > > > This series adds: > > > > > > > > - the onboard_usb_hub_driver > > > > > > > > - glue in the generic HCD code to create and destroy the > > > > > > > > onboard_usb_hub platform devices if needed > > > > > > > > - device tree changes that add RTS5411 entries for the QCA SC7180 > > > > > > > > based boards trogdor and lazor > > > > > > > > - a couple of stubs for platform device functions to avoid > > > > > > > > unresolved symbols with certain kernel configs > > > > > > > > > > > > > > > > The main issue the driver addresses is that a USB hub needs to be > > > > > > > > powered before it can be discovered. For discrete onboard hubs (an > > > > > > > > example for such a hub is the Realtek RTS5411) this is often solved > > > > > > > > by supplying the hub with an 'always-on' regulator, which is kind > > > > > > > > of a hack. Some onboard hubs may require further initialization > > > > > > > > steps, like changing the state of a GPIO or enabling a clock, which > > > > > > > > requires even more hacks. This driver creates a platform device > > > > > > > > representing the hub which performs the necessary initialization. > > > > > > > > Currently it only supports switching on a single regulator, support > > > > > > > > for multiple regulators or other actions can be added as needed. > > > > > > > > Different initialization sequences can be supported based on the > > > > > > > > compatible string. > > > > > > > > > > > > > > > > Besides performing the initialization the driver can be configured > > > > > > > > to power the hub off during system suspend. This can help to extend > > > > > > > > battery life on battery powered devices which have no requirements > > > > > > > > to keep the hub powered during suspend. The driver can also be > > > > > > > > configured to leave the hub powered when a wakeup capable USB device > > > > > > > > is connected when suspending, and power it off otherwise. > > > > > > > > > > > > > > > > Changes in v21: > > > > > > > > - dropped patch 'driver core: Export device_is_bound()' > > > > > > > > - refactored _find_onboard_hub() > > > > > > > > - removed 'onboard_hub_dev' symlinks from USB devices > > > > > > > > - dropped patch 'arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub' > > > > > > > > (will be sent separately) > > > > > > > > - rebased series on v5.17-rc4 > > > > > > > > > > > > > > > > Changes in v20: > > > > > > > > - addressed review comments from Stephen > > > > > > > > - changed DT node names for hubs > > > > > > > > > > > > > > > > Changes in v19: > > > > > > > > - added VID:PID pairs and compatible strings for RTS5414 hub > > > > > > > > - updated comments with RTS5411 USB versions to reflect those > > > > > > > > reported/supported by the hub > > > > > > > > - rebased series on v5.16 > > > > > > > > > > > > > > > > Changes in v18: > > > > > > > > - introduced hidden Kconfig option to align module vs. builtin > > > > > > > > choice with CONFIG_USB (thanks Doug!) > > > > > > > > - added patch 'driver core: Export device_is_bound()' > > > > > > > > - also adjust device tree of pompom rev1 > > > > > > > > - dropped the following patches, which aren't needed anymore by this > > > > > > > > series (though they might still be useful on their own): > > > > > > > > - usb: Specify dependencies on USB_XHCI_PLATFORM with 'depends on' > > > > > > > > - arm64: defconfig: Explicitly enable USB_XHCI_PLATFORM > > > > > > > > - ARM: configs: Explicitly enable USB_XHCI_PLATFORM where needed > > > > > > > > > > > > > > > > Changes in v17: > > > > > > > > - rebased on top of v5.16-rc1 > > > > > > > > - moved creation of onboard_hub platform devices from xhci_platform > > > > > > > > to the generic HCD code > > > > > > > > - addressed review comments for the onboard_hub driver > > > > > > > > - moved Kconfig/defconfig changes to the end of the series. The > > > > > > > > onboard_hub driver doesn't depend on XHCI_PLATFORM anymore, > > > > > > > > hence these changes aren't really required for the driver, but > > > > > > > > they still seem to be a worthwhile improvement > > > > > > > > > > > > > > > > Changes in v16: > > > > > > > > - added patch 'ARM: configs: Explicitly enable USB_XHCI_PLATFORM > > > > > > > > where needed' to keep arm32 defconfigs effectively unchanged > > > > > > > > > > > > > > > > Changes in v15: > > > > > > > > - adjusted dependencies of USB_DWC3_CORE to make sure it can only > > > > > > > > be enabled when at least one of USB_DWC3_HOST, USB_DWC3_GADGET > > > > > > > > or USB_DWC3_DUAL_ROLE is selectable > > > > > > > > > > > > > > > > Changes in v14: > > > > > > > > - rebased on top of v5.14-rc1 > > > > > > > > - dropped DT binding patch which landed in v5.13 > > > > > > > > > > > > > > > > Changes in v13: > > > > > > > > - added patch "usb: Specify dependency on USB_XHCI_PLATFORM with > > > > > > > > 'depends on'" to the series to avoid Kconfig conflicts > > > > > > > > - added patch "arm64: defconfig: Explicitly enable USB_XHCI_PLATFORM" > > > > > > > > to the series to keep effective defconfig unchanged > > > > > > > > > > > > > > > > Changes in v12: > > > > > > > > - onboard_hub driver: use IS_ENABLED(CONFIG_USB_ONBOARD_HUB_MODULE) > > > > > > > > in onboard_hub.h to also check for the driver built as module > > > > > > > > - onboard_hub_driver: include onboard_hub.h again to make sure there > > > > > > > > are prototype declarations for the public functions > > > > > > > > > > > > > > > > Changes in v11: > > > > > > > > - support multiple onboard hubs connected to the same parent > > > > > > > > - don't include ‘onboard_hub.h’ from the onboard hub driver > > > > > > > > > > > > > > > > Changes in v10: > > > > > > > > - always use of_is_onboard_usb_hub() stub unless ONBOARD_USB_HUB=y/m > > > > > > > > - keep 'regulator-boot-on' property for pp3300_hub > > > > > > > > > > > > > > > > Changes in v9: > > > > > > > > - added dependency on ONBOARD_USB_HUB (or !ONBOARD_USB_HUB) to > > > > > > > > USB_PLATFORM_XHCI > > > > > > > > > > > > > > > > Changes in v7: > > > > > > > > - updated DT binding > > > > > > > > - series rebased on qcom/arm64-for-5.13 > > > > > > > > > > > > > > > > Changes in v6: > > > > > > > > - updated summary > > > > > > > > > > > > > > > > Changes in v5: > > > > > > > > - cover letter added > > > > > > > > > > > > > > > > Matthias Kaehlcke (3): > > > > > > > > of/platform: Add stubs for of_platform_device_create/destroy() > > > > > > > > usb: misc: Add onboard_usb_hub driver > > > > > > > > usb: core: hcd: Create platform devices for onboard hubs in probe() > > > > > > > > > > > > > > > > .../sysfs-bus-platform-onboard-usb-hub | 8 + > > > > > > > > MAINTAINERS | 7 + > > > > > > > > drivers/usb/core/hcd.c | 6 + > > > > > > > > drivers/usb/misc/Kconfig | 23 + > > > > > > > > drivers/usb/misc/Makefile | 1 + > > > > > > > > drivers/usb/misc/onboard_usb_hub.c | 510 ++++++++++++++++++ > > > > > > > > include/linux/of_platform.h | 22 +- > > > > > > > > include/linux/usb/hcd.h | 1 + > > > > > > > > include/linux/usb/onboard_hub.h | 18 + > > > > > > > > 9 files changed, 592 insertions(+), 4 deletions(-) > > > > > > > > create mode 100644 Documentation/ABI/testing/sysfs-bus-platform-onboard-usb-hub > > > > > > > > create mode 100644 drivers/usb/misc/onboard_usb_hub.c > > > > > > > > create mode 100644 include/linux/usb/onboard_hub.h > > > > > > > > > > > > > > With v5.18-rc1 out the door, I wonder if it's a good time to look at > > > > > > > this series again. Are there any hidden blockers that it's waiting > > > > > > > for? > > > > > > > > > > > > Greg, please let me know if any further changes are needed or if this > > > > > > series can be landed. > > > > > > > > > > After 21 different versions, there's nothing left for me to object to, > > > > > so I'll go queue it up. Thanks for sticking with it. > > > > > > > > I just checked linux-next and this series is still not there. Are you going > > > > to merge it or are you waiting for v22? > > > > > > It was merged, and I had to revert it based on reports of problems with > > > it. See the thread here: > > > https://lore.kernel.org/r/20220502210728.0b36f3cd@canb.auug.org.au > > > for details. > > > > Matthias: Are you going to send v22 version? > > Greg wasn't too convinced [1] about the solution I had in mind (linking > onboard_hub_create/destroy_pdevs() into the USB core module) and offered to > look into it. It seems he hasn't found time for that yet. I plan to send out > v22 with the above solution in the next days if Greg doesn't propose > something better in the meantime. > > [1] https://lore.kernel.org/all/YnAVxtQNOOhtz3lO@kroah.com/ I'll try to look at this during the merge window if I have the chance. But as I'll be at a conference during that timeframe, I might not be able to, sorry. greg k-h