diff mbox series

[07/12] crypto: qat - set to zero DH parameters before free

Message ID 20220506082327.21605-8-giovanni.cabiddu@intel.com
State Superseded
Headers show
Series [01/12] crypto: qat - use pre-allocated buffers in datapath | expand

Commit Message

Cabiddu, Giovanni May 6, 2022, 8:23 a.m. UTC
Set to zero the DH context buffers containing the DH key before they are
freed.

Cc: stable@vger.kernel.org
Fixes: c9839143ebbf ("crypto: qat - Add DH support")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
---
 drivers/crypto/qat/qat_common/qat_asym_algs.c | 3 +++
 1 file changed, 3 insertions(+)

Comments

Greg Kroah-Hartman May 6, 2022, 9:23 a.m. UTC | #1
On Fri, May 06, 2022 at 09:23:22AM +0100, Giovanni Cabiddu wrote:
> Set to zero the DH context buffers containing the DH key before they are
> freed.

That says what, but not why.

> Cc: stable@vger.kernel.org
> Fixes: c9839143ebbf ("crypto: qat - Add DH support")
> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
> Reviewed-by: Adam Guerin <adam.guerin@intel.com>
> Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
> ---
>  drivers/crypto/qat/qat_common/qat_asym_algs.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/crypto/qat/qat_common/qat_asym_algs.c b/drivers/crypto/qat/qat_common/qat_asym_algs.c
> index d75eb77c9fb9..2fec89b8a188 100644
> --- a/drivers/crypto/qat/qat_common/qat_asym_algs.c
> +++ b/drivers/crypto/qat/qat_common/qat_asym_algs.c
> @@ -421,14 +421,17 @@ static int qat_dh_set_params(struct qat_dh_ctx *ctx, struct dh *params)
>  static void qat_dh_clear_ctx(struct device *dev, struct qat_dh_ctx *ctx)
>  {
>  	if (ctx->g) {
> +		memzero_explicit(ctx->g, ctx->p_size);
>  		dma_free_coherent(dev, ctx->p_size, ctx->g, ctx->dma_g);

Why is a memset() not sufficient here?
And what is this solving?  Who would get this stale data?

thanks,

greg k-h
Eric Biggers May 7, 2022, 6:52 p.m. UTC | #2
On Fri, May 06, 2022 at 04:41:52PM +0200, Greg KH wrote:
> On Fri, May 06, 2022 at 11:01:17AM +0100, Giovanni Cabiddu wrote:
> > On Fri, May 06, 2022 at 11:23:50AM +0200, Greg KH wrote:
> > > On Fri, May 06, 2022 at 09:23:22AM +0100, Giovanni Cabiddu wrote:
> > > > Set to zero the DH context buffers containing the DH key before they are
> > > > freed.
> > > 
> > > That says what, but not why.
> > > 
> > > > Cc: stable@vger.kernel.org
> > > > Fixes: c9839143ebbf ("crypto: qat - Add DH support")
> > > > Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
> > > > Reviewed-by: Adam Guerin <adam.guerin@intel.com>
> > > > Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
> > > > ---
> > > >  drivers/crypto/qat/qat_common/qat_asym_algs.c | 3 +++
> > > >  1 file changed, 3 insertions(+)
> > > > 
> > > > diff --git a/drivers/crypto/qat/qat_common/qat_asym_algs.c b/drivers/crypto/qat/qat_common/qat_asym_algs.c
> > > > index d75eb77c9fb9..2fec89b8a188 100644
> > > > --- a/drivers/crypto/qat/qat_common/qat_asym_algs.c
> > > > +++ b/drivers/crypto/qat/qat_common/qat_asym_algs.c
> > > > @@ -421,14 +421,17 @@ static int qat_dh_set_params(struct qat_dh_ctx *ctx, struct dh *params)
> > > >  static void qat_dh_clear_ctx(struct device *dev, struct qat_dh_ctx *ctx)
> > > >  {
> > > >  	if (ctx->g) {
> > > > +		memzero_explicit(ctx->g, ctx->p_size);
> > > >  		dma_free_coherent(dev, ctx->p_size, ctx->g, ctx->dma_g);
> > > 
> > > Why is a memset() not sufficient here?
> > Based on the previous conversation a memset() should be sufficient.
> > 
> > > And what is this solving?  Who would get this stale data?
> > This is to make sure the buffer containing sensitive data (i.e. a key)
> > is not leaked out by a subsequent allocation.
> 
> But as all sane distros have CONFIG_INIT_ON_ALLOC_DEFAULT_ON enabled,
> right?  That should handle any worries you have with secrets being on
> the heap.  But even then, are you trying to protect yourself against
> other kernel modules?  Think this through...
> 

This patch looks fine to me; it's always recommended to zero out crypto keys at
the end of their lifetime so that they can't be recovered from free memory if
system memory is compromised before the memory happens to be allocated and
overwritten again.  See the hundreds of existing callers of kfree_sensitive(),
which exist for exactly this reason.

Note that preventing the key from being "leaked out by a subsequent allocation"
is *not* the point, and thus CONFIG_INIT_ON_ALLOC_DEFAULT_ON is irrelevant.

- Eric
diff mbox series

Patch

diff --git a/drivers/crypto/qat/qat_common/qat_asym_algs.c b/drivers/crypto/qat/qat_common/qat_asym_algs.c
index d75eb77c9fb9..2fec89b8a188 100644
--- a/drivers/crypto/qat/qat_common/qat_asym_algs.c
+++ b/drivers/crypto/qat/qat_common/qat_asym_algs.c
@@ -421,14 +421,17 @@  static int qat_dh_set_params(struct qat_dh_ctx *ctx, struct dh *params)
 static void qat_dh_clear_ctx(struct device *dev, struct qat_dh_ctx *ctx)
 {
 	if (ctx->g) {
+		memzero_explicit(ctx->g, ctx->p_size);
 		dma_free_coherent(dev, ctx->p_size, ctx->g, ctx->dma_g);
 		ctx->g = NULL;
 	}
 	if (ctx->xa) {
+		memzero_explicit(ctx->xa, ctx->p_size);
 		dma_free_coherent(dev, ctx->p_size, ctx->xa, ctx->dma_xa);
 		ctx->xa = NULL;
 	}
 	if (ctx->p) {
+		memzero_explicit(ctx->p, ctx->p_size);
 		dma_free_coherent(dev, ctx->p_size, ctx->p, ctx->dma_p);
 		ctx->p = NULL;
 	}