acpi/battery: Make "not-charging" the default on no charging or full info

When the battery is neither charging or discharging and is not full,
"not-charging" is a useful status description for the case in general.
Currently this state is set as "unknown" by default, expect when this is
explicitly replaced with "not-charging" on a per device or per vendor
basis.

A lot of devices have this state without a BIOS specification available
explicitly describing it. e.g. some current Clevo barebones have a BIOS
setting to stop charging at a user defined battery level.

Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
---
 drivers/acpi/battery.c | 24 +-----------------------
 1 file changed, 1 insertion(+), 23 deletions(-)

On Wed, Apr 27, 2022 at 5:41 PM Werner Sembach <wse@tuxedocomputers.com> wrote:
>
> When the battery is neither charging or discharging and is not full,
> "not-charging" is a useful status description for the case in general.
> Currently this state is set as "unknown" by default, expect when this is
> explicitly replaced with "not-charging" on a per device or per vendor
> basis.
>
> A lot of devices have this state without a BIOS specification available
> explicitly describing it. e.g. some current Clevo barebones have a BIOS
> setting to stop charging at a user defined battery level.
>
> Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
> ---
>  drivers/acpi/battery.c | 24 +-----------------------
>  1 file changed, 1 insertion(+), 23 deletions(-)
>
> diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
> index dc208f5f5a1f..306513fec1e1 100644
> --- a/drivers/acpi/battery.c
> +++ b/drivers/acpi/battery.c
> @@ -52,7 +52,6 @@ static bool battery_driver_registered;
>  static int battery_bix_broken_package;
>  static int battery_notification_delay_ms;
>  static int battery_ac_is_broken;
> -static int battery_quirk_notcharging;
>  static unsigned int cache_time = 1000;
>  module_param(cache_time, uint, 0644);
>  MODULE_PARM_DESC(cache_time, "cache time in milliseconds");
> @@ -216,10 +215,8 @@ static int acpi_battery_get_property(struct power_supply *psy,
>                         val->intval = POWER_SUPPLY_STATUS_CHARGING;
>                 else if (acpi_battery_is_charged(battery))
>                         val->intval = POWER_SUPPLY_STATUS_FULL;
> -               else if (battery_quirk_notcharging)
> -                       val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
>                 else
> -                       val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
> +                       val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
>                 break;
>         case POWER_SUPPLY_PROP_PRESENT:
>                 val->intval = acpi_battery_present(battery);
> @@ -1105,12 +1102,6 @@ battery_ac_is_broken_quirk(const struct dmi_system_id *d)
>         return 0;
>  }
>
> -static int __init battery_quirk_not_charging(const struct dmi_system_id *d)
> -{
> -       battery_quirk_notcharging = 1;
> -       return 0;
> -}
> -
>  static const struct dmi_system_id bat_dmi_table[] __initconst = {
>         {
>                 /* NEC LZ750/LS */
> @@ -1139,19 +1130,6 @@ static const struct dmi_system_id bat_dmi_table[] __initconst = {
>                         DMI_MATCH(DMI_BIOS_DATE, "08/22/2014"),
>                 },
>         },
> -       {
> -               /*
> -                * On Lenovo ThinkPads the BIOS specification defines
> -                * a state when the bits for charging and discharging
> -                * are both set to 0. That state is "Not Charging".
> -                */
> -               .callback = battery_quirk_not_charging,
> -               .ident = "Lenovo ThinkPad",
> -               .matches = {
> -                       DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
> -                       DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad"),
> -               },
> -       },
>         {
>                 /* Microsoft Surface Go 3 */
>                 .callback = battery_notification_delay_quirk,
> --

Applied as 5.19 material, thanks!