| Message ID | 20220404182938.29492-2-singh.kuldeep87k@gmail.com |
|---|---|
| State | Accepted |
| Commit | ae8f4223b15227ec054bdb8a6247ce5b54d6e48e |
| Headers | show |
| Series | [v2,1/4] dt-bindings: I2C: Add Qualcomm Geni based QUP I2C bindings | expand |
On 04/04/2022 20:29, Kuldeep Singh wrote: > GENI(generic interface) based Qualcomm Universal Peripheral controller > can support multiple serial interfaces like SPI,UART and I2C. > > Unlike other I2C controllers, QUP I2C bindings are present in parent > schema. Move it out from parent to an individual binding and let parent > refer to child schema later on. > > Please note, current schema isn't complete as it misses out few > properties and thus, add these missing properties along the process. > > Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com> > --- > v2: > - Change compatible from enum to const > - Drop clock-frequency description > - Sort nodes > --- > .../bindings/i2c/qcom,i2c-geni-qcom.yaml | 100 ++++++++++++++++++ > 1 file changed, 100 insertions(+) > create mode 100644 Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
On Mon, Apr 04, 2022 at 11:59:34PM +0530, Kuldeep Singh wrote: > GENI(generic interface) based Qualcomm Universal Peripheral controller > can support multiple serial interfaces like SPI,UART and I2C. > > Unlike other I2C controllers, QUP I2C bindings are present in parent > schema. Move it out from parent to an individual binding and let parent > refer to child schema later on. > > Please note, current schema isn't complete as it misses out few > properties and thus, add these missing properties along the process. > > Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com> > --- > v2: > - Change compatible from enum to const > - Drop clock-frequency description > - Sort nodes > --- Gentle ping to revive this thread. Patch 2,3,4 are accepted in this series and this one is only left. Bjorn, could you please help in picking this up if there are no further review comments. Thanks!
On Mon, 04 Apr 2022 23:59:34 +0530, Kuldeep Singh wrote: > GENI(generic interface) based Qualcomm Universal Peripheral controller > can support multiple serial interfaces like SPI,UART and I2C. > > Unlike other I2C controllers, QUP I2C bindings are present in parent > schema. Move it out from parent to an individual binding and let parent > refer to child schema later on. > > Please note, current schema isn't complete as it misses out few > properties and thus, add these missing properties along the process. > > Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com> > --- > v2: > - Change compatible from enum to const > - Drop clock-frequency description > - Sort nodes > --- > .../bindings/i2c/qcom,i2c-geni-qcom.yaml | 100 ++++++++++++++++++ > 1 file changed, 100 insertions(+) > create mode 100644 Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml > This series should have been applied all together, but as it seems it's already in multiple trees, I've applied. Rob
diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml new file mode 100644 index 000000000000..0e7ed00562e2 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/i2c/qcom,i2c-geni-qcom.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm Geni based QUP I2C Controller + +maintainers: + - Andy Gross <agross@kernel.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + const: qcom,geni-i2c + + clocks: + maxItems: 1 + + clock-names: + const: se + + clock-frequency: + default: 100000 + + dmas: + maxItems: 2 + + dma-names: + items: + - const: tx + - const: rx + + interconnects: + maxItems: 3 + + interconnect-names: + items: + - const: qup-core + - const: qup-config + - const: qup-memory + + interrupts: + maxItems: 1 + + pinctrl-0: true + pinctrl-1: true + + pinctrl-names: + minItems: 1 + items: + - const: default + - const: sleep + + power-domains: + maxItems: 1 + + reg: + maxItems: 1 + + required-opps: + maxItems: 1 + +required: + - compatible + - interrupts + - clocks + - clock-names + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,gcc-sc7180.h> + #include <dt-bindings/interconnect/qcom,sc7180.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + i2c@88000 { + compatible = "qcom,geni-i2c"; + reg = <0x00880000 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c0_default>; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + power-domains = <&rpmhpd SC7180_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + }; +...
GENI(generic interface) based Qualcomm Universal Peripheral controller can support multiple serial interfaces like SPI,UART and I2C. Unlike other I2C controllers, QUP I2C bindings are present in parent schema. Move it out from parent to an individual binding and let parent refer to child schema later on. Please note, current schema isn't complete as it misses out few properties and thus, add these missing properties along the process. Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com> --- v2: - Change compatible from enum to const - Drop clock-frequency description - Sort nodes --- .../bindings/i2c/qcom,i2c-geni-qcom.yaml | 100 ++++++++++++++++++ 1 file changed, 100 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml