mbox series

[v2,0/6] dmaengine/ARM: use proper 'dma-channels/requests' properties

Message ID 20220427161126.647073-1-krzysztof.kozlowski@linaro.org
Headers show
Series dmaengine/ARM: use proper 'dma-channels/requests' properties | expand

Message

Krzysztof Kozlowski April 27, 2022, 4:11 p.m. UTC
Hi,

The core DT schema defines generic 'dma-channels' and 'dma-requests'
properties, so in preparation to moving bindings to DT schema, convert
existing users of '#dma-channels' and '#dma-requests' to the generic
variant.

Not tested on hardware.

IMPORTANT
=========
The patchset is not bisectable! The DTS patches should be applied a
release *after* driver change is accepted.

Changes since v1
================
1. Add missing TI patches.

See also:
[1] https://lore.kernel.org/linux-devicetree/fedb56be-f275-aabb-cdf5-dbd394b8a7bd@linaro.org/T/#m6235f451045c337d70a62dc65eab9a716618550b

Best regards,
Krzysztof

Comments

Rob Herring (Arm) April 27, 2022, 6:20 p.m. UTC | #1
On Wed, 27 Apr 2022 18:11:21 +0200, Krzysztof Kozlowski wrote:
> The generic property, used in most of the drivers and defined in generic
> dma-common DT bindings, is 'dma-channels'.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  Documentation/devicetree/bindings/usb/am33xx-usb.txt | 7 ++++---
>  1 file changed, 4 insertions(+), 3 deletions(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>
Krzysztof Kozlowski April 27, 2022, 7:26 p.m. UTC | #2
On Wed, 27 Apr 2022 at 20:20, Rob Herring <robh@kernel.org> wrote:
> > diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
> > index f6ec85d58dd1..55ffb0813ded 100644
> > --- a/arch/arm/boot/dts/am33xx.dtsi
> > +++ b/arch/arm/boot/dts/am33xx.dtsi
> > @@ -461,8 +461,8 @@ cppi41dma: dma-controller@2000 {
> >                               interrupts = <17>;
> >                               interrupt-names = "glue";
> >                               #dma-cells = <2>;
> > -                             #dma-channels = <30>;
> > -                             #dma-requests = <256>;
> > +                             dma-channels = <30>;
> > +                             dma-requests = <256>;
>
> You could keep the old properties for compatibility and to apply
> immediately.

Indeed, that's a nice solution. Any preference from TI SoC maintainers?

Best regards,
Krzysztof
Krzysztof Kozlowski April 28, 2022, 7:33 a.m. UTC | #3
On 28/04/2022 09:30, Tony Lindgren wrote:
> * Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> [220427 19:23]:
>> On Wed, 27 Apr 2022 at 20:20, Rob Herring <robh@kernel.org> wrote:
>>>> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
>>>> index f6ec85d58dd1..55ffb0813ded 100644
>>>> --- a/arch/arm/boot/dts/am33xx.dtsi
>>>> +++ b/arch/arm/boot/dts/am33xx.dtsi
>>>> @@ -461,8 +461,8 @@ cppi41dma: dma-controller@2000 {
>>>>                               interrupts = <17>;
>>>>                               interrupt-names = "glue";
>>>>                               #dma-cells = <2>;
>>>> -                             #dma-channels = <30>;
>>>> -                             #dma-requests = <256>;
>>>> +                             dma-channels = <30>;
>>>> +                             dma-requests = <256>;
>>>
>>> You could keep the old properties for compatibility and to apply
>>> immediately.
>>
>> Indeed, that's a nice solution. Any preference from TI SoC maintainers?
> 
> Makes sense to me to avoid dependencies.

Thanks. I will send a v3 today with such change.


Best regards,
Krzysztof