| Message ID | 20220330100444.3846661-1-daniel.lezcano@linaro.org |
|---|---|
| Headers | show |
| Series | tools/thermal: thermal library and tools | expand |
Hi, if there is no comment for the series, shall I pick it so we can go forward ? On 30/03/2022 12:04, Daniel Lezcano wrote: > These changes are providing the following tools and library: > > - A thermal library doing the netlink abstraction from the kernel in > order to make the userspace thermal implementation easier. Having > the library integrated with the kernel tree is also a guarantee to > keep the message format and their encoding/decoding aligned > > - A thermal tools library providing a set of functions to deal with > usual features like the log, the mainloop and the time. This > library is used by the provided tools below > > - An data acquisition program to capture the temperature of the > different thermal zone during an amount of time or during the > execution of an application. The output is formated to be easily > parsed by gnuplot, a spreadsheet program or a statistical command > line utility. The timestamp is based on the system uptime, thus > giving an indication of when a thermal event happened, that can > help to spot or reproduce thermal issue in the long run > > - A thermal monitoring program based on the thermal library. It gives > a skeleton to build any logic on top of it and shows how to use the > thermal library. It does nothing except discovering the thermal > zones, their trip points and listening for events like cooling > devices state changes or trip point crossed > > Changelog: > > v1: Initial post after a RFC > > v2: > > - Fixed all trailing whitespaces and some other checkpatch > warnings. Some warnings remain but they can be considered as false > positive > > - Added in the thermometer tool: > - Usage/help option as well as a man page > - The ability to execute a program > - The capture duration > - Create the output directory if it does not exist > > - Add in the thermal-engine tool: > - A usage/help option > - A message telling the userspace it is waiting for events > - A daemonize option > > - Minor bug fixes here and there, as well as typos > > Daniel Lezcano (4): > tools/lib/thermal: Add a thermal library > tools/thermal: Add util library > tools/thermal: A temperature capture tool > tools/thermal: Add thermal daemon skeleton > > MAINTAINERS | 1 + > tools/Makefile | 36 +- > tools/lib/thermal/.gitignore | 2 + > tools/lib/thermal/Build | 5 + > tools/lib/thermal/Makefile | 165 ++++++ > tools/lib/thermal/commands.c | 349 +++++++++++ > tools/lib/thermal/events.c | 164 +++++ > tools/lib/thermal/include/thermal.h | 142 +++++ > tools/lib/thermal/libthermal.map | 25 + > tools/lib/thermal/libthermal.pc.template | 12 + > tools/lib/thermal/sampling.c | 75 +++ > tools/lib/thermal/thermal.c | 126 ++++ > tools/lib/thermal/thermal_nl.c | 215 +++++++ > tools/lib/thermal/thermal_nl.h | 46 ++ > tools/thermal/lib/Build | 3 + > tools/thermal/lib/Makefile | 158 +++++ > .../thermal/lib/libthermal_tools.pc.template | 12 + > tools/thermal/lib/log.c | 77 +++ > tools/thermal/lib/log.h | 31 + > tools/thermal/lib/mainloop.c | 120 ++++ > tools/thermal/lib/mainloop.h | 15 + > tools/thermal/lib/thermal-tools.h | 10 + > tools/thermal/lib/uptimeofday.c | 40 ++ > tools/thermal/lib/uptimeofday.h | 12 + > tools/thermal/thermal-engine/Build | 2 + > tools/thermal/thermal-engine/Makefile | 28 + > tools/thermal/thermal-engine/thermal-engine.c | 326 ++++++++++ > tools/thermal/thermometer/Build | 2 + > tools/thermal/thermometer/Makefile | 26 + > tools/thermal/thermometer/thermometer.8 | 93 +++ > tools/thermal/thermometer/thermometer.c | 558 ++++++++++++++++++ > tools/thermal/thermometer/thermometer.conf | 5 + > 32 files changed, 2878 insertions(+), 3 deletions(-) > create mode 100644 tools/lib/thermal/.gitignore > create mode 100644 tools/lib/thermal/Build > create mode 100644 tools/lib/thermal/Makefile > create mode 100644 tools/lib/thermal/commands.c > create mode 100644 tools/lib/thermal/events.c > create mode 100644 tools/lib/thermal/include/thermal.h > create mode 100644 tools/lib/thermal/libthermal.map > create mode 100644 tools/lib/thermal/libthermal.pc.template > create mode 100644 tools/lib/thermal/sampling.c > create mode 100644 tools/lib/thermal/thermal.c > create mode 100644 tools/lib/thermal/thermal_nl.c > create mode 100644 tools/lib/thermal/thermal_nl.h > create mode 100644 tools/thermal/lib/Build > create mode 100644 tools/thermal/lib/Makefile > create mode 100644 tools/thermal/lib/libthermal_tools.pc.template > create mode 100644 tools/thermal/lib/log.c > create mode 100644 tools/thermal/lib/log.h > create mode 100644 tools/thermal/lib/mainloop.c > create mode 100644 tools/thermal/lib/mainloop.h > create mode 100644 tools/thermal/lib/thermal-tools.h > create mode 100644 tools/thermal/lib/uptimeofday.c > create mode 100644 tools/thermal/lib/uptimeofday.h > create mode 100644 tools/thermal/thermal-engine/Build > create mode 100644 tools/thermal/thermal-engine/Makefile > create mode 100644 tools/thermal/thermal-engine/thermal-engine.c > create mode 100644 tools/thermal/thermometer/Build > create mode 100644 tools/thermal/thermometer/Makefile > create mode 100644 tools/thermal/thermometer/thermometer.8 > create mode 100644 tools/thermal/thermometer/thermometer.c > create mode 100644 tools/thermal/thermometer/thermometer.conf >
Hi Daniel, On Wed, 2022-04-06 at 10:00 +0200, Daniel Lezcano wrote: > > Hi, > > if there is no comment for the series, shall I pick it so we can go > forward ? Didn't get time to check yet. It will still be for the next merge window, correct? Thanks, Srinivas > > > > On 30/03/2022 12:04, Daniel Lezcano wrote: > > These changes are providing the following tools and library: > > > > - A thermal library doing the netlink abstraction from the kernel > > in > > order to make the userspace thermal implementation easier. > > Having > > the library integrated with the kernel tree is also a guarantee > > to > > keep the message format and their encoding/decoding aligned > > > > > > > > > > > > - A thermal tools library providing a set of functions to deal > > with > > usual features like the log, the mainloop and the time. This > > library is used by the provided tools below > > > > - An data acquisition program to capture the temperature of the > > different thermal zone during an amount of time or during the > > execution of an application. The output is formated to be > > easily > > parsed by gnuplot, a spreadsheet program or a statistical > > command > > line utility. The timestamp is based on the system uptime, thus > > giving an indication of when a thermal event happened, that can > > help to spot or reproduce thermal issue in the long run > > > > - A thermal monitoring program based on the thermal library. It > > gives > > a skeleton to build any logic on top of it and shows how to use > > the > > thermal library. It does nothing except discovering the thermal > > zones, their trip points and listening for events like cooling > > devices state changes or trip point crossed > > > > Changelog: > > > > v1: Initial post after a RFC > > > > v2: > > > > - Fixed all trailing whitespaces and some other checkpatch > > warnings. Some warnings remain but they can be considered as > > false > > positive > > > > - Added in the thermometer tool: > > - Usage/help option as well as a man page > > - The ability to execute a program > > - The capture duration > > - Create the output directory if it does not exist > > > > - Add in the thermal-engine tool: > > - A usage/help option > > - A message telling the userspace it is waiting for events > > - A daemonize option > > > > - Minor bug fixes here and there, as well as typos > > > > Daniel Lezcano (4): > > tools/lib/thermal: Add a thermal library > > tools/thermal: Add util library > > tools/thermal: A temperature capture tool > > tools/thermal: Add thermal daemon skeleton > > > > MAINTAINERS | 1 + > > tools/Makefile | 36 +- > > tools/lib/thermal/.gitignore | 2 + > > tools/lib/thermal/Build | 5 + > > tools/lib/thermal/Makefile | 165 ++++++ > > tools/lib/thermal/commands.c | 349 +++++++++++ > > tools/lib/thermal/events.c | 164 +++++ > > tools/lib/thermal/include/thermal.h | 142 +++++ > > tools/lib/thermal/libthermal.map | 25 + > > tools/lib/thermal/libthermal.pc.template | 12 + > > tools/lib/thermal/sampling.c | 75 +++ > > tools/lib/thermal/thermal.c | 126 ++++ > > tools/lib/thermal/thermal_nl.c | 215 +++++++ > > tools/lib/thermal/thermal_nl.h | 46 ++ > > tools/thermal/lib/Build | 3 + > > tools/thermal/lib/Makefile | 158 +++++ > > .../thermal/lib/libthermal_tools.pc.template | 12 + > > tools/thermal/lib/log.c | 77 +++ > > tools/thermal/lib/log.h | 31 + > > tools/thermal/lib/mainloop.c | 120 ++++ > > tools/thermal/lib/mainloop.h | 15 + > > tools/thermal/lib/thermal-tools.h | 10 + > > tools/thermal/lib/uptimeofday.c | 40 ++ > > tools/thermal/lib/uptimeofday.h | 12 + > > tools/thermal/thermal-engine/Build | 2 + > > tools/thermal/thermal-engine/Makefile | 28 + > > tools/thermal/thermal-engine/thermal-engine.c | 326 ++++++++++ > > tools/thermal/thermometer/Build | 2 + > > tools/thermal/thermometer/Makefile | 26 + > > tools/thermal/thermometer/thermometer.8 | 93 +++ > > tools/thermal/thermometer/thermometer.c | 558 > > ++++++++++++++++++ > > tools/thermal/thermometer/thermometer.conf | 5 + > > 32 files changed, 2878 insertions(+), 3 deletions(-) > > create mode 100644 tools/lib/thermal/.gitignore > > create mode 100644 tools/lib/thermal/Build > > create mode 100644 tools/lib/thermal/Makefile > > create mode 100644 tools/lib/thermal/commands.c > > create mode 100644 tools/lib/thermal/events.c > > create mode 100644 tools/lib/thermal/include/thermal.h > > create mode 100644 tools/lib/thermal/libthermal.map > > create mode 100644 tools/lib/thermal/libthermal.pc.template > > create mode 100644 tools/lib/thermal/sampling.c > > create mode 100644 tools/lib/thermal/thermal.c > > create mode 100644 tools/lib/thermal/thermal_nl.c > > create mode 100644 tools/lib/thermal/thermal_nl.h > > create mode 100644 tools/thermal/lib/Build > > create mode 100644 tools/thermal/lib/Makefile > > create mode 100644 tools/thermal/lib/libthermal_tools.pc.template > > create mode 100644 tools/thermal/lib/log.c > > create mode 100644 tools/thermal/lib/log.h > > create mode 100644 tools/thermal/lib/mainloop.c > > create mode 100644 tools/thermal/lib/mainloop.h > > create mode 100644 tools/thermal/lib/thermal-tools.h > > create mode 100644 tools/thermal/lib/uptimeofday.c > > create mode 100644 tools/thermal/lib/uptimeofday.h > > create mode 100644 tools/thermal/thermal-engine/Build > > create mode 100644 tools/thermal/thermal-engine/Makefile > > create mode 100644 tools/thermal/thermal-engine/thermal-engine.c > > create mode 100644 tools/thermal/thermometer/Build > > create mode 100644 tools/thermal/thermometer/Makefile > > create mode 100644 tools/thermal/thermometer/thermometer.8 > > create mode 100644 tools/thermal/thermometer/thermometer.c > > create mode 100644 tools/thermal/thermometer/thermometer.conf > > > >
On 06/04/2022 16:28, srinivas pandruvada wrote: > Hi Daniel, > > On Wed, 2022-04-06 at 10:00 +0200, Daniel Lezcano wrote: >> >> Hi, >> >> if there is no comment for the series, shall I pick it so we can go >> forward ? > Didn't get time to check yet. It will still be for the next merge > window, correct? Right, but I would like to continue adding more features, scripts and tests. Iteratively. >> >> On 30/03/2022 12:04, Daniel Lezcano wrote: >>> These changes are providing the following tools and library: >>> >>> - A thermal library doing the netlink abstraction from the kernel >>> in >>> order to make the userspace thermal implementation easier. >>> Having >>> the library integrated with the kernel tree is also a guarantee >>> to >>> keep the message format and their encoding/decoding aligned >>> >>> >>> >>> >>> >>> - A thermal tools library providing a set of functions to deal >>> with >>> usual features like the log, the mainloop and the time. This >>> library is used by the provided tools below >>> >>> - An data acquisition program to capture the temperature of the >>> different thermal zone during an amount of time or during the >>> execution of an application. The output is formated to be >>> easily >>> parsed by gnuplot, a spreadsheet program or a statistical >>> command >>> line utility. The timestamp is based on the system uptime, thus >>> giving an indication of when a thermal event happened, that can >>> help to spot or reproduce thermal issue in the long run >>> >>> - A thermal monitoring program based on the thermal library. It >>> gives >>> a skeleton to build any logic on top of it and shows how to use >>> the >>> thermal library. It does nothing except discovering the thermal >>> zones, their trip points and listening for events like cooling >>> devices state changes or trip point crossed >>> >>> Changelog: >>> >>> v1: Initial post after a RFC >>> >>> v2: >>> >>> - Fixed all trailing whitespaces and some other checkpatch >>> warnings. Some warnings remain but they can be considered as >>> false >>> positive >>> >>> - Added in the thermometer tool: >>> - Usage/help option as well as a man page >>> - The ability to execute a program >>> - The capture duration >>> - Create the output directory if it does not exist >>> >>> - Add in the thermal-engine tool: >>> - A usage/help option >>> - A message telling the userspace it is waiting for events >>> - A daemonize option >>> >>> - Minor bug fixes here and there, as well as typos >>> >>> Daniel Lezcano (4): >>> tools/lib/thermal: Add a thermal library >>> tools/thermal: Add util library >>> tools/thermal: A temperature capture tool >>> tools/thermal: Add thermal daemon skeleton >>> >>> MAINTAINERS | 1 + >>> tools/Makefile | 36 +- >>> tools/lib/thermal/.gitignore | 2 + >>> tools/lib/thermal/Build | 5 + >>> tools/lib/thermal/Makefile | 165 ++++++ >>> tools/lib/thermal/commands.c | 349 +++++++++++ >>> tools/lib/thermal/events.c | 164 +++++ >>> tools/lib/thermal/include/thermal.h | 142 +++++ >>> tools/lib/thermal/libthermal.map | 25 + >>> tools/lib/thermal/libthermal.pc.template | 12 + >>> tools/lib/thermal/sampling.c | 75 +++ >>> tools/lib/thermal/thermal.c | 126 ++++ >>> tools/lib/thermal/thermal_nl.c | 215 +++++++ >>> tools/lib/thermal/thermal_nl.h | 46 ++ >>> tools/thermal/lib/Build | 3 + >>> tools/thermal/lib/Makefile | 158 +++++ >>> .../thermal/lib/libthermal_tools.pc.template | 12 + >>> tools/thermal/lib/log.c | 77 +++ >>> tools/thermal/lib/log.h | 31 + >>> tools/thermal/lib/mainloop.c | 120 ++++ >>> tools/thermal/lib/mainloop.h | 15 + >>> tools/thermal/lib/thermal-tools.h | 10 + >>> tools/thermal/lib/uptimeofday.c | 40 ++ >>> tools/thermal/lib/uptimeofday.h | 12 + >>> tools/thermal/thermal-engine/Build | 2 + >>> tools/thermal/thermal-engine/Makefile | 28 + >>> tools/thermal/thermal-engine/thermal-engine.c | 326 ++++++++++ >>> tools/thermal/thermometer/Build | 2 + >>> tools/thermal/thermometer/Makefile | 26 + >>> tools/thermal/thermometer/thermometer.8 | 93 +++ >>> tools/thermal/thermometer/thermometer.c | 558 >>> ++++++++++++++++++ >>> tools/thermal/thermometer/thermometer.conf | 5 + >>> 32 files changed, 2878 insertions(+), 3 deletions(-) >>> create mode 100644 tools/lib/thermal/.gitignore >>> create mode 100644 tools/lib/thermal/Build >>> create mode 100644 tools/lib/thermal/Makefile >>> create mode 100644 tools/lib/thermal/commands.c >>> create mode 100644 tools/lib/thermal/events.c >>> create mode 100644 tools/lib/thermal/include/thermal.h >>> create mode 100644 tools/lib/thermal/libthermal.map >>> create mode 100644 tools/lib/thermal/libthermal.pc.template >>> create mode 100644 tools/lib/thermal/sampling.c >>> create mode 100644 tools/lib/thermal/thermal.c >>> create mode 100644 tools/lib/thermal/thermal_nl.c >>> create mode 100644 tools/lib/thermal/thermal_nl.h >>> create mode 100644 tools/thermal/lib/Build >>> create mode 100644 tools/thermal/lib/Makefile >>> create mode 100644 tools/thermal/lib/libthermal_tools.pc.template >>> create mode 100644 tools/thermal/lib/log.c >>> create mode 100644 tools/thermal/lib/log.h >>> create mode 100644 tools/thermal/lib/mainloop.c >>> create mode 100644 tools/thermal/lib/mainloop.h >>> create mode 100644 tools/thermal/lib/thermal-tools.h >>> create mode 100644 tools/thermal/lib/uptimeofday.c >>> create mode 100644 tools/thermal/lib/uptimeofday.h >>> create mode 100644 tools/thermal/thermal-engine/Build >>> create mode 100644 tools/thermal/thermal-engine/Makefile >>> create mode 100644 tools/thermal/thermal-engine/thermal-engine.c >>> create mode 100644 tools/thermal/thermometer/Build >>> create mode 100644 tools/thermal/thermometer/Makefile >>> create mode 100644 tools/thermal/thermometer/thermometer.8 >>> create mode 100644 tools/thermal/thermometer/thermometer.c >>> create mode 100644 tools/thermal/thermometer/thermometer.conf >>> >> >> > >
On Wed, Apr 6, 2022 at 4:44 PM Daniel Lezcano <daniel.lezcano@linaro.org> wrote: > > On 06/04/2022 16:28, srinivas pandruvada wrote: > > Hi Daniel, > > > > On Wed, 2022-04-06 at 10:00 +0200, Daniel Lezcano wrote: > >> > >> Hi, > >> > >> if there is no comment for the series, shall I pick it so we can go > >> forward ? > > Didn't get time to check yet. It will still be for the next merge > > window, correct? > > Right, but I would like to continue adding more features, scripts and > tests. Iteratively. Srinivas, if you can give this a go, please, it will help. Otherwise, I think that all of your comments so far have been addressed, or have I missed anything? > > >> > >> On 30/03/2022 12:04, Daniel Lezcano wrote: > >>> These changes are providing the following tools and library: > >>> > >>> - A thermal library doing the netlink abstraction from the kernel > >>> in > >>> order to make the userspace thermal implementation easier. > >>> Having > >>> the library integrated with the kernel tree is also a guarantee > >>> to > >>> keep the message format and their encoding/decoding aligned > >>> > >>> > >>> > >>> > >>> > >>> - A thermal tools library providing a set of functions to deal > >>> with > >>> usual features like the log, the mainloop and the time. This > >>> library is used by the provided tools below > >>> > >>> - An data acquisition program to capture the temperature of the > >>> different thermal zone during an amount of time or during the > >>> execution of an application. The output is formated to be > >>> easily > >>> parsed by gnuplot, a spreadsheet program or a statistical > >>> command > >>> line utility. The timestamp is based on the system uptime, thus > >>> giving an indication of when a thermal event happened, that can > >>> help to spot or reproduce thermal issue in the long run > >>> > >>> - A thermal monitoring program based on the thermal library. It > >>> gives > >>> a skeleton to build any logic on top of it and shows how to use > >>> the > >>> thermal library. It does nothing except discovering the thermal > >>> zones, their trip points and listening for events like cooling > >>> devices state changes or trip point crossed > >>> > >>> Changelog: > >>> > >>> v1: Initial post after a RFC > >>> > >>> v2: > >>> > >>> - Fixed all trailing whitespaces and some other checkpatch > >>> warnings. Some warnings remain but they can be considered as > >>> false > >>> positive > >>> > >>> - Added in the thermometer tool: > >>> - Usage/help option as well as a man page > >>> - The ability to execute a program > >>> - The capture duration > >>> - Create the output directory if it does not exist > >>> > >>> - Add in the thermal-engine tool: > >>> - A usage/help option > >>> - A message telling the userspace it is waiting for events > >>> - A daemonize option > >>> > >>> - Minor bug fixes here and there, as well as typos > >>> > >>> Daniel Lezcano (4): > >>> tools/lib/thermal: Add a thermal library > >>> tools/thermal: Add util library > >>> tools/thermal: A temperature capture tool > >>> tools/thermal: Add thermal daemon skeleton > >>> > >>> MAINTAINERS | 1 + > >>> tools/Makefile | 36 +- > >>> tools/lib/thermal/.gitignore | 2 + > >>> tools/lib/thermal/Build | 5 + > >>> tools/lib/thermal/Makefile | 165 ++++++ > >>> tools/lib/thermal/commands.c | 349 +++++++++++ > >>> tools/lib/thermal/events.c | 164 +++++ > >>> tools/lib/thermal/include/thermal.h | 142 +++++ > >>> tools/lib/thermal/libthermal.map | 25 + > >>> tools/lib/thermal/libthermal.pc.template | 12 + > >>> tools/lib/thermal/sampling.c | 75 +++ > >>> tools/lib/thermal/thermal.c | 126 ++++ > >>> tools/lib/thermal/thermal_nl.c | 215 +++++++ > >>> tools/lib/thermal/thermal_nl.h | 46 ++ > >>> tools/thermal/lib/Build | 3 + > >>> tools/thermal/lib/Makefile | 158 +++++ > >>> .../thermal/lib/libthermal_tools.pc.template | 12 + > >>> tools/thermal/lib/log.c | 77 +++ > >>> tools/thermal/lib/log.h | 31 + > >>> tools/thermal/lib/mainloop.c | 120 ++++ > >>> tools/thermal/lib/mainloop.h | 15 + > >>> tools/thermal/lib/thermal-tools.h | 10 + > >>> tools/thermal/lib/uptimeofday.c | 40 ++ > >>> tools/thermal/lib/uptimeofday.h | 12 + > >>> tools/thermal/thermal-engine/Build | 2 + > >>> tools/thermal/thermal-engine/Makefile | 28 + > >>> tools/thermal/thermal-engine/thermal-engine.c | 326 ++++++++++ > >>> tools/thermal/thermometer/Build | 2 + > >>> tools/thermal/thermometer/Makefile | 26 + > >>> tools/thermal/thermometer/thermometer.8 | 93 +++ > >>> tools/thermal/thermometer/thermometer.c | 558 > >>> ++++++++++++++++++ > >>> tools/thermal/thermometer/thermometer.conf | 5 + > >>> 32 files changed, 2878 insertions(+), 3 deletions(-) > >>> create mode 100644 tools/lib/thermal/.gitignore > >>> create mode 100644 tools/lib/thermal/Build > >>> create mode 100644 tools/lib/thermal/Makefile > >>> create mode 100644 tools/lib/thermal/commands.c > >>> create mode 100644 tools/lib/thermal/events.c > >>> create mode 100644 tools/lib/thermal/include/thermal.h > >>> create mode 100644 tools/lib/thermal/libthermal.map > >>> create mode 100644 tools/lib/thermal/libthermal.pc.template > >>> create mode 100644 tools/lib/thermal/sampling.c > >>> create mode 100644 tools/lib/thermal/thermal.c > >>> create mode 100644 tools/lib/thermal/thermal_nl.c > >>> create mode 100644 tools/lib/thermal/thermal_nl.h > >>> create mode 100644 tools/thermal/lib/Build > >>> create mode 100644 tools/thermal/lib/Makefile > >>> create mode 100644 tools/thermal/lib/libthermal_tools.pc.template > >>> create mode 100644 tools/thermal/lib/log.c > >>> create mode 100644 tools/thermal/lib/log.h > >>> create mode 100644 tools/thermal/lib/mainloop.c > >>> create mode 100644 tools/thermal/lib/mainloop.h > >>> create mode 100644 tools/thermal/lib/thermal-tools.h > >>> create mode 100644 tools/thermal/lib/uptimeofday.c > >>> create mode 100644 tools/thermal/lib/uptimeofday.h > >>> create mode 100644 tools/thermal/thermal-engine/Build > >>> create mode 100644 tools/thermal/thermal-engine/Makefile > >>> create mode 100644 tools/thermal/thermal-engine/thermal-engine.c > >>> create mode 100644 tools/thermal/thermometer/Build > >>> create mode 100644 tools/thermal/thermometer/Makefile > >>> create mode 100644 tools/thermal/thermometer/thermometer.8 > >>> create mode 100644 tools/thermal/thermometer/thermometer.c > >>> create mode 100644 tools/thermal/thermometer/thermometer.conf > >>> > >> > >> > > > > > > > -- > <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs > > Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | > <http://twitter.com/#!/linaroorg> Twitter | > <http://www.linaro.org/linaro-blog/> Blog
On Wed, 2022-04-13 at 17:06 +0200, Rafael J. Wysocki wrote: > On Wed, Apr 6, 2022 at 4:44 PM Daniel Lezcano < > daniel.lezcano@linaro.org> wrote: > > > > On 06/04/2022 16:28, srinivas pandruvada wrote: > > > Hi Daniel, > > > > > > On Wed, 2022-04-06 at 10:00 +0200, Daniel Lezcano wrote: > > > > > > > > Hi, > > > > > > > > if there is no comment for the series, shall I pick it so we > > > > can go > > > > forward ? > > > Didn't get time to check yet. It will still be for the next merge > > > window, correct? > > > > Right, but I would like to continue adding more features, scripts > > and > > tests. Iteratively. > > Srinivas, if you can give this a go, please, it will help. > > Otherwise, I think that all of your comments so far have been > addressed, or have I missed anything? > I will provide by the end of this week. Thanks, Srinivas > > > > > > > > > > On 30/03/2022 12:04, Daniel Lezcano wrote: > > > > > These changes are providing the following tools and library: > > > > > > > > > > - A thermal library doing the netlink abstraction from the > > > > > kernel > > > > > in > > > > > order to make the userspace thermal implementation > > > > > easier. > > > > > Having > > > > > the library integrated with the kernel tree is also a > > > > > guarantee > > > > > to > > > > > keep the message format and their encoding/decoding > > > > > aligned > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > - A thermal tools library providing a set of functions to > > > > > deal > > > > > with > > > > > usual features like the log, the mainloop and the time. > > > > > This > > > > > library is used by the provided tools below > > > > > > > > > > - An data acquisition program to capture the temperature > > > > > of the > > > > > different thermal zone during an amount of time or > > > > > during the > > > > > execution of an application. The output is formated to > > > > > be > > > > > easily > > > > > parsed by gnuplot, a spreadsheet program or a > > > > > statistical > > > > > command > > > > > line utility. The timestamp is based on the system > > > > > uptime, thus > > > > > giving an indication of when a thermal event happened, > > > > > that can > > > > > help to spot or reproduce thermal issue in the long run > > > > > > > > > > - A thermal monitoring program based on the thermal > > > > > library. It > > > > > gives > > > > > a skeleton to build any logic on top of it and shows how > > > > > to use > > > > > the > > > > > thermal library. It does nothing except discovering the > > > > > thermal > > > > > zones, their trip points and listening for events like > > > > > cooling > > > > > devices state changes or trip point crossed > > > > > > > > > > Changelog: > > > > > > > > > > v1: Initial post after a RFC > > > > > > > > > > v2: > > > > > > > > > > - Fixed all trailing whitespaces and some other > > > > > checkpatch > > > > > warnings. Some warnings remain but they can be > > > > > considered as > > > > > false > > > > > positive > > > > > > > > > > - Added in the thermometer tool: > > > > > - Usage/help option as well as a man page > > > > > - The ability to execute a program > > > > > - The capture duration > > > > > - Create the output directory if it does not exist > > > > > > > > > > - Add in the thermal-engine tool: > > > > > - A usage/help option > > > > > - A message telling the userspace it is waiting for > > > > > events > > > > > - A daemonize option > > > > > > > > > > - Minor bug fixes here and there, as well as typos > > > > > > > > > > Daniel Lezcano (4): > > > > > tools/lib/thermal: Add a thermal library > > > > > tools/thermal: Add util library > > > > > tools/thermal: A temperature capture tool > > > > > tools/thermal: Add thermal daemon skeleton > > > > > > > > > > MAINTAINERS | 1 + > > > > > tools/Makefile | 36 +- > > > > > tools/lib/thermal/.gitignore | 2 + > > > > > tools/lib/thermal/Build | 5 + > > > > > tools/lib/thermal/Makefile | 165 ++++++ > > > > > tools/lib/thermal/commands.c | 349 > > > > > +++++++++++ > > > > > tools/lib/thermal/events.c | 164 +++++ > > > > > tools/lib/thermal/include/thermal.h | 142 +++++ > > > > > tools/lib/thermal/libthermal.map | 25 + > > > > > tools/lib/thermal/libthermal.pc.template | 12 + > > > > > tools/lib/thermal/sampling.c | 75 +++ > > > > > tools/lib/thermal/thermal.c | 126 ++++ > > > > > tools/lib/thermal/thermal_nl.c | 215 > > > > > +++++++ > > > > > tools/lib/thermal/thermal_nl.h | 46 ++ > > > > > tools/thermal/lib/Build | 3 + > > > > > tools/thermal/lib/Makefile | 158 +++++ > > > > > .../thermal/lib/libthermal_tools.pc.template | 12 + > > > > > tools/thermal/lib/log.c | 77 +++ > > > > > tools/thermal/lib/log.h | 31 + > > > > > tools/thermal/lib/mainloop.c | 120 ++++ > > > > > tools/thermal/lib/mainloop.h | 15 + > > > > > tools/thermal/lib/thermal-tools.h | 10 + > > > > > tools/thermal/lib/uptimeofday.c | 40 ++ > > > > > tools/thermal/lib/uptimeofday.h | 12 + > > > > > tools/thermal/thermal-engine/Build | 2 + > > > > > tools/thermal/thermal-engine/Makefile | 28 + > > > > > tools/thermal/thermal-engine/thermal-engine.c | 326 > > > > > ++++++++++ > > > > > tools/thermal/thermometer/Build | 2 + > > > > > tools/thermal/thermometer/Makefile | 26 + > > > > > tools/thermal/thermometer/thermometer.8 | 93 +++ > > > > > tools/thermal/thermometer/thermometer.c | 558 > > > > > ++++++++++++++++++ > > > > > tools/thermal/thermometer/thermometer.conf | 5 + > > > > > 32 files changed, 2878 insertions(+), 3 deletions(-) > > > > > create mode 100644 tools/lib/thermal/.gitignore > > > > > create mode 100644 tools/lib/thermal/Build > > > > > create mode 100644 tools/lib/thermal/Makefile > > > > > create mode 100644 tools/lib/thermal/commands.c > > > > > create mode 100644 tools/lib/thermal/events.c > > > > > create mode 100644 tools/lib/thermal/include/thermal.h > > > > > create mode 100644 tools/lib/thermal/libthermal.map > > > > > create mode 100644 > > > > > tools/lib/thermal/libthermal.pc.template > > > > > create mode 100644 tools/lib/thermal/sampling.c > > > > > create mode 100644 tools/lib/thermal/thermal.c > > > > > create mode 100644 tools/lib/thermal/thermal_nl.c > > > > > create mode 100644 tools/lib/thermal/thermal_nl.h > > > > > create mode 100644 tools/thermal/lib/Build > > > > > create mode 100644 tools/thermal/lib/Makefile > > > > > create mode 100644 > > > > > tools/thermal/lib/libthermal_tools.pc.template > > > > > create mode 100644 tools/thermal/lib/log.c > > > > > create mode 100644 tools/thermal/lib/log.h > > > > > create mode 100644 tools/thermal/lib/mainloop.c > > > > > create mode 100644 tools/thermal/lib/mainloop.h > > > > > create mode 100644 tools/thermal/lib/thermal-tools.h > > > > > create mode 100644 tools/thermal/lib/uptimeofday.c > > > > > create mode 100644 tools/thermal/lib/uptimeofday.h > > > > > create mode 100644 tools/thermal/thermal-engine/Build > > > > > create mode 100644 tools/thermal/thermal-engine/Makefile > > > > > create mode 100644 tools/thermal/thermal-engine/thermal- > > > > > engine.c > > > > > create mode 100644 tools/thermal/thermometer/Build > > > > > create mode 100644 tools/thermal/thermometer/Makefile > > > > > create mode 100644 tools/thermal/thermometer/thermometer.8 > > > > > create mode 100644 tools/thermal/thermometer/thermometer.c > > > > > create mode 100644 > > > > > tools/thermal/thermometer/thermometer.conf > > > > > > > > > > > > > > > > > > > > > > > > > -- > > <http://www.linaro.org/> Linaro.org │ Open source software for ARM > > SoCs > > > > Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | > > <http://twitter.com/#!/linaroorg> Twitter | > > <http://www.linaro.org/linaro-blog/> Blog
On Wed, 2022-04-13 at 10:21 -0700, srinivas pandruvada wrote: > On Wed, 2022-04-13 at 17:06 +0200, Rafael J. Wysocki wrote: > > On Wed, Apr 6, 2022 at 4:44 PM Daniel Lezcano < > > daniel.lezcano@linaro.org> wrote: > > > > > > On 06/04/2022 16:28, srinivas pandruvada wrote: > > > > Hi Daniel, > > > > > > > > On Wed, 2022-04-06 at 10:00 +0200, Daniel Lezcano wrote: > > > > > > > > > > Hi, > > > > > > > > > > if there is no comment for the series, shall I pick it so we > > > > > can go > > > > > forward ? > > > > Didn't get time to check yet. It will still be for the next merge > > > > window, correct? > > > > > > Right, but I would like to continue adding more features, scripts > > > and > > > tests. Iteratively. > > > > Srinivas, if you can give this a go, please, it will help. > > > > Otherwise, I think that all of your comments so far have been > > addressed, or have I missed anything? > > > I will provide by the end of this week. 1. Some warnings in applying patch Applying: tools/lib/thermal: Add a thermal library Applying: tools/thermal: Add util library Applying: tools/thermal: A temperature capture tool .git/rebase-apply/patch:795: space before tab in indent. polling = 100; } .git/rebase-apply/patch:90: new blank line at EOF. + .git/rebase-apply/patch:221: new blank line at EOF. + warning: 3 lines add whitespace errors. Applying: tools/thermal: Add thermal daemon skeleton .git/rebase-apply/patch:86: new blank line at EOF. + warning: 1 line adds whitespace errors. 2. Thermometer is fine 3. segfault for thermal-engine LD_LIBRARY_PATH=../lib:../../lib/thermal:$LD_LIBRARY_pATH ./thermal- engine Segmentation fault (core dumped) root@srinivas-otcpl-icl-u:~/development/linux/tools/thermal/thermal- engine# LD_LIBRARY_PATH=../lib:../../lib/thermal:$LD_LIBRARY_pATH ./thermal-engine --help thermal-engine : A thermal monitoring engine based on notifications Usage: thermal-engine [options] -h, --help this help -d, --daemonize capture duration -l <level>, --loglevel <level> log level: DEBUG, INFO, NOTICE, WARN, ERROR -s, --syslog output to syslog root@srinivas-otcpl-icl-u:~/development/linux/tools/thermal/thermal- engine# LD_LIBRARY_PATH=../lib:../../lib/thermal:$LD_LIBRARY_pATH ./thermal-engine -l DEBUG Segmentation fault (core dumped) root@srinivas-otcpl-icl-u:~/development/linux/tools/thermal/thermal- engine# LD_LIBRARY_PATH=../lib:../../lib/thermal:$LD_LIBRARY_pATH ./thermal-engine --loglevel DEBUG Segmentation fault (core dumped) root@srinivas-otcpl-icl-u:~/development/linux/tools/thermal/thermal- engine# LD_LIBRARY_PATH=../lib:../../lib/thermal:$LD_LIBRARY_pATH ./thermal-engine -s Segmentation fault (core dumped) Thanks, Srinivas > > Thanks, > Srinivas > > > > > > > > > > > > > > > On 30/03/2022 12:04, Daniel Lezcano wrote: > > > > > > These changes are providing the following tools and library: > > > > > > > > > > > > - A thermal library doing the netlink abstraction from the > > > > > > kernel > > > > > > in > > > > > > order to make the userspace thermal implementation > > > > > > easier. > > > > > > Having > > > > > > the library integrated with the kernel tree is also a > > > > > > guarantee > > > > > > to > > > > > > keep the message format and their encoding/decoding > > > > > > aligned > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > - A thermal tools library providing a set of functions to > > > > > > deal > > > > > > with > > > > > > usual features like the log, the mainloop and the time. > > > > > > This > > > > > > library is used by the provided tools below > > > > > > > > > > > > - An data acquisition program to capture the temperature > > > > > > of the > > > > > > different thermal zone during an amount of time or > > > > > > during the > > > > > > execution of an application. The output is formated to > > > > > > be > > > > > > easily > > > > > > parsed by gnuplot, a spreadsheet program or a > > > > > > statistical > > > > > > command > > > > > > line utility. The timestamp is based on the system > > > > > > uptime, thus > > > > > > giving an indication of when a thermal event happened, > > > > > > that can > > > > > > help to spot or reproduce thermal issue in the long run > > > > > > > > > > > > - A thermal monitoring program based on the thermal > > > > > > library. It > > > > > > gives > > > > > > a skeleton to build any logic on top of it and shows how > > > > > > to use > > > > > > the > > > > > > thermal library. It does nothing except discovering the > > > > > > thermal > > > > > > zones, their trip points and listening for events like > > > > > > cooling > > > > > > devices state changes or trip point crossed > > > > > > > > > > > > Changelog: > > > > > > > > > > > > v1: Initial post after a RFC > > > > > > > > > > > > v2: > > > > > > > > > > > > - Fixed all trailing whitespaces and some other > > > > > > checkpatch > > > > > > warnings. Some warnings remain but they can be > > > > > > considered as > > > > > > false > > > > > > positive > > > > > > > > > > > > - Added in the thermometer tool: > > > > > > - Usage/help option as well as a man page > > > > > > - The ability to execute a program > > > > > > - The capture duration > > > > > > - Create the output directory if it does not exist > > > > > > > > > > > > - Add in the thermal-engine tool: > > > > > > - A usage/help option > > > > > > - A message telling the userspace it is waiting for > > > > > > events > > > > > > - A daemonize option > > > > > > > > > > > > - Minor bug fixes here and there, as well as typos > > > > > > > > > > > > Daniel Lezcano (4): > > > > > > tools/lib/thermal: Add a thermal library > > > > > > tools/thermal: Add util library > > > > > > tools/thermal: A temperature capture tool > > > > > > tools/thermal: Add thermal daemon skeleton > > > > > > > > > > > > MAINTAINERS | 1 + > > > > > > tools/Makefile | 36 +- > > > > > > tools/lib/thermal/.gitignore | 2 + > > > > > > tools/lib/thermal/Build | 5 + > > > > > > tools/lib/thermal/Makefile | 165 ++++++ > > > > > > tools/lib/thermal/commands.c | 349 > > > > > > +++++++++++ > > > > > > tools/lib/thermal/events.c | 164 +++++ > > > > > > tools/lib/thermal/include/thermal.h | 142 +++++ > > > > > > tools/lib/thermal/libthermal.map | 25 + > > > > > > tools/lib/thermal/libthermal.pc.template | 12 + > > > > > > tools/lib/thermal/sampling.c | 75 +++ > > > > > > tools/lib/thermal/thermal.c | 126 ++++ > > > > > > tools/lib/thermal/thermal_nl.c | 215 > > > > > > +++++++ > > > > > > tools/lib/thermal/thermal_nl.h | 46 ++ > > > > > > tools/thermal/lib/Build | 3 + > > > > > > tools/thermal/lib/Makefile | 158 +++++ > > > > > > .../thermal/lib/libthermal_tools.pc.template | 12 + > > > > > > tools/thermal/lib/log.c | 77 +++ > > > > > > tools/thermal/lib/log.h | 31 + > > > > > > tools/thermal/lib/mainloop.c | 120 ++++ > > > > > > tools/thermal/lib/mainloop.h | 15 + > > > > > > tools/thermal/lib/thermal-tools.h | 10 + > > > > > > tools/thermal/lib/uptimeofday.c | 40 ++ > > > > > > tools/thermal/lib/uptimeofday.h | 12 + > > > > > > tools/thermal/thermal-engine/Build | 2 + > > > > > > tools/thermal/thermal-engine/Makefile | 28 + > > > > > > tools/thermal/thermal-engine/thermal-engine.c | 326 > > > > > > ++++++++++ > > > > > > tools/thermal/thermometer/Build | 2 + > > > > > > tools/thermal/thermometer/Makefile | 26 + > > > > > > tools/thermal/thermometer/thermometer.8 | 93 +++ > > > > > > tools/thermal/thermometer/thermometer.c | 558 > > > > > > ++++++++++++++++++ > > > > > > tools/thermal/thermometer/thermometer.conf | 5 + > > > > > > 32 files changed, 2878 insertions(+), 3 deletions(-) > > > > > > create mode 100644 tools/lib/thermal/.gitignore > > > > > > create mode 100644 tools/lib/thermal/Build > > > > > > create mode 100644 tools/lib/thermal/Makefile > > > > > > create mode 100644 tools/lib/thermal/commands.c > > > > > > create mode 100644 tools/lib/thermal/events.c > > > > > > create mode 100644 tools/lib/thermal/include/thermal.h > > > > > > create mode 100644 tools/lib/thermal/libthermal.map > > > > > > create mode 100644 > > > > > > tools/lib/thermal/libthermal.pc.template > > > > > > create mode 100644 tools/lib/thermal/sampling.c > > > > > > create mode 100644 tools/lib/thermal/thermal.c > > > > > > create mode 100644 tools/lib/thermal/thermal_nl.c > > > > > > create mode 100644 tools/lib/thermal/thermal_nl.h > > > > > > create mode 100644 tools/thermal/lib/Build > > > > > > create mode 100644 tools/thermal/lib/Makefile > > > > > > create mode 100644 > > > > > > tools/thermal/lib/libthermal_tools.pc.template > > > > > > create mode 100644 tools/thermal/lib/log.c > > > > > > create mode 100644 tools/thermal/lib/log.h > > > > > > create mode 100644 tools/thermal/lib/mainloop.c > > > > > > create mode 100644 tools/thermal/lib/mainloop.h > > > > > > create mode 100644 tools/thermal/lib/thermal-tools.h > > > > > > create mode 100644 tools/thermal/lib/uptimeofday.c > > > > > > create mode 100644 tools/thermal/lib/uptimeofday.h > > > > > > create mode 100644 tools/thermal/thermal-engine/Build > > > > > > create mode 100644 tools/thermal/thermal-engine/Makefile > > > > > > create mode 100644 tools/thermal/thermal-engine/thermal- > > > > > > engine.c > > > > > > create mode 100644 tools/thermal/thermometer/Build > > > > > > create mode 100644 tools/thermal/thermometer/Makefile > > > > > > create mode 100644 tools/thermal/thermometer/thermometer.8 > > > > > > create mode 100644 tools/thermal/thermometer/thermometer.c > > > > > > create mode 100644 > > > > > > tools/thermal/thermometer/thermometer.conf > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > <http://www.linaro.org/> Linaro.org │ Open source software for ARM > > > SoCs > > > > > > Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | > > > <http://twitter.com/#!/linaroorg> Twitter | > > > <http://www.linaro.org/linaro-blog/> Blog > >
Hi Srinivas, On 16/04/2022 05:50, srinivas pandruvada wrote: > On Wed, 2022-04-13 at 10:21 -0700, srinivas pandruvada wrote: >> On Wed, 2022-04-13 at 17:06 +0200, Rafael J. Wysocki wrote: >>> On Wed, Apr 6, 2022 at 4:44 PM Daniel Lezcano < >>> daniel.lezcano@linaro.org> wrote: >>>> >>>> On 06/04/2022 16:28, srinivas pandruvada wrote: >>>>> Hi Daniel, >>>>> >>>>> On Wed, 2022-04-06 at 10:00 +0200, Daniel Lezcano wrote: >>>>>> >>>>>> Hi, >>>>>> >>>>>> if there is no comment for the series, shall I pick it so we >>>>>> can go >>>>>> forward ? >>>>> Didn't get time to check yet. It will still be for the next merge >>>>> window, correct? >>>> >>>> Right, but I would like to continue adding more features, scripts >>>> and >>>> tests. Iteratively. >>> >>> Srinivas, if you can give this a go, please, it will help. >>> >>> Otherwise, I think that all of your comments so far have been >>> addressed, or have I missed anything? >>> >> I will provide by the end of this week. > > 1. Some warnings in applying patch > > Applying: tools/lib/thermal: Add a thermal library > Applying: tools/thermal: Add util library > Applying: tools/thermal: A temperature capture tool > .git/rebase-apply/patch:795: space before tab in indent. > polling = 100; } > .git/rebase-apply/patch:90: new blank line at EOF. > + > .git/rebase-apply/patch:221: new blank line at EOF. > + > warning: 3 lines add whitespace errors. > Applying: tools/thermal: Add thermal daemon skeleton > .git/rebase-apply/patch:86: new blank line at EOF. > + > warning: 1 line adds whitespace errors. Strange, I did not have those but I'll try to reproduce > 2. Thermometer is fine > > 3. segfault for thermal-engine > > LD_LIBRARY_PATH=../lib:../../lib/thermal:$LD_LIBRARY_pATH ./thermal- > engine > Segmentation fault (core dumped) > root@srinivas-otcpl-icl-u:~/development/linux/tools/thermal/thermal- > engine# LD_LIBRARY_PATH=../lib:../../lib/thermal:$LD_LIBRARY_pATH > ./thermal-engine --help > thermal-engine : A thermal monitoring engine based on notifications > Usage: thermal-engine [options] > -h, --help this help > -d, --daemonize capture duration > -l <level>, --loglevel <level> log level: DEBUG, INFO, > NOTICE, WARN, ERROR > -s, --syslog output to syslog > > root@srinivas-otcpl-icl-u:~/development/linux/tools/thermal/thermal- > engine# LD_LIBRARY_PATH=../lib:../../lib/thermal:$LD_LIBRARY_pATH > ./thermal-engine -l DEBUG > Segmentation fault (core dumped) > root@srinivas-otcpl-icl-u:~/development/linux/tools/thermal/thermal- > engine# LD_LIBRARY_PATH=../lib:../../lib/thermal:$LD_LIBRARY_pATH > ./thermal-engine --loglevel DEBUG > Segmentation fault (core dumped) > root@srinivas-otcpl-icl-u:~/development/linux/tools/thermal/thermal- > engine# LD_LIBRARY_PATH=../lib:../../lib/thermal:$LD_LIBRARY_pATH > ./thermal-engine -s > Segmentation fault (core dumped) Is CONFIG_THERMAL_NETLINK set ?
Hi Daniel, On Sat, 2022-04-16 at 09:55 +0200, Daniel Lezcano wrote: > > Hi Srinivas, > > > On 16/04/2022 05:50, srinivas pandruvada wrote: > > On Wed, 2022-04-13 at 10:21 -0700, srinivas pandruvada wrote: > > > On Wed, 2022-04-13 at 17:06 +0200, Rafael J. Wysocki wrote: > > > > On Wed, Apr 6, 2022 at 4:44 PM Daniel Lezcano < > > > > daniel.lezcano@linaro.org> wrote: > > > > > > > [...] > > root@srinivas-otcpl-icl-u:~/development/linux/tools/thermal/thermal- > > engine# LD_LIBRARY_PATH=../lib:../../lib/thermal:$LD_LIBRARY_pATH > > ./thermal-engine -l DEBUG > > Segmentation fault (core dumped) > > root@srinivas-otcpl-icl-u:~/development/linux/tools/thermal/thermal- > > engine# LD_LIBRARY_PATH=../lib:../../lib/thermal:$LD_LIBRARY_pATH > > ./thermal-engine --loglevel DEBUG > > Segmentation fault (core dumped) > > root@srinivas-otcpl-icl-u:~/development/linux/tools/thermal/thermal- > > engine# LD_LIBRARY_PATH=../lib:../../lib/thermal:$LD_LIBRARY_pATH > > ./thermal-engine -s > > Segmentation fault (core dumped) > > Is CONFIG_THERMAL_NETLINK set ? Yes, Thermometer program works fine. Just thermal-engine fails. CONFIG_THERMAL=y CONFIG_THERMAL_NETLINK=y CONFIG_THERMAL_STATISTICS=y CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 CONFIG_THERMAL_HWMON=y CONFIG_THERMAL_WRITABLE_TRIPS=y CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y # CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set # CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set CONFIG_THERMAL_GOV_FAIR_SHARE=y CONFIG_THERMAL_GOV_STEP_WISE=y CONFIG_THERMAL_GOV_BANG_BANG=y CONFIG_THERMAL_GOV_USER_SPACE=y CONFIG_DEVFREQ_THERMAL=y CONFIG_THERMAL_EMULATION=y This may help #gdb ./thermal-engine GNU gdb (Ubuntu 8.1.1-0ubuntu1) 8.1.1 Copyright (C) 2018 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-linux-gnu". Type "show configuration" for configuration details. For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>. Find the GDB manual and other documentation resources online at: <http://www.gnu.org/software/gdb/documentation/>. For help, type "help". Type "apropos word" to search for commands related to "word"... Reading symbols from ./thermal-engine...(no debugging symbols found)...done. (gdb) run Starting program: /home/labuser/development/linux/tools/thermal/thermal-engine/thermal- engine [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux- gnu/libthread_db.so.1". Program received signal SIGSEGV, Segmentation fault. 0x00007ffff7402036 in parse_tz_get_trip (info=0x7fffffffdf60, tz=0x555555607898) at commands.c:143 143 __tt[size].id = -1; (gdb) backtrace #0 0x00007ffff7402036 in parse_tz_get_trip (info=0x7fffffffdf60, tz=0x555555607898) at commands.c:143 #1 0x00007ffff7402233 in handle_netlink (unused=0x0, cmd=0x7ffff76052f8 <thermal_cmds+120>, info=0x7fffffffdf60, arg=0x555555607898) at commands.c:206 #2 0x00007ffff7003435 in ?? () from /lib/x86_64-linux-gnu/libnl-genl- 3.so.200 #3 0x00007ffff6810c1c in nl_recvmsgs_report () from /lib/x86_64-linux- gnu/libnl-3.so.200 #4 0x00007ffff6811049 in nl_recvmsgs () from /lib/x86_64-linux- gnu/libnl-3.so.200 #5 0x00007ffff7402eaf in nl_send_msg (sock=0x555555606040, cb=0x5555556065d0, msg=0x555555606110, rx_handler=0x7ffff70036f0 <genl_handle_msg>, data=0x555555607898) at thermal_nl.c:70 #6 0x00007ffff7402327 in thermal_genl_auto (th=0x5555556048a0, id=1, cmd=2, flags=0, arg=0x555555607898) at commands.c:282 #7 0x00007ffff74023e0 in thermal_cmd_get_trip (th=0x5555556048a0, tz=0x555555607898) at commands.c:304 #8 0x00007ffff74039db in __thermal_zone_discover (tz=0x555555607898, th=0x5555556048a0) at thermal.c:71 #9 0x00007ffff7403842 in for_each_thermal_zone (tz=0x555555607860, cb=0x7ffff74039b8 <__thermal_zone_discover>, arg=0x5555556048a0) at thermal.c:33 #10 0x00007ffff7403a5b in thermal_zone_discover (th=0x5555556048a0) at thermal.c:87 #11 0x00005555554019bd in main () Thanks, Srinivas >
Hi Srinivas, thanks for the information. I've indeed not tested on x86_64 but on ARM64. I'll give a try to reproduce and fix the issue. Thanks again for taking the time to run it -- Daniel On 17/04/2022 06:23, srinivas pandruvada wrote: > Hi Daniel, > > On Sat, 2022-04-16 at 09:55 +0200, Daniel Lezcano wrote: >> >> Hi Srinivas, >> >> >> On 16/04/2022 05:50, srinivas pandruvada wrote: >>> On Wed, 2022-04-13 at 10:21 -0700, srinivas pandruvada wrote: >>>> On Wed, 2022-04-13 at 17:06 +0200, Rafael J. Wysocki wrote: >>>>> On Wed, Apr 6, 2022 at 4:44 PM Daniel Lezcano < >>>>> daniel.lezcano@linaro.org> wrote: >>>>>> >>> > > [...] > >>> root@srinivas-otcpl-icl-u:~/development/linux/tools/thermal/thermal- >>> engine# LD_LIBRARY_PATH=../lib:../../lib/thermal:$LD_LIBRARY_pATH >>> ./thermal-engine -l DEBUG >>> Segmentation fault (core dumped) >>> root@srinivas-otcpl-icl-u:~/development/linux/tools/thermal/thermal- >>> engine# LD_LIBRARY_PATH=../lib:../../lib/thermal:$LD_LIBRARY_pATH >>> ./thermal-engine --loglevel DEBUG >>> Segmentation fault (core dumped) >>> root@srinivas-otcpl-icl-u:~/development/linux/tools/thermal/thermal- >>> engine# LD_LIBRARY_PATH=../lib:../../lib/thermal:$LD_LIBRARY_pATH >>> ./thermal-engine -s >>> Segmentation fault (core dumped) >> >> Is CONFIG_THERMAL_NETLINK set ? > > Yes, Thermometer program works fine. Just thermal-engine fails. > CONFIG_THERMAL=y > CONFIG_THERMAL_NETLINK=y > CONFIG_THERMAL_STATISTICS=y > CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 > CONFIG_THERMAL_HWMON=y > CONFIG_THERMAL_WRITABLE_TRIPS=y > CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y > # CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set > # CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set > CONFIG_THERMAL_GOV_FAIR_SHARE=y > CONFIG_THERMAL_GOV_STEP_WISE=y > CONFIG_THERMAL_GOV_BANG_BANG=y > CONFIG_THERMAL_GOV_USER_SPACE=y > CONFIG_DEVFREQ_THERMAL=y > CONFIG_THERMAL_EMULATION=y > > This may help > > #gdb ./thermal-engine > GNU gdb (Ubuntu 8.1.1-0ubuntu1) 8.1.1 > Copyright (C) 2018 Free Software Foundation, Inc. > License GPLv3+: GNU GPL version 3 or later > <http://gnu.org/licenses/gpl.html> > This is free software: you are free to change and redistribute it. > There is NO WARRANTY, to the extent permitted by law. Type "show > copying" > and "show warranty" for details. > This GDB was configured as "x86_64-linux-gnu". > Type "show configuration" for configuration details. > For bug reporting instructions, please see: > <http://www.gnu.org/software/gdb/bugs/>. > Find the GDB manual and other documentation resources online at: > <http://www.gnu.org/software/gdb/documentation/>. > For help, type "help". > Type "apropos word" to search for commands related to "word"... > Reading symbols from ./thermal-engine...(no debugging symbols > found)...done. > (gdb) run > Starting program: > /home/labuser/development/linux/tools/thermal/thermal-engine/thermal- > engine > [Thread debugging using libthread_db enabled] > Using host libthread_db library "/lib/x86_64-linux- > gnu/libthread_db.so.1". > > Program received signal SIGSEGV, Segmentation fault. > 0x00007ffff7402036 in parse_tz_get_trip (info=0x7fffffffdf60, > tz=0x555555607898) at commands.c:143 > 143 __tt[size].id = -1; > (gdb) backtrace > #0 0x00007ffff7402036 in parse_tz_get_trip (info=0x7fffffffdf60, > tz=0x555555607898) at commands.c:143 > #1 0x00007ffff7402233 in handle_netlink (unused=0x0, > cmd=0x7ffff76052f8 <thermal_cmds+120>, info=0x7fffffffdf60, > arg=0x555555607898) at commands.c:206 > #2 0x00007ffff7003435 in ?? () from /lib/x86_64-linux-gnu/libnl-genl- > 3.so.200 > #3 0x00007ffff6810c1c in nl_recvmsgs_report () from /lib/x86_64-linux- > gnu/libnl-3.so.200 > #4 0x00007ffff6811049 in nl_recvmsgs () from /lib/x86_64-linux- > gnu/libnl-3.so.200 > #5 0x00007ffff7402eaf in nl_send_msg (sock=0x555555606040, > cb=0x5555556065d0, msg=0x555555606110, rx_handler=0x7ffff70036f0 > <genl_handle_msg>, data=0x555555607898) at thermal_nl.c:70 > #6 0x00007ffff7402327 in thermal_genl_auto (th=0x5555556048a0, id=1, > cmd=2, flags=0, arg=0x555555607898) at commands.c:282 > #7 0x00007ffff74023e0 in thermal_cmd_get_trip (th=0x5555556048a0, > tz=0x555555607898) at commands.c:304 > #8 0x00007ffff74039db in __thermal_zone_discover (tz=0x555555607898, > th=0x5555556048a0) at thermal.c:71 > #9 0x00007ffff7403842 in for_each_thermal_zone (tz=0x555555607860, > cb=0x7ffff74039b8 <__thermal_zone_discover>, arg=0x5555556048a0) at > thermal.c:33 > #10 0x00007ffff7403a5b in thermal_zone_discover (th=0x5555556048a0) at > thermal.c:87 > #11 0x00005555554019bd in main () > > Thanks, > Srinivas > >> > >
Hi Daniel, The attached diff fixes the crash, Also when you run in daemon mode, you need to use some pid lock file. Otherwise it launches multiple daemons. Thanks, Srinivas On Sun, 2022-04-17 at 10:20 +0200, Daniel Lezcano wrote: > > Hi Srinivas, > > thanks for the information. I've indeed not tested on x86_64 but on > ARM64. > > I'll give a try to reproduce and fix the issue. > > Thanks again for taking the time to run it > > -- Daniel > > On 17/04/2022 06:23, srinivas pandruvada wrote: > > Hi Daniel, > > > > On Sat, 2022-04-16 at 09:55 +0200, Daniel Lezcano wrote: > > > > > > Hi Srinivas, > > > > > > > > > On 16/04/2022 05:50, srinivas pandruvada wrote: > > > > On Wed, 2022-04-13 at 10:21 -0700, srinivas pandruvada wrote: > > > > > On Wed, 2022-04-13 at 17:06 +0200, Rafael J. Wysocki wrote: > > > > > > On Wed, Apr 6, 2022 at 4:44 PM Daniel Lezcano < > > > > > > daniel.lezcano@linaro.org> wrote: > > > > > > > > > > > > > > > [...] > > > > > > root@srinivas-otcpl-icl-u:~/development/linux/tools/thermal/the > > > > rmal- > > > > engine# > > > > LD_LIBRARY_PATH=../lib:../../lib/thermal:$LD_LIBRARY_pATH > > > > ./thermal-engine -l DEBUG > > > > Segmentation fault (core dumped) > > > > root@srinivas-otcpl-icl-u:~/development/linux/tools/thermal/the > > > > rmal- > > > > engine# > > > > LD_LIBRARY_PATH=../lib:../../lib/thermal:$LD_LIBRARY_pATH > > > > ./thermal-engine --loglevel DEBUG > > > > Segmentation fault (core dumped) > > > > root@srinivas-otcpl-icl-u:~/development/linux/tools/thermal/the > > > > rmal- > > > > engine# > > > > LD_LIBRARY_PATH=../lib:../../lib/thermal:$LD_LIBRARY_pATH > > > > ./thermal-engine -s > > > > Segmentation fault (core dumped) > > > > > > Is CONFIG_THERMAL_NETLINK set ? > > > > Yes, Thermometer program works fine. Just thermal-engine fails. > > CONFIG_THERMAL=y > > CONFIG_THERMAL_NETLINK=y > > CONFIG_THERMAL_STATISTICS=y > > CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 > > CONFIG_THERMAL_HWMON=y > > CONFIG_THERMAL_WRITABLE_TRIPS=y > > CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y > > # CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set > > # CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set > > CONFIG_THERMAL_GOV_FAIR_SHARE=y > > CONFIG_THERMAL_GOV_STEP_WISE=y > > CONFIG_THERMAL_GOV_BANG_BANG=y > > CONFIG_THERMAL_GOV_USER_SPACE=y > > CONFIG_DEVFREQ_THERMAL=y > > CONFIG_THERMAL_EMULATION=y > > > > This may help > > > > #gdb ./thermal-engine > > GNU gdb (Ubuntu 8.1.1-0ubuntu1) 8.1.1 > > Copyright (C) 2018 Free Software Foundation, Inc. > > License GPLv3+: GNU GPL version 3 or later > > <http://gnu.org/licenses/gpl.html> > > This is free software: you are free to change and redistribute it. > > There is NO WARRANTY, to the extent permitted by law. Type "show > > copying" > > and "show warranty" for details. > > This GDB was configured as "x86_64-linux-gnu". > > Type "show configuration" for configuration details. > > For bug reporting instructions, please see: > > <http://www.gnu.org/software/gdb/bugs/>. > > Find the GDB manual and other documentation resources online at: > > <http://www.gnu.org/software/gdb/documentation/>. > > For help, type "help". > > Type "apropos word" to search for commands related to "word"... > > Reading symbols from ./thermal-engine...(no debugging symbols > > found)...done. > > (gdb) run > > Starting program: > > /home/labuser/development/linux/tools/thermal/thermal- > > engine/thermal- > > engine > > [Thread debugging using libthread_db enabled] > > Using host libthread_db library "/lib/x86_64-linux- > > gnu/libthread_db.so.1". > > > > Program received signal SIGSEGV, Segmentation fault. > > 0x00007ffff7402036 in parse_tz_get_trip (info=0x7fffffffdf60, > > tz=0x555555607898) at commands.c:143 > > 143 __tt[size].id = -1; > > (gdb) backtrace > > #0 0x00007ffff7402036 in parse_tz_get_trip (info=0x7fffffffdf60, > > tz=0x555555607898) at commands.c:143 > > #1 0x00007ffff7402233 in handle_netlink (unused=0x0, > > cmd=0x7ffff76052f8 <thermal_cmds+120>, info=0x7fffffffdf60, > > arg=0x555555607898) at commands.c:206 > > #2 0x00007ffff7003435 in ?? () from /lib/x86_64-linux-gnu/libnl- > > genl- > > 3.so.200 > > #3 0x00007ffff6810c1c in nl_recvmsgs_report () from /lib/x86_64- > > linux- > > gnu/libnl-3.so.200 > > #4 0x00007ffff6811049 in nl_recvmsgs () from /lib/x86_64-linux- > > gnu/libnl-3.so.200 > > #5 0x00007ffff7402eaf in nl_send_msg (sock=0x555555606040, > > cb=0x5555556065d0, msg=0x555555606110, rx_handler=0x7ffff70036f0 > > <genl_handle_msg>, data=0x555555607898) at thermal_nl.c:70 > > #6 0x00007ffff7402327 in thermal_genl_auto (th=0x5555556048a0, > > id=1, > > cmd=2, flags=0, arg=0x555555607898) at commands.c:282 > > #7 0x00007ffff74023e0 in thermal_cmd_get_trip (th=0x5555556048a0, > > tz=0x555555607898) at commands.c:304 > > #8 0x00007ffff74039db in __thermal_zone_discover > > (tz=0x555555607898, > > th=0x5555556048a0) at thermal.c:71 > > #9 0x00007ffff7403842 in for_each_thermal_zone (tz=0x555555607860, > > cb=0x7ffff74039b8 <__thermal_zone_discover>, arg=0x5555556048a0) at > > thermal.c:33 > > #10 0x00007ffff7403a5b in thermal_zone_discover (th=0x5555556048a0) > > at > > thermal.c:87 > > #11 0x00005555554019bd in main () > > > > Thanks, > > Srinivas > > > > > > > > > > >
On Sun, 2022-04-17 at 20:36 -0700, srinivas pandruvada wrote: > Hi Daniel, > > The attached diff fixes the crash, > > Also when you run in daemon mode, you need to use some pid lock file. > Otherwise it launches multiple daemons. > With the diff ./thermal-engine thermal zone 'acpitz', id=0 trip id=0, type=3, temp=119000, hyst=0 trip id=1, type=0, temp=71000, hyst=0 trip id=2, type=0, temp=55000, hyst=0 trip id=3, type=0, temp=50000, hyst=0 trip id=4, type=0, temp=45000, hyst=0 trip id=5, type=0, temp=40000, hyst=0 temperature: 25000 governor: 'step_wise' thermal zone 'INT3400 Thermal', id=1 temperature: 20000 governor: 'user_space' thermal zone 'B0D4', id=2 trip id=0, type=3, temp=110050, hyst=0 trip id=1, type=2, temp=110050, hyst=0 trip id=2, type=1, temp=110050, hyst=0 trip id=3, type=0, temp=90050, hyst=0 trip id=4, type=0, temp=85050, hyst=0 trip id=5, type=0, temp=80050, hyst=0 trip id=6, type=0, temp=75050, hyst=0 trip id=7, type=0, temp=70050, hyst=0 temperature: 26050 governor: 'user_space' thermal zone 'x86_pkg_temp', id=3 trip id=0, type=1, temp=-274000, hyst=0 trip id=1, type=1, temp=-274000, hyst=0 temperature: 26000 governor: 'step_wise' Waiting for thermal events ... > Thanks, > Srinivas > > > > On Sun, 2022-04-17 at 10:20 +0200, Daniel Lezcano wrote: > > > > Hi Srinivas, > > > > thanks for the information. I've indeed not tested on x86_64 but on > > ARM64. > > > > I'll give a try to reproduce and fix the issue. > > > > Thanks again for taking the time to run it > > > > -- Daniel > > > > On 17/04/2022 06:23, srinivas pandruvada wrote: > > > Hi Daniel, > > > > > > On Sat, 2022-04-16 at 09:55 +0200, Daniel Lezcano wrote: > > > > > > > > Hi Srinivas, > > > > > > > > > > > > On 16/04/2022 05:50, srinivas pandruvada wrote: > > > > > On Wed, 2022-04-13 at 10:21 -0700, srinivas pandruvada wrote: > > > > > > On Wed, 2022-04-13 at 17:06 +0200, Rafael J. Wysocki wrote: > > > > > > > On Wed, Apr 6, 2022 at 4:44 PM Daniel Lezcano < > > > > > > > daniel.lezcano@linaro.org> wrote: > > > > > > > > > > > > > > > > > > > [...] > > > > > > > > root@srinivas-otcpl-icl-u:~/development/linux/tools/thermal/the > > > > > rmal- > > > > > engine# > > > > > LD_LIBRARY_PATH=../lib:../../lib/thermal:$LD_LIBRARY_pATH > > > > > ./thermal-engine -l DEBUG > > > > > Segmentation fault (core dumped) > > > > > root@srinivas-otcpl-icl-u:~/development/linux/tools/thermal/the > > > > > rmal- > > > > > engine# > > > > > LD_LIBRARY_PATH=../lib:../../lib/thermal:$LD_LIBRARY_pATH > > > > > ./thermal-engine --loglevel DEBUG > > > > > Segmentation fault (core dumped) > > > > > root@srinivas-otcpl-icl-u:~/development/linux/tools/thermal/the > > > > > rmal- > > > > > engine# > > > > > LD_LIBRARY_PATH=../lib:../../lib/thermal:$LD_LIBRARY_pATH > > > > > ./thermal-engine -s > > > > > Segmentation fault (core dumped) > > > > > > > > Is CONFIG_THERMAL_NETLINK set ? > > > > > > Yes, Thermometer program works fine. Just thermal-engine fails. > > > CONFIG_THERMAL=y > > > CONFIG_THERMAL_NETLINK=y > > > CONFIG_THERMAL_STATISTICS=y > > > CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 > > > CONFIG_THERMAL_HWMON=y > > > CONFIG_THERMAL_WRITABLE_TRIPS=y > > > CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y > > > # CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set > > > # CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set > > > CONFIG_THERMAL_GOV_FAIR_SHARE=y > > > CONFIG_THERMAL_GOV_STEP_WISE=y > > > CONFIG_THERMAL_GOV_BANG_BANG=y > > > CONFIG_THERMAL_GOV_USER_SPACE=y > > > CONFIG_DEVFREQ_THERMAL=y > > > CONFIG_THERMAL_EMULATION=y > > > > > > This may help > > > > > > #gdb ./thermal-engine > > > GNU gdb (Ubuntu 8.1.1-0ubuntu1) 8.1.1 > > > Copyright (C) 2018 Free Software Foundation, Inc. > > > License GPLv3+: GNU GPL version 3 or later > > > <http://gnu.org/licenses/gpl.html> > > > This is free software: you are free to change and redistribute it. > > > There is NO WARRANTY, to the extent permitted by law. Type "show > > > copying" > > > and "show warranty" for details. > > > This GDB was configured as "x86_64-linux-gnu". > > > Type "show configuration" for configuration details. > > > For bug reporting instructions, please see: > > > <http://www.gnu.org/software/gdb/bugs/>. > > > Find the GDB manual and other documentation resources online at: > > > <http://www.gnu.org/software/gdb/documentation/>. > > > For help, type "help". > > > Type "apropos word" to search for commands related to "word"... > > > Reading symbols from ./thermal-engine...(no debugging symbols > > > found)...done. > > > (gdb) run > > > Starting program: > > > /home/labuser/development/linux/tools/thermal/thermal- > > > engine/thermal- > > > engine > > > [Thread debugging using libthread_db enabled] > > > Using host libthread_db library "/lib/x86_64-linux- > > > gnu/libthread_db.so.1". > > > > > > Program received signal SIGSEGV, Segmentation fault. > > > 0x00007ffff7402036 in parse_tz_get_trip (info=0x7fffffffdf60, > > > tz=0x555555607898) at commands.c:143 > > > 143 __tt[size].id = -1; > > > (gdb) backtrace > > > #0 0x00007ffff7402036 in parse_tz_get_trip (info=0x7fffffffdf60, > > > tz=0x555555607898) at commands.c:143 > > > #1 0x00007ffff7402233 in handle_netlink (unused=0x0, > > > cmd=0x7ffff76052f8 <thermal_cmds+120>, info=0x7fffffffdf60, > > > arg=0x555555607898) at commands.c:206 > > > #2 0x00007ffff7003435 in ?? () from /lib/x86_64-linux-gnu/libnl- > > > genl- > > > 3.so.200 > > > #3 0x00007ffff6810c1c in nl_recvmsgs_report () from /lib/x86_64- > > > linux- > > > gnu/libnl-3.so.200 > > > #4 0x00007ffff6811049 in nl_recvmsgs () from /lib/x86_64-linux- > > > gnu/libnl-3.so.200 > > > #5 0x00007ffff7402eaf in nl_send_msg (sock=0x555555606040, > > > cb=0x5555556065d0, msg=0x555555606110, rx_handler=0x7ffff70036f0 > > > <genl_handle_msg>, data=0x555555607898) at thermal_nl.c:70 > > > #6 0x00007ffff7402327 in thermal_genl_auto (th=0x5555556048a0, > > > id=1, > > > cmd=2, flags=0, arg=0x555555607898) at commands.c:282 > > > #7 0x00007ffff74023e0 in thermal_cmd_get_trip (th=0x5555556048a0, > > > tz=0x555555607898) at commands.c:304 > > > #8 0x00007ffff74039db in __thermal_zone_discover > > > (tz=0x555555607898, > > > th=0x5555556048a0) at thermal.c:71 > > > #9 0x00007ffff7403842 in for_each_thermal_zone (tz=0x555555607860, > > > cb=0x7ffff74039b8 <__thermal_zone_discover>, arg=0x5555556048a0) at > > > thermal.c:33 > > > #10 0x00007ffff7403a5b in thermal_zone_discover (th=0x5555556048a0) > > > at > > > thermal.c:87 > > > #11 0x00005555554019bd in main () > > > > > > Thanks, > > > Srinivas > > > > > > > > > > > > > > > > > >
Hi Srinivas, thanks for the fix ! On 18/04/2022 05:36, srinivas pandruvada wrote: > Hi Daniel, > > The attached diff fixes the crash, > > Also when you run in daemon mode, you need to use some pid lock file. > Otherwise it launches multiple daemons. Thanks for the feedback, I'll add it -- Daniel > > On Sun, 2022-04-17 at 10:20 +0200, Daniel Lezcano wrote: >> >> Hi Srinivas, >> >> thanks for the information. I've indeed not tested on x86_64 but on >> ARM64. >> >> I'll give a try to reproduce and fix the issue. >> >> Thanks again for taking the time to run it >> >> -- Daniel >> >> On 17/04/2022 06:23, srinivas pandruvada wrote: >>> Hi Daniel, >>> >>> On Sat, 2022-04-16 at 09:55 +0200, Daniel Lezcano wrote: >>>> >>>> Hi Srinivas, >>>> >>>> >>>> On 16/04/2022 05:50, srinivas pandruvada wrote: >>>>> On Wed, 2022-04-13 at 10:21 -0700, srinivas pandruvada wrote: >>>>>> On Wed, 2022-04-13 at 17:06 +0200, Rafael J. Wysocki wrote: >>>>>>> On Wed, Apr 6, 2022 at 4:44 PM Daniel Lezcano < >>>>>>> daniel.lezcano@linaro.org> wrote: >>>>>>>> >>>>> >>> >>> [...] >>> >>>>> root@srinivas-otcpl-icl-u:~/development/linux/tools/thermal/the >>>>> rmal- >>>>> engine# >>>>> LD_LIBRARY_PATH=../lib:../../lib/thermal:$LD_LIBRARY_pATH >>>>> ./thermal-engine -l DEBUG >>>>> Segmentation fault (core dumped) >>>>> root@srinivas-otcpl-icl-u:~/development/linux/tools/thermal/the >>>>> rmal- >>>>> engine# >>>>> LD_LIBRARY_PATH=../lib:../../lib/thermal:$LD_LIBRARY_pATH >>>>> ./thermal-engine --loglevel DEBUG >>>>> Segmentation fault (core dumped) >>>>> root@srinivas-otcpl-icl-u:~/development/linux/tools/thermal/the >>>>> rmal- >>>>> engine# >>>>> LD_LIBRARY_PATH=../lib:../../lib/thermal:$LD_LIBRARY_pATH >>>>> ./thermal-engine -s >>>>> Segmentation fault (core dumped) >>>> >>>> Is CONFIG_THERMAL_NETLINK set ? >>> >>> Yes, Thermometer program works fine. Just thermal-engine fails. >>> CONFIG_THERMAL=y >>> CONFIG_THERMAL_NETLINK=y >>> CONFIG_THERMAL_STATISTICS=y >>> CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 >>> CONFIG_THERMAL_HWMON=y >>> CONFIG_THERMAL_WRITABLE_TRIPS=y >>> CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y >>> # CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set >>> # CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set >>> CONFIG_THERMAL_GOV_FAIR_SHARE=y >>> CONFIG_THERMAL_GOV_STEP_WISE=y >>> CONFIG_THERMAL_GOV_BANG_BANG=y >>> CONFIG_THERMAL_GOV_USER_SPACE=y >>> CONFIG_DEVFREQ_THERMAL=y >>> CONFIG_THERMAL_EMULATION=y >>> >>> This may help >>> >>> #gdb ./thermal-engine >>> GNU gdb (Ubuntu 8.1.1-0ubuntu1) 8.1.1 >>> Copyright (C) 2018 Free Software Foundation, Inc. >>> License GPLv3+: GNU GPL version 3 or later >>> <http://gnu.org/licenses/gpl.html> >>> This is free software: you are free to change and redistribute it. >>> There is NO WARRANTY, to the extent permitted by law. Type "show >>> copying" >>> and "show warranty" for details. >>> This GDB was configured as "x86_64-linux-gnu". >>> Type "show configuration" for configuration details. >>> For bug reporting instructions, please see: >>> <http://www.gnu.org/software/gdb/bugs/>. >>> Find the GDB manual and other documentation resources online at: >>> <http://www.gnu.org/software/gdb/documentation/>. >>> For help, type "help". >>> Type "apropos word" to search for commands related to "word"... >>> Reading symbols from ./thermal-engine...(no debugging symbols >>> found)...done. >>> (gdb) run >>> Starting program: >>> /home/labuser/development/linux/tools/thermal/thermal- >>> engine/thermal- >>> engine >>> [Thread debugging using libthread_db enabled] >>> Using host libthread_db library "/lib/x86_64-linux- >>> gnu/libthread_db.so.1". >>> >>> Program received signal SIGSEGV, Segmentation fault. >>> 0x00007ffff7402036 in parse_tz_get_trip (info=0x7fffffffdf60, >>> tz=0x555555607898) at commands.c:143 >>> 143 __tt[size].id = -1; >>> (gdb) backtrace >>> #0 0x00007ffff7402036 in parse_tz_get_trip (info=0x7fffffffdf60, >>> tz=0x555555607898) at commands.c:143 >>> #1 0x00007ffff7402233 in handle_netlink (unused=0x0, >>> cmd=0x7ffff76052f8 <thermal_cmds+120>, info=0x7fffffffdf60, >>> arg=0x555555607898) at commands.c:206 >>> #2 0x00007ffff7003435 in ?? () from /lib/x86_64-linux-gnu/libnl- >>> genl- >>> 3.so.200 >>> #3 0x00007ffff6810c1c in nl_recvmsgs_report () from /lib/x86_64- >>> linux- >>> gnu/libnl-3.so.200 >>> #4 0x00007ffff6811049 in nl_recvmsgs () from /lib/x86_64-linux- >>> gnu/libnl-3.so.200 >>> #5 0x00007ffff7402eaf in nl_send_msg (sock=0x555555606040, >>> cb=0x5555556065d0, msg=0x555555606110, rx_handler=0x7ffff70036f0 >>> <genl_handle_msg>, data=0x555555607898) at thermal_nl.c:70 >>> #6 0x00007ffff7402327 in thermal_genl_auto (th=0x5555556048a0, >>> id=1, >>> cmd=2, flags=0, arg=0x555555607898) at commands.c:282 >>> #7 0x00007ffff74023e0 in thermal_cmd_get_trip (th=0x5555556048a0, >>> tz=0x555555607898) at commands.c:304 >>> #8 0x00007ffff74039db in __thermal_zone_discover >>> (tz=0x555555607898, >>> th=0x5555556048a0) at thermal.c:71 >>> #9 0x00007ffff7403842 in for_each_thermal_zone (tz=0x555555607860, >>> cb=0x7ffff74039b8 <__thermal_zone_discover>, arg=0x5555556048a0) at >>> thermal.c:33 >>> #10 0x00007ffff7403a5b in thermal_zone_discover (th=0x5555556048a0) >>> at >>> thermal.c:87 >>> #11 0x00005555554019bd in main () >>> >>> Thanks, >>> Srinivas >>> >>>> >>> >>> >> >> >
Hi Srinivas, On 18/04/2022 05:36, srinivas pandruvada wrote: > Hi Daniel, > > The attached diff fixes the crash, > > Also when you run in daemon mode, you need to use some pid lock file. > Otherwise it launches multiple daemons. I've been thinking about it and I don't think it is a problem to have multiple instances of the daemon. The netlink allows multicast and can be run as non-root user. If the finality of the thermal engine is to manage the system and has some code making actions on the system with the root privilege, the init scripts can take care of the pid lock
Hi Daniel, On Tue, 2022-04-19 at 22:26 +0200, Daniel Lezcano wrote: > > Hi Srinivas, > > > On 18/04/2022 05:36, srinivas pandruvada wrote: > > Hi Daniel, > > > > The attached diff fixes the crash, > > > > Also when you run in daemon mode, you need to use some pid lock > > file. > > Otherwise it launches multiple daemons. > > I've been thinking about it and I don't think it is a problem to have > multiple instances of the daemon. The netlink allows multicast and > can > be run as non-root user. > > If the finality of the thermal engine is to manage the system and has > some code making actions on the system with the root privilege, the > init > scripts can take care of the pid lock > If there is use case, then this is fine otherwise wasting system resources. Thanks, Srinivas > >
These changes are providing the following tools and library: - A thermal library doing the netlink abstraction from the kernel in order to make the userspace thermal implementation easier. Having the library integrated with the kernel tree is also a guarantee to keep the message format and their encoding/decoding aligned - A thermal tools library providing a set of functions to deal with usual features like the log, the mainloop and the time. This library is used by the provided tools below - An data acquisition program to capture the temperature of the different thermal zone during an amount of time or during the execution of an application. The output is formated to be easily parsed by gnuplot, a spreadsheet program or a statistical command line utility. The timestamp is based on the system uptime, thus giving an indication of when a thermal event happened, that can help to spot or reproduce thermal issue in the long run - A thermal monitoring program based on the thermal library. It gives a skeleton to build any logic on top of it and shows how to use the thermal library. It does nothing except discovering the thermal zones, their trip points and listening for events like cooling devices state changes or trip point crossed Changelog: v1: Initial post after a RFC v2: - Fixed all trailing whitespaces and some other checkpatch warnings. Some warnings remain but they can be considered as false positive - Added in the thermometer tool: - Usage/help option as well as a man page - The ability to execute a program - The capture duration - Create the output directory if it does not exist - Add in the thermal-engine tool: - A usage/help option - A message telling the userspace it is waiting for events - A daemonize option - Minor bug fixes here and there, as well as typos Daniel Lezcano (4): tools/lib/thermal: Add a thermal library tools/thermal: Add util library tools/thermal: A temperature capture tool tools/thermal: Add thermal daemon skeleton MAINTAINERS | 1 + tools/Makefile | 36 +- tools/lib/thermal/.gitignore | 2 + tools/lib/thermal/Build | 5 + tools/lib/thermal/Makefile | 165 ++++++ tools/lib/thermal/commands.c | 349 +++++++++++ tools/lib/thermal/events.c | 164 +++++ tools/lib/thermal/include/thermal.h | 142 +++++ tools/lib/thermal/libthermal.map | 25 + tools/lib/thermal/libthermal.pc.template | 12 + tools/lib/thermal/sampling.c | 75 +++ tools/lib/thermal/thermal.c | 126 ++++ tools/lib/thermal/thermal_nl.c | 215 +++++++ tools/lib/thermal/thermal_nl.h | 46 ++ tools/thermal/lib/Build | 3 + tools/thermal/lib/Makefile | 158 +++++ .../thermal/lib/libthermal_tools.pc.template | 12 + tools/thermal/lib/log.c | 77 +++ tools/thermal/lib/log.h | 31 + tools/thermal/lib/mainloop.c | 120 ++++ tools/thermal/lib/mainloop.h | 15 + tools/thermal/lib/thermal-tools.h | 10 + tools/thermal/lib/uptimeofday.c | 40 ++ tools/thermal/lib/uptimeofday.h | 12 + tools/thermal/thermal-engine/Build | 2 + tools/thermal/thermal-engine/Makefile | 28 + tools/thermal/thermal-engine/thermal-engine.c | 326 ++++++++++ tools/thermal/thermometer/Build | 2 + tools/thermal/thermometer/Makefile | 26 + tools/thermal/thermometer/thermometer.8 | 93 +++ tools/thermal/thermometer/thermometer.c | 558 ++++++++++++++++++ tools/thermal/thermometer/thermometer.conf | 5 + 32 files changed, 2878 insertions(+), 3 deletions(-) create mode 100644 tools/lib/thermal/.gitignore create mode 100644 tools/lib/thermal/Build create mode 100644 tools/lib/thermal/Makefile create mode 100644 tools/lib/thermal/commands.c create mode 100644 tools/lib/thermal/events.c create mode 100644 tools/lib/thermal/include/thermal.h create mode 100644 tools/lib/thermal/libthermal.map create mode 100644 tools/lib/thermal/libthermal.pc.template create mode 100644 tools/lib/thermal/sampling.c create mode 100644 tools/lib/thermal/thermal.c create mode 100644 tools/lib/thermal/thermal_nl.c create mode 100644 tools/lib/thermal/thermal_nl.h create mode 100644 tools/thermal/lib/Build create mode 100644 tools/thermal/lib/Makefile create mode 100644 tools/thermal/lib/libthermal_tools.pc.template create mode 100644 tools/thermal/lib/log.c create mode 100644 tools/thermal/lib/log.h create mode 100644 tools/thermal/lib/mainloop.c create mode 100644 tools/thermal/lib/mainloop.h create mode 100644 tools/thermal/lib/thermal-tools.h create mode 100644 tools/thermal/lib/uptimeofday.c create mode 100644 tools/thermal/lib/uptimeofday.h create mode 100644 tools/thermal/thermal-engine/Build create mode 100644 tools/thermal/thermal-engine/Makefile create mode 100644 tools/thermal/thermal-engine/thermal-engine.c create mode 100644 tools/thermal/thermometer/Build create mode 100644 tools/thermal/thermometer/Makefile create mode 100644 tools/thermal/thermometer/thermometer.8 create mode 100644 tools/thermal/thermometer/thermometer.c create mode 100644 tools/thermal/thermometer/thermometer.conf