diff mbox series

[RESEND,v2] PCI: Sanitise firmware BAR assignments behind a PCI-PCI bridge

Message ID alpine.DEB.2.21.2202010150100.58572@angie.orcam.me.uk
State New
Headers show
Series [RESEND,v2] PCI: Sanitise firmware BAR assignments behind a PCI-PCI bridge | expand

Commit Message

Maciej W. Rozycki Feb. 1, 2022, 10:51 a.m. UTC
Fix an issue with the Tyan Tomcat IV S1564D system, the BIOS of which 
does not assign PCI buses beyond #2, where our resource reallocation 
code preserves the reset default of an I/O BAR assignment outside its 
upstream PCI-to-PCI bridge's I/O forwarding range for device 06:08.0 in 
this log:

pci_bus 0000:00: max bus depth: 4 pci_try_num: 5
[...]
pci 0000:06:08.0: BAR 4: no space for [io  size 0x0020]
pci 0000:06:08.0: BAR 4: trying firmware assignment [io  0xfce0-0xfcff]
pci 0000:06:08.0: BAR 4: assigned [io  0xfce0-0xfcff]
pci 0000:06:08.1: BAR 4: no space for [io  size 0x0020]
pci 0000:06:08.1: BAR 4: trying firmware assignment [io  0xfce0-0xfcff]
pci 0000:06:08.1: BAR 4: [io  0xfce0-0xfcff] conflicts with 0000:06:08.0 [io  0xfce0-0xfcff]
pci 0000:06:08.1: BAR 4: failed to assign [io  size 0x0020]
pci 0000:05:00.0: PCI bridge to [bus 06]
pci 0000:05:00.0:   bridge window [mem 0xd8000000-0xd85fffff]
[...]
pci 0000:00:11.0: PCI bridge to [bus 01-06]
pci 0000:00:11.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:11.0:   bridge window [mem 0xd8000000-0xdfffffff]
pci 0000:00:11.0:   bridge window [mem 0xa8000000-0xafffffff 64bit pref]
pci_bus 0000:00: No. 2 try to assign unassigned res
[...]
pci 0000:06:08.1: BAR 4: no space for [io  size 0x0020]
pci 0000:06:08.1: BAR 4: trying firmware assignment [io  0xfce0-0xfcff]
pci 0000:06:08.1: BAR 4: [io  0xfce0-0xfcff] conflicts with 0000:06:08.0 [io  0xfce0-0xfcff]
pci 0000:06:08.1: BAR 4: failed to assign [io  size 0x0020]
pci 0000:05:00.0: PCI bridge to [bus 06]
pci 0000:05:00.0:   bridge window [mem 0xd8000000-0xd85fffff]
[...]
pci 0000:00:11.0: PCI bridge to [bus 01-06]
pci 0000:00:11.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:11.0:   bridge window [mem 0xd8000000-0xdfffffff]
pci 0000:00:11.0:   bridge window [mem 0xa8000000-0xafffffff 64bit pref]
pci_bus 0000:00: No. 3 try to assign unassigned res
pci 0000:00:11.0: resource 7 [io  0xe000-0xefff] released
[...]
pci 0000:06:08.1: BAR 4: assigned [io  0x2000-0x201f]
pci 0000:05:00.0: PCI bridge to [bus 06]
pci 0000:05:00.0:   bridge window [io  0x2000-0x2fff]
pci 0000:05:00.0:   bridge window [mem 0xd8000000-0xd85fffff]
[...]
pci 0000:00:11.0: PCI bridge to [bus 01-06]
pci 0000:00:11.0:   bridge window [io  0x1000-0x2fff]
pci 0000:00:11.0:   bridge window [mem 0xd8000000-0xdfffffff]
pci 0000:00:11.0:   bridge window [mem 0xa8000000-0xafffffff 64bit pref]
pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 0 [io  0x1000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xd8000000-0xdfffffff]
pci_bus 0000:01: resource 2 [mem 0xa8000000-0xafffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0x1000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xd8000000-0xd8bfffff]
pci_bus 0000:04: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:04: resource 1 [mem 0xd8600000-0xd8afffff]
pci_bus 0000:05: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:05: resource 1 [mem 0xd8000000-0xd85fffff]
pci_bus 0000:06: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:06: resource 1 [mem 0xd8000000-0xd85fffff]

-- note that the assignment of 0xfce0-0xfcff is outside the range of 
0x2000-0x2fff assigned to bus #6:

05:00.0 PCI bridge: Texas Instruments XIO2000(A)/XIO2200A PCI Express-to-PCI Bridge (rev 03) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=05, secondary=06, subordinate=06, sec-latency=0
        I/O behind bridge: 00002000-00002fff
        Memory behind bridge: d8000000-d85fffff
        Capabilities: [50] Power Management version 2
        Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/4 Enable-
        Capabilities: [80] #0d [0000]
        Capabilities: [90] Express PCI/PCI-X Bridge IRQ 0

06:08.0 USB controller: VIA Technologies, Inc. VT82xx/62xx/VX700/8x0/900 UHCI USB 1.1 Controller (rev 61) (prog-if 00 [UHCI])
	Subsystem: VIA Technologies, Inc. VT82xx/62xx/VX700/8x0/900 UHCI USB 1.1 Controller
        Flags: bus master, medium devsel, latency 22, IRQ 5
        I/O ports at fce0 [size=32]
        Capabilities: [80] Power Management version 2

06:08.1 USB controller: VIA Technologies, Inc. VT82xx/62xx/VX700/8x0/900 UHCI USB 1.1 Controller (rev 61) (prog-if 00 [UHCI])
	Subsystem: VIA Technologies, Inc. VT82xx/62xx/VX700/8x0/900 UHCI USB 1.1 Controller
        Flags: bus master, medium devsel, latency 22, IRQ 5
        I/O ports at 2000 [size=32]
        Capabilities: [80] Power Management version 2

Since both 06:08.0 and 06:08.1 have the same reset defaults the latter 
device escapes its fate and gets a good assignment owing to an address 
conflict with the former device.

Consequently when the device driver tries to access 06:08.0 according to 
its designated address range it pokes at an unassigned I/O location, 
likely subtractively decoded by the southbridge and forwarded to ISA, 
causing the driver to become confused and bail out:

uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host controller halted, very bad!
uhci_hcd 0000:06:08.0: HCRESET not completed yet!
uhci_hcd 0000:06:08.0: HC died; cleaning up

if good luck happens or if bad luck does, an infinite flood of messages:

uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
[...]

making the system virtually unusuable.

This is because we have code to deal with a situation from PR #16263, 
where broken ACPI firmware reports the wrong address range for the host 
bridge's decoding window and trying to adjust to the window causes more 
breakage than leaving the BIOS assignments intact.

This may work for a device directly on the root bus decoded by the host 
bridge only, but for a device behind one or more PCI-to-PCI (or CardBus) 
bridges those bridges' forwarding windows have been standardised and 
need to be respected, or leaving whatever has been there in a downstream 
device's BAR will have no effect as cycles for the addresses recorded 
there will have no chance to appear on the bus the device has been 
immediately attached to.

Make sure then for a device behind a PCI-to-PCI bridge that any firmware 
assignment is within the bridge's relevant forwarding window or do not 
restore the assignment, fixing the system concerned as follows:

pci_bus 0000:00: max bus depth: 4 pci_try_num: 5
[...]
pci 0000:06:08.0: BAR 4: no space for [io  size 0x0020]
pci 0000:06:08.0: BAR 4: failed to assign [io  0xfce0-0xfcff]
pci 0000:06:08.1: BAR 4: no space for [io  size 0x0020]
pci 0000:06:08.1: BAR 4: failed to assign [io  0xfce0-0xfcff]
[...]
pci_bus 0000:00: No. 2 try to assign unassigned res
[...]
pci 0000:06:08.0: BAR 4: no space for [io  size 0x0020]
pci 0000:06:08.0: BAR 4: failed to assign [io  0xfce0-0xfcff]
pci 0000:06:08.1: BAR 4: no space for [io  size 0x0020]
pci 0000:06:08.1: BAR 4: failed to assign [io  0xfce0-0xfcff]
[...]
pci_bus 0000:00: No. 3 try to assign unassigned res
[...]
pci 0000:06:08.0: BAR 4: assigned [io  0x2000-0x201f]
pci 0000:06:08.1: BAR 4: assigned [io  0x2020-0x203f]

and making device 06:08.0 work correctly.

Cf. <https://bugzilla.kernel.org/show_bug.cgi?id=16263>

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: 58c84eda0756 ("PCI: fall back to original BIOS BAR addresses")
Cc: stable@vger.kernel.org # v2.6.35+
---
Hi,

 Resending this patch as it has gone into void.  Patch re-verified against 
5.17-rc2.

 For the record the system's bus topology is as follows:

-[0000:00]-+-00.0
           +-07.0
           +-07.1
           +-07.2
           +-11.0-[0000:01-06]----00.0-[0000:02-06]--+-00.0-[0000:03]--
           |                                         +-01.0-[0000:04]--+-00.0
           |                                         |                 \-00.3
           |                                         \-02.0-[0000:05-06]----00.0-[0000:06]--+-05.0
           |                                                                                +-08.0
           |                                                                                +-08.1
           |                                                                                \-08.2
           +-12.0
           +-13.0
           \-14.0

  Maciej

Changes from v1:

- Do restore firmware BAR assignments behind a PCI-PCI bridge, but only if 
  within the bridge's forwarding window.

- Update the change description and heading accordingly (was: PCI: Do not 
  restore firmware BAR assignments behind a PCI-PCI bridge).
---
 drivers/pci/setup-res.c |   12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

linux-pci-setup-res-fw-address-nobridge.diff

Comments

Maciej W. Rozycki Feb. 15, 2022, 9:29 p.m. UTC | #1
On Tue, 1 Feb 2022, Maciej W. Rozycki wrote:

> Fix an issue with the Tyan Tomcat IV S1564D system, the BIOS of which 
> does not assign PCI buses beyond #2, where our resource reallocation 
> code preserves the reset default of an I/O BAR assignment outside its 
> upstream PCI-to-PCI bridge's I/O forwarding range for device 06:08.0 in 
> this log:

 Ping for:
<https://lore.kernel.org/all/alpine.DEB.2.21.2202010150100.58572@angie.orcam.me.uk/>

  Maciej
Maciej W. Rozycki March 1, 2022, 8:43 p.m. UTC | #2
On Tue, 1 Feb 2022, Maciej W. Rozycki wrote:

> Fix an issue with the Tyan Tomcat IV S1564D system, the BIOS of which 
> does not assign PCI buses beyond #2, where our resource reallocation 
> code preserves the reset default of an I/O BAR assignment outside its 
> upstream PCI-to-PCI bridge's I/O forwarding range for device 06:08.0 in 
> this log:

 Ping for:
<https://lore.kernel.org/all/alpine.DEB.2.21.2202010150100.58572@angie.orcam.me.uk/>

  Maciej
Bjorn Helgaas March 1, 2022, 11:15 p.m. UTC | #3
On Tue, Feb 01, 2022 at 10:51:11AM +0000, Maciej W. Rozycki wrote:
> Fix an issue with the Tyan Tomcat IV S1564D system, the BIOS of which 
> does not assign PCI buses beyond #2, where our resource reallocation 
> code preserves the reset default of an I/O BAR assignment outside its 
> upstream PCI-to-PCI bridge's I/O forwarding range for device 06:08.0 in 
> this log:

Would you mind collecting the complete dmesg log before your patch?
It's hard to get the entire picture from snippets.

Bjorn
Maciej W. Rozycki March 2, 2022, 12:01 a.m. UTC | #4
On Tue, 1 Mar 2022, Bjorn Helgaas wrote:

> > Fix an issue with the Tyan Tomcat IV S1564D system, the BIOS of which 
> > does not assign PCI buses beyond #2, where our resource reallocation 
> > code preserves the reset default of an I/O BAR assignment outside its 
> > upstream PCI-to-PCI bridge's I/O forwarding range for device 06:08.0 in 
> > this log:
> 
> Would you mind collecting the complete dmesg log before your patch?
> It's hard to get the entire picture from snippets.

 Sure, here's the original log from at the time when I made the patch.  I 
think it's as verbose as you can get; there's no way I could have used it 
for the change description.

 Also I doubt it should matter, but if you need a fresh log instead from 
5.17, then I can make one too, but that will take a bit.  Let me know if 
you need me to try anything else too.

 Thanks,

  Maciej

LILO 22.8 boot: bisect
Loading bisect...........................................................
BIOS data check successful
Linux version 5.13.0-rc6-00229-g15279ebe99d7-dirty (macro@angie) (i386-linux-gnu-gcc (GCC) 11.0.0 20200919 (experimental), GNU ld (GNU Binutils) 2.35.50.20201006) #21 SMP Tue Jul 6 14:36:41 CEST 2021
KERNEL supported cpus:
  Intel GenuineIntel
x86/fpu: x87 FPU will use FSAVE
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved
Notice: NX (Execute Disable) protection missing in CPU!
Legacy DMI 2.0 present.
DMI: Tyan Computer Corp i430HX, BIOS 4.51 PG 05/13/98
tsc: Fast TSC calibration using PIT
tsc: Detected 232.671 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x20000 max_arch_pfn = 0x100000
x86/PAT: Configuration [0-7]: WB  WT  UC- UC  WB  WT  UC- UC  
found SMP MP-table at [mem 0x000f5db0-0x000f5dbf]
initial memory mapped: [mem 0x00000000-0x00bfffff]
512MB LOWMEM available.
  mapped low ram: 0 - 20000000
  low ram: 0 - 20000000
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  Normal   [mem 0x0000000001000000-0x000000001fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009efff]
  node   0: [mem 0x0000000000100000-0x000000001fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000001fffffff]
On node 0 totalpages: 130974
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3998 pages, LIFO batch:0
  Normal zone: 992 pages used for memmap
  Normal zone: 126976 pages, LIFO batch:31
Using APIC driver default
Intel MultiProcessor Specification v1.1
    Virtual Wire compatibility mode.
MPTABLE: OEM ID: OEM00000
MPTABLE: Product ID: PROD00000000
MPTABLE: APIC at: 0xFEE00000
Processor #0 (Bootup-CPU)
BIOS bug: APIC version mismatch, boot CPU: 10, CPU 0: version 11
Processor #1
BIOS bug: APIC version mismatch, boot CPU: 10, CPU 1: version 11
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
Processors: 2
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[mem 0x20000000-0xfebfffff] available for PCI devices
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
percpu: Embedded 27 pages/cpu s88300 r0 d22292 u110592
pcpu-alloc: s88300 r0 d22292 u110592 alloc=27*4096
pcpu-alloc: [0] 0 [0] 1 
Built 1 zonelists, mobility grouping on.  Total pages: 129950
Kernel command line: BOOT_IMAGE=bisect ro root=802 console=tty0 console=ttyS0,9600n8 parport=0x378,7 mce noapic debug panic=60 emergency pci=assign-busses,realloc
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
mem auto-init: stack:off, heap alloc:off, heap free:off
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Memory: 510624K/523896K available (5346K kernel code, 578K rwdata, 1208K rodata, 424K init, 272K bss, 13272K reserved, 0K cma-reserved)
rcu: Hierarchical RCU implementation.
	Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
NR_IRQS: 2304, nr_irqs: 56, preallocated irqs: 16
Console: colour VGA+ 80x25
printk: console [tty0] enabled
printk: console [ttyS0] enabled
APIC: Switch to symmetric I/O mode setup
Enabling APIC mode:  Flat.  Using 1 I/O APICs
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6b52767c30, max_idle_ns: 881590452765 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 465.34 BogoMIPS (lpj=2326710)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Intel Pentium with F0 0F bug - workaround enabled.
mce: Intel old style machine check architecture supported.
mce: Intel old style machine check reporting enabled on CPU#0.
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
Freeing SMP alternatives memory: 24K
smpboot: CPU0: Intel Pentium MMX (family: 0x5, model: 0x4, stepping: 0x3)
Performance Events: no PMU driver, software events only.
rcu: Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1
mce: Intel old style machine check architecture supported.
mce: Intel old style machine check reporting enabled on CPU#1.
[Firmware Bug]: CPU1: APIC id mismatch. Firmware: 1 APIC: 0
smp: Brought up 1 node, 2 CPUs
smpboot: Max logical packages: 2
smpboot: Total of 2 processors activated (930.79 BogoMIPS)
random: get_random_u32 called from bucket_table_alloc.isra.0+0x5b/0x130 with crng_init=0
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 512 (order: 2, 16384 bytes, linear)
NET: Registered protocol family 16
PCI: Using configuration type 1 for base access
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 8
NET: Registered protocol family 20
PCI: Probing PCI hardware
PCI: root bus 00: using default resources
PCI: Probing PCI hardware (bus 00)
PCI host bridge to bus 0000:00
clocksource: timekeeping watchdog on CPU0: Marking clocksource 'tsc-early' as unstable because the skew is too large:
clocksource:                       'refined-jiffies' wd_now: ffff8b39 wd_last: ffff8b07 mask: ffffffff
clocksource:                       'tsc-early' cs_now: 50fdc058d cs_last: 4ff05ffb9 mask: ffffffffffffffff
tsc: Marking TSC unstable due to clocksource watchdog
pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
pci_bus 0000:00: scanning bus
pci 0000:00:00.0: [8086:1250] type 00 class 0x060000
pci 0000:00:07.0: [8086:7000] type 00 class 0x060100
pci 0000:00:07.1: [8086:7010] type 00 class 0x010180
pci 0000:00:07.1: reg 0x20: [io  0xf000-0xf00f]
pci 0000:00:07.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
pci 0000:00:07.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
pci 0000:00:07.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
pci 0000:00:07.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
pci 0000:00:07.2: [8086:7020] type 00 class 0x0c0300
pci 0000:00:07.2: reg 0x20: [io  0x6000-0x601f]
pci 0000:00:11.0: [12d8:e111] type 01 class 0x060400
pci 0000:00:11.0: enabling Extended Tags
pci 0000:00:11.0: Enable PCIe Retrain Link quirk
pci 0000:00:12.0: [1011:000f] type 00 class 0x020200
pci 0000:00:12.0: reg 0x10: [mem 0xe0010000-0xe001007f]
pci 0000:00:12.0: reg 0x14: [io  0x6400-0x647f]
pci 0000:00:12.0: reg 0x18: [mem 0xe0000000-0xe000ffff]
pci 0000:00:13.0: [104b:1040] type 00 class 0x010000
pci 0000:00:13.0: reg 0x10: [io  0x6800-0x6803]
pci 0000:00:13.0: reg 0x14: [mem 0xe0011000-0xe0011fff]
pci 0000:00:13.0: reg 0x30: [mem 0x00000000-0x00007fff pref]
pci 0000:00:14.0: [10b7:9200] type 00 class 0x020000
pci 0000:00:14.0: reg 0x10: [io  0x6c00-0x6c7f]
pci 0000:00:14.0: reg 0x14: [mem 0xe0012000-0xe001207f]
pci 0000:00:14.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:14.0: supports D1 D2
pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: PME# disabled
pci_bus 0000:00: fixups for bus
pci 0000:00:11.0: scanning [bus 01-01] behind bridge, pass 0
pci 0000:00:11.0: scanning [bus 00-00] behind bridge, pass 1
pci_bus 0000:01: extended config space not accessible
pci_bus 0000:01: scanning bus
pci 0000:01:00.0: [104c:8232] type 01 class 0x060400
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci_bus 0000:01: fixups for bus
pci 0000:00:11.0: PCI bridge to [bus 01-ff]
pci 0000:00:11.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:11.0:   bridge window [mem 0xd8000000-0xdfffffff]
pci 0000:00:11.0:   bridge window [mem 0xa8000000-0xafffffff 64bit pref]
pci 0000:01:00.0: scanning [bus 00-00] behind bridge, pass 0
pci 0000:01:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:01:00.0: scanning [bus 00-00] behind bridge, pass 1
pci_bus 0000:02: extended config space not accessible
pci_bus 0000:02: scanning bus
pci 0000:02:00.0: [104c:8233] type 01 class 0x060400
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:01.0: [104c:8233] type 01 class 0x060400
pci 0000:02:01.0: supports D1 D2
pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:01.0: PME# disabled
pci 0000:02:02.0: [104c:8233] type 01 class 0x060400
pci 0000:02:02.0: supports D1 D2
pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:02.0: PME# disabled
pci_bus 0000:02: fixups for bus
pci 0000:01:00.0: PCI bridge to [bus 02-ff]
pci 0000:01:00.0:   bridge window [io  0x0000-0x0fff]
pci 0000:01:00.0:   bridge window [mem 0x00000000-0x000fffff]
pci 0000:01:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
pci 0000:02:00.0: scanning [bus 00-00] behind bridge, pass 0
pci 0000:02:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:02:01.0: scanning [bus 00-00] behind bridge, pass 0
pci 0000:02:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:02:02.0: scanning [bus 00-00] behind bridge, pass 0
pci 0000:02:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:02:00.0: scanning [bus 00-00] behind bridge, pass 1
pci_bus 0000:03: extended config space not accessible
pci_bus 0000:03: scanning bus
pci_bus 0000:03: fixups for bus
pci 0000:02:00.0: PCI bridge to [bus 03-ff]
pci 0000:02:00.0:   bridge window [io  0x0000-0x0fff]
pci 0000:02:00.0:   bridge window [mem 0x00000000-0x000fffff]
pci 0000:02:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
pci_bus 0000:03: bus scan returning with max=03
pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 03
pci 0000:02:01.0: scanning [bus 00-00] behind bridge, pass 1
pci_bus 0000:04: extended config space not accessible
pci_bus 0000:04: scanning bus
pci 0000:04:00.0: [1415:c118] type 00 class 0x070102
pci 0000:04:00.0: reg 0x10: [io  0x0000-0x0007]
pci 0000:04:00.0: reg 0x14: [io  0x0000-0x0003]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.3: [1415:c11b] type 00 class 0x070002
pci 0000:04:00.3: reg 0x10: [mem 0x00000000-0x00003fff]
pci 0000:04:00.3: reg 0x14: [mem 0x00000000-0x001fffff]
pci 0000:04:00.3: reg 0x18: [mem 0x00000000-0x001fffff]
pci 0000:04:00.3: supports D1 D2
pci 0000:04:00.3: PME# supported from D1 D2 D3hot D3cold
pci 0000:04:00.3: PME# disabled
pci_bus 0000:04: fixups for bus
pci 0000:02:01.0: PCI bridge to [bus 04-ff]
pci 0000:02:01.0:   bridge window [io  0x0000-0x0fff]
pci 0000:02:01.0:   bridge window [mem 0x00000000-0x000fffff]
pci 0000:02:01.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
pci_bus 0000:04: bus scan returning with max=04
pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 04
pci 0000:02:02.0: scanning [bus 00-00] behind bridge, pass 1
pci_bus 0000:05: extended config space not accessible
pci_bus 0000:05: scanning bus
pci 0000:05:00.0: [104c:8231] type 01 class 0x060400
pci 0000:05:00.0: supports D1 D2
pci_bus 0000:05: fixups for bus
pci 0000:02:02.0: PCI bridge to [bus 05-ff]
pci 0000:02:02.0:   bridge window [io  0x0000-0x0fff]
pci 0000:02:02.0:   bridge window [mem 0x00000000-0x000fffff]
pci 0000:02:02.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
pci 0000:05:00.0: scanning [bus 00-00] behind bridge, pass 0
pci 0000:05:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:05:00.0: scanning [bus 00-00] behind bridge, pass 1
pci_bus 0000:06: extended config space not accessible
pci_bus 0000:06: scanning bus
pci 0000:06:05.0: [111a:0002] type 00 class 0x020300
pci 0000:06:05.0: reg 0x10: [mem 0x00000000-0x003fffff]
pci 0000:06:05.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:06:08.0: [1106:3038] type 00 class 0x0c0300
pci 0000:06:08.0: reg 0x20: [io  0xfce0-0xfcff]
pci 0000:06:08.0: supports D1 D2
pci 0000:06:08.0: PME# supported from D0 D1 D2 D3hot
pci 0000:06:08.0: PME# disabled
pci 0000:06:08.1: [1106:3038] type 00 class 0x0c0300
pci 0000:06:08.1: reg 0x20: [io  0xfce0-0xfcff]
pci 0000:06:08.1: supports D1 D2
pci 0000:06:08.1: PME# supported from D0 D1 D2 D3hot
pci 0000:06:08.1: PME# disabled
pci 0000:06:08.2: [1106:3104] type 00 class 0x0c0320
pci 0000:06:08.2: reg 0x10: [mem 0x00000000-0x000000ff]
pci 0000:06:08.2: supports D1 D2
pci 0000:06:08.2: PME# supported from D0 D1 D2 D3hot
pci 0000:06:08.2: PME# disabled
pci_bus 0000:06: fixups for bus
pci 0000:05:00.0: PCI bridge to [bus 06-ff]
pci 0000:05:00.0:   bridge window [io  0x0000-0x0fff]
pci 0000:05:00.0:   bridge window [mem 0x00000000-0x000fffff]
pci 0000:05:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
pci_bus 0000:06: bus scan returning with max=06
pci_bus 0000:06: busn_res: [bus 06-ff] end is updated to 06
pci_bus 0000:05: bus scan returning with max=06
pci_bus 0000:05: busn_res: [bus 05-ff] end is updated to 06
pci_bus 0000:02: bus scan returning with max=06
pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 06
pci_bus 0000:01: bus scan returning with max=06
pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 06
pci_bus 0000:00: bus scan returning with max=06
pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 06
PCI: IRQ init
PCI: Interrupt Routing Table found at 0xfde10
00:14.0 slot=01
 0:60/deb8
 1:61/deb8
 2:62/deb8
 3:63/deb8

00:13.0 slot=02
 0:61/deb8
 1:62/deb8
 2:63/deb8
 3:60/deb8

00:12.0 slot=03
 0:62/deb8
 1:63/deb8
 2:60/deb8
 3:61/deb8

00:11.0 slot=04
 0:63/deb8
 1:60/deb8
 2:61/deb8
 3:62/deb8

00:07.1 slot=00
 0:00/deb8
 1:00/deb8
 2:00/deb8
 3:00/deb8

00:07.2 slot=00
 0:00/deb8
 1:00/deb8
 2:00/deb8
 3:63/deb8

PCI: Attempting to find IRQ router for [8086:7000]
PCI: Trying IRQ router for [8086:7000]
pci 0000:00:07.0: SIO/PIIX/ICH IRQ router [8086:7000]
PCI: IRQ fixup
pci 0000:02:00.0: ignoring bogus IRQ 255
pci 0000:02:01.0: ignoring bogus IRQ 255
pci 0000:02:02.0: ignoring bogus IRQ 255
pci 0000:04:00.0: ignoring bogus IRQ 255
pci 0000:04:00.3: ignoring bogus IRQ 255
pci 0000:00:11.0: PCI INT A -> PIRQ 63, mask deb8, excl 0c20
pci 0000:00:11.0: PCI INT A -> newirq 0
PCI: setting IRQ 11 as level-triggered
pci 0000:00:11.0: found PCI INT A -> IRQ 11
pci 0000:00:11.0: sharing IRQ 11 with 0000:00:07.2
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:00:11.0: sharing IRQ 11 with 0000:02:00.0
pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B
pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C
pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:00:11.0: sharing IRQ 11 with 0000:04:00.3
pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D
pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C
pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:00:11.0: sharing IRQ 11 with 0000:06:08.2
pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B
pci 0000:02:01.0: PCI INT A -> PIRQ 60, mask deb8, excl 0c20
pci 0000:02:01.0: PCI INT A -> newirq 0
PCI: setting IRQ 10 as level-triggered
pci 0000:02:01.0: found PCI INT A -> IRQ 10
pci 0000:02:01.0: sharing IRQ 10 with 0000:00:14.0
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B
pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C
pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B
pci 0000:02:01.0: sharing IRQ 10 with 0000:04:00.0
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D
pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C
pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C
pci 0000:02:02.0: PCI INT A -> PIRQ 61, mask deb8, excl 0c20
pci 0000:02:02.0: PCI INT A -> newirq 0
PCI: setting IRQ 5 as level-triggered
pci 0000:02:02.0: found PCI INT A -> IRQ 5
pci 0000:02:02.0: sharing IRQ 5 with 0000:00:13.0
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B
pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C
pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D
pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C
pci 0000:02:02.0: sharing IRQ 5 with 0000:06:08.0
pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D
pci 0000:06:05.0: PCI INT A -> PIRQ 62, mask deb8, excl 0c20
pci 0000:06:05.0: PCI INT A -> newirq 0
pci 0000:06:05.0: found PCI INT A -> IRQ 5
pci 0000:06:05.0: sharing IRQ 5 with 0000:00:12.0
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B
pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C
pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D
pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C
pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D
pci 0000:06:05.0: sharing IRQ 5 with 0000:06:08.1
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
PCI: pci_cache_line_size set to 32 bytes
PCI: Allocating resources
pci 0000:00:07.1: BAR 0: reserving [io  0x01f0-0x01f7 flags 0x110] (d=0, p=0)
pci 0000:00:07.1: BAR 1: reserving [io  0x03f6 flags 0x110] (d=0, p=0)
pci 0000:00:07.1: BAR 2: reserving [io  0x0170-0x0177 flags 0x110] (d=0, p=0)
pci 0000:00:07.1: BAR 3: reserving [io  0x0376 flags 0x110] (d=0, p=0)
pci 0000:00:07.1: BAR 4: reserving [io  0xf000-0xf00f flags 0x40101] (d=0, p=0)
pci 0000:00:07.2: BAR 4: reserving [io  0x6000-0x601f flags 0x40101] (d=0, p=0)
pci 0000:00:12.0: BAR 0: reserving [mem 0xe0010000-0xe001007f flags 0x40200] (d=0, p=0)
pci 0000:00:12.0: BAR 1: reserving [io  0x6400-0x647f flags 0x40101] (d=0, p=0)
pci 0000:00:12.0: BAR 2: reserving [mem 0xe0000000-0xe000ffff flags 0x40200] (d=0, p=0)
pci 0000:00:13.0: BAR 0: reserving [io  0x6800-0x6803 flags 0x40101] (d=0, p=0)
pci 0000:00:13.0: BAR 1: reserving [mem 0xe0011000-0xe0011fff flags 0x40200] (d=0, p=0)
pci 0000:00:14.0: BAR 0: reserving [io  0x6c00-0x6c7f flags 0x40101] (d=0, p=0)
pci 0000:00:14.0: BAR 1: reserving [mem 0xe0012000-0xe001207f flags 0x40200] (d=0, p=0)
pci 0000:06:08.0: BAR 4: reserving [io  0xfce0-0xfcff flags 0x40101] (d=1, p=1)
pci 0000:06:08.0: can't claim BAR 4 [io  0xfce0-0xfcff]: no compatible bridge window
pci 0000:06:08.1: BAR 4: reserving [io  0xfce0-0xfcff flags 0x40101] (d=1, p=1)
pci 0000:06:08.1: can't claim BAR 4 [io  0xfce0-0xfcff]: no compatible bridge window
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
clocksource: Switched to clocksource refined-jiffies
NET: Registered protocol family 2
IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
TCP: Hash tables configured (established 4096 bind 4096)
UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci_bus 0000:00: max bus depth: 4 pci_try_num: 5
pci 0000:00:14.0: BAR 6: assigned [mem 0x20000000-0x2001ffff pref]
pci 0000:00:13.0: BAR 6: assigned [mem 0x20020000-0x20027fff pref]
pci 0000:01:00.0: BAR 8: assigned [mem 0xd8000000-0xd8bfffff]
pci 0000:01:00.0: BAR 7: no space for [io  size 0x2000]
pci 0000:01:00.0: BAR 7: failed to assign [io  size 0x2000]
pci 0000:02:02.0: BAR 8: assigned [mem 0xd8000000-0xd85fffff]
pci 0000:02:01.0: BAR 8: assigned [mem 0xd8600000-0xd8afffff]
pci 0000:02:01.0: BAR 7: no space for [io  size 0x1000]
pci 0000:02:01.0: BAR 7: failed to assign [io  size 0x1000]
pci 0000:02:02.0: BAR 7: no space for [io  size 0x1000]
pci 0000:02:02.0: BAR 7: failed to assign [io  size 0x1000]
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:04:00.3: BAR 1: assigned [mem 0xd8600000-0xd87fffff]
pci 0000:04:00.3: BAR 2: assigned [mem 0xd8800000-0xd89fffff]
pci 0000:04:00.3: BAR 0: assigned [mem 0xd8a00000-0xd8a03fff]
pci 0000:04:00.0: BAR 0: no space for [io  size 0x0008]
pci 0000:04:00.0: BAR 0: failed to assign [io  size 0x0008]
pci 0000:04:00.0: BAR 1: no space for [io  size 0x0004]
pci 0000:04:00.0: BAR 1: failed to assign [io  size 0x0004]
pci 0000:02:01.0: PCI bridge to [bus 04]
pci 0000:02:01.0:   bridge window [mem 0xd8600000-0xd8afffff]
pci 0000:05:00.0: BAR 8: assigned [mem 0xd8000000-0xd85fffff]
pci 0000:05:00.0: BAR 7: no space for [io  size 0x1000]
pci 0000:05:00.0: BAR 7: failed to assign [io  size 0x1000]
pci 0000:06:05.0: BAR 0: assigned [mem 0xd8000000-0xd83fffff]
pci 0000:06:05.0: BAR 6: assigned [mem 0xd8400000-0xd841ffff pref]
pci 0000:06:08.2: BAR 0: assigned [mem 0xd8420000-0xd84200ff]
pci 0000:06:08.0: BAR 4: no space for [io  size 0x0020]
pci 0000:06:08.0: BAR 4: trying firmware assignment [io  0xfce0-0xfcff]
pci 0000:06:08.0: BAR 4: assigned [io  0xfce0-0xfcff]
pci 0000:06:08.1: BAR 4: no space for [io  size 0x0020]
pci 0000:06:08.1: BAR 4: trying firmware assignment [io  0xfce0-0xfcff]
pci 0000:06:08.1: BAR 4: [io  0xfce0-0xfcff] conflicts with 0000:06:08.0 [io  0xfce0-0xfcff]
pci 0000:06:08.1: BAR 4: failed to assign [io  size 0x0020]
pci 0000:05:00.0: PCI bridge to [bus 06]
pci 0000:05:00.0:   bridge window [mem 0xd8000000-0xd85fffff]
pci 0000:02:02.0: PCI bridge to [bus 05-06]
pci 0000:02:02.0:   bridge window [mem 0xd8000000-0xd85fffff]
pci 0000:01:00.0: PCI bridge to [bus 02-06]
pci 0000:01:00.0:   bridge window [mem 0xd8000000-0xd8bfffff]
pci 0000:00:11.0: PCI bridge to [bus 01-06]
pci 0000:00:11.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:11.0:   bridge window [mem 0xd8000000-0xdfffffff]
pci 0000:00:11.0:   bridge window [mem 0xa8000000-0xafffffff 64bit pref]
pci_bus 0000:00: No. 2 try to assign unassigned res
pci 0000:01:00.0: BAR 7: no space for [io  size 0x2000]
pci 0000:01:00.0: BAR 7: failed to assign [io  size 0x2000]
pci 0000:02:01.0: BAR 7: no space for [io  size 0x1000]
pci 0000:02:01.0: BAR 7: failed to assign [io  size 0x1000]
pci 0000:02:02.0: BAR 7: no space for [io  size 0x1000]
pci 0000:02:02.0: BAR 7: failed to assign [io  size 0x1000]
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:04:00.0: BAR 0: no space for [io  size 0x0008]
pci 0000:04:00.0: BAR 0: failed to assign [io  size 0x0008]
pci 0000:04:00.0: BAR 1: no space for [io  size 0x0004]
pci 0000:04:00.0: BAR 1: failed to assign [io  size 0x0004]
pci 0000:02:01.0: PCI bridge to [bus 04]
pci 0000:02:01.0:   bridge window [mem 0xd8600000-0xd8afffff]
pci 0000:05:00.0: BAR 7: no space for [io  size 0x1000]
pci 0000:05:00.0: BAR 7: failed to assign [io  size 0x1000]
pci 0000:06:08.1: BAR 4: no space for [io  size 0x0020]
pci 0000:06:08.1: BAR 4: trying firmware assignment [io  0xfce0-0xfcff]
pci 0000:06:08.1: BAR 4: [io  0xfce0-0xfcff] conflicts with 0000:06:08.0 [io  0xfce0-0xfcff]
pci 0000:06:08.1: BAR 4: failed to assign [io  size 0x0020]
pci 0000:05:00.0: PCI bridge to [bus 06]
pci 0000:05:00.0:   bridge window [mem 0xd8000000-0xd85fffff]
pci 0000:02:02.0: PCI bridge to [bus 05-06]
pci 0000:02:02.0:   bridge window [mem 0xd8000000-0xd85fffff]
pci 0000:01:00.0: PCI bridge to [bus 02-06]
pci 0000:01:00.0:   bridge window [mem 0xd8000000-0xd8bfffff]
pci 0000:00:11.0: PCI bridge to [bus 01-06]
pci 0000:00:11.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:11.0:   bridge window [mem 0xd8000000-0xdfffffff]
pci 0000:00:11.0:   bridge window [mem 0xa8000000-0xafffffff 64bit pref]
pci_bus 0000:00: No. 3 try to assign unassigned res
pci 0000:00:11.0: resource 7 [io  0xe000-0xefff] released
pci 0000:00:11.0: PCI bridge to [bus 01-06]
pci 0000:00:11.0: BAR 7: assigned [io  0x1000-0x2fff]
pci 0000:01:00.0: BAR 7: assigned [io  0x1000-0x2fff]
pci 0000:02:01.0: BAR 7: assigned [io  0x1000-0x1fff]
pci 0000:02:02.0: BAR 7: assigned [io  0x2000-0x2fff]
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:04:00.0: BAR 0: assigned [io  0x1000-0x1007]
pci 0000:04:00.0: BAR 1: assigned [io  0x1008-0x100b]
pci 0000:02:01.0: PCI bridge to [bus 04]
pci 0000:02:01.0:   bridge window [io  0x1000-0x1fff]
pci 0000:02:01.0:   bridge window [mem 0xd8600000-0xd8afffff]
pci 0000:05:00.0: BAR 7: assigned [io  0x2000-0x2fff]
pci 0000:06:08.1: BAR 4: assigned [io  0x2000-0x201f]
pci 0000:05:00.0: PCI bridge to [bus 06]
pci 0000:05:00.0:   bridge window [io  0x2000-0x2fff]
pci 0000:05:00.0:   bridge window [mem 0xd8000000-0xd85fffff]
pci 0000:02:02.0: PCI bridge to [bus 05-06]
pci 0000:02:02.0:   bridge window [io  0x2000-0x2fff]
pci 0000:02:02.0:   bridge window [mem 0xd8000000-0xd85fffff]
pci 0000:01:00.0: PCI bridge to [bus 02-06]
pci 0000:01:00.0:   bridge window [io  0x1000-0x2fff]
pci 0000:01:00.0:   bridge window [mem 0xd8000000-0xd8bfffff]
pci 0000:00:11.0: PCI bridge to [bus 01-06]
pci 0000:00:11.0:   bridge window [io  0x1000-0x2fff]
pci 0000:00:11.0:   bridge window [mem 0xd8000000-0xdfffffff]
pci 0000:00:11.0:   bridge window [mem 0xa8000000-0xafffffff 64bit pref]
pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 0 [io  0x1000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xd8000000-0xdfffffff]
pci_bus 0000:01: resource 2 [mem 0xa8000000-0xafffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0x1000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xd8000000-0xd8bfffff]
pci_bus 0000:04: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:04: resource 1 [mem 0xd8600000-0xd8afffff]
pci_bus 0000:05: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:05: resource 1 [mem 0xd8000000-0xd85fffff]
pci_bus 0000:06: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:06: resource 1 [mem 0xd8000000-0xd85fffff]
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:07.0: Activating ISA DMA hang workarounds
pci 0000:00:07.2: PCI INT D -> PIRQ 63, mask deb8, excl 0c20
pci 0000:00:07.2: PCI INT D -> newirq 11
pci 0000:00:07.2: found PCI INT D -> IRQ 11
pci 0000:00:07.2: sharing IRQ 11 with 0000:00:11.0
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:00:07.2: sharing IRQ 11 with 0000:02:00.0
pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B
pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C
pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:00:07.2: sharing IRQ 11 with 0000:04:00.3
pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D
pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C
pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:00:07.2: sharing IRQ 11 with 0000:06:08.2
pci 0000:00:07.2: quirk_usb_early_handoff+0x0/0x6c0 took 156250 usecs
pci 0000:05:00.0: TI XIO2000a quirk detected; secondary bus fast back-to-back transfers disabled
pci 0000:00:11.0: PCI INT A -> PIRQ 63, mask deb8, excl 0c20
pci 0000:00:11.0: PCI INT A -> newirq 11
pci 0000:00:11.0: found PCI INT A -> IRQ 11
pci 0000:00:11.0: sharing IRQ 11 with 0000:00:07.2
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:00:11.0: sharing IRQ 11 with 0000:02:00.0
pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B
pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C
pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:00:11.0: sharing IRQ 11 with 0000:04:00.3
pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D
pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C
pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:00:11.0: sharing IRQ 11 with 0000:06:08.2
pci 0000:01:00.0: enabling device (0000 -> 0003)
pci 0000:01:00.0: enabling bus mastering
pci 0000:02:02.0: enabling device (0000 -> 0003)
pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C
pci 0000:02:02.0: PCI INT A -> PIRQ 61, mask deb8, excl 0c20
pci 0000:02:02.0: PCI INT A -> newirq 5
pci 0000:02:02.0: found PCI INT A -> IRQ 5
pci 0000:02:02.0: sharing IRQ 5 with 0000:00:13.0
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B
pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C
pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D
pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C
pci 0000:02:02.0: sharing IRQ 5 with 0000:06:08.0
pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:02:02.0: enabling bus mastering
pci 0000:05:00.0: enabling device (0000 -> 0003)
pci 0000:05:00.0: enabling bus mastering
pci 0000:06:08.0: enabling device (0000 -> 0001)
pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C
pci 0000:06:08.0: PCI INT A -> PIRQ 61, mask deb8, excl 0c20
pci 0000:06:08.0: PCI INT A -> newirq 5
pci 0000:06:08.0: found PCI INT A -> IRQ 5
pci 0000:06:08.0: sharing IRQ 5 with 0000:00:13.0
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B
pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C
pci 0000:06:08.0: sharing IRQ 5 with 0000:02:02.0
pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D
pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C
pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:06:08.0: HCRESET not completed yet!
pci 0000:06:08.0: quirk_usb_early_handoff+0x0/0x6c0 took 537109 usecs
pci 0000:06:08.1: enabling device (0000 -> 0001)
pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D
pci 0000:06:08.1: PCI INT B -> PIRQ 62, mask deb8, excl 0c20
pci 0000:06:08.1: PCI INT B -> newirq 5
pci 0000:06:08.1: found PCI INT B -> IRQ 5
pci 0000:06:08.1: sharing IRQ 5 with 0000:00:12.0
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B
pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C
pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D
pci 0000:06:08.1: sharing IRQ 5 with 0000:06:05.0
pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C
pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:06:08.1: quirk_usb_early_handoff+0x0/0x6c0 took 156250 usecs
pci 0000:06:08.2: enabling device (0000 -> 0002)
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:06:08.2: PCI INT C -> PIRQ 63, mask deb8, excl 0c20
pci 0000:06:08.2: PCI INT C -> newirq 11
pci 0000:06:08.2: found PCI INT C -> IRQ 11
pci 0000:06:08.2: sharing IRQ 11 with 0000:00:07.2
pci 0000:06:08.2: sharing IRQ 11 with 0000:00:11.0
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:06:08.2: sharing IRQ 11 with 0000:02:00.0
pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B
pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C
pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:06:08.2: sharing IRQ 11 with 0000:04:00.3
pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D
pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C
pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:06:08.2: quirk_usb_early_handoff+0x0/0x6c0 took 175781 usecs
PCI: CLS 32 bytes, default 32
platform rtc_cmos: registered platform RTC device (no PNP device found)
workingset: timestamp_bits=30 max_order=17 bucket_order=0
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
test_div64: Starting 64bit/32bit division and modulo test
test_div64: Completed 64bit/32bit division and modulo test, 0.070000000s elapsed
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
serial 0000:04:00.3: runtime IRQ mapping not provided by arch
pci 0000:02:01.0: enabling device (0000 -> 0003)
pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B
pci 0000:02:01.0: PCI INT A -> PIRQ 60, mask deb8, excl 0c20
pci 0000:02:01.0: PCI INT A -> newirq 10
pci 0000:02:01.0: found PCI INT A -> IRQ 10
pci 0000:02:01.0: sharing IRQ 10 with 0000:00:14.0
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B
pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C
pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B
pci 0000:02:01.0: sharing IRQ 10 with 0000:04:00.0
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D
pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C
pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:02:01.0: enabling bus mastering
serial 0000:04:00.3: enabling device (0000 -> 0002)
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
serial 0000:04:00.3: PCI INT D -> PIRQ 63, mask deb8, excl 0c20
serial 0000:04:00.3: PCI INT D -> newirq 11
serial 0000:04:00.3: found PCI INT D -> IRQ 11
serial 0000:04:00.3: sharing IRQ 11 with 0000:00:07.2
serial 0000:04:00.3: sharing IRQ 11 with 0000:00:11.0
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
serial 0000:04:00.3: sharing IRQ 11 with 0000:02:00.0
pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B
pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C
pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D
pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C
pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
serial 0000:04:00.3: sharing IRQ 11 with 0000:06:08.2
serial 0000:04:00.3: saving config space at offset 0x0 (reading 0xc11b1415)
serial 0000:04:00.3: saving config space at offset 0x4 (reading 0x100002)
serial 0000:04:00.3: saving config space at offset 0x8 (reading 0x7000200)
serial 0000:04:00.3: saving config space at offset 0xc (reading 0x800000)
serial 0000:04:00.3: saving config space at offset 0x10 (reading 0xd8a00000)
serial 0000:04:00.3: saving config space at offset 0x14 (reading 0xd8600000)
serial 0000:04:00.3: saving config space at offset 0x18 (reading 0xd8800000)
serial 0000:04:00.3: saving config space at offset 0x1c (reading 0x0)
serial 0000:04:00.3: saving config space at offset 0x20 (reading 0x0)
serial 0000:04:00.3: saving config space at offset 0x24 (reading 0x0)
serial 0000:04:00.3: saving config space at offset 0x28 (reading 0x0)
serial 0000:04:00.3: saving config space at offset 0x2c (reading 0xc11b1415)
serial 0000:04:00.3: saving config space at offset 0x30 (reading 0x0)
serial 0000:04:00.3: saving config space at offset 0x34 (reading 0x40)
serial 0000:04:00.3: saving config space at offset 0x38 (reading 0x0)
serial 0000:04:00.3: saving config space at offset 0x3c (reading 0x4ff)
serial 0000:04:00.3: detected caps 00000700 should be 00000500
0000:04:00.3: ttyS2 at MMIO 0xd8a01000 (irq = 11, base_baud = 15625000) is a 16C950/954
lp: driver loaded but no devices found
Non-volatile memory driver v1.3
ppdev: user-space parallel port driver
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
lp0: using parport0 (interrupt-driven).
Floppy drive(s): fd0 is 1.44M, fd1 is 1.2M
loop: module loaded
Uniform Multi-Platform E-IDE driver
pci 0000:00:07.1: runtime IRQ mapping not provided by arch
piix 0000:00:07.1: IDE controller (0x8086:0x7010 rev 0x00)
FDC 0 is a post-1991 82077
piix 0000:00:07.1: not 100% native mode: will probe irqs later
legacy IDE will be removed in 2021, please switch to libata
Report any missing HW support to linux-ide@vger.kernel.org
    ide0: BM-DMA at 0xf000-0xf007
    ide1: BM-DMA at 0xf008-0xf00f
Probing IDE interface ide0...
hda: Maxtor 7245 AT, ATA DISK drive
hda: is on PIO blacklist
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO1
hda: SWDMA2 mode selected
Probing IDE interface ide1...
hdc: MEMOREX CD-MAXX52, ATAPI CD/DVD-ROM drive
hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdc: MWDMA2 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
PIIX_IDE 0000:00:07.1: runtime IRQ mapping not provided by arch
ide-gd driver 1.18
hda: max request size: 128KiB
hda: 479632 sectors (245 MB) w/64KiB Cache, CHS=967/16/31
 hda: hda1 hda2
ide-cd driver 5.00
ide-cd: hdc: ATAPI 52X CD-ROM drive, 128kB Cache
cdrom: Uniform CD-ROM driver Revision: 3.20
pci 0000:00:13.0: PCI INT A -> PIRQ 61, mask deb8, excl 0c20
pci 0000:00:13.0: PCI INT A -> newirq 5
pci 0000:00:13.0: found PCI INT A -> IRQ 5
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B
pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C
pci 0000:00:13.0: sharing IRQ 5 with 0000:02:02.0
pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D
pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C
pci 0000:00:13.0: sharing IRQ 5 with 0000:06:08.0
pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
scsi: ***** BusLogic SCSI Driver Version 2.1.17 of 12 September 2013 *****
scsi: Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter
scsi0:   Firmware Version: 5.07B, I/O Address: 0x6800, IRQ Channel: 5/Level
scsi0:   PCI Bus: 0, Device: 19, Address: 0xE0011000, Host Adapter SCSI ID: 7
scsi0:   Parity Checking: Enabled, Extended Translation: Enabled
scsi0:   Synchronous Negotiation: Ultra, Wide Negotiation: Enabled
scsi0:   Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled
scsi0:   Scatter/Gather Limit: 128 of 8192 segments, Mailboxes: 211
scsi0:   Driver Queue Depth: 211, Host Adapter Queue Depth: 192
scsi0:   Tagged Queue Depth: Automatic, Untagged Queue Depth: 3
scsi0:   SCSI Bus Termination: Both Disabled, SCAM: Disabled
scsi0: *** BusLogic BT-958 Initialized Successfully ***
scsi host0: BusLogic BT-958
scsi 0:0:0:0: Direct-Access     IBM      DDYS-T18350M     SA5A PQ: 0 ANSI: 3
scsi 0:0:1:0: Direct-Access     SEAGATE  ST336607LW       0006 PQ: 0 ANSI: 3
scsi 0:0:4:0: Sequential-Access HP       C5683A           C908 PQ: 0 ANSI: 2
scsi 0:0:5:0: Direct-Access     IOMEGA   ZIP 100          E.08 PQ: 0 ANSI: 2
st: Version 20160209, fixed bufsize 32768, s/g segs 256
st 0:0:4:0: Attached scsi tape st0
st 0:0:4:0: st0: try direct i/o: yes (alignment 4 B)
scsi 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 35843670 512-byte logical blocks: (18.4 GB/17.1 GiB)
scsi 0:0:1:0: Attached scsi generic sg1 type 0
sd 0:0:0:0: [sda] Write Protect is off
st 0:0:4:0: Attached scsi generic sg2 type 1
sd 0:0:0:0: [sda] Mode Sense: cb 00 00 08
scsi 0:0:5:0: Attached scsi generic sg3 type 0
sd 0:0:1:0: [sdb] 71687372 512-byte logical blocks: (36.7 GB/34.2 GiB)
sd 0:0:1:0: [sdb] Write Protect is off
3c59x 0000:00:14.0: runtime IRQ mapping not provided by arch
sd 0:0:1:0: [sdb] Mode Sense: ab 00 10 08
3c59x 0000:00:14.0: PCI INT A -> PIRQ 60, mask deb8, excl 0c20
sd 0:0:5:0: [sdc] Attached SCSI removable disk
3c59x 0000:00:14.0: PCI INT A -> newirq 10
3c59x 0000:00:14.0: found PCI INT A -> IRQ 10
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
3c59x 0000:00:14.0: sharing IRQ 10 with 0000:02:01.0
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C
pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B
 sdb: sdb1 sdb2
3c59x 0000:00:14.0: sharing IRQ 10 with 0000:04:00.0
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D
pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C
sd 0:0:1:0: [sdb] Attached SCSI disk
pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
3c59x: Donald Becker and others.
sd 0:0:0:0: [sda] Attached SCSI disk
0000:00:14.0: 3Com PCI 3c905C Tornado at (ptrval).
3c59x 0000:00:14.0: saving config space at offset 0x0 (reading 0x920010b7)
3c59x 0000:00:14.0: saving config space at offset 0x4 (reading 0x2100007)
3c59x 0000:00:14.0: saving config space at offset 0x8 (reading 0x2000074)
3c59x 0000:00:14.0: saving config space at offset 0xc (reading 0x4008)
3c59x 0000:00:14.0: saving config space at offset 0x10 (reading 0x6c01)
3c59x 0000:00:14.0: saving config space at offset 0x14 (reading 0xe0012000)
3c59x 0000:00:14.0: saving config space at offset 0x18 (reading 0x0)
3c59x 0000:00:14.0: saving config space at offset 0x1c (reading 0x0)
3c59x 0000:00:14.0: saving config space at offset 0x20 (reading 0x0)
3c59x 0000:00:14.0: saving config space at offset 0x24 (reading 0x0)
3c59x 0000:00:14.0: saving config space at offset 0x28 (reading 0x0)
3c59x 0000:00:14.0: saving config space at offset 0x2c (reading 0x100010b7)
3c59x 0000:00:14.0: saving config space at offset 0x30 (reading 0x0)
3c59x 0000:00:14.0: saving config space at offset 0x34 (reading 0xdc)
3c59x 0000:00:14.0: saving config space at offset 0x38 (reading 0x0)
3c59x 0000:00:14.0: saving config space at offset 0x3c (reading 0xa0a010a)
defxx 0000:00:12.0: runtime IRQ mapping not provided by arch
defxx: v1.12 2021/03/10  Lawrence V. Stefani and others
defxx 0000:00:12.0: PCI INT A -> PIRQ 62, mask deb8, excl 0c20
defxx 0000:00:12.0: PCI INT A -> newirq 5
defxx 0000:00:12.0: found PCI INT A -> IRQ 5
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B
pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C
pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D
defxx 0000:00:12.0: sharing IRQ 5 with 0000:06:05.0
pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C
pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D
defxx 0000:00:12.0: sharing IRQ 5 with 0000:06:08.1
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
0000:00:12.0: DEFPA at MMIO addr = 0xe0010000, IRQ = 5, Hardware addr = 00-00-f8-e7-82-24
0000:00:12.0: registered as fddi0
eni 0000:06:05.0: runtime IRQ mapping not provided by arch
eni 0000:06:05.0: enabling device (0000 -> 0002)
pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D
eni 0000:06:05.0: PCI INT A -> PIRQ 62, mask deb8, excl 0c20
eni 0000:06:05.0: PCI INT A -> newirq 5
eni 0000:06:05.0: found PCI INT A -> IRQ 5
eni 0000:06:05.0: sharing IRQ 5 with 0000:00:12.0
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B
pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C
pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D
pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C
pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D
eni 0000:06:05.0: sharing IRQ 5 with 0000:06:08.1
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
eni(itf 0): rev.0,base=0xd8000000,irq=5,
mem=2048kB (
00
-20
-EA
-00
-7A
-04
)
eni(itf 0): ASIC,MMF
eni 0000:06:05.0: enabling bus mastering
eni(itf 0): no signal
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:06:08.2: runtime IRQ mapping not provided by arch
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
ehci-pci 0000:06:08.2: PCI INT C -> PIRQ 63, mask deb8, excl 0c20
ehci-pci 0000:06:08.2: PCI INT C -> newirq 11
ehci-pci 0000:06:08.2: found PCI INT C -> IRQ 11
ehci-pci 0000:06:08.2: sharing IRQ 11 with 0000:00:07.2
ehci-pci 0000:06:08.2: sharing IRQ 11 with 0000:00:11.0
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
ehci-pci 0000:06:08.2: sharing IRQ 11 with 0000:02:00.0
pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B
pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C
pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
ehci-pci 0000:06:08.2: sharing IRQ 11 with 0000:04:00.3
pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D
pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C
pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
ehci-pci 0000:06:08.2: enabling bus mastering
ehci-pci 0000:06:08.2: EHCI Host Controller
ehci-pci 0000:06:08.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:06:08.2: enabling Mem-Wr-Inval
ehci-pci 0000:06:08.2: irq 11, io mem 0xd8420000
ehci-pci 0000:06:08.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.13.0-rc6-00229-g15279ebe99d7-dirty ehci_hcd
usb usb1: SerialNumber: 0000:06:08.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:07.2: runtime IRQ mapping not provided by arch
uhci_hcd 0000:00:07.2: PCI INT D -> PIRQ 63, mask deb8, excl 0c20
uhci_hcd 0000:00:07.2: PCI INT D -> newirq 11
uhci_hcd 0000:00:07.2: found PCI INT D -> IRQ 11
uhci_hcd 0000:00:07.2: sharing IRQ 11 with 0000:00:11.0
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
uhci_hcd 0000:00:07.2: sharing IRQ 11 with 0000:02:00.0
pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B
pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C
pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
uhci_hcd 0000:00:07.2: sharing IRQ 11 with 0000:04:00.3
pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D
pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C
pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
uhci_hcd 0000:00:07.2: sharing IRQ 11 with 0000:06:08.2
uhci_hcd 0000:00:07.2: enabling bus mastering
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:07.2: irq 11, io base 0x00006000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.13
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 5.13.0-rc6-00229-g15279ebe99d7-dirty uhci_hcd
usb usb2: SerialNumber: 0000:00:07.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:06:08.0: runtime IRQ mapping not provided by arch
pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C
uhci_hcd 0000:06:08.0: PCI INT A -> PIRQ 61, mask deb8, excl 0c20
uhci_hcd 0000:06:08.0: PCI INT A -> newirq 5
uhci_hcd 0000:06:08.0: found PCI INT A -> IRQ 5
uhci_hcd 0000:06:08.0: sharing IRQ 5 with 0000:00:13.0
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B
pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C
uhci_hcd 0000:06:08.0: sharing IRQ 5 with 0000:02:02.0
pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D
pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C
pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
uhci_hcd 0000:06:08.0: enabling bus mastering
uhci_hcd 0000:06:08.0: UHCI Host Controller
uhci_hcd 0000:06:08.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:06:08.0: HCRESET not completed yet!
uhci_hcd 0000:06:08.0: irq 5, io base 0x0000fce0
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.13
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 5.13.0-rc6-00229-g15279ebe99d7-dirty uhci_hcd
usb usb3: SerialNumber: 0000:06:08.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19)
uhci_hcd 0000:06:08.1: runtime IRQ mapping not provided by arch
pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D
uhci_hcd 0000:06:08.1: PCI INT B -> PIRQ 62, mask deb8, excl 0c20
uhci_hcd 0000:06:08.1: PCI INT B -> newirq 5
uhci_hcd 0000:06:08.1: found PCI INT B -> IRQ 5
uhci_hcd 0000:06:08.1: sharing IRQ 5 with 0000:00:12.0
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B
pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C
pci 0000:01:00.0: using bridge 0000:00:11.0 INT B to get INT B
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D
uhci_hcd 0000:06:08.1: sharing IRQ 5 with 0000:06:05.0
pci 0000:01:00.0: using bridge 0000:00:11.0 INT C to get INT C
pci 0000:01:00.0: using bridge 0000:00:11.0 INT D to get INT D
pci 0000:01:00.0: using bridge 0000:00:11.0 INT A to get INT A
uhci_hcd 0000:06:08.1: enabling bus mastering
uhci_hcd 0000:06:08.1: UHCI Host Controller
uhci_hcd 0000:06:08.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:06:08.1: irq 5, io base 0x00002000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.13
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 5.13.0-rc6-00229-g15279ebe99d7-dirty uhci_hcd
usb usb4: SerialNumber: 0000:06:08.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usbcore: registered new interface driver uas
usbcore: registered new interface driver usb-storage
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
lec:lane_module_init: lec.c: initialized
mpoa:atm_mpoa_init: mpc.c: initialized
mce: Unable to init MCE device (rc: -5)
IPI shorthand broadcast: enabled
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
EXT4-fs (sda2): mounted filesystem without journal. Opts: (null). Quota mode: disabled.
VFS: Mounted root (ext2 filesystem) readonly on device 8:2.
Freeing unused kernel image (initmem) memory: 424K
Write protecting kernel text and read-only data: 6556k
Run /sbin/init as init process
  with arguments:
    /sbin/init
    emergency
  with environment:
    HOME=/
    TERM=linux
    BOOT_IMAGE=bisect
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
process '/sbin/init' started with executable stack
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
random: fast init done
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
INIT: input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input2
version 2.85 booting
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
Give root password for maintenance
(or type Control-D for normal startup): uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!

Login incorrect.
Give root password for maintenance
(or type Control-D for normal startup): sysrq: HELP : loglevel(0-9) reboot(b) crash(c) terminate-all-tasks(e) memory-full-oom-kill(f) kill-all-tasks(i) thaw-filesystems(j) sak(k) show-backtrace-all-active-cpus(l) show-memory-usage(m) nice-all-RT-tasks(n) poweroff(o) show-registers(p) show-all-timers(q) unraw(r) sync(s) show-task-states(t) unmount(u) show-blocked-tasks(w) 

Login incorrect.
Give root password for maintenance
(or type Control-D for normal startup): sysrq: Resetting
Maciej W. Rozycki March 31, 2022, 7:11 a.m. UTC | #5
On Wed, 2 Mar 2022, Maciej W. Rozycki wrote:

> > > Fix an issue with the Tyan Tomcat IV S1564D system, the BIOS of which 
> > > does not assign PCI buses beyond #2, where our resource reallocation 
> > > code preserves the reset default of an I/O BAR assignment outside its 
> > > upstream PCI-to-PCI bridge's I/O forwarding range for device 06:08.0 in 
> > > this log:
> > 
> > Would you mind collecting the complete dmesg log before your patch?
> > It's hard to get the entire picture from snippets.
> 
>  Sure, here's the original log from at the time when I made the patch.  I 
> think it's as verbose as you can get; there's no way I could have used it 
> for the change description.
> 
>  Also I doubt it should matter, but if you need a fresh log instead from 
> 5.17, then I can make one too, but that will take a bit.  Let me know if 
> you need me to try anything else too.

 Ping for:
<https://lore.kernel.org/all/alpine.DEB.2.21.2202010150100.58572@angie.orcam.me.uk/>

Do you need any further information?

  Maciej
Maciej W. Rozycki April 13, 2022, 10:53 p.m. UTC | #6
On Tue, 1 Feb 2022, Maciej W. Rozycki wrote:

> Fix an issue with the Tyan Tomcat IV S1564D system, the BIOS of which 
> does not assign PCI buses beyond #2, where our resource reallocation 
> code preserves the reset default of an I/O BAR assignment outside its 
> upstream PCI-to-PCI bridge's I/O forwarding range for device 06:08.0 in 
> this log:

 Ping for:
<https://lore.kernel.org/all/alpine.DEB.2.21.2202010150100.58572@angie.orcam.me.uk/>

  Maciej
diff mbox series

Patch

Index: linux-macro/drivers/pci/setup-res.c
===================================================================
--- linux-macro.orig/drivers/pci/setup-res.c
+++ linux-macro/drivers/pci/setup-res.c
@@ -212,9 +212,19 @@  static int pci_revert_fw_address(struct
 	res->end = res->start + size - 1;
 	res->flags &= ~IORESOURCE_UNSET;
 
+	/*
+	 * If we're behind a P2P or CardBus bridge, make sure we're
+	 * inside the relevant forwarding window, or otherwise the
+	 * assignment must have been bogus and accesses intended for
+	 * the range assigned would not reach the device anyway.
+	 * On the root bus accept anything under the assumption the
+	 * host bridge will let it through.
+	 */
 	root = pci_find_parent_resource(dev, res);
 	if (!root) {
-		if (res->flags & IORESOURCE_IO)
+		if (dev->bus->parent)
+			return -ENXIO;
+		else if (res->flags & IORESOURCE_IO)
 			root = &ioport_resource;
 		else
 			root = &iomem_resource;