diff mbox series

[v5,2/4] arm64: dts: ti: j721e: Add VTM node

Message ID 20220412101409.7980-3-j-keerthy@ti.com
State New
Headers show
Series thermal: k3_j72xx_bandgap: Add the bandgap driver support | expand

Commit Message

J, KEERTHY April 12, 2022, 10:14 a.m. UTC 
VTM stands for Voltage Thermal Management

Signed-off-by: Keerthy <j-keerthy@ti.com>
---
 .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi      |  9 +++
 arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi  | 73 +++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-j721e.dtsi          |  4 +
 3 files changed, 86 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi

Comments

J, KEERTHY April 12, 2022, 11:43 p.m. UTC | #1 
On 4/12/2022 10:39 PM, Vignesh Raghavendra wrote:
> Hi Keerthy
> 
> On 12/04/22 3:44 pm, Keerthy wrote:
>> VTM stands for Voltage Thermal Management
>>
>> Signed-off-by: Keerthy <j-keerthy@ti.com>
>> ---
>>   .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi      |  9 +++
>>   arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi  | 73 +++++++++++++++++++
>>   arch/arm64/boot/dts/ti/k3-j721e.dtsi          |  4 +
>>   3 files changed, 86 insertions(+)
>>   create mode 100644 arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
>> index b4972dfb7da8..6290f563b8e7 100644
>> --- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
>> +++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
>> @@ -418,4 +418,13 @@
>>   		interrupt-names = "int0", "int1";
>>   		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
>>   	};
>> +
>> +	wkup_vtm0: wkup_vtm0@42040000 {
>> +		compatible = "ti,j721e-vtm";
>> +		reg = <0x0 0x42040000 0x0 0x350>,
>> +			<0x0 0x42050000 0x0 0x350>,
>> +			<0x0 0x43000300 0x0 0x10>;
> 
> Please follow convention of using 0x00 as rest of the file:

Okay.

> 
> 		reg = <0x00 0x42040000 0x00 0x350>,
> 		....
> 
>> +		power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
>> +		#thermal-sensor-cells = <1>;
>> +	};
>>   };
>> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi
>> new file mode 100644
>> index 000000000000..e922042f356f
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi
>> @@ -0,0 +1,73 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +
>> +#include <dt-bindings/thermal/thermal.h>
>> +
>> +wkup_thermal: wkup_thermal {
>> +	polling-delay-passive = <250>; /* milliseconds */
>> +	polling-delay = <500>; /* milliseconds */
>> +	thermal-sensors = <&wkup_vtm0 0>;
>> +
>> +	trips {
>> +		wkup_crit: wkup_crit {
> 
> 
> Here and elsewhere no "-" in node names please.

I believe you meant no "_" ?

> 
> You can use:
> 
> https://github.com/nmenon/kernel_patch_verify
> kpv -C -n <no of commits>
> 
> This catches most issues like above

Okay

> 
>> +			temperature = <125000>; /* milliCelsius */
>> +			hysteresis = <2000>; /* milliCelsius */
>> +			type = "critical";
>> +		};
>> +	};
>> +};
>> +
>> +mpu_thermal: mpu_thermal {
>> +	polling-delay-passive = <250>; /* milliseconds */
>> +	polling-delay = <500>; /* milliseconds */
>> +	thermal-sensors = <&wkup_vtm0 1>;
>> +
>> +	trips {
>> +		mpu_crit: mpu_crit {
>> +			temperature = <125000>; /* milliCelsius */
>> +			hysteresis = <2000>; /* milliCelsius */
>> +			type = "critical";
>> +		};
>> +	};
>> +};
>> +
>> +c7x_thermal: c7x_thermal {
>> +	polling-delay-passive = <250>; /* milliseconds */
>> +	polling-delay = <500>; /* milliseconds */
>> +	thermal-sensors = <&wkup_vtm0 2>;
>> +
>> +	trips {
>> +		c7x_crit: c7x_crit {
>> +			temperature = <125000>; /* milliCelsius */
>> +			hysteresis = <2000>; /* milliCelsius */
>> +			type = "critical";
>> +		};
>> +	};
>> +};
>> +
>> +gpu_thermal: gpu_thermal {
>> +	polling-delay-passive = <250>; /* milliseconds */
>> +	polling-delay = <500>; /* milliseconds */
>> +	thermal-sensors = <&wkup_vtm0 3>;
>> +
>> +	trips {
>> +		gpu_crit: gpu_crit {
>> +			temperature = <125000>; /* milliCelsius */
>> +			hysteresis = <2000>; /* milliCelsius */
>> +			type = "critical";
>> +		};
>> +	};
>> +};
>> +
>> +r5f_thermal: r5f_thermal {
>> +	polling-delay-passive = <250>; /* milliseconds */
>> +	polling-delay = <500>; /* milliseconds */
>> +	thermal-sensors = <&wkup_vtm0 4>;
>> +
>> +	trips {
>> +		r5f_crit: r5f_crit {
>> +			temperature = <125000>; /* milliCelsius */
>> +			hysteresis = <2000>; /* milliCelsius */
>> +			type = "critical";
>> +		};
>> +	};
>> +};
>> diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
>> index 0e23886c9fd1..6979863eb500 100644
>> --- a/arch/arm64/boot/dts/ti/k3-j721e.dtsi
>> +++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
>> @@ -181,6 +181,10 @@
>>   				 <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3*/
>>   		};
>>   	};
>> +
>> +	thermal_zones: thermal-zones {
>> +		#include "k3-j721e-thermal.dtsi"
>> +	};
> 
> Bit weird representation, any reason why thermal-zones {} cannot be
> moved into k3-j721e-thermal.dtsi?

Okay. This could be moved. This is typically done when we have different 
zones defined under different dtsi files. Like in the case of 
omap5/dra7. The same was followed here. You are right this could be 
moved as we have all the zones under one dtsi.

Regards,
Keerthy

> 
>>   };
>>   
>>   /* Now include the peripherals for each bus segments */
> 
> 
> Regards
> Vignesh
Krzysztof Kozlowski April 13, 2022, 10:14 a.m. UTC | #2 
On 12/04/2022 12:14, Keerthy wrote:
> VTM stands for Voltage Thermal Management
> 
> Signed-off-by: Keerthy <j-keerthy@ti.com>
> ---
>  .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi      |  9 +++
>  arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi  | 73 +++++++++++++++++++
>  arch/arm64/boot/dts/ti/k3-j721e.dtsi          |  4 +
>  3 files changed, 86 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
> index b4972dfb7da8..6290f563b8e7 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
> @@ -418,4 +418,13 @@
>  		interrupt-names = "int0", "int1";
>  		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
>  	};
> +
> +	wkup_vtm0: wkup_vtm0@42040000 {

No, same comments as Rob gave you for bindings patch.

Please fix them in entire patchset, instead of ignoring.


Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
index b4972dfb7da8..6290f563b8e7 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
@@ -418,4 +418,13 @@ 
 		interrupt-names = "int0", "int1";
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
 	};
+
+	wkup_vtm0: wkup_vtm0@42040000 {
+		compatible = "ti,j721e-vtm";
+		reg = <0x0 0x42040000 0x0 0x350>,
+			<0x0 0x42050000 0x0 0x350>,
+			<0x0 0x43000300 0x0 0x10>;
+		power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
+		#thermal-sensor-cells = <1>;
+	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi
new file mode 100644
index 000000000000..e922042f356f
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi
@@ -0,0 +1,73 @@ 
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/thermal/thermal.h>
+
+wkup_thermal: wkup_thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 0>;
+
+	trips {
+		wkup_crit: wkup_crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
+
+mpu_thermal: mpu_thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 1>;
+
+	trips {
+		mpu_crit: mpu_crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
+
+c7x_thermal: c7x_thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 2>;
+
+	trips {
+		c7x_crit: c7x_crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
+
+gpu_thermal: gpu_thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 3>;
+
+	trips {
+		gpu_crit: gpu_crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
+
+r5f_thermal: r5f_thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 4>;
+
+	trips {
+		r5f_crit: r5f_crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
index 0e23886c9fd1..6979863eb500 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
@@ -181,6 +181,10 @@ 
 				 <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3*/
 		};
 	};
+
+	thermal_zones: thermal-zones {
+		#include "k3-j721e-thermal.dtsi"
+	};
 };
 
 /* Now include the peripherals for each bus segments */